Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data, Modeling, and Analysis Program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Science Support for Space-Based Droplet Combustion: Drop Tower Experiments and Detailed Numerical Modeling

This program supports the engineering design, data analysis, and data interpretation requirements for the study of initially single component, spherically symmetric, isolated droplet combustion studies. Experimental emphasis is on the study of simple alcohols (methanol, ethanol) and alkanes (n-heptane, n-decane) as fuels with time dependent measurements of drop size, flame-stand-off, liquid-phase composition, and finally, extinction. Experiments have included bench-scale studies at Princeton, studies in the 2.2 and 5.18 drop towers at NASA-LeRC, and both the Fiber Supported Droplet Combustion (FSDC-1, FSDC-2) and the free Droplet Combustion Experiment (DCE) studies aboard the shuttle. Test matrix and data interpretation are performed through spherically-symmetric, time-dependent numerical computations which embody detailed sub-models for physical and chemical processes. The computed burning rate, flame stand-off, and extinction diameter are compared with the respective measurements for each individual experiment. In particular, the data from FSDC-1 and subsequent space-based experiments provide the opportunity to compare all three types of data simultaneously with the computed parameters. Recent numerical efforts are extending the computational tools to consider time dependent, axisymmetric 2-dimensional reactive flow situations.

Marchese, Anthony J.↗
NASA NTRS1997

Attributes of GRB Pulses: Analysis of BATSE TTE Data

Our extensive program of modeling GRB profiles is aimed at elucidating the physical processes responsible for the burst itself, as well as possible extrinsic phenomena (e.g. time dilation) as discussed in another paper in this Symposium (Norris et al., "GRB PROFILES AS COSMIC PROBES"). We have developed special methods to extract the wealth of short time-scale information contained in the BATSE time-tag event (TTE) data. Our algorithm yields a piecewise-constant representation of the light curve -- using only the raw photon arrival times, and based on Bayesian change-point methods. This representation in effect lets the data determine the bin size and location, and avoids unwanted effects due to arbitrary choices of the bin parameters. We have determined widths, separations, and amplitudes of pulses contained in the bursts, without invoking a specific pulse model. The effect of cosmic time dilation can be easily seen in a direct plot of amplitude vs. time scale for individual pulses, without the need to lump the data into a small number of brightness classes. We are also performing noise equalization on these data (to reduce a well-known bias of pulse width as a function of signal-to-noise ratio), as well as fits of parametric pulse-shape models -- including explicit energy dependence of the pulse parameters. Such refinements are expected to improve the quality and physical significance of these results.

Norris, J. P.↗
NASA NTRS1990

PATRAN-STAGS translator (PATSTAGS)

A a computer program used to translate PATRAN finite element model data into Structural Analysis of General Shells (STAGS) input data is presented. The program supports translation of nodal, nodal constraints, element, force, and pressure data. The subroutine UPRESS required for the readings of live pressure data into STAGS is also presented.

Otte, Neil↗
NASA NTRS1989

A visiting scientist program in atmospheric sciences for the Goddard Space Flight Center

A visiting scientist program was conducted in the atmospheric sciences and related areas at the Goddard Laboratory for Atmospheres. Research was performed in mathematical analysis as applied to computer modeling of the atmospheres; development of atmospheric modeling programs; analysis of remotely sensed atmospheric, surface, and oceanic data and its incorporation into atmospheric models; development of advanced remote sensing instrumentation; and related research areas. The specific research efforts are detailed by tasks.

Davis, M. H.↗
NASA NTRS1984

Measurement and analysis of acoustic flight test data for two advanced design high speed propeller models

The recent test program, in which the SR-2 and SR-3 Prop-Fan models were acoustically tested in flight, is described and the results of analysis of noise data acquired are discussed. The trends of noise levels with flight operating parameters are shown. The acoustic benefits of the SR-3 design with swept blades relative to the SR-2 design with straight blades are shown. Noise data measured on the surface of a small-diameter microphone boom mounted above the fuselage and on the surface of the airplane fuselage are compared to show the effects of acoustic propagation through a boundary layer. Noise level estimates made using a theoretically based prediction methodology are compared with measurements.

Brooks, B. M.↗
NASA NTRS1992

MODE: Structural Test Article (STA)

Viewgraphs on the Middeck 0-gravity Dynamics Experiment (MODE): Structural Test Article (STA) are presented. Topics covered include: MODE: structural test article motivation; hardware; sensors and actuators; experimental support module; data; preliminary results; supporting analysis program; and modeling approach.

Crawley, Edward F.↗
NASA NTRS1993

ISAC - A tool for aeroservoelastic modeling and analysis

This paper discusses the capabilities of the Interaction of Structures, Aerodynamics, and Controls (ISAC) system of program modules. The major modeling, analysis, and data management components of ISAC are identified. Equations of motion are displayed for a Laplace-domain representation of the unsteady aerodynamic forces. Options for approximating a frequency-domain representation of unsteady aerodynamic forces with rational functions of the Laplace variable are shown. Linear time invariant state-space equations of motion that result are discussed. Model generation and analyses of stability and dynamic response characteristics are shown for an aeroelastic vehicle which illustrate some of the capabilities of ISAC as a modeling and analysis tool for aeroelastic applications.

Adams, William M., Jr.↗
NASA NTRS2001

Studies of Tenuous Planetary Atmospheres

In order to understand the physical and chemical processes which produce the tenuous planetary and planetary satellite (upper) atmospheres through interactions with their particle, field, and radiation environs, it is necessary to analyze remotely observed and spacecraft data with physically meaningful models. With this in mind, we have undertaken a coupled program of theoretical modeling and complementary data analysis regarding the global distributions of neutral and ionized gases in, and escape from, tenuous planetary atmospheres of Io and Europa. The theoretical models developed will have further applications to other tenuous atmospheres such as that of Pluto and Titan or the upper atmospheres of the terrestrial planets.

Combi, Michael R.↗
NASA NTRS1984

A modeling analysis program for the JPL table mountain Io sodium cloud

A data quality review for the entire set of the 1981 Region B/C images has been completed and is presented. The review indicates that almost all images are of sufficient quality to be valuable in our analysis of this data set. Five data-correlation studies for the same data set have also been completed and are useful in classifying and studying the sodium cloud morphology and its interactions with solar radiation pressure and the plasma torus. Additional progress in developing new image processing techniques and in improving the Io sodium cloud model is also discussed.

Smyth, W. H.↗
NASA NTRS1990

Test plan pressure fed thrust chamber technology

Aerojet is developing the technology for the design of a reliable, low cost, efficient, and lightweight LOX/RP-1 pressure fed engine. This technology program is a direct result of Aerojet's liquid rocket booster (LRB) study and previous NASA studies that identified liquid engines using high bulk density hydrocarbon fuels as very attractive for a space transportation system (STS). Previous large thrust LOX/RP-1 engine development programs were characterized by costly development problems due to combustion instability damage. The combustion stability solution was typically obtained through trial and error methods of minimizing instability damage by degrading engine performance. The approach to this program was to utilize existing and newly developed combustion analysis models and design methodology to create a thrust chamber design with features having the potential of producing reliable and efficient operation. This process resulted in an engine design with a unique high thrust-per-element OFO triplet injector utilizing a low cost modular approach. Cost efficient ablative materials are baselined for the injector face and chamber. Technology demonstration will be accomplished through a hot fire test program using appropriately sized subscale hardware. This subscale testing will provide a data base to supplement the current industry data bank and to anchor and validate the applied analysis models and design methodology. Once anchored and validated, these analysis models and design methodology can be applied with greatly increased confidence to design and characterize a large scale pressure fed LOX/RP-1 thrust chamber. The objective of this test program is to generate a data base that can be used to anchor and validate existing analysis models and design methodologies and to provide early concept demonstration of a low cost, efficient LOX/RP-1 thrust chamber. Test conditions and hardware instrumentation were defined to provide data sufficient to characterize combustion stability, performance, and thermal operation over a wide thrust chamber throttling range.

Dunn, Glenn↗
NASA NTRS1985

Space station ECLSS integration analysis: Simplified General Cluster Systems Model, ECLS System Assessment Program enhancements

The data base verification of the ECLS Systems Assessment Program (ESAP) was documented and changes made to enhance the flexibility of the water recovery subsystem simulations are given. All changes which were made to the data base values are described and the software enhancements performed. The refined model documented herein constitutes the submittal of the General Cluster Systems Model. A source listing of the current version of ESAP is provided in Appendix A.

Ferguson, R. E.↗
NASA NTRS1993

An astrophysics data program investigation of spatial structure of supernova remnants

The final report on astrophysics data program investigation of spatial structure of supernova remnants for the period 1 Aug. 1989 to 31 Jul. 1991 is presented. The goal of the project was the study of the spatial structure of supernova remnants (SNR's) as observed in the x-ray band. A number of software tools were developed for the analysis: (1) a program to fit various geometric models to high resolution x-ray data, and (2) programs for Fourier Transform analysis of clumping in SNR's. These programs were applied to high resolution imager (HRI) data on the young galactic SNR's Tycho and Kepler with some success.

Hughes, John P.↗
NASA NTRS1988

Evaluation of structural integrity using integrated testing and analysis

An integrated approach to dynamic testing and mathematical model analysis is described. The overall approach addresses four key tasks, namely, pretest planning and analysis, test data acquisition, data reduction and analysis, and test/analysis correlation and mathematical model updates. Several key software programs are employed to accomplish this task. They are a leading finite element code, a sophisticated data analysis processor and a graphical pre- and post-processor along with an advanced interface utility. Several practical structures are used to illustrate tools and concepts employed in the integrated test analysis process.

Coppolino, Robert N.↗
NASA NTRS1985

Theoretical interpretation of thermal arrest data from differential thermal analysis measurements

A theory was developed to interpret the thermal arrest data of HgCdTe system from differential thermal analysis measurements. A nonlinear regression program is used to model fit the data. The purpose is to obtain a set of parameters which will give the information about average radiation coefficient, latent heat of fussion, and specific heat of the HgCdTe system at various compositions. The liquidus and solidus at various compositions are also obtained. The heat radiation from the furnace, heat radiation from the system, heat capacity from both the system and the quartz tube and the heat of fusion of the system are considered, however, it neglects heat transfer through conduction and convection.

Wang, J. C.↗
NASA NTRS1984

Interactive modeling using the PATRAN-G program

PATRAN-G is an interactive finite element generating and graphics display program. The program is currently executable on the VAX or PRIME computers and is compatible with 19 commercially available graphics terminals. The PATRAN program can be used in two modes: generation of a finite element model, or postprocessing of output data from a finite element analysis program. The finite element generating mode is divided into two phases. Phase I is the geometry construction. During this phase, the geometric boundaries of the model are defined and the material properties are input. Mirror imaging, translation and scaling of lines, surfaces, and volumes, and rotation of regions permit the geometry to be described efficiently. Points may be defined in alternate rectangular, cylindrical, or spherical coordinate systems. Also, PATRAN-G can calculate the intersection of lines or surfaces. This capability allows a user to easily model, for example, the intersection of a cylinder which cuts through a sphere at an angle. Once the geometry of the model has been described in terms of points, lines, surfaces, and volumes. Phase II is used to generate the computer finite element model.

Stalnaker, W. A.↗
NASA NTRS1983

Integration of Landsat data into the Saginaw River Basin geographic information system

One of the objectives of the Saginaw River Basin study is related to the development of a computer model to predict flood damages. The computer model is to be operational in June 1985. In order to achieve this objective, the input of land-use data into a data base consisting of 198,000 grid cells will be required. A planning technique using Spatial Analysis Methodology (SAM) was developed by the Corps of Engineers Hydrologic Engineering Center (HEC) to systematically handle these data. The HEC-SAM system uses the spatially oriented map data in a series of data management and analysis software programs for input to the Corps hydrologic and environmental models. Attention is given to data base development, Landsat digital data, the placement of the Landsat data into the grid cell data base, and the development of the land cover classification. The Landsat-2 MSS scene covering 85 percent of the Saginaw River Basin was geometrically corrected to a UTM coordinate system.

Mckim, H. L.↗
NASA NTRS2003

ISO Key Project: Exploring the Full Range of Quasar/Agn Properties

While most of the work on this program has been completed, as previously reported, the portion of the program dealing with the subtopic of ISO LWS data analysis and reduction for the LWS Extragalactic Science Team and its leader, Dr. Howard Smith, is still active. This program in fact continues to generate results, and newly available computer modeling has extended the value of the datasets. As a result the team requests a one-year no-cost extension to this program, through 31 December 2004. The essence of the proposal is to perform ISO spectroscopic studies, including data analysis and modeling, of star-formation regions using an ensemble of archival space-based data from the Infrared Space Observatory's Long Wavelength Spectrometer and Short Wavelength Spectrometer, but including as well some other spectroscopic databases. Four kinds of regions are considered in the studies: (1) disks around more evolved objects; (2) young, low or high mass pre-main sequence stars in star-formation regions; (3) star formation in external, bright IR galaxies; and (4) the galactic center. One prime focus of the program is the OH lines in the far infrared. The program has the following goals: 1) Refine the data analysis of ISO observations to obtain deeper and better SNR results on selected sources. The ISO data itself underwent 'pipeline 10' reductions in early 2001, and additional 'hands-on data reduction packages' were supplied by the ISO teams in 2001. The Fabry-Perot database is particularly sensitive to noise and slight calibration errors; 2) Model the atomic and molecular line shapes, in particular the OH lines, using revised Monte-Carlo techniques developed by the SWAS team at the Center for Astrophysics; 3) Attend scientific meetings and workshops; 4) Perform E&PO activities related to infrared astrophysics and/or spectroscopy.

Wilkes, Belinda↗
NASA NTRS2001

Assessment of the Contribution of the Atmosphere to Uncertainties in Normalized Water-Leaving Radiance: A Combined Modeling and Data Analysis Approach

Our research for the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) program has been focused on modeling and simulation studies as well as the development of atmospheric correction algorithms. Based on our original proposal and discussions at the SIMBIOS team meetings and workshops, the objectives of our research can be summarized as follows: (1) Use our radiative transfer model for the coupled atmosphere-ocean system to simulate the radiation field at arbitrary levels and in any desired direction in the atmosphere and ocean so as to provide a firm connection between the signal received by the satellite sensor and by a sensor looking down into the water column just above the surface and just below it; (2) Use the simulations to quantify the influence of atmospheric aerosols on the water-leaving radiance, and to quantify the error in the water-leaving radiance as a function of uncertainties in the aerosol optical properties, mass loading and vertical extent; (3) Use the model simulations in conjunction with validation measurements taken by other SIMBIOS investigators (for satellite overpasses) to assess our understanding of the radiative transfer process in the coupled atmosphere-ocean column, and to examine the extent to which the model provides a realistic prediction of simultaneously measured in situ water-leaving radiance and the radiance received by the satellite sensor; (4) Modify and improve an existing atmospheric correction algorithm, based on the work above, as needed by constructing new look-up tables that include scattering by ocean particles; and (5) Carry out approaches to developing an atmospheric correction algorithm for ocean color imagery with strongly absorbing aerosols.

Stamnes, Knut↗