Search NASA⌕ Search

SEARCH · Search NASA

Results for “Discontinuity Factors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Three-Dimensional Thermal Boundary Layer Corrections for Circular Heat Flux Gauges Mounted in a Flat Plate with a Surface Temperature Discontinuity

Three-dimensional Navier-Stokes computational fluid dynamics (CFD) analysis has been performed in an effort to determine thermal boundary layer correction factors for circular convective heat flux gauges (such as Schmidt-Boelter and plug type)mounted flush in a flat plate subjected to a stepwise surface temperature discontinuity. Turbulent flow solutions with temperature-dependent properties are obtained for a free stream Reynolds number of 1E6, and freestream Mach numbers of 2 and 4. The effect of gauge diameter and the plate surface temperature have been investigated. The 3-D CFD results for the heat flux correction factors are compared to quasi-21) results deduced from constant property integral solutions and also 2-D CFD analysis with both constant and variable properties. The role of three-dimensionality and of property variations on the heat flux correction factors has been demonstrated.

Kandula, M.↗
NASA NTRS1972

Balmer continuous emission and polarization in Be stars

Observations by OAO-2 of two Be stars, gamma Cassiopeiae and 60 Cygni, are analyzed to show that unpolarized radiation produced by Balmer continuous emission in the extended atmospheres of Be stars is probably a significant factor in explaining the polarization observed shortwards of the Balmer discontinuity. The ratio of the energy flux of Be stars to normal B stars with the same amount of reddening varies from about 1.4 at 3600 A to 1.05 at 2500 A. This is interpreted as due to Balmer continuous emission in the Be stars. For gamma Cas the polarizations at 3300 and 3600 A are respectively 0.6 and 0.7 of the values one expects from interstellar polarization.

Coyne, G. V.↗
NASA NTRS1952

Method for calculating lift distributions for unswept wings with flaps or ailerons by use of nonlinear section lift data

A method is presented which allows the use of nonlinear section lift data in the calculation of the spanwise lift distribution of unswept wings with flaps or ailerons. This method is based upon lifting line theory and is an extension to the method described in NACA rep. 865. The mathematical treatment of the discontinuity in absolute angle of attack at the end of the flap or aileron involves the use of a correction factor which accounts for the inability of a limited trigonometric series to represent adequately the spanwise lift distribution. A treatment of the apparent discontinuity in maximum section lift coefficient is also described. Simplified computing forms containing detailed examples are given for both symmetrical and asymmetrical lift distributions. A few comparisons of calculated characteristics with those obtained experimentally are also presented.

Sivells, James C↗
NASA NTRS1983

Airborne measurements of laser backscatter from the ocean surface

The data are taken with three different pulsed laser sources, one each in the ultraviolet (337.1 nm), visible (532.1 nm) and infrared (9.5 microns). The principal instrument is the airborne oceanographic lidar of the NASA Wallops Flight Facility. The data on mean laser backscatter and its variation with angle off nadir are found to be consistent with previous analytical work and some previous experimental work. The absolute calibration of this backscatter in terms of an effective Lambertian reflectance is less precise, but the data support values near nadir of approximately 0.20 for low wind speeds. It is noted that these values are 1 order of magnitude larger than the Fresnel reflectance for an air/water discontinuity in the refractive index. Whereas the normalized standard deviation (modulation factor) of backscatter is less well understood analytically, it is defined by these measurements to range from a few percent to over 50 percent at nadir and to increase off nadir as the tangent of theta or faster. The data are uncertain beyond 15 deg off nadir owing to a dynamic range limitation.

Bufton, J. L.↗
NASA NTRS1989

Finite element formulations for compressible flows

Researchers started their studies on the development and application of computational methods for compressible flows. Particular attention was given to proper numerical treatment of sharp layers occurring in such problems and to general mesh generation capabilities for intricate computational geometries. Mainly finite element methods enhanced with several state-of-the art techniques (such as the streamline-upwind/Petrov-Galerkin, discontinuity capturing, adaptive implicit-explicit, and trouped element-by-element approximate factorization schemes) were employed.

Tezduyar, Tayfun E.↗
NASA NTRS2014

Timing and Flux Evolution of the Galactic Center Magnetar SGR J1745-2900

We present the X-ray timing and spectral evolution of the Galactic Center magnetar SGR J1745-2900 (SGR*) for the first 4 months post-discovery using data obtained with the Nuclear Spectroscopic Telescope Array (NuSTAR) and Swift observatories. Our timing analysis reveals a large increase in the magnetar spin-down rate by a factor of 2.6 plus or minus 0.07 over our data span. We further show that the change in spin evolution was likely coincident with a bright X-ray burst observed in 2013 June by Swift, and if so, there was no accompanying discontinuity in the frequency. We find that the source 3 to 10 kiloelectronvolt flux has declined monotonically by a factor of approximately 2 over an 80-day period post-outburst accompanied by an approximately 20 percent decrease in the source's blackbody temperature, although there is evidence for both flux and kiloteslas having leveled off. We argue that the torque variations are likely to be magnetospheric in nature and will dominate over any dynamical signatures of orbital motion around Sgr A*.

Stars: magnetic field↗
NASA NTRS2023

Assessment of the Impact of Discontinuity in Satellite Instruments and Retrievals on Global PM2.5

Exposure to fine particulate matter (PM2.5) is the leading environmental risk factor for mortality globally. Satellite-derived estimates of surface PM2.5 developed from a combination of satellites, simulations, and ground monitor data are relied upon for health impact studies. The ability to develop satellite-derived PM2.5 estimates requires the continued availability of aerosol optical depth (AOD) sources. This work examines the impact of the addition or loss of satellite AOD data sources on global PM2.5 estimation and the impact of continuing the longterm record with AOD from the Visible Infrared Imaging Radiometer Suite (VIIRS) on the Suomi-National Polar orbiting Partnership (S-NPP) satellite after the loss of the MODIS (MODerate resolution Imaging Spectroradiometer) and MISR (Multi-angle Imaging Spectroradiometer) instruments on board the Terra and Aqua satellites. We find that the addition of VIIRS S-NPP AOD products to geophysical PM2.5 estimates from satellites and simulations causes regional differences that correspond to differences in the VIIRS and MODIS Deep Blue AOD algorithms and sampling. Changes in long-term trends and timeseries due to the addition or loss of AOD data sources are generally within their uncertainties. Statistical fusion with ground monitor data partially corrects for changes due to sampling differences when introducing the VIIRS AOD products, but uncertainty remains over desert regions where ground monitor coverage is sparse. This work provides promise for the sustained development of global satellite-derived PM2.5 estimates, despite discontinuities in instruments and retrieval methods.

Remote sensing↗
NASA NTRS1986

Corrosion pitting of SiC by molten salts

The corrosion of SiC by thin films of Na2CO3 and Na2SO4 at 1000 C is characterized by a severe pitting attack of the SiC substrate. A range of different Si and SiC substrates were examined to isolate the factors critical to pitting. Two types of pitting attack are identified: attack at structural discontinuities and a crater-like attack. The crater-like pits are correlated with bubble formation during oxidation of the SiC. It appears that bubbles create unprotected regions, which are susceptible to enhanced attack and, hence, pit formation.

Jacobson, N. S.↗
NASA NTRS1999

Variable Spin-Down in the Soft Gamma Repeater SGR 1900+14 and Correlations with Burst Activity

We have analyzed Rossi X-ray Timing Explorer Proportional Counter Array observations of the pulsed emission from SGR 1900+ 14 during 1996 September, 1998 June-October, and early 1999. Using these measurements and results reported elsewhere, we construct a period history of this source for 2.5 yr. We find significant deviations from a steady spin-down trend during quiescence and the burst active interval. Burst and Transient Source Experiment observations of the burst emission are presented and correlations between the burst activity and spin-down rate of SGR 1900+14 are discussed. We find an 80 day interval during the summer of 1998 when the average spin-down rate is larger than the rate elsewhere by a factor approximately 2.3. This enhanced spin-down may be the result of a discontinuous spin-down event or "braking glitch" at the time of the giant flare on 1998 August 27. Furthermore, we find a large discrepancy between the pulsar period and average spin-down rate in X-rays as compared to radio observations for 1998 December and 1999 January.

Woods, Peter M.↗
NASA NTRS1988

Investigation of stress concentration factor - Stress intensity factor interaction for flaws in filleted rods

To predict the fatigue life of machine parts which contain flaws in regions of stress concentration, the engineer needs to treat a series of crack sizes and/or shapes quickly and economically. In this paper the stress intensity factor distributions for circular surface flaws in the roots of fillets in rods loaded by remote tension are presented and examined. The examination reveals insight into the interaction of cracks with other stress concentrating discontinuities, and based on this it is suggested that weight function methods used in conjunction with known crack solutions may provide needed, efficient stress intensity factor prediction methods for such three-dimensional geometries.

Springfield, C. W., Jr.↗
NASA NTRS1999

Variable Spin-Down in the Soft Gamma Repeater SGR 1900+14 and Correlations with Burst Activity

We have analyzed Rossi X-ray Timing Explorer Proportional Counter Array observation of the pulsed emission from SGR 1900+14 during September 1996, June-October 1998, and early 1999. Using these measurements and results reported elsewhere. we construct a period history of this source for 2.5 years. We find significant deviations from a steady spin-down trend during quiescence and the burst active interval. Burst And Transient Source Experiment (BATSE) observations of the burst emission are presented and correlations between the burst activity and spin-down rate of SGR 1900 + 14 are discussed. We find an 80 day interval during the summer of 1998 when the average spin-down rate is larger than the rate elsewhere by a factor of about 2.3. This enhanced spin-down may, be the result of a discontinuous spin-down event or "braking glitch" at the time of the giant flare on 27 August 1998. Furthermore find a large discrepancy between the pulsar period and average spin-down rate in X-rays as compared to radio observation for December 1998 and January 1999.

Woods, Peter M.↗
NASA NTRS1994

Impact of land-surface moisture variability on local shallow convective cumulus and precipitation in large-scale models

Numerical experiments using state-of-the-art high-resolution mesoscale cloud model showed that land-surface moisture significantly affects the timing of onset of clouds and the intensity and distribution of precipitation. In general, landscape discontinuity enhances shallow convective precipitation. Two mechanisms that are strongly modulated by land-surface moisture-namely, random turbulent thermal cells and organized sea-breeze-like mesoscale circulations-also determine the horizontal distribution of maximum precipitation. However, interactions between shallow cumulus and land-surface moisture are highly nonlinear and complicated by different factors, such as atmospheric thermodynamic structure and large-scale background wind. This analysis also showed that land-surface moisture discontinuities seem to play a more important role in a relatively dry atmsophere, and that the strongest precipitation is produced by a wavelength of land-surface forcing equivalent to the local Rossby radius of deformation. A general trend between the maximum precipitation and the normalized maximum latent heat flux was identified. In general, large values of mesoscale latent heat flux imply strongly developed mesoscale circulations and intense cloud activity, accompanied by large surface latent heat fluxes that transport more water vapor into the atmosphere.

Chen, Fei↗
NASA NTRS1972

An analysis of Pioneer 9 low-frequency wave observations near interplanetary discontinuities.

Observation of an unusually complex sector boundary on Feb. 2, 1969. Within a single seven-hour period the Pioneer 9 magnetometer and plasma probe detected a reverse shock, a slow shock, and a conventional fast shock. During this interval the electron gyrofrequency and the ion plasma frequency each varied by more than a factor of 10, and the low-frequency (broadband and 400-Hz) electric field wave levels were high and variable. It is shown that, near the discontinuities, enhanced 400-Hz wave levels were not generally associated with field gradients or current layers, but elevated 400-Hz wave levels were detected when the ion density fell within a fairly well-defined window. This suggests that modes related to ion sound waves were detected, and the observations are assessed in terms of various theories for interplanetary wave generation.

Scarf, F. L.↗
NASA NTRS1999

Non-Intrusive Impedance-Based Cable Tester

A non-intrusive electrical cable tester determines the nature and location of a discontinuity in a cable through application of an oscillating signal to one end of the cable. The frequency of the oscillating signal is varied in increments until a minimum, close to zero voltage is measured at a signal injection point which is indicative of a minimum impedance at that point. The frequency of the test signal at which the minimum impedance occurs is then employed to determine the distance to the discontinuity by employing a formula which relates this distance to the signal frequency and the velocity factor of the cable. A numerically controlled oscillator is provided to generate the oscillating signal, and a microcontroller automatically controls operation of the cable tester to make the desired measurements and display the results. The device is contained in a portable housing which may be hand held to facilitate convenient use of the device in difficult to access locations.

Medelius, Pedro J.↗
NASA NTRS1976

Crystallization history of lunar picritic basalt sample 12002 - Phase-equilibria and cooling-rate studies

Experimental crystallization of a lunar picrite composition (sample 12002) at controlled linear cooling rates produces systematic changes in the temperature at which crystalline phases appear, in the texture, and in crystal morphology as a function of cooling rate. Phases crystallize in the order olivine, chromium spinel, pyroxene, plagioclase, and ilmenite during equilibrium crystallization, but ilmenite and plagioclase reverse their order of appearance and silica crystallizes in the groundmass during controlled cooling experiments. The partition of iron and magnesium between olivine and liquid is independent of cooling rate, temperature, and pressure. Comparison of the olivine nucleation densities in the lunar sample and in the experiments indicates that the sample began cooling at about 1 deg C/hr. Pyroxene size, chemistry, and growth instability spacings, as well as groundmass coarseness, all suggest that the cooling rate subsequently decreased by as much as a factor of 10 or more. The porphyritic texture of this sample, then, is produced at a decreasing, rather than a discontinuously increasing, cooling rate.

Walker, D.↗
NASA NTRS1984

Crack problems for bonded nonhomogeneous materials under antiplane shear loading

The singular nature of the crack tip stress field in a nonhomogeneous medium with a shear modulus with a discontinuous derivative was investigated. The simplest possible loading and geometry, the antiplane shear loading of two bonded half spaces in which the crack is perpendicular to the interface is considered. It is shown that the square root singularity of the crack tip stress field is unaffected by the discontinuity in the derivative of the shear modulus. The problem is solved for a finite crack and results for the stress intensity factors are presented.

Erdogan, F.↗
NASA NTRS2002

A Method of Efficient Inclination Changes for Low-thrust Spacecraft

The evolution of low-thrust propulsion technologies has reached a point where such systems have become an economical option for many space missions. The development of efficient, low trip time control laws has received an increasing amount of attention in recent years, though few studies have examined the subject of inclination changing maneuvers in detail. A method for performing economical inclination changes through the use of an efficiency factor is derived front Lagrange's planetary equations. The efficiency factor can be used to regulate propellant expenditure at the expense of trip time. Such a method can be used for discontinuous-thrust transfers that offer reduced propellant masses and trip-times in comparison to continuous thrust transfers, while utilizing thrusters that operate at a lower specific impulse. Performance comparisons of transfers utilizing this approach with continuous-thrust transfers are generated through trajectory simulation and are presented in this paper.

Falck, Robert↗
NASA NTRS1999

Numerical System Solver Developed for the National Cycle Program

As part of the National Cycle Program (NCP), a powerful new numerical solver has been developed to support the simulation of aeropropulsion systems. This software uses a hierarchical object-oriented design. It can provide steady-state and time-dependent solutions to nonlinear and even discontinuous problems typically encountered when aircraft and spacecraft propulsion systems are simulated. It also can handle constrained solutions, in which one or more factors may limit the behavior of the engine system. Timedependent simulation capabilities include adaptive time-stepping and synchronization with digital control elements. The NCP solver is playing an important role in making the NCP a flexible, powerful, and reliable simulation package.

Binder, Michael P.↗