SEARCH · Search NASA

Results for “Dislocation core”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Phase field modeling of dislocations and obstacles in InSb

We present a phase-field dislocation dynamics (PFDD) model informed by first-principle calculations to elucidate the competitive dislocation nucleation and propagation between the glide and shuffle sets in InSb diamond cubic crystal. The calculations are directly informed with generalized stacking fault energy curves on the (111) slip plane for both the “glide set,” with the smaller interplanar spacing, and the “shuffle set,” with the larger interplanar spacing. The formulation also includes elastic anisotropy and the gradient term associated with the dislocation core. The PFDD calculations show that under no stress the equilibrium structure of screw glide set dislocations dissociates into Shockley partials, while those of the shuffle set dislocations do not dissociate, remaining compact. The calculated dislocation core widths of these InSb dislocations agree well with the measured values for other semiconductor materials, such as Si and GaN. We find that a shuffle set dislocation emits from a dislocation source at an applied stress about three times smaller than that needed to emit leading and trailing partials successively on the glide set plane. Once the partial dislocations in the glide set are emitted, they propagate faster than the shuffle set perfect dislocation at the same stress level.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Cepstral scanning transmission electron microscopy imaging of severe lattice distortions

The development of four-dimensional (4D) scanning transmission electron microscopy (STEM) using fast detectors has opened-up new avenues for addressing some of longstanding challenges in electron imaging. One of these challenges is how to image severely distorted crystal lattices, such as at a dislocation core. Here we develop a new 4D-STEM technique, called Cepstral STEM, for imaging disordered crystals using electron diffuse scattering. In contrast to analysis based on Bragg diffraction, which measures the average and periodic scattering potential, electron diffuse scattering can detect fluctuations caused by crystal disorder. Local fluctuations of diffuse scattering are captured by scanning electron nanodiffraction (SEND) using a coherent probe. The harmonic signals in electron diffuse scattering are detected through Cepstral analysis and used for imaging. By integrating Cepstral analysis with 4D-STEM, we demonstrate that information about the distortive part of electron scattering potential can be separated and imaged at nm spatial resolution. Here, we apply the technique to the analysis of a dislocation core in SiGe and lattice distortions in a high entropy alloy.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Computational design of passivants for CdTe grain boundaries

CdTe is the second most-widely deployed photovoltaic (PV) material due to its high efficiency and low manufacturing costs. Currently, polycrystalline CdTe (poly-CdTe) has a record efficiency of similar to 22%, which is still well below the theoretical limit (similar to 30%). Polycrystalline CdTe films that have incorporated Cl or Se show higher efficiency, possibly due to the segregation of these ions to the grain boundaries (GBs), where they may passivate the dangling bonds. However, the efficiency enhancement mechanisms of passivants in CdTe GBs, and the feasibility of employing alternative passivants, have not been well explored. Here, we present a systematic computational study of CdTe GBs with potential passivants, namely S, P, As, Se, and Sb on Te sites, and Na, Mg, Al, Sc, Cu, and Zn on Cd sites. Density functional theory (DFT) calculations were performed on GB dislocation core structures derived from scanning transmission electron microscopy (STEM) images of a model GB (bicrystal). We computed the segregation thermodynamics, electronic density of states, and charge variations near doped CdTe GBs. We find that segregation of impurities to GBs is thermodynamically favorable. For a Te-terminated core, Se, S, and P on Te sites effectively reduce midgap states. For both Cd-and Te-terminated dislocation cores, Sc and Al reduce midgap states when substituted for Cd atoms. Overall, the greatest improvement was achieved with co-doping, i.e. simultaneously substituting Te with Se and substituting Cd with Cu or Al. The elimination of midgap states is predicted to increase the photovoltaic efficiency of CdTe by reducing the recombination at grain boundaries.

14 SOLAR ENERGY↗

DOE OSTI2025

Exploring the relation between transonic dislocation glide and stacking fault width in FCC metals

Theory predicts limiting gliding velocities that dislocations cannot overcome. Computational and recent experiments have shown that these limiting velocities are soft barriers and dislocations can reach transonic speeds in high rate plastic deformation scenarios. In this paper we systematically examine the mobility of edge and screw dislocations in several face centered cubic (FCC) metals (Al, Au, Pt, and Ni) in the extreme large-applied-stress regime using molecular dynamics simulations. Our results show that edge dislocations are more likely to move at transonic velocities due to their high mobility and lower limiting velocity than screw dislocations. Importantly, among the considered FCC metals, the dislocation core structure determines the dislocation’s ability to reach transonic velocities. This is likely due to the variation in stacking fault width due to relativistic effects near the limiting velocities.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Integral X-ray diffuse scattering for studying irradiation-induced dislocation loops in single crystals

Numerical diffuse scattering cross-section calculations are used to establish a rigorous basis for determining the concentration and size distribution of dislocation loops in irradiated single crystals from integral X-ray diffuse scattering (XRDS) measurements. Differential XRDS intensities for prismatic {111} type dislocation loops are numerically calculated as a function of loop radius R and wavevectors q relative to Bragg reflections in tungsten. The results show the well known 1/q 2 Huang scattering form at small q that transitions to a ∼1/q 4 dependence associated with the Stokes–Wilson approximation for q ≳ 1/R. More importantly, they show further that the 1/q 4 falloff is not the asymptotic large-q form of the diffuse scattering for small loops (R < 200 Å) as has often been assumed. Rather, for loop sizes as small as R ≃ 5 Å with strong curvature, the calculations show definitively that the scattering transitions to a robust 1/q 5 falloff at larger q that arises due to the local strains near the dislocation core defining the circumference of the dislocation loops. The presence of this 1/q 5 asymptotic form for both small and large loops is experimentally confirmed using an integral XRDS measurement around the 110 reflection on self-ion-irradiated tungsten combined with numerically calculated integral XRDS cross-sections. Accordingly, the historical two-region theoretical treatment of the cross-sections for integral XRDS is extended to a three-region model that has direct sensitivity to the (first-moment) dislocation line lengths of dislocation loops. In conclusion, these developments enable the use of both numerical and analytically modeled cross-sections to make accurate integral XRDS determinations of dislocation loop sizes and concentrations using modest-intensity laboratory X-ray sources.

42 ENGINEERING↗

DOE OSTI2023

An interplay between a hydrogen atmosphere and dislocation characteristics in BCC Fe from time-averaged molecular dynamics

The interplay between hydrogen and dislocations (e.g., core and elastic energies, and dislocation–dislocation interactions) has implications on hydrogen embrittlement but is poorly understood. Continuum models of hydrogen enhanced local plasticity have not considered the effect of hydrogen on dislocation core energies. Energy minimization atomistic simulations can only resolve dislocation core energies in hydrogen-free systems because hydrogen motion is omitted so hydrogen atmosphere formation can’t occur. Additionally, previous studies focused more on face-centered-cubic than body-centered-cubic metals. Discrete dislocation dynamics studies of hydrogen–dislocation interactions assume isotropic elasticity, but the validity of this assumption isn’t understood. Here, we perform time-averaged molecular dynamics simulations to study the effect of hydrogen on dislocation energies in body-centered-cubic iron for several dislocation character angles. We see atmosphere formation and highly converged dislocation energies. We find that hydrogen reduces dislocation core energies but can increase or decrease elastic energies of isolated dislocations and dislocation–dislocation interaction energies depending on character angle. We also find that isotropic elasticity can be well fitted to dislocation energies obtained from simulations if the isotropic elastic constants are not constrained to their anisotropic counterparts. These results are relevant to ongoing efforts in understanding hydrogen embrittlement and provide a foundation for future work in this field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Phase field dislocation dynamics (PFDD) modeling of non-Schmid behavior in BCC metals informed by atomistic simulations

Body-Centered Cubic (BCC) metals exhibit anomalous mechanical properties such as twinning/anti-twinning and tension/compression asymmetry, which are attributed to asymmetric behavior of screw dislocations. Unlike Face-Centered Cubic (FCC) metals, the Critical Resolved Shear Stress (CRSS) of BCC metals deviates from the Schmid law. Here, we use a mesoscale modeling approach called Phase Field Dislocation Dynamics (PFDD) to understand the critical factors that control this non-Schmid behavior and reproduce atomistic predictions of the CRSS (Peierls stress). All inputs to the PFDD model are obtained from Molecular Statics (MS) simulations. Multiple pathways for modeling the non-Schmid behavior are investigated by incorporating the representative dislocation properties into different energy terms in the PFDD model. One way to understand non-Schmid behavior is to incorporate stress components projected on inclined planes into the external energy term within PFDD. Alternatively, we propose that non-Schmid behavior can also be accounted for by considering the variation of the {110} unstable stacking fault energy and the dislocation core width as a function of the applied tensorial stress field. The CRSS predicted using PFDD modeling is in excellent agreement with MS predictions.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Unfaulting mechanisms of interstitial Frank loops in fluorite-structured ThO 2

Unfaulting of Frank loops in irradiated fluorite-structured oxides is of significance for understanding microstructural evolution. However, the mechanisms have not yet been directly observed. To this end, we utilize molecular dynamics to reveal the atomistic details related to the unfaulting process of interstitial Frank loops in ThO 2 , which involve a single pair or multiple pairs of co-propagating Shockley partials to annihilate the stacking faults. Here, we find that the unfaulting is achieved via a synchronous shear of the partial pairs to remove the extrinsic stacking fault in the cation sublattice and the intrinsic stacking fault in the anion sublattice. The high mobility of oxygen at the dislocation core may reduce the activation barriers of dislocation nucleation and migration. These findings provide a fundamental understanding of the transformation of faulted loops in irradiated ThO 2 , and could be transferable to other fluorite-structured oxides.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Electro and electro-photo plasticity of CdZnTeSe and CdZnTe

In this work, we studied the influence of applied bias on of the Vickers microhardness HV 0.025 of CdZnTeSe and CdZnTe semi-insulating samples without and with the illumination of light at 870 nm. We observed that a small applied bias results in the hardening of the material. The effect is strongest at a bias of ± 0.5 V and is further strengthened by additional illumination. We suggest that the observed positive electro and electro-photo plastic effects in CdZnTeSe and CdZnTe can be explained by an increase in the concentration of free electrons and holes injected from contacts in a biased sample or generated by illumination. These free carriers can be trapped at dislocations and induce a reconstruction of bonds at the dislocation core. The necessity to break the bonds before dislocation glide results in an increase of microhardness.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Interplay between hydrogen, temperature, and character angle on dissociated dislocation energies in Fe–Ni–Cr austenitic stainless steels

Dislocation energy has an important role in the mechanical performance of structural metals. While dislocation energies cannot be fully obtained from continuum theories due to the contribution of the dislocation core, they have been calculated via atomistic simulations in elemental metals. However, constraints on the local atomic environments have prevented the use of such approaches in systems that incorporate alloying or interstitial solutes. In this work, we develop robust molecular dynamics methods to resolve these issues through a geometric construction of dislocation dipoles and the calculation of time-averaged energies. Furthermore, we apply these methods to calculate dislocation energies (including core energies) in an Fe 70 Ni 11 Cr 19 austenitic steel at a variety of character angles, hydrogen concentrations, temperatures, and dipole spacings. The resulting highly converged energies show an excellent agreement with continuum expressions. Overall, hydrogen concentrations up to 1.0 % do not have a significant effect on the elastic parameters and dislocation energy. The methods and insights derived in this work have the potential to facilitate the calculation of dislocation energies in a wide range of systems, and to guide our understanding of hydrogen embrittlement.

Alloyed systems↗

DOE OSTI2024

Structure and migration of heavily irradiated grain boundaries and dislocations in Ni in the athermal limit

The microstructural evolution at and near preexisting grain boundaries (GBs) and dislocations in materials under high radiation doses is still poorly understood. In this work, we use the creation relaxation algorithm (CRA) developed for atomistic modeling of high-dose irradiation in bulk materials to probe the athermal limit of saturation of GB and dislocation core regions under irradiation in fcc Ni. We find that, upon continuously subjecting a single dislocation or GB to Frenkel pair creation in the athermal limit, a local steady-state disordered defect structure is reached with excess properties that fluctuate around constant values. Case studies are given for a straight screw dislocation which elongates into a helix under irradiation and several types of low- and high-angle GBs, which exhibit coupled responses such as absorption of extrinsic dislocations, roughening, and migration. A positive correlation is found between the initial GB energy and the local steady-state GB energy under irradiation across a wide variety of GB types. Metastable GB structures with similar density in the defect core region but different initial configurations are found to converge to the same limiting structure under CRA. The mechanical responses of pristine and irradiated dislocations and GB structures are compared under an applied shear stress. Irradiated screw and edge dislocations are found to exhibit a hardening response, migrating at larger flow stresses than their pristine counterparts. Mobile GBs are found to exhibit softening or hardening responses depending on GB character. Although some GBs recover their initial pristine structures upon migration outside of the radiation zone, many GBs sustain different flow stresses corresponding to altered mobile core structures.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Multiscale Concurrent Atomistic-Continuum (CAC) modeling of multicomponent alloys

We report strengthening in complex multicomponent systems such as solid solution alloys is controlled primarily by the dynamic interactions between dislocation lines and heterogeneously distributed solute species. Modeling of extended defect length scales in such multicomponent systems becomes prohibitively expensive, motivating the development of reduced order approaches. This work explores the application of the Concurrent Atomistic-Continuum (CAC) method to model dislocation mobility in random alloys at extended length scales. By employing recently developed average-atom interatomic potentials, the average “bulk” material response in coarse-grained regions interacts with true random solute species in the atomistic-scale domain. We demonstrate that spurious stresses in domain resolution transition regions are eliminated entirely due to the CAC formulation. Simultaneously, the key details of local stress fluctuation due to randomness in the dislocation core region are captured, and fluctuating stress smoothly decays to the long-range dislocation stress field response. Dislocation mobility calculations, for line lengths over 400 nm, are computed as a function of alloy composition in the model FeNiCr system and compared to full molecular dynamics (MD). The results capture the composition-dependent trends, while reducing degrees of freedom by nearly 40%. This approach can be readily extended to any system described by an EAM potential and facilitates the study of large-scale defect dynamics in complex solute environments to support computational alloy design.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Using lifetime of point defects for dislocation bias in bcc Fe

The interaction between dislocations and point defects is key to deformation processes and microstructural evolution of structural materials. In this work, we compute the lifetime of point defects to describe their interaction with dislocations. This approach can accurately account for the effects of the dislocation core and anisotropic defect dynamics to accumulatively determine the capture efficiency, sink strength, and dislocation bias at different temperatures and dislocation densities. Particularly, the absorption of point defects by straight screw and edge dislocations in a model bcc iron system is studied. The maximum swelling rates based on the obtained bias factors are in close agreement with a variety of experimental measurements, including both neutron and ion-irradiation data, especially when considering the survival fraction for point defects from displacement cascades. Further, this approach applies to many other processes and sinks, such as dislocation loops and interfaces, providing a powerful means to develop fundamental insights critical for improving radiation resistance and mechanical properties of structural materials through controlling defect interaction and evolution.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Direct Imaging of Hydrogen‐Driven Dislocation and Strain Field Evolution in a Stainless Steel Grain

Hydrogen embrittlement (HE) poses a significant challenge to the durability of materials used in hydrogen production and utilization. Disentangling the competing nanoscale mechanisms driving HE often relies on simulations and electron-transparent sample techniques, limiting experimental insights into hydrogen-induced dislocation behavior in bulk materials. This study employs in situ Bragg coherent X-ray diffraction imaging to track three-dimensional (3D) dislocation and strain field evolution during hydrogen charging in a bulk grain of austenitic 316 stainless steel. Tracking a single dislocation reveals hydrogen-enhanced mobility and relaxation, consistent with dislocation dynamics simulations. Subsequent observations reveal dislocation unpinning and climb processes, likely driven by osmotic forces. Additionally, nanoscale strain analysis around the dislocation core directly measures hydrogen-induced elastic shielding. These findings experimentally validate theoretical predictions and offer mechanistic insights into hydrogen-driven dislocation behavior. The quantified nanoscale phenomena serve as critical inputs for multiscale modeling frameworks to predict bulk material responses and accelerate the development of HE-resistant alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

On the origin of internal obstacles to dislocation glide in single-phase NiFe random alloys

Over the past decade, a new class of unconventional alloys, where several constitutive elements are presented in close to equal concentrations, is considered as promising structural materials in many applications. Properties and behavior of many concentrated solid solution alloys (CSSAs) under different conditions, including mechanical loading, differs from that of conventional alloys and has been the subject of intensive studies by different techniques. A key feature of these materials is that there is no clear distinction between solute and solvent species of atoms, which is the conventional approach to considering dislocation motion in alloys. To understand this regime, we have recently reported on the glide of a screw dislocation glide in a simple equiatomic NiFe alloy and reported the two-mode character. At low applied stress, the dislocation motion is similar to a glide through a field of obstacles. In this work, we report the results of a detailed study on the nature of these internal obstacles. We demonstrate that these are not conventional localized “obstacles” but is the result of significantly different energies of instantaneous dislocation configurations over the alloy bulk. The strong pinning positions are associated with composition changes in the partial dislocation cores, while observing no significant composition changes along the stacking faults. Local energies can vary significantly, as demonstrated using simulations of short-periodicity dislocation lines. Therefore, the critical stress to move a dislocation under such conditions is not a constant Peierls stress but represents a wide spectrum of barriers between different non-straight valleys that the dislocation line accommodates in the bulk at particular stress/strain conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Molecular dynamics simulations of radiation cascade evolution near cellular dislocation structures in additively manufactured stainless steels

The dislocation dense cellular structures observed in additively manufactured (AM) stainless steels can allow these materials to have enhanced strength and ductility compared to conventionally manufactured materials. Effective design of radiation resistant materials often necessitates creating microstructures containing of a high density of dislocations that act as sinks for radiation induced defects. This work uses molecular dynamics simulations to study the impact of pre-existing defects on radiation damage in stainless steel 316L fabricated by the laser powder bed fusion process. The evolution of synthetically generated dislocations in a crystal system in response to multiple radiation collision cascades suggest that dislocation dense regions reduce the probability of surviving point defects forming clusters. This finding seems to result from the dislocation cores’ ability to absorb point defects, thereby limiting the formation of clusters during the recombination phase. However, after successive cascades, the ability of the dislocation entanglement to prevent defect formation is diminished and defect cluster formation trends to an equilibrium. Accordingly, it is hypothesized that in an experimental setting the dislocation cells will initially act as neutral sinks for point defects, potentially delaying the onset of radiation damage effects; but, these structures will be degraded due to radiation-enhanced diffusion and lose their effectiveness at doses above 1.5–2 displacements per atom. Nevertheless, the ability to produce complex and feature-specific microstructures suggests promise for the design of radiation tolerant materials using AM methods.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Effect of varying threading dislocation densities on the optical properties of InGaN/GaN quantum wells with intentionally created V-shaped pits

The effect of varying threading dislocation densities on the internal quantum efficiencies (IQEs) of InGaN quantum wells (QWs), with and without intentionally created “V-pits,” is reported here. InGaN QW samples grown on GaN-on-sapphire templates with threading dislocation densities of <1 × 108 and <1 × 109 cm−2 are compared, with and without GaN/InGaN superlattice (SL) layers incorporated to intentionally open up the threading dislocation cores and form large-size “V-pits.” The formation of “V-pits” is confirmed by cross-sectional transmission electron microscopy to initiate from threading dislocations in the SL layers. The densities of the pits are confirmed by plan-view SEM to agree with the substrate threading dislocation densities. The experimental room temperature IQEs of the “V-pit” QW samples are enhanced to 15% ± 1% compared to 6% ± 2% for conventional QW samples. Both conventional and “V-pit” samples show insensitivity to the magnitude of the dislocation densities with respect to IQE performance, while the “V-pit” samples show shifts in the peak emission wavelengths compared to the conventional samples, attributed to strain modulation. This study provides additional understanding of the causes of the observed insensitivity of the IQEs to different threading dislocation densities.

Engineering↗

DOE OSTI2022

Resonant interaction between phonons and PbTe/PbSe (001) misfit dislocation networks

Here this work aims at a quantitative and mechanistic understanding of the dynamic process of the phonon-dislocation interaction in PbTe/PbSe (001) heterostructures using the Concurrent Atomistic-Continuum (CAC) method as the simulation tool. The misfit dislocation network and the atomic-scale dislocation core structure obtained in the simulations are found to agree reasonably well with the experimental observations of the PbTe/PbSe (001) interface. Through visualizing the dynamic interaction between phonons and dislocations, as well as quantifying the dislocation vibration amplitude, the phonon energy transmission, and the thermal resistance of the misfit interfaces, this work has illustrated and quantified two mechanisms for phonon-dislocation interaction: (1) phonon scattering by the strain field of dislocations, and (2) phonon scattering by dislocations that vibrate via the local modes of a dislocation network; the latter, leads to resonant phonon-dislocation interaction, which is manifested as local maxima of out-of-phase vibration of the atoms on the two sides of the slip plane, leading to local minima of the energy transmission in the heterostructure that contains one interface. The local vibrational modes are found to be excited only by shear stress induced by transverse phonons. Among various resonant modes, the one with the lowest frequency has the strongest effect. This work has also demonstrated the collective motion of dislocations under ultrafast phonon pulses. In addition, the dynamic properties of the misfit dislocation network localized within one interface are found to be significantly altered by the presence of misfit dislocations at other interfaces, thus further confirming the cooperative dynamic nature of the motion of dislocations and phonons.

36 MATERIALS SCIENCE↗