Search NASA⌕ Search

SEARCH · Search NASA

Results for “DOORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Test and analysis of a stitched RFI graphite-epoxy panel with a fuel access door

A stitched RFI graphite-epoxy panel with a fuel access door was analyzed using a finite element analysis and loaded to failure in compression. The panel was initially 56-inches long and 36.75-inches wide and the oval access door was 18-inches long and 15-inches wide. The panel was impact damaged with impact energy of 100 ft-lb prior to compressive loading; however, no impact damage was detectable visually or by A-scan. The panel carried a failure load of 695,000 Ib and global failure strain of .00494 in/in. Analysis indicated the panel would fail due to collapse at a load of 688,100 Ib. The test data indicate that the maximum strain in a region near the access door was .0096 in/in and analysis indicates a local surface strain of .010 in/in at the panel's failure load. The panel did not fail through the impact damage, but instead failed through bolt holes for attachment of the access door in a region of high strain.

Jegley, Dawn C.↗
NASA NTRS2000

ACIS Door Failure Investigation and Mitigation Procedures

NASA's Chandra X-ray Observatory (formerly AXAF) was launched on July 23, 1999 and is currently in orbit performing scientific studies. Chandra is the third of NASA's Great Observatories to be launched, following the Hubble Space Telescope and the Compton Gamma Ray Observatory. One of four primary science instruments on Chandra, and one of only two focal plane instruments, is the Advanced CCD Imaging Spectrometer, or ACIS. The ACIS focal plane and Optical Blocking Filter (OBF) must be launched under vacuum, so a tightly sealed, functioning door and venting subsystem were implemented. The door was opened two and one-half weeks after launch (after most out-gassing of composite materials) and allowed X-rays to be imaged by the ACIS CCD's in the focal plane. A failure of this door to open on-orbit would have eliminated all ACIS capabilities, severely degrading mission science. During the final pre-flight thermal-vacuum test of the fully integrated Chandra Observatory at TRW, the ACIS door failed to open when commanded to do so. This paper describes the efforts, under considerable time pressure, by NASA, its contractors and outside review teams to investigate the failure and to develop modified hardware and procedures which would correct the problem. Of interest is the fact that the root cause of the test failure was never clearly identified despite massive effort. We ultimately focussed on hardware and procedures designed to mitigate the effects of potential, but unproven, failure modes. We describe a frequent real-world engineering situation in which one must proceed on the best basis possible in the absence of the complete set of facts.

Podgorski, William A.↗
NASA NTRS2006

Investigations of Shuttle Main Landing Gear Door Environmental Seals

The Columbia Accident investigation Board (CAIB) requested an investigation into the MLG door seals. Initially, the MLG door seals were thought to have been a potential contributor to the loss of Columbia. These suspicions were later found to be untrue, but the seals remained as a cause for concern in future flights. MLG door seals comprised of thermal barrier and environmental seal. This study focuses on the environmental seal for the MLG door.

Finkbeiner, Joshua↗
NASA NTRS2012

SOFIA Closed- and Open-Door Aerodynamic Analyses

Work to evaluate the aerodynamic characteristics and the cavity acoustic environment of the SOFIA (Stratospheric Observatory for Infrared Astronomy) airplane has been completed. The airplane has been evaluated in its closed-door configuration, as well as several open-door configurations. Work performed included: acoustic analysis tool development, cavity acoustic evaluation, stability and control parameter estimation, air data calibration, and external flow evaluation. Qualitative airflow data were obtained during the closed- and open-door flights using tufts on the aft portion of the fuselage. Video was taken from a chase plane. This video was analyzed for various flight conditions, and general flow descriptions of the aft fuselage of the 747SP were developed for the different closed and open door configurations.

Cumming, Stephen↗
NASA NTRS1966

Simple motor drive system operates heavy hinged door

Motor drive system remotely operates heavy steel radiation shielding doors. The drive consists of a standard motor reducer unit which is mounted on the door. This reducer drives a sprocket which is linked by chain to a fixed sprocket of the same size on the door jamb.

Pitkin, R. G.↗
NASA NTRS1971

Passive rejection of heat from an isotope heat source through an open door

The isotope heat-source design for a Brayton power system includes a door in the thermal insulation through which the heat can be passively rejected to space when the power system is not operating. The results of an analysis to predict the heat-source surface temperature and the heat-source heat-exchanger temperature during passive heat rejection as a function of insulation door opening angle are presented. They show that for a door opening angle greater than 20 deg, the temperatures are less than the steady-state temperatures during power system operation.

Burns, R. K.↗
NASA NTRS1972

Evaluation of metal landing gear door assembly selectively reinforced with filamentary composite for space shuttle application

The development and evaluation of a main landing gear door for space shuttle applications are discussed. The door is constructed on composite materials using a rib-stiffened titanium panel selectively reinforced with boron/epoxy composite. A weight comparison between the hybrid design and the all-titanium baseline design showed a weight saving of approximately fifteen percent. Detailed descriptions of the door structure and method of manufacture are presented.

Kong, S. J.↗
NASA NTRS1982

CAM controlled retractable door latch

A latching mechanism in which there is linear movement and rotational movement is described. The umbilical doors of the space shuttle orbiter are required to be open during vehicle launch. After the external tank is released, the doors are closed. Presently, the device for maintaining the doors in an open position is mounted on the external tank and therefore has a single mission life. The latching mechanism of the invention is mounted in the orbiter and therefore is returned and has multimission capability. The latching mechanism is comprised of a pair of concentric nested, cylindrical cams and motors to actuate the cams, and latch pin all contained within a cover mounted on a support bracket carried by the substructure. A shaft having a latch pin is mounted inside the inner cylindrical cam.

Carsley, R. B.↗
NASA NTRS1988

Cavity door effects on aerodynamic loadings of compressed-carriage store configurations separating from cavities at supersonic speeds

An experimental wind-tunnel investigation has been conducted at supersonic Mach numbers to determine the effects of cavity doors on the aerodynamic characteristics of compressed-carriage store configurations during separation from a shallow box cavity (closed cavity flow) located in a simulated generic parent aircraft. The tests were conducted in the Langley Unitary Plan Wind Tunnel at free-stream Mach numbers of 1.70, 2.00, and 2.65 for a constant Reynolds number per foot of two million. Results are summarized to show the effects of cavity door opening angles, vertical door height, folded and unfolded tail fins, and Mach number on the near-field aerodynamic separation characteristics of a single missile-type store with in-line cruciform wings and tail fins.

Blair, A. B., Jr.↗
NASA NTRS2007

Investigation of MMOD Impact on Shuttle Payload Bay Door Radiator

Post flight inspections on the Space Shuttle Atlantis conducted after the STS-115 mission revealed a 0.11 inch (2.8 mm) hole in the outer facesheet of the starboard payload bay door radiator panel #4. This hole is the possible result of micrometeoroid/orbiting debris (MMOD) impact. The payload bay door radiators in this region are 0.5 inch (12.7 mm) thick aluminum honeycomb with 0.011 in (0.279 mm) thick aluminum facesheets topped with 0.005 in (0.127 mm) silver-Teflon tape. Inner facesheet damage included a 0.267 in (6.78 mm) long through crack with measurable deformation in the area of 0.2 in (5.1 mm). There was also a 0.031 in (0.787 mm) diameter hole in the rear facesheet. A large approximately 1 in (25 mm) diameter region of honeycomb was also destroyed. Since the radiators are located on the inside of the shuttle payload bay doors which are closed during ascent and reentry, the damage could only have occurred during the on-orbit portion of the mission. This paper will document the data collected from the impact site and will include results of the SEM/EDX analysis. Evidence will be presented that suggests a source of the impact as well as an analysis of the impact site features that indicate projectile directionality. Results of hypervelocity impact testing on representative samples in an attempt to simulate the impact event will be presented and discussed. Finally, the results of a study showing the regions of the orbiter vehicle that would be vulnerable to an equivalent projectile will be given.

Hyde, J. L.↗
DOE OSTI2025

Restructuring and Optimizing Reactor Building Lifting Processes & Designing a Solution for an Overhead Door Handling Forklift Attachment

This poster presents two innovative projects aimed at enhancing operational efficiency and safety at the Advanced Test Reactor (ATR) Complex. The first project focuses on restructuring the existing lift book used for hoisting operations within the ATR Reactor Building. The current lift book, a cumbersome 150+ page document, is being transformed into a more efficient format using charts that allow for quick identification of maximum lift heights based on object footprint and weight. This new method also considers various parameters such as floor integrity and reactor status, dividing entries into four distinct charts to improve usability and safety during lifts. The second project involves designing a specialized forklift attachment for handling an overhead door at the ATR Reactor Building. The attachment is engineered to securely lift and lower a 1200lb, 14ft long door, ensuring safe replacement operations. The design process included research on forklift attachment codes, modeling in Autodesk Inventor, and testing through Finite Element Analysis (FEA) and hand calculations to confirm the attachment's structural integrity. Future work includes completing detailed drawings and an Engineering Calculations Analysis and Review (ECAR) document to proceed with manufacturing and assembly. Together, these projects demonstrate a commitment to optimizing reactor building operations through innovative engineering solutions and safety considerations.

42 - ENGINEERING↗
NASA NTRS1973

Graphite-epoxy door development for application to Space Shuttle.

The results of development of an advanced composite door landing-gear assembly are summarized. The development program consisted of design, analysis, fabrication, and structural testing of a door sector assembly designed to the operating loads expected for the Phase B Space Shuttle orbiter.

Kam, C. Y.↗
NASA NTRS1976

Design concepts for a composite door frame system for general automotive applications

Conceptual design, manufacturing process, and costs are explored to determine the feasibility of replacing present steel parts in automotive door structures with various composite materials. The problems of conforming to present anti-intrusion specifications with advanced materials are examined and discussed. Modest weight reductions, at competitive costs, were identified for the utilization of specific composite materials in automotive door structures.

Tauber, J. A.↗
NASA NTRS1980

Clamshell door system

Space shuttle system opens, closes, and latches bay doors. System includes remotely controlled "zipper latch" that accomodates misalignment. Opening, closing, and latching follow specific sequences, and are monitored from cockpit. Entire system could be modified for commercial jetliners and marine vessels with underwater access doors.

Helble, D. R.↗
NASA NTRS1982

Centerline latch tool for contingency orbiter door closure

The centerline latch tool was designed and developed as an EVA manual backup device for latching the Space Shuttle Orbiter's payload bay doors for reentry in case of a failure of the existing centerline latches to operate properly. The tool was designed to satisfy a wide variety of structural, mechanical, and EVA requirements. It provides a load path for forces on the payload bay doors during reentry. Since the tool would be used by an EVA crewmember, control, handgrips, operating forces, and procedures must be within the capabilities of a partially restrained, suited crewmember in a zero-gravity environment. The centerline latch tool described was designed, developed, and tested to meet these requirements.

Trevino, R. C.↗
NASA NTRS1988

Door Opens Four Ways

Concept based on poppable hinges. Hinge system allows door to swing open on any of four edges. Proposed system consists of four separable ball joints resembling "pop-it" beads, one at each corner of door. Made of molded plastic, joints cheap to make and install.

Morrison, Andrew D.↗
NASA NTRS1995

Vacuum Door For Testing A Spacecraft X-Ray Camera

Report describes vacuum door to provide environmental protection of x-ray camera aboard spacecraft, and to provide access to camera for pre-launch testing. Door seals one side of chamber and encloses vacuous or dry gas environment needed to protect camera.

Mcqueen, Donald H., Jr.↗
NASA NTRS1990

STS-41: Discovery Payload Bay Door Investigation

The brief footage shows the visual inspection of the bay door by 2 technicians. They inspect the layers between the panels for structural defects, and the door, joints, and hinges for wear, cracks, stress, and damage from flight.

Source record↗