SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Diisopropyl peroxydicarbonate dissolved in liquid perfluorobutadiene is conducted in a sealed vessel at the autogenous pressure of polymerization. Reaction temperature, ratio of catalyst to monomer, and amount of agitation determine degree of polymerization and product yield.
Degradation of insulation paper is a key contributor to the failure of power transformers. Insulation degradation accelerates at elevated temperatures, which highlights the potential for better thermal management to prolong life. While several studies have analyzed the benefits of high thermal conductivity oil for reducing temperatures inside a transformer, this study is an initial assessment of the benefits of high thermal conductivity paper on transformer life. Blending particulates with cellulosic fibers offers a pathway for high thermal conductivity paper (with good dielectric properties), which can reduce internal temperatures. Presently, life extensions that can be achieved by the use of such thermally conducting papers were estimated, with the thermal conductivity of the paper being the key parameter under study. The analytical-numerical thermal model used in this study was validated against experimental measurements in a distribution transformer, adding confidence to the utility of the model. This model was then used to provide estimates of hot-spot temperature reduction resulting from the use of papers with higher thermal conductivity than baseline. Transformer life was predicted conventionally by tracking the degree of polymerization of paper over time, based on an Arrhenius model. Results indicate that increasing the thermal conductivity of paper from 0.2 W/mK (baseline) to 1W/mK reduces the hot spot temperature by 10°C. While degradation significantly depends on the moisture and oxygen content, the model shows that such a temperature reduction can increase life for all conditions, by as much as a factor of three.
The polymerization of alanine adenylate in the presence of the sodium form of various clays was studied, and hectorite was found to cause more polymerization than nontronite and montmorillonite (in that order) although the differences were not great. The effect on polymerization of presaturating montmorillonite with different cations was determined. Hectorite, with increased basicity of the interspatial planes, allows polymerization of lysine, which montmorillonite does not. The general trend is that, for the same amino acid, higher degrees of polymerization are obtained when the cation in the octahedral lattice of the clay is divalent rather than trivalent. With the exchangeable cations the order is reversed, for a reason that is explained. The main role of clays in the polymerization mechanism of amino acids is concentration and neutralization of charges.
High-throughput polymer synthesis enables rapid exploration of chemical space but remains limited by batch-to-batch inconsistencies that can obscure structure–property relationship trends. To address this challenge, we developed a synthetic approach to produce multifunctional copolymers using post-polymerization modification of activated ester modular polymers with commercially available amines. Easily derivitized parent polymers—poly(tetrafluorophenyl acrylate) and poly(tetrafluorophenyl styrene sulfonate)—were synthesized by RAFT polymerization to yield single polymer batches containing highly reactive tetrafluorophenyl esters or sulfonate esters on each repeat unit. Tuning post-polymerization modification reaction conditions enabled the addition of sub-stoichiometric amounts of amines (relative to the repeat unit) to yield partially functionalized intermediates that could then be further derivatized. Reaction monitoring by 19 F NMR spectroscopy confirmed good control over these sequential post-polymerization modifications. This synthetic route produced a variety of copolymers with defined comonomer ratios while preserving the underlying polymer structure (degree of polymerization, dispersity, tacticity) for both the acrylate and styrene sulfonate backbones. We further applied this approach in a divergent manner to create a small library of structurally distinct copolymers from a single parent batch in three synthetic steps. This modular, divergent synthesis demonstrates a general route to structurally consistent copolymer libraries that enable systematic studies of structure–property relationships and can accelerate functional materials discovery.
π-conjugated polymers (CPs) that are concurrently soft and stretchable are needed for deformable electronics. Molecular-level modification of indacenodithiophene (IDT) copolymers, a class of CPs that exhibit high hole mobilities (μ hole ), is an approach that can help realize intrinsically soft and stretchable CPs. Numerous examples of design strategies to adjust the stretchability of CPs exist, but imparting softness is comparatively less studied. In this study, a systematic molecular weight (MW) series is constructed on a promising candidate for soft CPs, poly(indacenodithiophene-co-thienopyrroledione) (p(IDT C16- TPD C8 )), by optimizing direct arylation polymerization conditions in hopes of improving stretchability and μhole without significantly impacting softness. We found p(IDT C16- TPD C8 ) at a degree of polymerization of 32 shows high stretchability (crack onset strain, CoS > 100%) without significantly impacting softness (elastic modulus, E = 32 MPa), which to the best of our knowledge outperforms previously reported stretchable and soft CPs. To further study how molecular-level modifications impact polymer properties, a MW series of a new extended donor unit polymer, poly(indacenodithienothiophene-co-thienopyrroledione) (p(IDTT C16- TPD C8 )), was synthesized. The IDTT C16 copolymers did not result in a greater average μ hole when comparing between p(IDTT C16- TPD C8 ) and p(IDT C16- TPD C8 ) despite their higher crystallinity observed by GIWAXS. While these findings warrant further investigation, this study points toward unique charge transport properties of IDT-based polymers.
Abstract Homogeneous gold (Au) complexes have demonstrated tremendous utility in modern organic chemistry; however, their application for the synthesis of polymers remains rare. Herein, we demonstrate the first catalytic application of Au complexes toward the polycondensation of alkyne‐containing comonomers and heteroarene nucleophiles. Polymerization occurs through successive intermolecular hydroarylation reactions to produce high molecular weight aromatic copolymers with 1,1‐disubstituted alkene backbone linkages. Clear correlations between the rate and degree of polymerization (DP) were established based on catalyst structure and counterion pairing, thus enabling polymerization reactions that proceeded with remarkable efficiency, high reactivity, and exceptional DPs. The reactivity is broad in scope, enabling the copolymerization of highly functionalized aromatic and aliphatic monomers. These results highlight the untapped utility of Au catalysis in providing access to new macromolecular constructs.
Homogeneous gold (Au) complexes have demonstrated tremendous utility in modern organic chemistry; however, their application for the synthesis of polymers remains rare. Herein, we demonstrate the first catalytic application of Au complexes toward the polycondensation of alkyne-containing comonomers and heteroarene nucleophiles. Polymerization occurs through successive intermolecular hydroarylation reactions to produce high molecular weight aromatic copolymers with 1,1-disubstituted alkene backbone linkages. Clear correlations between the rate and degree of polymerization (DP) were established based on catalyst structure and counterion pairing, thus enabling polymerization reactions that proceeded with remarkable efficiency, high reactivity, and exceptional DPs. The reactivity is broad in scope, enabling the copolymerization of highly functionalized aromatic and aliphatic monomers. Furthermore, these results highlight the untapped utility of Au catalysis in providing access to new macromolecular constructs.
The spontaneous polymerization of amino acid adenylates on Na-montmorillonite in dilute, neutral suspension, after polypeptides were adsorbed on the clay, is studied. It is found that the degrees of polymerization of the oligopeptides and polypeptides obtained is dependent on the amounts of polypeptides that were preadsorbed. It is concluded that a catalytic activity may derive from c-spacings that offer adsorption sites for the reagent amino acid adenylate within the peripheral recesses of irregularly stacked clay platelets by bringing the anhydride bonds and neutral amino groups into favorable reaction distances.
We probe the ion mobilities, transference numbers, and inverse Haven ratio of ionic liquids and polymerized ionic liquids as a function of their molecular weight using a combination of atomistic equilibrium and nonequilibrium molecular dynamics simulations. In contrast to expectations, we demonstrate that the inverse Haven ratio increases with increasing degree of polymerization (N) and then decreases at larger N. For a fixed center of mass reference frame, we demonstrate that such results arise as a consequence of the strong cation–cation correlated motions, which exceed (in magnitude) the selfdiffusivity of cations. Together, our findings challenge the premise underlying the pursuit of pure polymeric ionic liquids as high transference number, single-ion conducting electrolytes.
Bottlebrush random copolymers (BRCPs), consisting of a random distribution of two homopolymer chains along a backbone, can segregate to the interface between two immiscible homopolymers. BRCPs undergo a reconfiguration, where each block segregates to one of the homopolymer phases, adopting a Janus-type structure, reducing the interfacial tension and promoting adhesion between the two homopolymers, thereby serving as a Janus bottlebrush copolymer (JBCP) compatibilizer. Here, we synthesized a series of JBCPs by copolymerizing deuterated or hydrogenated polystyrene (DPS/PS) and poly(tert-butyl acrylate) (PtBA) macromonomers using ruthenium benzylidene-initiated ring-opening metathesis polymerization (ROMP). Subsequent acid-catalyzed hydrolysis converted the PtBA brushes to poly(acrylic acid) (PAA). The JBCPs were then placed at the interface between DPS/PS homopolymers and poly(2-vinyl pyridine) (P2VP) homopolymers, where the degree of polymerization of the backbone (N BB ) and the grafting density (GD) of the JBCPs were varied. Neutron reflectivity (NR) was used to determine the interfacial width and segmental density distributions (including PS homopolymer, PS block, PAA block and P2VP homopolymer) across the polymer-polymer interface. Our findings indicate that the star-like JBCP with N BB = 6 produces the largest interfacial broadening. Increasing N BB to 100 (rod-like shape) and 250 (worm-like shape) reduced the interfacial broadening due to a decrease in the interactions between blocks and homopolymers by stretching of blocks. Decreasing the GD from 100% to 80% at N BB = 100 caused an increase the interfacial width, yet further decreasing the GD to 50% and 20% reduced the interfacial width, as 80% of GD may efficiently increase the flexibility of blocks and promote interactions between homopolymers, while maintaining relatively high number of blocks attached to one molecule. The interfacial conformation of JBCPs was further translated into compatibilization efficiency. Thin film morphology studies showed that only the lower N BB values (N BB = 6 and N BB = 24) and the 80% GD of N BB = 100 had bicontinuous morphologies, due to a sufficient binding energy that arrested phase separation, supported by mechanical testing using asymmetric double cantilever beam (ADCB) tests. These provide fundamental insights into the assembly behavior of JBCPs compatibilizers at homopolymer interfaces, opening strategies for the design of new BCP compatibilizers.
Various enzymes can be used to modify the structure of hemicelluloses directly in vivo or following extraction from biomass sources, such as wood and agricultural residues. Generally, these enzymes can contribute to designer hemicelluloses through four main strategies: (1) enzymatic hydrolysis such as selective removal of side groups by glycoside hydrolases (GH) and carbohydrate esterases (CE), (2) enzymatic cross-linking, for instance, the selective addition of side groups by glycosyltransferases (GT) with activated sugars, (3) enzymatic polymerization by glycosynthases (GS) with activated glycosyl donors or transglycosylation, and (4) enzymatic functionalization, particularly via oxidation by carbohydrate oxidoreductases and via amination by amine transaminases. Thus, this Perspective will first highlight enzymes that play a role in regulating the degree of polymerization and side group composition of hemicelluloses, and subsequently, it will explore enzymes that enhance cross-linking capabilities and incorporate novel chemical functionalities into saccharide structures. These enzymatic routes offer a precise way to tailor the properties of hemicelluloses for specific applications in biobased materials, contributing to the development of renewable alternatives to conventional materials derived from fossil fuels.
In this study, one-component (“all-in-one”) fluorosilicone pastes specifically designed for application in direct ink write (DIW) additive manufacturing (AM) have been developed. They consist of vinyl-functional, methyltrifluoropropyl-containing (MeTfpS) terpolysiloxane base polymer(s), hydrosilyl-functional cross-linker(s), UV-sensitive hydrosilylation catalyst, thixotropic additive, and trimethylsilylated fumed silica filler, with other additives that are optional. Their base polymers were completely amorphous and linear, with molecular weights (M n ) ranging from approximately 7000 to 50,000 and specifically targeted for the viscosity range ideal for DIW. These polymers were prepared by anionic ring-opening polymerizations (A-ROP) of appropriate mixtures of cyclic siloxanes initiated by oligomeric, difunctional tetramethylammonium silanolate in the presence of a difunctional tetramethyldivinyldisiloxane end-blocker and molecular weight regulator. Two series of these terpolymers were prepared: one containing 5 mol % MeTfpS repeat units but varying degrees of polymerization (DP) from 80 to 600 and the other containing 5, 10, and 15 mol % MeTfpS at a constant DP of 600. All polymers contained mostly random distributions of MeTfpS repeat units. The pastes were prepared by speed-mixing, ready for use in DIW, they exhibited ideal thixotropy, long-term (over a year) rheological stability, and can be quickly (within seconds) and permanently cured by room-temperature, UV-activated hydrosilylation in air. The resulting elastomers showed base polymer molecular weight- and composition-dependent stress-induced crystallization (SIC) at higher molecular weights and lower trifluoropropyl contents and tunable Shore A hardness (30A–40A) typical for soft polysiloxane rubbers. Preliminary DIW tests indicated excellent printability with high precision of printed shapes and clearly present these one-component pastes as prime candidates for simple and practical printing of silicone elastomer objects.
Plant-based materials have the potential to replace some petroleum-based products, offering compostability and biodegradability as critical advantages. Xylan-rich biomass sources are gaining recognition due to their abundance and underutilization in current industrial applications. Research of potential xylan applications has been complicated by the complex and heterogeneous structure that varies for different xylan feedstocks. Acylation is a broadly used reaction in functionalization of polysaccharides at an industrial scale. However, the efficiency of this reaction varies with the xylan source. To optimize xylan valorization, a systematic understanding of structure–reactivity relationships is essential. This study explores, characterizes, and compares various xylan feedstocks in the acylation process. Xylan feedstocks were analyzed for their chemical composition, degree of polymerization, branching, solubility, and presence of impurities. These features were correlated with xylan glycotypes’ reactivity toward functionalization with succinic anhydride in an optimized DMSO/KOH condition, achieving carboxyl contents of up to 1.46. We used principal component analysis and hierarchical clustering to identify key structural features of xylan that promote its reactivity. Our findings reveal that xylans with higher xylose content and lower degrees of branching exhibit enhanced reactivity, achieving higher carboxyl content and yields. Structural analyses confirmed successful modification, and light scattering analyses showed dramatic changes in the solution properties. Succinylation improves the solubility and film-forming properties of native xylans. This study shows key structure–reactivity relationships in xylan succinylation, establishing that low branching, high xylose content, and reduced lignin impurity enhance chemical functionalization. The results offer a framework for selecting optimal biomass feedstocks and support future efforts in genetic and synthetic biology to design plants with tunable xylan architectures. These findings advance the hemicellulose valorization for applications in coatings and packaging.
Random heteropolymers (RHPs) have been computationally designed and experimentally shown to recapitulate protein-like phase behavior and function. However, unlike proteins, RHP sequences are only statistically defined and cannot be sequenced. Recent developments in reversible-deactivation radical polymerization allowed simulated polymer sequences based on the well-established Mayo–Lewis equation to more accurately reflect ground-truth sequences that are experimentally synthesized. This led to opportunities to perform bioinformatics-inspired analysis on simulated sequences to guide the design, synthesis, and interpretation of RHPs. We compared batches on the order of 10000 simulated RHP sequences that vary by synthetically controllable and measurable RHP characteristics such as chemical heterogeneity and average degree of polymerization. Our analysis spans across 3 levels: segments along a single chain, sequences within a batch, and batch-averaged statistics. We discuss simulator fidelity and highlight the importance of robust segment definition. Examples are presented that demonstrate the use of simulated sequence analysis for in-silico iterative design to mimic protein hydrophobic/hydrophilic segment distributions in RHPs and compare RHP and protein sequence segments to explain experimental results of RHPs that mimic protein function. To facilitate the community use of this workflow, the simulator and analysis modules have been made available through an open source toolkit, the RHPapp.
5-hydroxymethylfurfural (HMF) production from cellulose is a hot topic, while the rigidity of cellulose limits its efficient conversion into HMF. Cellulose formate has exhibited the great potential for HMF production but it’s synthesis via direct formylation of cellulose in formic acid is difficult. We reported a green synthetic route of cellulose formate and its efficient conversion into HMF. Ball milled cellulose formate (BCF) was synthesized via ball milling followed by formylation in formic acid at 80 °C for 0.5 h. The structure of BCF was thoroughly characterized and BCF was subsequently converted to HMF catalyzed by AlCl3 and HCl in dimethyl sulfoxide (DMSO)-H 2 O media. Results showed that ball milling of cellulose for 1–1.5 h efficiently deconstructed its crystallinity and degree of polymerization, boosting its further formylation and catalytic conversion. An overall 66.9% HMF yield from cellulose was achieved at 150 °C for 20 min using BCF derived from cellulose ball milled for 1.5 h as the substrate. BCF exhibits high reactivity toward HMF due to its excellent solubility and accessibility in DMSO-H 2 O media, and the release of formic acid in reaction further facilitates HMF production. BCF synthesized with different ball milling times shows different degrees of substitution of formyl groups, which could serve as an indicator and regulate the HMF production. The green synthesis of cellulose formate creates an efficient pathway for HMF production.
It is commonly assumed that template-directed polymerizations have played a key role in prebiotic evolution. A computer simulation that models up to 33 competing reactions was used to investigate the product distribution in a template-directed oligonucleotide synthesis as a function of time and concentration of the reactants. The study focuses on the poly(C)-directed elongation reaction of oligoguanylates, and how it is affected by the competing processes of hydrolysis and dimerization of the activated monomer, which have the potential of severely curtailing the elongation and reducing the size and yield of the synthesized polymers. The simulations show that realistic and probably prebiotically plausible conditions can be found where hydrolysis and dimerization are either negligible or where a high degree of polymerization can be attained even in the face of substantial hydrolysis and/or dimerization.
Suzuki catalyst transfer polymerization (SCTP) has emerged as an effective method for accessing length-controlled π-conjugated poly(p-phenylene). Regio-controlled functional group sequencing along the backbone and the chain ends of synthetic polymers remains a challenge for the successful integration of organic semiconductors in sensors and electronic devices. Here, we report a bidirectional SCTP system based on dinuclear palladium(II) initiators. Functional groups transferred during the initiation and termination steps unlock independently addressable synthetic handles at the polymer core and respective chain ends. These functional groups open opportunities for late-stage regio-controlled and chemoselective derivatizations. Control over key polymer parameters, including molecular weight (M n ), dispersity ( Đ = M w /M n ), degree of polymerization ( DP ), termination efficiency, and functional group interconversion, is corroborated by size exclusion chromatography (SEC) and NMR spectroscopy. The modular design of SCTP initiators, in combination with commercially available terminating groups, represents a highly flexible toolbox for late-stage polymer conjugation, e.g., chemoselective anchoring groups for integration with functional electronics or bioorthogonal conjugation for molecular sensing.
Bottlebrush polymers are a unique class of macromolecular architectures with a plethora of potential industrial and pharmaceutical applications that critically depend on the bottlebrush shape and dimensions. Here, a systematic series of 12 cylindrical and 12 cone-shaped (tapered) bottlebrush polymers with poly(tert-butyl acrylate) (PtBA) or polystyrene (PS) side chains were synthesized using the sequential addition of macromonomers ring-opening metathesis polymerization (SAM-ROMP) grafting-through method. Small-angle neutron scattering (SANS) studies on dilute solutions of the two types of bottlebrush polymers provided noninvasive characterization of their structural dimensions and chain conformations. Simulated SANS traces, generated using coarse-grained molecular dynamics simulations, reproduced the distinctive features observed in the experimental SANS signals and provided necessary validation for data modeling. The combined analysis of experimental and simulated SANS signals yielded key structural and conformational parameters, including the bottlebrush radius, length, and Kuhn length as well as the excluded volume parameter and the correlation length of the polymer side chains. Importantly, the obtained structural parameters followed well-defined scaling laws as a function of the backbone and side chain degrees of polymerization, as predicted by mean field theories. In conclusion, these findings provide clear experimental and computational evidence of the interdependence of structural and conformational properties in an important class of polymer architectures.