Search NASASearch

SEARCH · Search NASA

Results for “Dynamic Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Effects of loading rate and temperature on dynamic fracture of ceramic matrix composites

A hybrid experimental-numerical procedure was used to determine the dynamic fracture initiation toughnesses and the dynamic stress intensity factors of alumina, TiB2-particulate/SiC-matrix, and SiC(w)/Al2O3-matrix composites at room and elevated temperatures under static and impact loadings. The dynamic fracture initiation toughnesses at room and elevated temperatures were greater than the corresponding static fracture toughness. The crack velocity versus the dynamic stress intensity factor relations showed minor differences due to temperature changes but significant differences due to the change in loading rates.

Yang, K. H.

Effects of joint rate and displacement constraints on stability regions

A block diagram showing plant dynamics in normal mode coordinates, a linear feedback controller with command limits, and actuator dynamics with rate and displacement limits is given. The objective is to examine the effects of joint rate and displacement saturation limits on the stability regions. An unstable short period dynamic model is transformed into normal mode coordinates and is augmented with actuator dynamics. A linear feedback controller is used to provide closed-loop stability. The stability with constrained actuator rate limits under varying bandwidth, displacement and command limits is examined.

Shrivastava, P. C.

Metabolic rate meter and method

A method is described for measuring the dynamic metabolic rate of a human or animal. The ratio of the exhaled carbon dioxide to a known amount of C(13)02 introduced into the exhalation is determined by mass spectrometry. This provides an instantaneous measurement of the carbon dioxide generated.

Taylor, T. I.

Nonlinear infrared generation in alkali metal vapors: Steady state susceptibilities and dynamic behavior. Effective relaxation rates and preliminary Raman gain predictions for the Cs system

Effective relaxation rates for atomic cesium pumped by doubled Alexandrite radiation are presented. Laser radiation levels are 8S 1/2 and 9S 1/2; resonance levels 3 = 8P 1/2 and 8P 1/2, respectively. In addition, Raman gain is represented in two graphs which plot chi per atom (10 to the -13 power) at Raman peak versus the infrared wave number per centimeter and the corresponding doubled Alexandrite wave number. One graph covers resonance level 8P, the other 9P; in both cases cesium is pumped with a peak pulse height of 0.5 MW in a 200 micron diameter spot size.

Lawandy, N. M.

Techniques for increasing the update rate of real-time dynamic computer graphic displays

This paper describes several techniques which may be used to increase the animation update rate of real-time computer raster graphic displays. The techniques were developed on the ADAGE RDS 3000 graphic system in support of the Advanced Concepts Simulator at the NASA Langley Research Center. The first technique involves pre-processing of the next animation frame while the previous one is being erased from the screen memory. The second technique involves the use of a parallel processor, the AGG4, for high speed character generation. The description of the AGG4 includes the Barrel Shifter which is a part of the hardware and is the key to the high speed character rendition. The final result of this total effort was a four fold increase in the update rate of an existing primary flight display from 4 to 16 frames per second.

Kahlbaum, W. M., Jr.

Cratering time scales for the Galilean satellites

An attempt is made to estimate the present cratering rate for each Galilean satellite within the correct order of magnitude and to extend the cratering rates back into the geologic past on the basis of evidence from the earth-moon system. For collisions with long and short period comets, the magnitudes and size distributions of the comet nuclei, the distribution of their perihelion distances, and the completeness of discovery are addressed. The diameters and masses of cometary nuclei are assessed, as are crater diameters and cratering rates. The dynamical relations between long period and short period comets are discussed, and the population of Jupiter-crossing asteroids is assessed. Estimated present cratering rates on the Galilean satellites are compared and variations of cratering rate with time are considered. Finally, the consistency of derived cratering time scales with the cratering record of the icy Galilean satellites is discussed.

Shoemaker, E. M.

A homogeneous sample of binary galaxies: Basic observational properties

A survey of optical characteristics for 585 binary systems, satisfying a condition of apparent isolation on the sky, is presented. Influences of various selection effects distorting the average parameters of the sample are noted. The pair components display mutual similarity over all the global properties: luminosity, diameter, morphological type, mass-to-luminosity ratio, angular momentum etc., which is not due only to selection effects. The observed correlations must be caused by common origin of pair members. Some features (nuclear activity, color index) could acquire similarity during synchronous evolution of double galaxies. Despite the observed isolation, the sample of double systems is seriously contaminated by accidental pairs, and also by members of groups and clusters. After removing false pairs estimates of orbital mass-to-luminosity ratio range from 0 to 30 f(solar), with the mean value (7.8 plus or minus 0.7) f(solar). Binary galaxies possess nearly circular orbits with a typical eccentrity e = 0.25, probably resulting from evolutionary selection driven by component mergers under dynamical friction. The double-galaxy population with space abundance 0.12 plus or minus 0.02 and characteristic merger timescale 0.2 H(exp -1) may significantly influence the rate of dynamical evolution of galaxies.

Karachentsev, I. D.

Dynamic buckling estimates

Dynamic buckling estimates for sensitive structures subjected to finite-time loading

COMPRESSION BUCKLING

Dynamic fracture mechanics

Dynamic fracture and crack propagation concepts for ductile materials are reviewed. The equations for calculating dynamic stress integrity and the dynamic energy release rate in order to study dynamic crack propagation are provided. The stress intensity factor versus crack velocity relation is investigated. The uses of optical experimental techniques and finite element methods for fracture analyses are described. The fracture criteria for a rapidly propagating crack under mixed mode conditions are discussed; crack extension and fracture criteria under combined tension and shear loading are based on maximum circumferential stress or energy criteria such as strain energy density. The development and use of a Dugdale model and finite element models to represent crack and fracture dynamics are examined.

Kobayashi, A. S.

Nonlinear systems dynamics in cardiovascular physiology: The heart rate delay map and lower body negative pressure

A preliminary study of the applicability of nonlinear dynamic systems analysis techniques to low body negative pressure (LBNP) studies. In particular, the applicability of the heart rate delay map is investigated. It is suggested that the heart rate delay map has potential as a supplemental tool in the assessment of subject performance in LBNP tests and possibly in the determination of susceptibility to cardiovascular deconditioning with spaceflight.

Hooker, John C.

Effects of update and refresh rates on flight simulation visual displays

An experiment was performed to study the effects of update and refresh rates on dynamic calligraphic CRT displays, particularly those used for visual displays in flight simulators. A moving horizontal line was generated on a CRT and observed at various velocities. Observations were made with both one and two refreshes per update. The data gathered from these observations are presented on plots of refresh-update rate as a function of display velocity. The display velocity where picture degradation occurs can be found by using these plots. These velocities are related to actual simulated aircraft angular and linear velocities. Results show that a visual display updated at 30 Hz and refreshed at 60 Hz degrades at very low simulated aircraft angular and linear velocities. These velocities at which degradation occurs can be significantly increased by increasing the update rate of the visual display. Only minor improvements are possible by refreshing the display twice for each uptake. To display rapidly changing flight scenery without degradation, the display update rate must be far in excess of 60 Hz, typically several hundred Hz.

Kellogg, Gary V.

Rotational excitation of HCN by collisions

Rate constants for the rotational excitation of HCN by collisions with He atoms at temperatures below 100 K were computed from first principles and are presented in tabular form. The potential energy surface was obtained by using the uniform electron gas model of Gordon and Kim (1972) and then joined smoothly to the asymptotic long-range perturbation theory potential valid at large separations. Quantum close-coupling theory was used to analyze the collision dynamics. Individual rates are believed to be accurate to within 50% above 30 K and within a factor of two below 20 K. The results should be extendable to excitation by collision with H2 and may therefore be of value in the study of interstellar clouds.

Green, S.

On the evolution of globular cluster systems. I - Present characteristics and rate of destruction in our Galaxy

The current dynamic state and rate of destruction for the system of globular clusters in the Galaxy are modeled. It is found that gravitational shocks due to the central bulge of the Galaxy are very efficient in destroying clusters on highly radial orbits. This effect, extrapolated at the present unweighted destruction rate over 10 to the 10th yr, can account for the observed difference between the velocity distribution of globular clusters and other tracers of the halo population.

Aguilar, Luis

Metabolic breath analyzer

Instrument measures metabolic breathing rate and dynamics of human beings in atmospheres ranging from normal air to 100 percent oxygen at ambient pressures from 14.7 to 3.0 psia. Measurements are made at rest or performing tasks up to maximum physical capacity under either zero or normal gravity.

Perry, C. L.

Optimal guidance for the space shuttle transition.

A guidance method for the space shuttle's transition from hypersonic entry to subsonic cruising flight is presented. The method evolves from a numerical trajectory optimization technique in which kinetic energy and total energy (per unit weight) replace velocity and time in the dynamic equations. This allows the open end-time problem to be transformed to one of fixed terminal energy. In its ultimate form, 'E-Guidance' obtains energy balance (including dynamic-pressure-rate damping) and path length control by angle-of-attack modulation and cross-range control by roll angle modulation. The guidance functions also form the basis for a pilot display of instantaneous maneuver limits and destination. Numerical results illustrate the E-Guidance concept and the optimal trajectories on which it is based.

Stengel, R. F.

Optimal guidance for the space shuttle transition

A guidance method for the space shuttle's transition from hypersonic entry to subsonic cruising flight is presented. The method evolves from a numerical trajectory optimization technique in which kinetic energy and total energy (per unit weight) replace velocity and time in the dynamic equations. This allows the open end-time problem to be transformed to one of fixed terminal energy. In its ultimate form, E-Guidance obtains energy balance (including dynamic-pressure-rate damping) and path length control by angle-of-attack modulation and cross-range control by roll angle modulation. The guidance functions also form the basis for a pilot display of instantaneous maneuver limits and destination. Numerical results illustrate the E-Guidance concept and the optimal trajectories on which it is based.

Stengel, R. F.

Shuttle-Attached Manipulator System requirements.

Shuttle mission requirements and cost objectives have led to the selection of a Shuttle-Attached Manipulator System (SAMS) as a general purpose mechanism for docking, payload handling, and the general launch and retrieval of free-flying satellites. SAMS design requirements are discussed, giving attention to end effectors, kinematics, timelines, dynamics, load ratings, TV cameras and lights. Requirements for low-cost payload satellites are considered, taking into account satellites with modular subsystems which are designed for replacement and for resupply in orbit by SAMS.

Bodey, C. E.