Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffusion & dynamics of clusters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Defect cluster and nonequilibrium gas bubble associated growth in irradiated UMo fuels – a cluster dynamics and phase field model

Irradiation examination shows that gas bubble swelling kinetics is much faster after irradiation-induced recrystallization than that prior recrystallization in UMo fuels. It implies that gas bubbles in coarse grains and small recrystallized grains have different growth behavior. In this work, a phase-field model of gas bubble evolution integrating microstructure dependent cluster dynamics has been developed, for the first time, to study the gas bubble swelling behavior in the recrystallization zone of UMo fuels. Generation, diffusion, reaction, sink, emission and clustering of vacancies and interstitials are described by the cluster dynamics model while a phase-field model is used to describe the evolution of non-equilibrium gas bubbles including nucleation and growth. With the coupled model, the effect of defect generation rate, clustering rate, interstitial emission and sink rates on grain boundaries on the gas bubble evolution are systematically simulated. A set of model parameters (defect generation rate, clustering rate, interstitial emission and sink rates) is determined by comparing measured and simulated gas bubble swelling kinetics. The results demonstrate that interstitial clustering is one of the important physical mechanisms which results in a fast gas bubble swelling kinetics in the recrystallization zone. The developed model can also be extended to study the associated growth of defect and second phase precipitates often observed in irradiated materials.

Hu, Shenyang↗

Modeling of fission gas diffusion and release for Gd 2 O 3 doped UO 2

Uranium dioxide (UO 2 ) is the primary nuclear fuel in light water reactors, and its excess neutronic reactivity can be controlled by adding burnable absorbers, such as Gd 2 O 3 . This burnable absorber has a large neutron absorption cross-section, lowering the high reactivity of the reactor's initial fuel load. However, there needs to be more understanding of how added Gd 2 O 3 influences the properties of UO 2 under irradiation. To understand the behavior of defects and fission gas in the UO 2 /Gd 2 O 3 system under irradiation, we use cluster dynamics modeling supported by density functional theory calculations. First, we calculate the formation energies of Gd point and cluster defects, and evaluate the temperature-dependent defect concentrations using the defect formation energies and entropies. We show that Gd is soluble in UO 2 , introducing a negative charge in the system. Using this information, we adapted the cluster dynamics code Centipede to model the influence of Gd on U self-diffusion and Xe diffusion in UO 2 with 10 wt% Gd 2 O 3 . Also, we analyzed the Xe diffusion as a function of Gd 2 O 3 concentration, showing that the Xe diffusivity is decreased, which means that the athermal diffusivity due to electronic stopping persists at higher temperatures. In conclusion, the decrease in Xe diffusion means that more Xe stays in the matrix, decreasing the Xe release, and lowering its influence of fission gas release on the thermomechanical properties of UO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Morphology–Diffusivity Relationships in Fluorine-Free Random Terpolymers for Proton-Exchange Membranes

Here, using atomistic molecular dynamics simulations, we investigate the morphology and transport properties of a new family of fluorine-free terpolymers designed as proton-exchange membranes. Simulated random terpolymers consist of three monomers with a 5-carbon backbone with a phenylsulfonate, phenyl, or no pendant group and have ion exchange capacities (IECs) ranging from 1.06–4.14 mmol/g. At a hydration level of 9, cluster analysis reveals macrophase separation between water and terpolymers with IEC < 2.1 mmol/g and continuous, percolated hydrophilic and hydrophobic nanoscale domains at higher IECs. Channel width distribution analysis of the percolated morphologies revealed that more hydrophobic units produce less uniform channels. Decreasing the surface area per sulfonate group and increasing the fractal dimension of the hydrophilic domains correlate with increased water diffusivity, due to a more acidic interface and more isotropic water channels. Relative to the previously studied phenylsulfonate homopolymer, these terpolymers with lower IECs have only modestly lower water diffusion, and we anticipate other advantages related to processability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Random sub-diffusion and capture of genes by the nuclear pore reduces dynamics and coordinates inter-chromosomal movement

Hundreds of genes interact with the yeast nuclear pore complex (NPC), localizing at the nuclear periphery and clustering with co-regulated genes. Dynamic tracking of peripheral genes shows that they cycle on and off the NPC and that interaction with the NPC slows their sub-diffusive movement. Furthermore, NPC-dependent inter-chromosomal clustering leads to coordinated movement of pairs of loci separated by hundreds of nanometers. We developed fractional Brownian motion simulations for chromosomal loci in the nucleoplasm and interacting with NPCs. These simulations predict the rate and nature of random sub-diffusion during repositioning from nucleoplasm to periphery and match measurements from two different experimental models, arguing that recruitment to the nuclear periphery is due to random sub-diffusion and transient capture by NPCs. Finally, the simulations do not lead to inter-chromosomal clustering or coordinated movement, suggesting that interaction with the NPC is necessary, but not sufficient, to cause clustering.

59 BASIC BIOLOGICAL SCIENCES↗

Accurate and efficient parameterization of an atomic cluster expansion (ACE) potential for ammonia under extreme conditions

We present a machine learning interatomic potential for ammonia designed to capture its complex multiphase behavior, including both molecular and superionic phases. The potential is based on the atomic cluster expansion (ACE) formulation and has been parameterized to facilitate high-fidelity molecular dynamics simulations of ammonia under extreme conditions, for pressures up to 100 GPa and for temperatures above 500 K and up to 6000 K. A diverse range of configurations was generated through high-quality ab initio molecular dynamics simulations, covering insulating and superionic ice phases, liquid ammonia, molecular nitrogen (N 2 ) and hydrogen (H 2 ), and metastable compounds that form upon dissociation, including $NH^{+}_{4}$, $H^{+}_{3}$, N 2 H 4 , and N 3 H. We demonstrate that the ammonia ACE potential accurately reproduces experimental and density functional theory predicted isotherms and Hugoniots. Crucially, the potential is able to capture the intricate phase behavior of ammonia, including the transition from insulating molecular fluid to the superionic phase. This work provides a robust interatomic potential that can be used for large-scale, accurate simulations of ammonia under extreme thermodynamic conditions, offering a powerful tool for investigating its behavior in various phases and applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-induced gradual polymorphic structural crossover in liquid indium, tin, and antimony

Temperature-induced polymorphic structural crossover in metallic liquid indium (In), tin (Sn), and antimony (Sb) is investigated by in situ high-energy x-ray diffraction and ab initio molecular dynamics simulations. The results demonstrate the existence of a temperature-induced reversible and gradual structural crossover in these three liquids, reflecting from both “static” structures, e.g., peak positions of the structure factor and pair distribution function, bond angle distribution, number of tetrahedra, cluster connection, free volume, and dynamical behaviors, including the relaxation time, diffusion coefficient, and non-Gaussian parameter. Further, the main difference from liquid In, Sn, to Sb is that not only the large-sized free volume but also the anharmonicity and the dynamical heterogeneity increase significantly with the appearance of strong covalent bonds. These findings will deepen the understanding of liquid structure and the liquid-liquid transition in metallic liquids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing Supercritical Phase Transition using Ultrafast X-ray Diagnostics (Final Technical Report)

Over recent years, several hypotheses have been put forward to elucidate supercritical transition states. Despite significant progress on the fundamental understanding of fluids at these supercritical conditions, important questions concerning the microstructure and dynamical processes remain. A particular research issue is hereby the fundamental understanding of the morphology of the molecular microstructure and its effect on the macroscopic behaviour and thermodynamic response functions. It is widely believed that the supercritical state is homogeneous without structural and dynamic observables to distinguish between a liquid and a vapor. However, recent investigations have identified regions of distinct liquid-like or vapor-like properties even under supercritical conditions. Specifically, it was shown that the transition between liquid-like and vapor-like states occurs across an extension to the coexistence line, marked by almost discontinuous changes in fluid properties. This transition was first identified experimentally by Nishikawa and Tanaka and stands in contrast to the classical presentation of the supercritical state space as a featureless, homogeneous domain. Structurally, the most important properties of supercritical fluids are the dynamic heterogeneities and local density fluctuations that are present within the fluid state at the microscopic level. These inhomogeneities are associated with the formation of molecular clusters of various sizes with liquid-like properties separated by voids of unbound gas-phase molecules which continuously restructure itself at picosecond timescales. By utilizing ultrafast X-ray Photon Correlation Spectroscopy (XPCS) at the Linac Coherent Light Source (LCLS) and X-ray synchrotron measurements as an experimental probe of these structural changes at the molecular level we seek to elucidate the higher-order phase transition from a liquid-like to a vapor-like state in the region extending the critical point. Open questions we seek to address particularly with XPCS are: (i) the underlying mechanisms responsible for the density fluctuations at supercritical conditions and how these dynamical processes at the molecular level affect the thermodynamic response functions and (ii) on what timescales do dynamical processes evolve that are associated with thermalization, molecular diffusion, and intermolecular cluster transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect and structural evolution under high-energy ion irradiation informs battery materials design for extreme environments

Understanding defect evolution and structural transformations constitutes a prominent research frontier for ultimately controlling the electrochemical properties of advanced battery materials. Herein, for the first time, we utilize in situ high-energy Kr ion irradiation with transmission electron microscopy to monitor how defects and microstructures evolve in Na- and Li-layered cathodes with 3d transition metals. Our experimental and theoretical analyses reveal that Li-layered cathodes are more resistant to radiation-induced structural transformations, such as amorphization than Na-layered cathodes. The underlying mechanism is the facile formation of Li-transition metal antisite defects in Li-layered cathodes. The quantitative mathematical analysis of the dynamic bright-field imaging shows that defect clusters preferentially align along the Na/Li ion diffusion channels ( a-b planes), which is likely governed by the formation of dislocation loops. Our study provides critical insights into designing battery materials for extreme irradiation environments and understanding fundamental defect dynamics in layered oxides.

25 ENERGY STORAGE↗

Irradiation enhanced diffusion and diffusional creep in U₃Si₂

U₃Si₂ is a candidate as an advanced fuel for light water reactors (LWRs). Compared to UO₂, there are significant data gaps for the thermophysical and thermomechanical properties of U₃Si₂. Atomic scale simulations can help fill in those gaps, while also providing a more mechanistic understanding of the material properties. Creep is an important property for fuel performance as it influences the pellet-cladding gap, which in turn affects the temperature of the fuel (a key parameter in many other aspects of fuel behavior). In this work, we employed a DFT-informed cluster dynamics framework to predict point defect concentrations in U₃Si₂. The concentrations, diffusivities, and volumes of these defects were used to develop a diffusional creep model based on bulk (Nabarro-Herring) and grain boundary (Coble) diffusion processes. It was found that irradiation enhanced Nabarro-Herring creep is dominant at low temperatures, while Coble creep dominates for high temperatures. The model compares well against available experimental data and has been implemented in BISON. A demonstration case using simple power profiles has been carried out, showing that negligible creep occurs due to the low temperatures experienced by U₃Si₂, a consequence of its high thermal conductivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Cellulose acetate membranes exhibit exceptional monovalent to divalent cation selectivities

Salt transport properties of cellulose acetate membranes are reported for a series of chloride salts with mono- valent and divalent cations (LiCl, NaCl, MgCl 2 , CaCl 2 ). Measurements include salt permeability and sorption, with diffusivity values calculated from the permeability and sorption results. We report an exceptionally high LiCl/MgCl 2 selectivity of 750:1. Salts with similar valence (LiCl and NaCl; MgCl 2 and CaCl 2 ) have similar transport properties. The high monovalent/divalent selectivity arises from differences in both sorption and diffusion, with a LiCl/MgCl 2 solubility selectivity of about 11 and a diffusivity selectivity of about 70. Atomistic molecular dynamics simulations show that ions tend to reside in isolated clusters of water. Increasing ion charge strengthens ion–water interactions relative to ion–polymer interactions, explaining the reduced sorption of divalent ions. Diffusion of ions through the membrane occurs via hop-like motion between water clusters. Lithium diffuses faster than magnesium due to weaker ion–water coordination for lithium, which allows for greater mobility within water clusters and more frequent hopping. Altogether, our atomistic simulations suggest that the high LiCl/MgCl 2 selectivity is linked to cellulose acetate’s high water/salt selectivity and is a consequence of low water content and relatively uniform water distribution.

36 MATERIALS SCIENCE↗

Ab Initio Molecular Dynamics Study of Pd Nucleation on a γ-Al 2 O 3 Surface

We perform ab initio molecular dynamics (AIMD) free energy simulations to investigate the stability and dynamics of dispersed Pd atoms and subnanometer clusters on γ-Al 2 O 3 . We consider nucleation for varying Pd loadings on dry γ-Al 2 O 3 (100), dry γ-Al 2 O 3 (110) and wet γ-Al 2 O 3 (110) and examine temperature, entropy and water coverage effects on the stability and dynamics of Pd clusters. At low Pd loading (1.07 Pd atoms/nm 2 on the (100) and 0.75 Pd/nm 2 on the (110)), association of the Pd atoms is thermodynamically unfavorable on the dry surfaces and almost thermoneutral on the wet (110) owing to water blocking of the AlIII defect sites. In agreement with past studies, the Pd atoms are quite mobile but the diffusion free energy barriers do not increase with the water coverage, as previously suggested, but rather remain similar in magnitude owing to translational entropy at finite temperatures. At these Pd loadings, oxidized Pd(II) atoms on the wet (110) surface are dispersed and immobile. At higher Pd loading (1.12 and 1.5 Pd atoms/nm 2 ) on the (110) surface, Pd 3 and Pd 4 clusters are thermodynamically very stable and form fast. At the 1.12 Pd atoms/nm 2 loading, the formation of the Pd 3 cluster is two orders of magnitude slower when the surface is hydroxylated as the system becomes somewhat trapped before the dinuclear cluster Pd 2 collides with a Pd atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Critical magnetic Reynolds number of the turbulent dynamo in collisionless plasmas

The intracluster medium of galaxy clusters is an extremely hot and diffuse, nearly collisionless plasma, which hosts dynamically important magnetic fields of ~μG strength. Seed magnetic fields of much weaker strength of astrophysical or primordial origin can be present in the intracluster medium. In collisional plasmas, which can be approximated in the magnetohydrodynamical (MHD) limit, the turbulent dynamo mechanism can amplify weak seed fields to strong dynamical levels efficiently by converting turbulent kinetic energy into magnetic energy. However, the viability of this mechanism in weakly collisional or completely collisionless plasma is much less understood. In this study, we explore the properties of the collisionless turbulent dynamo using three-dimensional hybrid-kinetic particle-in-cell simulations. We explore the properties of the collisionless turbulent dynamo in the kinematic regime for different values of the magnetic Reynolds number, Rm, initial magnetic-to-kinetic energy ratio, (E mag /E kin ) i , and initial Larmor ratio, (r Larmor /L box ) i , i.e. the ratio of the Larmor radius to the size of the turbulent system. We find that in the ‘un-magnetized’ regime, (r Larmor /L box ) i > 1, the critical magnetic Reynolds number for the dynamo action Rm crit ≈ 107 ± 3. In the ‘magnetized’ regime, (r Larmor /L box ) i ≲ 1, we find a marginally higher Rm crit = 124 ± 8. We find that the growth rate of the magnetic energy does not depend on the strength of the seed magnetic field when the initial magnetization is fixed. We also study the distribution and evolution of the pressure anisotropy in the collisionless plasma and compare our results with the MHD turbulent dynamo.

79 ASTRONOMY AND ASTROPHYSICS↗

Coupled cluster and dislocation dynamics modeling of microstructure evolution in irradiated materials

We develop here a coupled cluster and dislocation dynamics framework to study the microstructure evolution of irradiated materials. The framework not only accounts for the three dimensional diffusion of radiation-generated clusters, but also their interaction with dislocation networks and the resultant climb motion of discrete dislocations within finite crystals. The framework is solved with a superposition solution scheme, and is applied to investigate the evolution of the irradiation-induced dislocation loops in zirconium (Zr), considering the effects of various bias factors including the diffusion anisotropy difference (DAD) of interstitials and interstitial clusters, the dislocation bias of defects to discrete dislocation segments, and the production bias of defects from the radiation cascade. We find that the DAD is the most critical factor influencing the kinetics of the loop evolution in Zr, while the recombination/interaction of mobile defects can induce a strong spatial dependence of the loop evolution together with the DAD. Here, the method is also adopted to study the evolution of interstitial $\langle$a$\rangle$ and vacancy $\langle$c$\rangle$ dislocation loop ensembles consistent with the microstructure observed during irradiation-induced growth of Zr. Our findings not only reveal the spatial dependence of the size and ellipticity of the dislocation loops, but also suggest a limit on the anisotropy factor of interstitials to reproduce the co-growth of $\langle$a$\rangle$ and $\langle$c$\rangle$ loops in zirconium, in good agreement with experimental observations and other simulation results.

Bias factors↗

Spin Decoherence Dynamics of Er 3+ in CeO 2 Films

Developing telecom-compatible spin-photon interfaces is essential towards scalable quantum networks. Erbium ions (Er 3+ ) exhibit a unique combination of a telecom (1.5 mu m) optical transition and an effective spin-1=2 ground state, but identifying a host that enables heterogeneous device integration while preserving long optical and spin coherence remains an open challenge. In this work, we explore the potential of Er 3+ :CeO 2 films on silicon and study the Er 3+ spin coherence, offering low nuclear spin density and the potential for on-chip integration. We demonstrate a 38.8 mu s spin coherence, which can be extended to 176.4 mu s with dynamical decoupling. Pairing experiments with cluster correlation expansion calculations, we identify spectral diffusion induced by bath Er 3+ spin flip-flops as the dominant decoherence mechanism and provide pathways to millisecond-scale coherence.

36 MATERIALS SCIENCE↗

Spin dynamics of the antiferromagnetic Heisenberg model on a kagome bilayer

We research the spin dynamics of a classical Heisenberg antiferromagnet with nearest-neighbor interactions on a quasi-two-dimensional kagome bilayer. This geometrically frustrated lattice consists of two kagome layers connected by a triangular-lattice linking layer. By combining Monte Carlo with precessional spin dynamics simulations, we compute the dynamical structure factor of the classical spin liquid in the kagome bilayer and investigate the thermal and dilution effects. While the low-frequency and long-wavelength dynamics of the cooperative paramagnetic phase is dominated by spin diffusion, weak magnon excitations persist at higher energies, giving rise to the half-moon pattern in the dynamical structure factor. In the presence of spin vacancies, the dynamical properties of the diluted system can be understood within the two-population picture. The spin diffusion of the “correlated” spin clusters is mainly driven by the zero-energy weather-vane modes, giving rise to an autocorrelation function that decays exponentially with time. On the other hand, the diffusive dynamics of the quasifree “orphan” spins leads to a distinctive longer-time power-law tail in the autocorrelation function. We discuss the implications of our work for the glassy behaviors observed in the archetypal frustrated magnet SrCr 9p Ga 12-9 pO 19 (SCGO).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Predicting 3D moisture sorption behavior of materials from 1D investigations

Abstract Moisture in materials can be a source of future outgassing and exacerbate unwanted changes in physical and chemical properties. Here, we investigate the effect of sample size and shape on the moisture transport phenomena through a combined experimental and modeling approach. Several different materials varying in size and shape were investigated over a wide range of relative humidities (0–90%) and temperatures ( $$30{-}70^{\,\circ } \hbox {C}$$ 30 - 70 ∘ C ) using gravimetric type dynamic vapor sorption (DVS). A dynamic triple-mode sorption model, developed previously, was employed to describe the experimental results with good success; the model includes absorption, adsorption, pooling (clustering) of species, and molecular diffusion. Here we show that the full triple-mode sorption model is robust enough to predict the dynamic uptake and outgassing of 3-dimensional (3D) samples using parameters derived from quasi-1D samples. This successful demonstration on three different materials (filled polydimethylsiloxane (PDMS), unfilled PDMS, and ceramic inorganic composite) illustrates that the model is robust at describing the scale-independent physics and chemistry of moisture sorption and diffusion materials. This work demonstrates that while sorption mechanisms manifest in testing of all sample sizes, some of these mechanisms were so subtle that they were overlooked in our initial modeling and assessment, illustrating the importance of multi-scale experiments in the development of robust predictive capabilities. Our study also outlines the challenges and viable solutions for global optimization of a multi-parameter model. The ability to quantify moisture sorption and diffusion, independent of scale, using 1D lab-scale experiments enables prediction of long-term bulk materials behavior in real applications.

36 MATERIALS SCIENCE↗

Mapping the Temperature-dependent and network site-specific onset of spectral diffusion at the surface of a water cluster cage

We explore the kinetic processes that sustain equilibrium in a microscopic, finite system. This is accomplished by monitoring the spontaneous, time-dependent frequency evolution (the frequency autocorrelation) of a single OH oscillator, embedded in a water cluster held in a temperature-controlled ion trap. The measurements are carried out by applying two-color, IR-IR photodissociation mass spectrometry to the D3O+?(HDO)(D2O)19 isotopologue of the “magic number” protonated water cluster, H+?(H2O)21. The OH group can occupy any one of the five spectroscopically distinct sites in the distorted pentagonal dodecahedron cage structure. The OH frequency is observed to evolve over tens of milliseconds in the temperature range (90-120 K). Starting at 100 K, large “jumps” are observed between two OH frequencies separated by ~300 cm-1 indicating migration of the OH group from the bound OH site at 3350 cm-1 to the free position at 3686 cm-1. Increasing the temperature to 110 K leads to partial interconversion among many sites. All sites are observed to interconvert at 120 K such that the distribution of the unique OH group among them adopts the form one would expect for a canonical ensemble. The spectral dynamics displayed by the clusters thus offer an unprecedented view into the molecular-level processes that drive spectral diffusion in an extended network of water molecules.

Yang, Nan↗