Investigation of the reinforcement of ductile metals with strong, high modulus discontinuous brittle fibers Quarterly report
Factors affecting reinforcement of aluminum with boron carbide whiskers
REINFORCED MATERIAL↗
SEARCH · Search NASA
Results for “Discontinuity Factors”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Quantitative analysis of geomorphic processes using satellite image data at different scales
When aerial and satellite photographs and images are used in the quantitative analysis of geomorphic processes, either through direct observation of active processes or by analysis of landforms resulting from inferred active or dormant processes, a number of limitations in the use of such data must be considered. Active geomorphic processes work at different scales and rates. Therefore, the capability of imaging an active or dormant process depends primarily on the scale of the process and the spatial-resolution characteristic of the imaging system. Scale is an important factor in recording continuous and discontinuous active geomorphic processes, because what is not recorded will not be considered or even suspected in the analysis of orbital images. If the geomorphic process of landform change caused by the process is less than 200 m in x to y dimension, then it will not be recorded. Although the scale factor is critical, in the recording of discontinuous active geomorphic processes, the repeat interval of orbital-image acquisition of a planetary surface also is a consideration in order to capture a recurring short-lived geomorphic process or to record changes caused by either a continuous or a discontinuous geomorphic process.
Williams, R. S., Jr.↗
Two-Dimensional Thermal Boundary Layer Corrections for Convective Heat Flux Gauges
This work presents a CFD (Computational Fluid Dynamics) study of two-dimensional thermal boundary layer correction factors for convective heat flux gauges mounted in flat plate subjected to a surface temperature discontinuity with variable properties taken into account. A two-equation k - omega turbulence model is considered. Results are obtained for a wide range of Mach numbers (1 to 5), gauge radius ratio, and wall temperature discontinuity. Comparisons are made for correction factors with constant properties and variable properties. It is shown that the variable-property effects on the heat flux correction factors become significant
Kandula, Max↗
A study of elastic and plastic stress concentration factors due to notches and fillets in flat plates
Six large 24s-t3 aluminum-alloy-sheet specimens containing various notches or fillets were tested in tension to determine their stress concentration factors in both the elastic and plastic ranges. The elastic stress concentration factors were found to be slightly higher than those calculated by Neuber's method and those obtained photoelastically by Frocht. The results showed further that the stress concentration factor decreases as strains at the discontinuity enter the plastic range. A generalization of Stowell's relation for the plastic stress concentration factor at a circular hole in an infinite plate was applied to the specimen shapes tested and gave good agreement with test results.
Hardrath, Herbert F↗
Compositional vs. thermal buoyancy and the evolution of subducted lithosphere
We formulate 2-D Cartesian finite element models that explore the fate of compositionally defined lithosphere as it encounters a viscosity increase at the boundary between the upper and lower mantle. Subducted lithosphere is represented as a cold, stiff, layered composite of denser eclogite underlain by more buoyant harzburgite. Slabs impinging on a lower mantle 30 and 100 times more viscous than the upper mantle thicken and fold strongly as they penetrate the lower mantle. Approximately a factor of two thickening occurs via pure shear just above the discontinuity, with additional enhancement due to folding by over a factor of two. No separation of the individual slab components occurs at the discontinuity, and direct comparison with models in which compositional buoyancy is explicitly ignored indicates that slab evolution is largely controlled by the thermal buoyancy. These results are at odds with hypotheses about slab evolution in which the compositional buoyancy contributions lead to component separation and the formation of slab megaliths or a compositionally layered upper mantle.
Gaherty, James B.↗
Complex Fluid‐Driven Fractures Caused by Crack‐Parallel Stress
Abstract Managing fluid‐driven fracture networks is crucial for subsurface resource utilization, yet the current understanding of the key controlling factors remains insufficient. While geologic discontinuities have been shown to significantly influence fracture network complexity, this study identifies another major contributor. We conducted a new set of experiments using a transparent true triaxial cell, which enabled video recording of the temporal evolution of fluid‐driven fracture paths. Using pseudo‐2D samples without macroscale structural discontinuities, we observed multiple occurrences of hydraulic fracture curving and branching under anisotropic boundary stresses. We proposed a theoretical model demonstrating that the stress parallel to the crack line in the solid matrix near the crack tip (i.e., the T ‐stress) accounts for the observed fracture curving behavior. This finding suggests that T ‐stress is an additional mechanism contributing to the complexity of fluid‐driven fracture networks in the subsurface, besides the geologic discontinuities.
58 GEOSCIENCES↗
Symptoms and Systemic Drug Reactions in Persons Receiving Weekly Rifapentine Plus Isoniazid (3HP) Treatment for Latent Tuberculosis Infection
Abstract Background Three months of weekly rifapentine plus isoniazid (3HP) therapy for latent tuberculosis infection (LTBI) is recommended worldwide. The development of symptoms and systemic drug reactions (SDRs) on 3HP have not been fully characterized. We aimed to determine the patterns of symptom development and identify SDRs and associated factors in patients taking 3HP. Methods We analyzed symptoms data in participants receiving 3HP in the Tuberculosis Trials Consortium's iAdhere study (Study 33). We examined the patterns of symptom reporting across participants from baseline and 4 monthly visits. Bivariate analyses and multivariable regression models were used to identify factors associated with SDRs. Risk ratios (RRs) and 95% confidence intervals (CIs) were calculated. Results Among 1002 participants receiving 3HP, 768 (77%) reported at least 1 symptom; 97% of these symptoms were grade 1 (79%) or grade 2 (18%). Most symptoms developed in the first month and resolved. A total of 111 (11%) participants had symptoms that met criteria for SDRs; however, 53 (48%) of these participants completed therapy. Factors associated with SDRs and discontinuation included female sex (RR: 2.05; 95% CI: 1.19–3.54), age ≥45 years (RR: 1.99; 95% CI: 1.19–3.31), and use of concomitant medications (RR: 2.26; 95% CI: 1.15–4.42). Conclusions Although most patients receiving 3HP reported symptoms, most were mild, occurred early, and resolved without stopping treatment. Among patients experiencing SDRs, nearly half were able to complete therapy. Patient and provider education should focus on differentiating severe reactions where 3HP should be stopped from minor symptoms that will resolve. Clinical Trials Registration. NCT01582711.
Immunology↗
The nonlinear modified equation approach to analyzing finite difference schemes
The nonlinear modified equation approach is taken in this paper to analyze the generalized Lax-Wendroff explicit scheme approximation to the unsteady one- and two-dimensional equations of gas dynamics. Three important applications of the method are demonstrated. The nonlinear modified equation analysis is used to (1) generate higher order accurate schemes, (2) obtain more accurate estimates of the discretization error for nonlinear systems of partial differential equations, and (3) generate an adaptive mesh procedure for the unsteady gas dynamic equations. Results are obtained for all three areas. For the adaptive mesh procedure, mesh point requirements for equal resolution of discontinuities were reduced by a factor of five for a 1-D shock tube problem solved by the explicit MacCormack scheme.
Klopfer, G. H.↗
A family of independent Variable Eddington Factor methods with efficient preconditioned iterative solvers
We present a family of discretizations for the Variable Eddington Factor (VEF) equations that have high-order accuracy on curved meshes and efficient preconditioned iterative solvers. The VEF discretizations are combined with the Discontinuous Galerkin transport discretization from to form effective high-order, linear transport methods. The VEF discretizations are derived by extending the unified analysis of Discontinuous Galerkin methods for elliptic problems presented by Arnold et al. to the VEF equations. This framework is used to define analogs of the interior penalty, second method of Bassi and Rebay, minimal dissipation local Discontinuous Galerkin, and continuous finite element methods. The analysis of subspace correction preconditioners, which use a continuous operator to iteratively precondition the discontinuous discretization, is extended to the case of the non-symmetric VEF system. Numerical results demonstrate that the VEF discretizations have arbitrary-order accuracy on curved meshes, preserve the thick diffusion limit, and are effective on a proxy problem from thermal radiative transfer in both outer transport iterations and inner preconditioned linear solver iterations. We demonstrate that the VEF solution converges to the S N transport solution as the mesh is refined on both problems with smooth and non-smooth behavior in angle. Parallel performance studies show that the interior penalty VEF discretization's linear solve weak scales out to 1024 processors and strong scales well on a single node. Particular attention is paid to the parallel performance of the VEF algorithm when used in combination with a parallel block Jacobi transport sweep.
97 MATHEMATICS AND COMPUTING↗
Weld stresses beyond elastic limit: Materials discontinuity
When welded structures depend on properties beyond the elastic limit to qualify their ultimate safety factor, and weld-parent materials abruptly change at the interface, then stress discontinuity is inevitable. The stress concentration is mildly sensitive to material relative strain hardening and acutely sensitive to applied stress fields. Peak stresses occur on the weld surface, at the interface, and dissipate within a 0.01-inch band. When the stress is intense, the weld will always fracture at the interface. The analysis incorporates a classical mechanics model to more sharply define stress spikes within the bandwidth, and suggests a relative material index and Poisson's ratio related to strain hardening. Implications are discussed which are applicable to industries of high performance structures.
Verderaime, V.↗
Investigation of the reinforcement of ductule metals with strong, high modulus discontinuous, brittle fibers Quarterly report, 1 May - 1 Aug. 1968
Factors affecting tensile strength of ductile metals reinforced with short, brittle fibers
Berry, J. M.↗
The magnetopause as a tangential discontinuity for large field rotation angles
Three passes of the ISEE 1 and 2 satellites through the dayside terrestrial magnetopause are discussed where the magnetopause is identified as a tangential discontinuity. This identification is based primarily on the failure of the plasma and magnetic field data to satisfy the conditions for a rotational discontinuity. In all these cases the interplanetary magnetic field was directed strongly southward and the angles between the fields on the two sides of the magnetopause ranged between 136 deg and 170 deg. As this is precisely the field geometry thought to be most conducive for reconnection, the magnetopause would be expected to be a rotational discontinuity. The simplest explanation of this result would appear to be that the magnetic field orientation is not the only factor controlling the onset of reconnection. However, as the identification of the discontinuity applies only locally, it cannot be excluded that for the magnetic field conditions investigated here, different portions of the magnetopause can be described as tangential and rotational discontinuities simultaneously.
Papamastorakis, I.↗
An Innovative Insight into Performance Degradation of NCM111 Cathode Induced by Suspension of Operation
The lifespan of lithium-ion batteries varies enormously from fundamental study to practical applications. This big difference has been typically ascribed to the high degree of uncertainty in unpredictable and complicated operation conditions in real-life applications. Here, in this paper, we report that the pause of the charging–discharging process, which is frequently operated in practice but rarely studied in academics, is an important reason for the performance degradation of the NCM111 cathode. It is found that the pause during cycling could trigger a remarkable drop in capacity, giving rise to ~30% more capacity decay compared with the continuously cycled sample. In situ synchrotron X-ray diffraction analysis reveals that the harmful H1–H2 phase transition, which typically appears in the initial cycle but disappears in subsequent cycles, is reactivated by the pausing process. The anisotropic lattice strains that occur during the H1–H2 transition result in mechanical fractures that terminate with an inert NiO-type rock-salt phase on the surface of particles. The present study indicates that the discontinuous usage of rechargeable batteries is also a key factor for cycle life, which might provide a distinct perspective on the performance decay in practical applications.
25 ENERGY STORAGE↗
Thermal infrared opacity of the Mars atmosphere
An analytical technique is presented for the deriving Mars atmosphere opacity from data furnished by the IR Thermal Mapper (IRTM) instruments on the Viking landers. Each IRTM features four telescopes for viewing Mars in six spectral bands and seven spatial fields of view. The present study focuses on 20 microns measurements of the thermal inertia, 0.3-3.0 microns data for the surface albedo, and, finally, the 7, 9, and 15 microns data for the actual opacity derivations. The model takes into account the atmospheric temperature profile, scattering by dust, the surface emissivity and the variation of the surface/atmosphere temperature discontinuity. Analyses are carried out of the possible error factors and the model is used to generate opacity histories for the two Viking Lander sites. The results, when compared with other astronomical data, indicate that the method is sufficiently accurate to use opacity data to analyze the processes of storm genesis and to study local storms.
Martin, T. Z.↗
Magnetosheath Flow Anomalies in 3-D
Measurements of the plasma and magnetic field with high temporal resolution on the Interball Tail probe reveal many flow anomalies in the magnetosheath. They are usually seen as flow direction and number density variations, accompanied by magnetic field discontinuities. Large flow anomalies with number density variations of factor of 2 or more and velocity variations of 100 km/s or more are seen with periodicity of about I per hour. The cases of flow anomalies following in succession are also observed, and suggest their decay while propagating through the magnetosheath. Some magnetospheric disturbances observed in the outer magnetosphere after the satellite has crossed the magnetopause on the inbound orbit suggest their association with magnetosheath flow anomalies observed in the magnetosheath prior to magnetopause crossing.
Vaisberg, O. L.↗
Three-Dimensional Thermal Boundary Layer Corrections for Circular Heat Flux Gauges Mounted in a Flat Plate with a Surface Temperature Discontinuity
Three-dimensional Navier-Stokes computational fluid dynamics (CFD) analysis has been performed in an effort to determine thermal boundary layer correction factors for circular convective heat flux gauges (such as Schmidt-Boelter and plug type)mounted flush in a flat plate subjected to a stepwise surface temperature discontinuity. Turbulent flow solutions with temperature-dependent properties are obtained for a free stream Reynolds number of 1E6, and freestream Mach numbers of 2 and 4. The effect of gauge diameter and the plate surface temperature have been investigated. The 3-D CFD results for the heat flux correction factors are compared to quasi-21) results deduced from constant property integral solutions and also 2-D CFD analysis with both constant and variable properties. The role of three-dimensionality and of property variations on the heat flux correction factors has been demonstrated.
Kandula, M.↗
Balmer continuous emission and polarization in Be stars
Observations by OAO-2 of two Be stars, gamma Cassiopeiae and 60 Cygni, are analyzed to show that unpolarized radiation produced by Balmer continuous emission in the extended atmospheres of Be stars is probably a significant factor in explaining the polarization observed shortwards of the Balmer discontinuity. The ratio of the energy flux of Be stars to normal B stars with the same amount of reddening varies from about 1.4 at 3600 A to 1.05 at 2500 A. This is interpreted as due to Balmer continuous emission in the Be stars. For gamma Cas the polarizations at 3300 and 3600 A are respectively 0.6 and 0.7 of the values one expects from interstellar polarization.
Coyne, G. V.↗
Method for calculating lift distributions for unswept wings with flaps or ailerons by use of nonlinear section lift data
A method is presented which allows the use of nonlinear section lift data in the calculation of the spanwise lift distribution of unswept wings with flaps or ailerons. This method is based upon lifting line theory and is an extension to the method described in NACA rep. 865. The mathematical treatment of the discontinuity in absolute angle of attack at the end of the flap or aileron involves the use of a correction factor which accounts for the inability of a limited trigonometric series to represent adequately the spanwise lift distribution. A treatment of the apparent discontinuity in maximum section lift coefficient is also described. Simplified computing forms containing detailed examples are given for both symmetrical and asymmetrical lift distributions. A few comparisons of calculated characteristics with those obtained experimentally are also presented.
Sivells, James C↗