Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Exploring the relation between transonic dislocation glide and stacking fault width in FCC metals

Theory predicts limiting gliding velocities that dislocations cannot overcome. Computational and recent experiments have shown that these limiting velocities are soft barriers and dislocations can reach transonic speeds in high rate plastic deformation scenarios. In this paper we systematically examine the mobility of edge and screw dislocations in several face centered cubic (FCC) metals (Al, Au, Pt, and Ni) in the extreme large-applied-stress regime using molecular dynamics simulations. Our results show that edge dislocations are more likely to move at transonic velocities due to their high mobility and lower limiting velocity than screw dislocations. Importantly, among the considered FCC metals, the dislocation core structure determines the dislocation’s ability to reach transonic velocities. This is likely due to the variation in stacking fault width due to relativistic effects near the limiting velocities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interplay between hydrogen, temperature, and character angle on dissociated dislocation energies in Fe–Ni–Cr austenitic stainless steels

Dislocation energy has an important role in the mechanical performance of structural metals. While dislocation energies cannot be fully obtained from continuum theories due to the contribution of the dislocation core, they have been calculated via atomistic simulations in elemental metals. However, constraints on the local atomic environments have prevented the use of such approaches in systems that incorporate alloying or interstitial solutes. In this work, we develop robust molecular dynamics methods to resolve these issues through a geometric construction of dislocation dipoles and the calculation of time-averaged energies. Furthermore, we apply these methods to calculate dislocation energies (including core energies) in an Fe 70 Ni 11 Cr 19 austenitic steel at a variety of character angles, hydrogen concentrations, temperatures, and dipole spacings. The resulting highly converged energies show an excellent agreement with continuum expressions. Overall, hydrogen concentrations up to 1.0 % do not have a significant effect on the elastic parameters and dislocation energy. The methods and insights derived in this work have the potential to facilitate the calculation of dislocation energies in a wide range of systems, and to guide our understanding of hydrogen embrittlement.

Alloyed systems↗
DOE OSTI2025

Effects of HCP/BCC element ratios on the room-temperature tensile properties of Ti-Zr-Hf-Nb-Ta refractory high-entropy alloys

Equiatomic and non-equiatomic Ti-Zr-Hf-Nb-Ta refractory high-entropy alloys (RHEAs) were arc melted, homogenized, cold rolled, and recrystallized to produce single-phase, body-centered cubic (BCC), microstructures with weak texture and equiaxed grains 76–199 μm in size. Here, the non-equiatomic alloys had either a 60:40 or 80:20 atomic ratio of hexagonal close-packed (HCP) elements (Ti + Zr + Hf) to BCC elements (Nb + Ta). Alloy compositions were measured after thermomechanical processing to determine the concentrations of the major (substitutional) and minor (interstitial) elements. We investigated how elastic constants and uniaxial tensile properties were affected by changes in the relative concentrations of the constituent elements at fixed HCP:BCC ratios. Yield strengths ranged from 801 to 922 MPa and ultimate tensile strengths from 815 to 933 MPa. Good agreement is obtained between the experimental yield strengths and those predicted by a strength theory based on edge dislocations indicating that the observed compositional effects are due to their effects on shear modulus and volume misfit. Fracture occurred by dimpled rupture with fracture strains of 19.4%–25.7%, but uniform strains were an order of magnitude lower at 1.1%–3.2%, calling into question the useable ductility (prior to necking) of RHEAs considered to be ductile based on their fracture strain. Contrary to predictions in the literature that HCP elements promote ductility, our present results show that increasing the HCP:BCC ratio decreases both the total strain and the uniform strain. Similar trends were not evident in the yield or ultimate strengths; rather, strengths were affected mainly by shear modulus and volume misfit.

BCC high-entropy alloys↗
DOE OSTI2026

Machine learning guided prediction of solute segregation at coherent and semi-coherent metal/oxide interfaces

Investigation of semi-coherent metal/oxide interfaces with misfit dislocations using density functional theory (DFT) is computationally intensive to the point of being prohibitive, as it involves several hundreds to many thousands of atoms. In this study, we examined the solute segregation behavior at the Fe/Y 2 O 3 interface—a model interface for cladding applications in nuclear fission reactors—using a combination of DFT calculations and machine learning (ML) approaches. Both coherent and semi-coherent interfaces were considered. ML models were trained on DFT-calculated segregation energies to identify the key chemical, geometric and strain energy related features that govern solute segregation behavior at coherent Fe/Y 2 O 3 interfaces. Furthermore, it was found that ML models when trained on DFT calculated segregation energy of elements at a coherent interface, comprising of about a hundred-atom supercell, can predict the segregation energy of elements at a semi-coherent Fe/Y 2 O 3 interface (with multiple hundreds of atoms) at a fraction of computational cost (1/35th), with an accuracy comparable to DFT calculations.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Prediction of Solute Segregation at Metal/Oxide Interfaces Using Machine Learning Approaches

The atomic structure and chemistry at metal/oxide interfaces play a crucial role in determining their properties. However, studying semi-coherent metal/oxide interfaces that include misfit dislocations through density functional theory (DFT) is often computationally expensive due to the large number of atoms involved, ranging from hundreds to thousands. In this study, we explore solute segregation behavior at the Fe/Y 2 O 3 interface—an important model interface for cladding applications in nuclear fission reactors—by combining DFT calculations with a machine learning (ML) approach. ML models are trained using DFT-calculated segregation energies (𝐸 𝑆𝑒𝑔 ) to identify the key chemical and geometric factors influencing solute segregation at metal/oxide interfaces, revealing the competition between these features in determining 𝐸 𝑆𝑒𝑔 . Moreover, the segregation behavior at a specific Fe/Y 2 O 3 interface is predicted with high accuracy using ML models trained on data from this interface. Furthermore, it is found that the ML models could also predict solute segregation at a different Fe/Y 2 O 3 interface with a new orientation relationship (OR), at a computational cost of less than 1/45 of that required for similar DFT calculations.

36 - MATERIALS SCIENCE↗
NASA NTRS1976

On onsagers principle, dislocation motion and hydrogen embrittlement

Onsager's reciprocal relationships from the linear theory of irreversible thermodynamics are applied to hydrogen - dislocation interactions. Existing experimental evidence shows that dislocation motion causes localized hydrogen accumulation; thus, from the Onsager principle, localized hydrogen accumulations will affect dislocation motion and therefore the properties of metals and alloys exposed to hydrogen environments.

Louthan, M. R., Jr.↗
DOE OSTI2025

Anomalous thermal transport in Eshelby twisted van der Waals nanowires

Dislocations in van der Waals (vdW) layered nanomaterials induce strain and structural changes that substantially impact thermal transport. Understanding these effects could enable the manipulation of dislocations for improved thermoelectric and optoelectronic applications, but experimental insights remain limited. Here, in this study, we use synthetic Eshelby twisted vdW GeS nanowires (NWs) with single screw dislocations as a model system to explore the interplay between dislocation-induced structural modifications and lattice thermal conductivity. Our measurements reveal a monoclinic structure stabilized by the dislocation, leading to a substantial drop in thermal conductivity for larger-diameter NWs (70% at room temperature), supported by first-principles calculations. Interestingly, we also find an anomalous enhancement of thermal conductivity with decreasing diameter in twisted NWs, contrary to typical trends in non-twisted GeS NWs. This is attributed to increased conductivity near the NW cores due to compressive strain around the central dislocations, and aligns with a density-functional-theory-informed core–shell model. Our results highlight the critical role of dislocations in thermal conduction, providing fundamental insights for defect and strain engineering in advanced thermal applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Cross-slip and easy-glide CRSS in titanium: Theoretical predictions and in-situ TEM measurements

This study investigates the mechanics of prismatic and first-order pyramidal $\langle$a$\rangle$ slip in titanium (Ti), elucidating the physics of easy-glide and cross-slip through a combination of theory and experiments. Screw-character prismatic (Pr) dislocations in Ti are of particular interest because their complex cores can be stable or unstable, leading to activation by either cross-slip or planar glide. To investigate these mechanisms, site-specific micro tensile samples were prepared using focused ion beam (FIB) milling and mounted on a push-to-pull (PTP) device for in-situ transmission electron microscopy (TEM) tensile testing. The in-situ experiments provide direct observations of the onset of dislocation motion and the precise determination of the critical resolved shear stress (CRSS) for the activated mechanisms, and its evolution with load cycling. A comprehensive theory has been developed to predict the CRSS values for easy glide, cross-slip, and multiplication of dislocations. Predicted critical stresses for pyramidal (π)-to-Pr and reverse cross-slip agree closely with the experimental measurements. The latter cross-slip stress is a factor of two higher than that of unobstructed planar slip. The model accounts for overlapping dislocation cores and employs a Wigner-Seitz based cell to evaluate misfit energies. By combining ab initio density functional theory (DFT) with anisotropic elasticity, the framework identifies minimum energy pathways for dislocation glide, which can be intermittent and zig-zag. A simplified expression utilizing (π) and Pr Schmid factor ratios is proposed for critical stress corresponding to (π)-to-Pr cross-slip transition. The results are strongly dependent on crystal orientation, underscoring non-Schmid behavior. Overall, this study explores key critical stress parameters essential for informing higher-scale simulations of plasticity in Ti.

Critical stress↗
NASA NTRS1986

Fatigue crack propagation rate model based on a dislocation mechanism

It has been noted that the crack propagation exponent p for most metals usually varies between values of 2 and 4, and that the motion of dislocations plays an important part in determining the exponent p. Attention is presently given to the significance of the exponent p in terms of the motion of dislocations, in view of the theory of thermally activated plastic flow and the cumulative plastic strain concept for a failure criterion.

Mazumdar, P. K.↗
DOE OSTI2025

Chromium enhances the mechanical performance of 3d transition metal high entropy alloys

A comprehensive examination of the compositional effects on the deformation behavior of high entropy alloys (HEAs) was conducted through nanoindentation, indentation creep, and stress relaxation experiments at ambient temperature. The alloys investigated included NiCoFe, NiCoCr, NiCoCrFe, and NiCoCrFeMn, all of which underwent identical thermomechanical processing. From the experimental results, NiCoCr exhibited the highest maximum shear stress for dislocation nucleation (13 GPa) and nanoindentation hardness (3.8 GPa) among the alloys tested. It also showed the lowest stress sensitivity (0.02) and activation volume (3–4 b 3 ) under creep and stress relaxation conditions, indicative of its superior plastic flow properties. Density functional theory (DFT) calculations further revealed an uneven charge density and larger bonding-length variation in NiCoCr due to the presence of Cr, which increased lattice distortion, impeding dislocation movement. Furthermore, in this study, post-deformation microscopy using transmission electron microscopy (TEM) revealed a high density of stacking faults and twins in NiCoCr that effectively enhanced its creep strength. The results highlight the significance of specific elemental effects, particularly from Cr in this study, over configurational entropy effect (i.e., compositional complexity) in governing the deformation microstructure and mechanical properties of HEAs. Finally, these insights will be instrumental for the design and optimization of advanced alloys for load-bearing applications.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Decay of skeins of dislocations in cholesterics: rewiring Conway's tangles into necklaces of bangles

Knotted and linked skeins of vortices and disclinations generated, respectively, by symmetry-breaking normal → superfluid and isotropic → nematic phase transitions are known to untie, by rewiring of their crossings, into independent unknots that finally shrink and collapse until the defect-free ground state is reached. We demonstrate that the decay of skeins of dislocations, generated by the isotropic → cholesteric phase transition within a cylinder/cylinder gap, leads to stable necklace-like states made of numerous minimal loops, called bangles, tethered to kinks of much larger loops called cargo. We analyze the topological decay of skeins of dislocations in terms of the Conway–Kauffman theory of knots, showing that the necklace state results from rewiring of crossings triggered by collisions of tangles with their numerator closure. We point out that, in general, for symmetry reasons, kinks on edge dislocations are chiral. Their handedness, right or left, directly depends on the sign of kinks on which they are localized. In cholesterics with intrinsic chirality, the energy of kinks bearing bangles depends on their handedness. For this reason, within necklaces, all bangles are tethered to kinks of the same sign.

Lee, Jun-Yong [International Institute for Sustain↗
NASA NTRS1985

Damping and modulus measurements in B2 transition metal aluminides

The polycrystalline intermetallic alloys FeAl (50.9 to 58.2 percent Fe), NiAl (49.2 to 55.9 percent Ni) and CoAl (48.5 to 52.3 percent Co) have the B2 structure and are of interest for high temperature applications. The PUCOT (piezoelectric ultrasonic composite oscillator technique) has been used to measure mechanical damping or internal friction and Young's modulus has been used as a function of temperature and composition for these materials. The modulus data for six CoAl alloys at temperatures up to 1300 K are presented. Examples are given of the strain amplitude dependence of internal friction for four CoAl alloys. The curves showed the break away phenomenon and are interpreted in terms of a theory dealing with the pinning of dislocation lines and their eventual break away at large strain amplitudes. The dislocation density was calculated to be about 10 to the 8th per sq m. For all the compositions (X1) of CoAl studied, a single equation could be fitted to the data.

Harmouche, M. R.↗
DOE OSTI2025

A stress-sensitive precipitate nucleation model beyond classical nucleation theory

The dynamic evolution of precipitates and second phases dictates the strength and stability of most engineering alloys. By design, or as a consequence of thermo-mechanical aging, engineering metals and alloys often form precipitates of second phases when subjecting to diverse thermal and mechanical loads. Precipitation is governed by several factors, including the alloy’s composition, processing/operating temperature, and stresses — either as a result of external loads or from residual stresses. However, state-of-the-art models for precipitate nucleation (i.e., classical nucleation theory) typically lacks consistent method to capture the effects of externally applied and/or internal stresses on nucleation; thereby severely limiting the applicability of these models to complex materials systems and to representative loading scenarios. Here, in this work, we extend upon classical nucleation theory to account for the effect of stresses on precipitation kinetics and thermodynamics. This is achieved via the use of an Eshelbian micromechanics framework keeping track of (i) the stress build up resulting from second phase formation as a function of mechanical load and, (ii) the effects of dislocations on precipitate formation. This new model is applied to σ precipitate in Fe–Cr binary alloys and M 23 C 6 precipitate in 316H stainless steel (SS). Simulations demonstrate the important role of both the remotely applied loads and dislocation pile ups on precipitate nucleation.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Back stress in dislocation creep. Part 1: Basic concepts and measuring techniques

A theory is proposed whereby the plastic deformation of metal materials is determined by the difference between the applied stress and the back stress which characterizes the resistance of the material to plastic deformation. The back stress is usually equivalent to the internal stress or the friction stress and depends on the magnitude of the applied stress and temperature. The concept of back stress is applied to the case of the dislocation creep of precipitation-hardened or dispersion-strengthened metal materials. An additivity rule is formulated which can be useful in interpreting the creep behavior of such materials.

Cadek, J.↗
NASA NTRS1989

The high temperature deformation in cyclic loading of a single crystal nickel-base superalloy

The high temperature cyclic stress softening response of the single crystal nickel-base superalloy PWA 1480 was investigated. Specimens oriented near the 001- and 111-lines were tested at 1050 C in low-cycle fatigue and then microstructurally evaluated. The 001- and 111-line specimens had dissimilar flow behavior in monotonic tensile tests, but comparable softening in low-cycle fatigue. This softening was accompanied by rapid generation of dislocation networks at the gamma-gamma-prime interfaces and by a slower time-dependent coarsening of gamma-prime precipitates. Due to the rapid formation of a dislocation substructure at the gamma-gamma-prime interfaces, the cyclic stress softening could be modeled with an existing theory which related cyclic stress to the evolving microstructure and dislocation structure.

Gabb, T. P.↗
DOE OSTI2025

Measuring the Burgers vector of dislocations with dark-field X-ray microscopy

The subsurface dynamics of dislocations are essential to many properties of bulk crystalline materials. However, it is challenging to characterize a bulk crystal by conventional transmission electron microscopy (TEM) due to the limited penetration depth of electrons. A novel X-ray imaging technique – dark-field X-ray microscopy (DFXM) – was developed to image hierarchical dislocation structures in bulk crystals. While today's DFXM can effectively map the line structures of dislocations, it is still challenging to quantify the Burgers vectors, the key characterization governing the dislocation behaviors. Here, we extend the 'invisibility criterion' formalism from the TEM theory to the geometrical-optics model of DFXM and demonstrate the consistency between DFXM and dark-field TEM using multi-diffraction-peak imaging for a single edge dislocation. Due to the practical difficulty of multi-peak DFXM experiments, we further study how the Burgers vector effect is encoded for a single-peak DFXM experiment. Using the geometrical-optics DFXM simulation, we explore the asymmetry of rocking tilt scans at different rolling tilts and develop a new method to characterize the Burgers vector. The conclusions of this study advance our understanding of the use of DFXM in characterizing individual dislocations, enabling the connection from bulk DFXM imaging to dislocation mechanics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interface morphology and dislocation-mediated processes during rapid solidification of thin films

Rapid solidification experiments have, in recent years, revealed a wealth of new microstructural phenomena that suggest a strong connection between the kinetics of solidification and the crystalline structures that emerge as a result. In this work, we investigate the interplay between interface morphology and defect-mediated processes during rapid solidification conditions using a Phase Field Crystal (PFC) model, enabling us to simultaneously and efficiently explore the physics of solidification and elasto-plasticity in the formalism of a single-field theory. We predict that there are two mechanisms by which dislocations emitted directly from the solid–liquid interface induce orientation gradients as well as the formation of subgrain boundaries within a single solidifying cell. We relate these mechanisms to the morphology of the moving solid–liquid interface and identify a suitable control parameter in the PFC model with which we can go between said morphologies by effectively changing the relative strength of the capillary length and kinetic coefficients of the solid–liquid interface. Thus, we are able to provide mechanistic explanations for several microstructural features (with an emphasis on orientation gradients and subgrain boundaries) observed during the rapid solidification of pure materials. We also provide a simple explanation for the formation of “jagged” subgrain boundaries, which is consistent with our experimental observations in rapidly solidified samples of Aluminum, whose mechanisms have thus far been unknown.

Interface morphology↗