Search NASA⌕ Search

SEARCH · Search NASA

Results for “Density Functional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Covalency of Trivalent Actinide Ions with Different Donor Ligands: Do Density Functional and Multiconfigurational Wavefunction Calculations Corroborate the Observed “Breaks”?

A comprehensive ab initio study of periodic actinide–ligand bonding trends for trivalent actinides is performed. Relativistic density functional theory (DFT) and complete active-space (CAS) self-consistent field wavefunction calculations are used to dissect the chemical bonding in the [AnCl 6 ] 3– , [An(CN) 6 ] 3– , [An(NCS) 6 ] 3– , [An(S 2 PMe 2 ) 3 ], [An(DPA) 3 ] 3– , and [An(HOPO)] – series of actinide (An = U–Es) complexes. Except for some differences for the early actinide complexes with DPA, bond orders and excess 5f-shell populations from donation bonding show qualitatively similar trends in 5f n active-space CAS vs DFT calculations. The influence of spin–orbit coupling on donation bonding is small for the tested systems. Along the actinide series, chemically soft vs chemically harder ligands exhibit clear differences in bonding trends. There are pronounced changes in the 5f populations when moving from Pu to Am or Cm, which correlate with previously noted “breaks” in chemical trends. As a result, bonding involving 5f becomes very weak beyond Cm/Bk. We propose that Cm(III) is a borderline case among the trivalent actinides that can be meaningfully considered to be involved in ground-state 5f covalent bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Natural Charge-Transfer Analysis: Eliminating Spurious Charge-Transfer States in Time-Dependent Density Functional Theory via Diabatization, with Application to Projection-Based Embedding

For many types of vertical excitation energies, linear-response time-dependent density functional theory (LR-TDDFT) offers a useful degree of accuracy combined with unrivaled computational efficiency, although charge-transfer excitation energies are often systematically and dramatically underestimated, especially for large systems and those that contain explicit solvent. As a result, low energy electronic spectra of solution-phase chromophores often contain tens to hundreds of spurious charge-transfer states, making LR-TDDFT needlessly expensive in bulk solution. More nefariously, intensity borrowing by the low-energy charge-transfer states can affect intensities of the valence excitations even if those excitation energies are accurate. At higher excitation energies, it is difficult to distinguish spurious CT states from genuine charge-transfer-to-solvent (CTTS) excitations. In this work, we introduce an automated diabatization scheme that enables fast and effective screening of the CTTS acceptor space in bulk solution. Our procedure introduces the concept of “natural charge-transfer orbitals”, which provide a means to isolate characteristic pairs of orbitals that are most likely to participate in a CTTS excitation. The projection of these orbitals onto solvent-centered virtual orbitals provides a criterion for defining the most important solvent molecules in a given excitation. We apply this method to analyze an ab initio molecular dynamics (MD) trajectory of I-(aq) and report the lowest-energy CTTS band in the absorption spectrum. Our results are in excellent agreement with experimental measurements for bulk I-(aq), and only one-third of the water molecules in the I-(H2O)96 simulation cell need to be described with LR-TDDFT in order to obtain excitation energies that are converged to < 0.1 eV. The tools introduced herein will improve the accuracy, efficiency, and usability of LR-TDDFT in solution-phase environments

Carter-Fenk, Kevin D.↗
DOE OSTI2022

Ab-Initio Investigation of Finite Size Effects in Rutile Titania Nanoparticles with Semilocal and Nonlocal Density Functionals

In this work, we employ hybrid and generalized gradient approximation (GGA) level density functional theory (DFT) calculations to investigate the convergence of surface properties and electronic gap of rutile titania nanoparticles with particle size. The surface energies and electronic gaps are calculated for cuboidal particles with minimum dimension ranging from 3.7 Angstrom (24 atoms) to 10.3 Angstrom (384 atoms) using a highly-parallel real-space DFT code to enable hybrid level DFT calculations of larger nanoparticles than are typically practical. We deconvolute the geometric and electronic finite size effects in surface energy, and evaluate the influence of defects on electronic gap and density of states (DOS). The electronic finite size effects in surface energy vanish when the minimum length scale of the nanoparticles becomes greater than 10 Angstrom. We show that this length scale is consistent with a computationally efficient numerical analysis of the characteristic length scale of electronic interactions. The surface energy of nanoparticles having minimum dimension beyond this characteristic length can be approximated using slab calculations that account for the geometric defects. In contrast, the finite size effects on the electronic gap and DOS is highly dependent on the shape and size of these particles. Furthermore, the DOS for cuboidal particles and more realistic particles constructed using the Wulff algorithm reveal that defect states within the electronic gap play a key role in determining the eigen value distribution of nanoparticles and the electronic gap does not converge to the bulk limit for the particle sizes investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Adsorption Properties of Au−Ni Surface Alloys with a Nonstoichiometric Moiré Structure: A Density Functional Theory Study

Due to the large lattice mismatch between gold and nickel, gold–nickel surface alloys can form unique nonstoichiometric overlayer structures characterized by a moiré pattern and subsurface defects. For this work, we performed density functional theory (DFT) calculations to study the adsorption of molecular oxygen, atomic hydrogen, and atomic carbon on a gold–nickel(111) surface alloy with 0.46 monolayer gold randomly distributed in the surface layer. We observed six distinct adsorption structures for molecular oxygen characterized by intramolecular stretching frequencies of <700, 729, 795, 857, 929, and 1004 cm –1 , which describe well the experimentally observed high-resolution electron energy-loss spectra. Surface atomic hydrogen adsorption is associated with adsorbate–surface modes in the ∼1000 cm –1 range, while subsurface hydrogen can have features as low as ∼400 cm –1 . We observed a unique adsorption structure for atomic carbon inside the surface dislocation loop defect, which explains the experimentally observed low carbon-surface mode at ∼340 cm –1 . Our study sheds light on the unique adsorption properties of the gold–nickel surface alloys and helps with rationalizing vibrational frequency experimental studies for this system.

adsorption↗
DOE OSTI2024

Tunable noninteracting free-energy density functionals for high-energy-density physics applications

In this work, we introduce the concept of a tunable noninteracting free-energy density functional and present two examples realized: (i) via a simple one-parameter convex combination of two existing functionals and (ii) via the construction of a generalized gradient approximation (GGA) enhancement factor that contains one free parameter and is designed to satisfy a set of incorporated constraints. Functional (i), constructed as a combination of the local Thomas–Fermi and a pseudopotential-adapted GGA for the noninteracting free-energy, has already demonstrated its practical usability for establishing the high temperature end of the equation of state of deuterium [Phys. Rev. B 104, 144104 (2021)] and CHON resin [Phys. Rev. E 106, 045207 (2022)] for inertial confinement fusion applications. Hugoniot calculations for liquid deuterium are given as another example of how the application of computationally efficient orbital-free density functional theory (OF-DFT) can be utilized with the employment of the developed functionals. Once the functionals have been tuned such that the OF-DFT Hugoniot calculation matches the Kohn–Sham solution at some low-temperature point, agreement with the reference Kohn–Sham results for the rest of the high temperature Hugoniot path is very good with relative errors for compression and pressure on the order of 2% or less.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Examination of How Well Long-Range-Corrected Density Functionals Satisfy the Ionization Energy Theorem

For this work, we calculated the vertical ionization energies (VIE) of 99 species in two ways to examine the accuracy of several long-range-corrected (LC) hybrid meta functionals in comparison with a gradient approximation (GA), global hybrids, and doubly hybrids. In the category of LC functionals, we examined both those with meta ingredients (i.e., that depend on the kinetic energy density) and those without them. The LC-hybrid meta functionals examined are M11, revM11, M11plus, and ωB97M-V. The reference data used to assess accuracy consist of 95 molecules and 4 atoms in the GW100 set. The two methods studied are the ΔSCF method (involving the difference of neutral and cation self-consistent field (SCF) energies) and the ionization energy theorem (involving the orbital energy of the highest occupied molecular orbital, HOMO). We calculated linear correlation coefficients (r 2 ) and mean absolute deviations (MADs) between each approach and the reference VIE value from the CCSD(T)/def2-TZVPP level of theory. We compared the new LC-hybrid meta calculations to calculations with the 10 functionals in a previous VIE study by Brémond et al. and to the calculations with LC-BLYP (LC-Becke, Lee–Yang–Parr), CAM-B3LYP (Coulomb-attenuating-method Becke-3-parameter Lee–Yang–Parr), LC-ωHPBE, and ωB97X-D. The results show that Minnesota LC-hybrid meta functionals have the smallest mean absolute deviation of ionization energy theorem VIEs with the reference data; the LC-ωHPBE functional also does quite well in this test. This is very encouraging and indicates that LC-hybrid meta functionals would be the best starting points for the tuning strategy that has been shown to be a very good procedure for improving time-dependent density functional calculations, and it also helps explain the good success of LC-hybrid meta functionals for molecular excitation energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Discovery of Stable Surfaces with Extreme Work Functions by High‐Throughput Density Functional Theory and Machine Learning

Abstract The work function is the key surface property that determines the energy required to extract an electron from the surface of a material. This property is crucial for thermionic energy conversion, band alignment in heterostructures, and electron emission devices. This work presents a high‐throughput workflow using density functional theory (DFT) to calculate the work function and cleavage energy of 33,631 slabs (58,332 work functions) that are created from 3,716 bulk materials. The number of calculated surface properties surpasses the previously largest database by a factor of ≈27. Several surfaces with an ultra‐low (<2 eV) and ultra‐high (>7 eV) work function are identified. Specifically, the (100)‐Ba‐O surface of BaMoO 3 and the (001)‐F surface of Ag 2 F have record‐low (1.25 eV) and record‐high (9.06 eV) steady‐state work functions. Based on this database a physics‐based approach to featurize surfaces is utilized to predict the work function. The random forest model achieves a test mean absolute error (MAE) of 0.09 eV, comparable to the accuracy of DFT. This surrogate model enables rapid predictions of the work function (≈ 10 5 faster than DFT) across a vast chemical space and facilitates the discovery of material surfaces with extreme work functions for energy conversion and electronic device applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Simple hydrogenic estimates for the exchange and correlation energies of atoms and atomic ions, with implications for density functional theory

Exact density functionals for the exchange and correlation energies are approximated in practical calculations for the ground-state electronic structure of a many-electron system. An important exact constraint for the construction of approximations is to recover the correct non-relativistic large-Z expansions for the corresponding energies of neutral atoms with atomic number Z and electron number N = Z, which are correct to leading order (–0.221 Z 5/3 and –0.021 Z ln Z respectively) even in the lowest-rung or local density approximation. We find that hydrogenic densities lead to E x (N,Z) ≈ –0.354 N 2/3 Z (as known before only for Z >> N >> 1) and E c ≈ –0.02 N ln N . These asymptotic estimates are most correct for atomic ions with large N and Z >> N, but we find that they are qualitatively and semi- quantitatively correct even for small N and for N ≈ Z. The large-N asymptotic behavior of the energy is pre-figured in small-N atoms and atomic ions, supporting the argument that widely-predictive approximate density functionals should be designed to recover the correct asymptotics. Here, it is shown that the exact Kohn-Sham correlation energy, when calculated from the pure ground-state wavefunction, should have no contribution proportional to Z in the Z → ∞ limit for any fixed N.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Density Functional Theory Study of the Adsorption and Dissociation of Copper(I) Acetamidinates on Ni(110): The Effect of the Substrate

In order to assess the role of a metal substrates on the thermal chemistry of adsorbed acetamidinate metalorganic compounds, we have studied the surface chemistry of copper(I)–N,N'-dimethylacetamidinate on Ni(110) using density functional theory and contrasted it with similar calculations we previously carried out on Cu(110). At low coverages, it was found that, in its most stable configuration, the molecular adsorption of copper(I)–N,N'-dimethylacetamidinate dimers occurs with the Cu atoms occupying surface hollow sites. In this work, the ligands reorient away from those metal centers, and the N atoms develop new direct bonds with surface Ni atoms. However, this configuration is not stable and decomposes by losing both ligands to the surface. In the final state, the two ligands bind via their N atoms to Ni sites one lattice space away from the sites where the Cu atoms remain, with their molecular planes perpendicular to that of the surface. This is in contrast with what happens in the case of adsorption on Cu(110), where the Cu atoms from the metalorganic complex still occupy hollow sites but where only one of the ligands breaks away and binds directly to the surface; the other remains on top of the two Cu ions. In terms of the energetics of adsorption and decomposition, the reactions on Ni(110) are much more exothermic than on Cu(110). Further analysis of the distribution of charge within the adsorbates shows a minor reduction of the Cu atoms of the dimer upon interaction with the surface; full reduction to metallic copper is complete only when both ligands have fully migrated to their new Ni surface sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Self‐Consistent Convolutional Density Functional Approximations: Application to Adsorption at Metal Surfaces

The exchange-correlation (XC) functional in density functional theory is used to approximate multi-electron interactions. A plethora of different functionals are available, but nearly all are based on the hierarchy of inputs commonly referred to as “Jacob's ladder.” This paper introduces an approach to construct XC functionals with inputs from convolutions of arbitrary kernels with the electron density, providing a route to move beyond Jacob's ladder. We derive the variational derivative of these functionals, showing consistency with the generalized gradient approximation (GGA), and provide equations for variational derivatives based on multipole features from convolutional kernels. A proof-of-concept functional, PBEq, which generalizes the PBEα framework with mathematical equation being a spatially-resolved function of the monopole of the electron density, is presented and implemented. It allows a single functional to use different GGAs at different spatial points in a system, while obeying PBE constraints. Analysis of the results underlines the importance of error cancellation and the XC potential in data-driven functional design. After testing on small molecules, bulk metals, and surface catalysts, the results indicate that this approach is a promising route to simultaneously optimize multiple properties of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Substituted ALPO-5 Zeolites as Promising O 2 Sorption Pump Materials: A Density Functional Theory Study

Many chemical processes depend on having an environment that is low in oxygen partial pressure (P O2 < 100 Pa); sorption pumps are a promising route to establishing that environment by either oxygen pumping or oxygen separation from an inert gas. Near ambient sorption-based processes rely on either pressure or thermal swings, requiring no moving parts, no electricity, and neither very high nor very low temperatures. In this work, we use ab initio calculations to explore zeolites as a class of materials for sorption based oxygen pumping/separation. Our calculations indicate that while the neat ALPO-5 zeolite does not adsorb O 2 , O 2 does adsorb on zeolites selectively substituted with transition metals and metalloids and hence, can enable separation and pumping. ALPO-5 substituted with Si, Ge, Sn, Pd, Pt, Ti, V, Cr, Mn, Zr, Mo, Hf, W, Ce, and Pr provides adsorption energies ranging from -0.19 to -3.92 eV, (-) indicates exothermic process. Additionally, we provide a comprehensive understanding of what controls the adsorption energy: 1) the substi-tutions must be able to adopt an oxidation state that is more positive than the cation it replaces, and 2) the size of the pore into which the O 2 adsorbs to the wall. Additionally, we conduct a ther-modynamic analysis of a thermal swing cycle to approximate the optimal O 2 binding energy for 2 low energy O 2 pumping/separation. We find that the minimum energy cost likely occurs when the adsorption energy is in the range of 0.75 – 1.00 eV (72 – 97 kJ·mol -1 ), which corresponds to Ge, V, Pt, or Ce substituted ALPO-5.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Shock-induced metallization of polystyrene along the principal Hugoniot investigated by advanced thermal density functionals

To date, none of the ab-initio molecular dynamics simulations of polystyrene, often used as an ablator material in inertial confinement fusion targets, with the standard ground-state exchange-correlation (XC) functional in density-functional theory can satisfactorily agree with experiments in terms of reflectivity measurements. Here, we use recently developed thermal strongly constrained and appropriately normed Laplacian dependent meta-generalized gradient approximation XC density functional (T-SCAN-L) and thermal hybrid XC density functional (KDT0) to show that the inclusion of thermal and inhomogeneity effects is crucial for accurate prediction of structural evolution and corresponding insulator-metal transition (IMT) during shock compression. Optical reflectivity calculated as an indicator of IMT is in perfect accord with experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Fully thermal meta-GGA exchange correlation free-energy density functional

The application of density functional theory to materials in the warm dense matter regime has motivated the development of exchange-correlation functionals which incorporate proper, explicit temperature dependence. Previous work has yielded fully-thermal exchange-correlation free energy functionals at the local density approximation (LDA) and generalized gradient approximation (GGA) levels of refinement. Recently an additive thermal correction scheme was utilized to construct a meta-GGA exchange-correlation (XC) functional in which thermal effects are treated at the GGA level. Here, the f TSCAN free-energy XC functional presented here includes thermal effects through the meta-GGA level in the context of the SCAN (strongly constrained and appropriately normed) ground-state functional. The f TSCAN functional provides generality while achieving similar performance to a thermal GGA functional at high temperatures, e.g. pressures within 1% of path integral Monte Carlo simulations of warm dense hydrogen, and a significant improvement over ground-state functionals. At low temperatures, f TSCAN demonstrates improvements in accuracy relative to lower-level and deorbitalized functionals, indicating that calculations using f TSCAN may be expected to perform well across experimentally relevant densities and pressures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Spin Splitting Energy of Transition Metals: A New, More Affordable Wave Function Benchmark Method and Its Use to Test Density Functional Theory

Accurately predicting the spin splitting energy of chemical species is important for understanding their reactivity and magnetic properties, but it is very challenging, especially for molecules containing transition metals. One impediment to progress is the scarcity of accurate benchmark data. Here we report a set of calculations designed to yield reliable benchmarks for simple transition-metal complexes that can be used to test density functional methods that are affordable for large systems of more practical interest. Various wave function methods are tested against experiment for Fe 2+ , Fe 3+ , and Co 3+ , including CASSCF, CASPT2, CASPT3, MRCISD, MRCISD+Q, ACPF, AQCC, CCSD(T), and CASPT2/CCSD(T) and also a new method called CASPT2.5, which is performed by taking the average of the CASPT2 and CASPT3 energies. Furthermore, we find that MRCISD+Q, ACPF, and AQCC require smaller active spaces for good accuracy than are required by CASPT2 and CASPT3, and this aspect may be important for calculations on larger molecules; here we find that CASPT2.5 extrapolated to a complete basis set is the most suitable method—in terms of computational cost and in terms of accuracy on monatomic systems—and therefore we chose this method for molecular benchmarks. Then Kohn–Sham density functional calculations with 60 exchange-correlation functionals are tested for FeF 2 , FeCl 2 , and CoF 2 . We find that MN15-L, M06-SX, and revM06 have very good agreement with CASPT2.5 benchmarks in terms of both the spin splitting energy and the optimized geometry for each spin state. In addition, we recommend def2-TZVP as the most suitable basis set to perform density functional calculations for molecular spin splitting energies; extra polarization functions in the basis set do not help to increase the accuracy of the spin splitting energy in KS calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Renormalized site density functional theory

Site density functional theory (SDFT) provides a rigorous framework for statistical mechanics analysis of inhomogeneous molecular liquids. The key defining feature of these systems is the presence of two very distinct interactions scales (intra- and inter-molecular), and as such proper description of both effects is critical to the accuracy of the calculations. Current SDFT applications utilize the same approximation scheme for both interaction motifs, which negatively impacts the results. Dual space methodology, used in this work, alleviates this issue by providing the flexibility of evaluating part of the interactions in traditional field representation. For molecular liquid this translates into retaining density representation for inter-molecular interactions but describing stiff intra-molecular remainder by more appropriate conventional field based methods. This opens the way to decouple analysis of the two interactions scales - the idea which is developed further in this work for the case of homogeneous reference approximation of inter-molecular interactions. We demonstrate that by defining new collective variables, the behavior of the original molecular liquid system at the inter-molecular level can be transformed to resemble that of an effective simple fluid mixture. The latter is linked to intra-molecular scale through renormalized interaction parameters. We illustrate this renormalization procedure for several types of diatomic liquids, showing that this approach cures many of the shortcomings of existing SDFT methods.

Chuev, Gennady N.↗