Search NASA⌕ Search

SEARCH · Search NASA

Results for “Differentiable predictive control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Preliminary Development of Heat Transfer Model-Based Control Algorithms of Liquid Sodium Purification System: Advanced Sensors and Instrumentation Advanced Controls

Monitoring the operation of sodium purification system is essential for efficient operation of sodium fast reactors. In this work, a heat transfer model has been developed for monitoring the plugging meter and cold trap systems at the Mechanisms Engineering Test Loop (METL) liquid sodium facility at Argonne National Laboratory. The model of the purification system was developed by treating the respective aspects of the cold trap purification loop and plugging meter diagnostic loop as two separate control volumes using information from the METL piping and instrumentation diagram (P&ID). A model predictive controller was designed using first order differential equations with the specified boundary conditions. The system behavior was studied with a tuned optimized procedure using the internal cold trap temperature and plugging meter outlet temperature as control variables, and the air blower temperature as an independent variable respectively. Results of computer simulations obtained in this study compared favorably with experimental data showing very good reference tracking response with negligible overshoot as both plugging meter and cold trap physical models approach the setpoint.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Adaptive Control of a Transport Aircraft Using Differential Thrust

The paper presents an adaptive control technique for a damaged large transport aircraft subject to unknown atmospheric disturbances such as wind gust or turbulence. It is assumed that the damage results in vertical tail loss with no rudder authority, which is replaced with a differential thrust input. The proposed technique uses the adaptive prediction based control design in conjunction with the time scale separation principle, based on the singular perturbation theory. The application of later is necessitated by the fact that the engine response to a throttle command is substantially slow that the angular rate dynamics of the aircraft. It is shown that this control technique guarantees the stability of the closed-loop system and the tracking of a given reference model. The simulation example shows the benefits of the approach.

Stepanyan, Vahram↗

Multi-mode evaluation of power-maximizing cross-flow turbine controllers

A general method for predicting and evaluating the performance of three candidate cross-flow turbine power-maximizing controllers is presented in this paper using low-order dynamic simulation, scaled laboratory experiments, and full-scale field testing. For each testing mode and candidate controller, performance metrics quantifying energy capture (ability of a controller to maximize power), variation in torque and rotation rate (related to drive train fatigue), and variation in thrust loads (related to structural fatigue) are quantified for two purposes. First, for metrics that could be evaluated across all testing modes, we considered the accuracy with which simulation or laboratory experiments could predict performance at full scale. Second, we explored the utility of these metrics to contrast candidate controller performance. For these turbines and set of candidate controllers, energy capture was found to only differentiate controller performance in simulation, while the other explored metrics were able to predict performance of the full-scale turbine in the field with various degrees of success. Finally, effects of scale between laboratory and full-scale testing are considered, along with recommendations for future improvements to dynamic simulations and controller evaluation.

13 HYDRO ENERGY↗

NSLS-II Control of Dynamic Aperture

We have outlined how, by an intuitive approach, the on- and off-momentum dynamic aperture for a synchrotron light source can be estimated from a nonlinear system of algebraic equations for the sextupole/multipole strengths. The approach has only two free parameters: the relative weight for resonance vs. tune shift terms and the tune footprint for stable trajectories in a modern third generation synchrotron light source. In other words, we have established a control theory approach for the medium term (10{sup 3} turns) stability for a dynamic system described by a nonlinear system of ordinary differential equations. Equipped with a predictive, quantitative model for stability, we have then evaluated how to improve the control of the dynamics by analyzing and modifying the properties of the corresponding algebraic system. In particular, by changing the number- and characteristics of the parameters, i.e., we have not evaluated how the underlying (linear) optics could be improved. We have also validated our conjectures by numerical simulations with a realistic model. Presumably, our conclusions, summarized in Section 1.0, are a direct result of the presented analysis and observations.

43 PARTICLE ACCELERATORS↗

Identification and characterization of circular RNAs in rapid atrial pacing dog atrial tissue

Highlights: • Revealed the expression characterization of circRNAs in dog atrial tissue. • Compared differentially expressed circRNAs between atrial fibrillation and control dog. • Found extensive interaction among circRNAs and AF related miRNAs and mRNAs. Circular RNAs (circRNAs) have emerged as novel molecules of interest in gene regulation as other noncoding RNAs, and participating in the process of many diseases. However, the expression and functions of circRNAs in Rapid atrial pacing (RAP) dog atrial tissue still unknown. 12 canines were randomly assigned to control and pacing group. RAP at 500 beats per minute was maintained 14 days in the pacing group. The expression characterization of circRNAs were revealed by high-throughput sequencing. We totally predicted 15,990 circRNAs in dog atrial tissues. Moreover, we found 146 differentially expressed circRNAs between control and RAP dogs. Five circRNAs were selected for subsequent RT-PCR validation, and four circRNAs confirmed with the high throughput sequencing analysis. GO analysis showed that the differentially expressed circRNAs might involve in the process of “structural constituent of cytoskeleton, ion channel activity”. We explored the circRNA-miRNA interaction network, and found extensive interaction among differentially expressed circRNAs and AF related miRNAs and mRNAs. Our work firstly identified the characterization of circRNAs in the dog atrial, and revealed the differentially expressed circRNAs in the RAP dog, this might lay a solid foundation on the function of circRNA in the mechanisms of AF.

60 APPLIED LIFE SCIENCES↗

Phosphoproteomics Modifications in Women with Rheumatoid Arthritis─Application of Web-Based Software to Enhance Data Visualization

Individuals with rheumatoid arthritis (RA) are at increased risk of functional disability, cardiovascular disease, and obesity, all of which are influenced by dysregulated skeletal muscle. Here, this pilot study aims to identify phosphoproteomics changes in RA skeletal muscle and visualize modifications through development of a web-based app designed to promote user-friendly data interpretation and visualization. NanoLC–MS/MS analysis was performed on vastus lateralis biopsies from three women with RA and matched healthy controls. Differential analysis was performed using the Limma R package. Kinase substrate enrichment analysis (KSEA) predicted changes in kinase activity. RA muscle displayed 35 upregulated and 60 downregulated phosphosites, including the cytoskeletal proteins TTN (Ser33201, Ser33013, Ser20925), NEB (Ser2219, Thr254, Ser33013, Ser20925), FLNA (Ser1459), and LASP1 (Ser146). Compared to healthy controls, KSEA predicted decreased activity of several kinases in RA muscle, including PRKACA and CDKs. All such changes were visualized by use of our web-based app. Overall, phosphoproteome analysis reveals signaling alterations in RA skeletal muscle linked to cytoskeletal proteins, representing candidate disease biomarkers; these modifications can be explored through use of our web-based software.

phosphoproteomics↗

Control theory for random systems

A survey is presented of the current knowledge available for designing and predicting the effectiveness of controllers for dynamic systems which can be modeled by ordinary differential equations. A short discussion of feedback control is followed by a description of deterministic controller design and the concept of system state. The need for more realistic disturbance models led to the use of stochastic process concepts, in particular the Gauss-Markov process. A compensator controlled system, with random forcing functions, random errors in the measurements, and random initial conditions, is treated as constituting a Gauss-Markov random process; hence the mean-square behavior of the controlled system is readily predicted. As an example, a compensator is designed for a helicopter to maintain it in hover in a gusty wind over a point on the ground.

Bryson, A. E., Jr.↗

COBRA-DDP: Trajectory Generation and Collision Avoidance Augmentations for eVTOL Vehicles

This paper presents a receding horizon model predictive control variation of the combined Bernstein polynomial optimal reciprocal collision avoidance (ORCA) differential dynamic programming (COBRA-DDP) algorithm for AAM vehicles. Collision avoidance in combination with effective trajectory replanning are expected to be core components of AAM vehicles operating within a crowded airspace. This environment necessitates the use of real-time trajectory planning algorithms that are capable of planning around large amounts of stationary and moving obstacles. Previous work on COBRA-DDP demonstrated the capability of the algorithm to produce dynamically feasible trajectories for AAM vehicles and general collision avoidance. This paper improves upon the previous work by increasing the number of stationary and moving obstacles, implementing a variation of COBRA-DDP that lends itself to real-time application. These advancements are demonstrated on a vertical takeoff and landing (VTOL) vehicle simulation with highly nonlinear vehicle dynamics.

COBRA-DDP↗

COBRA-DDP: Trajectory Generation and Collision Avoidance Augmentations for eVTOL Vehicles

This paper presents a receding horizon model predictive control variation of the combined Bernstein polynomial optimal reciprocal collision avoidance (ORCA) differential dynamic programming (COBRA-DDP) algorithm for AAM vehicles. Collision avoidance in combination with effective trajectory replanning are expected to be core components of AAM vehicles operating within a crowded airspace. This environment necessitates the use of real-time trajectory planning algorithms that are capable of planning around large amounts of stationary and moving obstacles. Previous work on COBRA-DDP demonstrated the capability of the algorithm to produce dynamically feasible trajectories for AAM vehicles and general collision avoidance. This paper improves upon the previous work by increasing the number of stationary and moving obstacles, implementing a variation of COBRA-DDP that lends itself to real-time application. These advancements are demonstrated on a vertical takeoff and landing (VTOL) vehicle simulation with highly nonlinear vehicle dynamics.

COBRA-DDP↗

Differentiable multiphase flow model for physics-informed machine learning in reservoir pressure management

Accurate subsurface reservoir pressure control is extremely challenging due to geological heterogeneity and multiphase fluid-flow dynamics. Predicting behavior in this setting relies on high-fidelity physics-based simulations that are computationally expensive. Yet, the uncertain, heterogeneous properties that control these flows make it necessary to perform many of these expensive simulations, which is often prohibitive. To address these challenges, we introduce a physics-informed machine learning workflow that couples a fully differentiable multiphase flow simulator, which is implemented in the DPFEHM framework with a convolutional neural network (CNN). The CNN learns to predict fluid extraction rates from heterogeneous permeability fields to enforce pressure limits at critical reservoir locations. By incorporating transient multiphase flow physics into the training process, our method enables more practical and accurate predictions for realistic injection-extraction scenarios compared to previous works. To speed up training, we pretrain the model on single-phase, steady-state simulations and then finetune it on full multiphase scenarios, which dramatically reduces the computational cost. We demonstrate that high-accuracy training can be achieved with fewer than three thousand full-physics multiphase flow simulations – compared to previous estimates requiring up to ten million. This drastic reduction in the number of simulations is achieved by leveraging transfer learning from much less expensive single phase simulations.

25 ENERGY STORAGE↗

Model Predictive Optimal Control of a Time-Delay Distributed-Parameter Systems

This paper presents an optimal control method for a class of distributed-parameter systems governed by first order, quasilinear hyperbolic partial differential equations that arise in many physical systems. Such systems are characterized by time delays since information is transported from one state to another by wave propagation. A general closed-loop hyperbolic transport model is controlled by a boundary control embedded in a periodic boundary condition. The boundary control is subject to a nonlinear differential equation constraint that models actuator dynamics of the system. The hyperbolic equation is thus coupled with the ordinary differential equation via the boundary condition. Optimality of this coupled system is investigated using variational principles to seek an adjoint formulation of the optimal control problem. The results are then applied to implement a model predictive control design for a wind tunnel to eliminate a transport delay effect that causes a poor Mach number regulation.

Nguyen, Nhan↗

Adjoint Method and Predictive Control for 1-D Flow in NASA Ames 11-Foot Transonic Wind Tunnel

This paper describes a modeling method and a new optimal control approach to investigate a Mach number control problem for the NASA Ames 11-Foot Transonic Wind Tunnel. The flow in the wind tunnel is modeled by the 1-D unsteady Euler equations whose boundary conditions prescribe a controlling action by a compressor. The boundary control inputs to the compressor are in turn controlled by a drive motor system and an inlet guide vane system whose dynamics are modeled by ordinary differential equations. The resulting Euler equations are thus coupled to the ordinary differential equations via the boundary conditions. Optimality conditions are established by an adjoint method and are used to develop a model predictive linear-quadratic optimal control for regulating the Mach number due to a test model disturbance during a continuous pitch

Nguyen, Nhan↗

Physical origins of current and temperature controlled negative differential resistances in NbO 2

Negative differential resistance behavior in oxide memristors, especially those using NbO 2 , is gaining renewed interest because of its potential utility in neuromorphic computing. However, there has been a decade-long controversy over whether the negative differential resistance is caused by a relatively low-temperature non-linear transport mechanism or a high-temperature Mott transition. Resolving this issue will enable consistent and robust predictive modeling of this phenomenon for different applications. Here in this paper, we examine NbO 2 memristors that exhibit both a current-controlled and a temperature-controlled negative differential resistance. Through thermal and chemical spectromicroscopy and numerical simulations, we confirm that the former is caused by a ~400 K non-linear-transport-driven instability and the latter is caused by the ~1000 K Mott metal-insulator transition, for which the thermal conductance counter-intuitively decreases in the metallic state relative to the insulating state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental validation of a numerical model predicting the charging characteristics of Teflon and Kapton under electron beam irradiation

The effect differential charging of spacecraft thermal control surfaces is assessed by studying the dynamics of the charging process. A program to experimentally validate a computer model of the charging process was established. Time resolved measurements of the surface potential were obtained for samples of Kapton and Teflon irradiated with a monoenergetic electron beam. Results indicate that the computer model and experimental measurements agree well and that for Teflon, secondary emission is the governing factor. Experimental data indicate that bulk conductivities play a significant role in the charging of Kapton.

Hazelton, R. C.↗

Autothermal reforming of gasoline for fuel cell applications : a control-oriented dynamic model.

In this work, we develop a control-oriented, reduced order dynamic model of an autothermal reforming (ATR) reactor. The targeted application is within the on-board fuel-processing unit of a fuel cell vehicle. A previous effort has illustrated that a predictive-type controller may be required to achieve desired performance within this application. The objective of the current effort is to determine the existence of a reduced order model with enough speed and accuracy to meet the online computational demands of a predictive controller. Central to the model development is an approximation of reaction rates that achieve reasonable accuracy near the inlet while preserving the overall energy balance. The resulting scheme converts a partial differential equation model into a set of ordinary differential/algebraic equations and achieves nearly a 4 orders of magnitude improvement in computational speed while preserving most of the nonlinear characteristics of the original system. Such results give clear indication that the hurdle of computational viability can be overcome and opens the door for further development of a predictive controller for the ATR application.

02 PETROLEUM↗

Dynamics of one- and two-dimensional fronts in a bistable equation with time-delayed global feedback: Propagation failure and control mechanisms

We study the evolution of fronts in a bistable equation with time-delayed global feedback in the fast reaction and slow diffusion regime. This equation generalizes the Hodgkin-Grafstein and Allen-Cahn equations. We derive a nonlinear equation governing the motion of fronts, which includes a term with delay. In the one-dimensional case this equation is linear. We study the motion of one- and two-dimensional fronts, finding a much richer dynamics than for the previously studied cases (without time-delayed global feedback). We explain the mechanism by which localized fronts created by inhibitory global coupling loose stability in a Hopf bifurcation as the delay time increases. We show that for certain delay times, the prevailing phase is different from that corresponding to the system in the absence of global coupling. Numerical simulations of the partial differential equation are in agreement with the analytical predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large space structure model reduction and control system design based upon actuator and sensor influence functions

A model reduction procedure based on aggregation with respect to sensor and actuator influences rather than modes is presented for large systems of coupled second-order differential equations. Perturbation expressions which can predict the effects of spillover on both the aggregated and residual states are derived. These expressions lead to the development of control system design constraints which are sufficient to guarantee, to within the validity of the perturbations, that the residual states are not destabilized by control systems designed from the reduced model. A numerical example is provided to illustrate the application of the aggregation and control system design method.

Yam, Y.↗

Probabilistic Modeling of Landfill Subsidence Introduced by Buried Structure Collapse - 13229

The long-term reliability of land disposal facility final cover systems - and therefore the overall waste containment - depends on the distortions imposed on these systems by differential settlement/subsidence. The evaluation of differential settlement is challenging because of the heterogeneity of the waste mass and buried structure placement. Deterministic approaches to long-term final cover settlement prediction are not able to capture the spatial variability in the waste mass and sub-grade properties, especially discontinuous inclusions, which control differential settlement. An alternative is to use a probabilistic model to capture the non-uniform collapse of cover soils and buried structures and the subsequent effect of that collapse on the final cover system. Both techniques are applied to the problem of two side-by-side waste trenches with collapsible voids. The results show how this analytical technique can be used to connect a metric of final cover performance (inundation area) to the susceptibility of the sub-grade to collapse and the effective thickness of the cover soils. This approach allows designers to specify cover thickness, reinforcement, and slope to meet the demands imposed by the settlement of the underlying waste trenches. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗