Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Reservoir Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Chlorine catalyzed destruction of ozone - Implications for ozone variability in the upper stratosphere

The annual mean and the annual amplitude of ozone have been derived from ozone measurements from the SBUV and SBUV/2 spectrometers on board the Nimbus-7 and NOAA-11 satellites. These values differ significantly from values calculated using a two-dimensional model of stratospheric photochemistry and dynamics with standard chemistry. We have found that the differences between the calculated and data-derived values are considerably improved by changing the partitioning in the Cly family to create a larger reservoir of HCl and reducing ClO. This is accomplished by including a channel for the products HCl + O2 from the reaction ClO + OH in addition to the products Cl + HO2. This partitioning also improves the agreement between the calculated and measured values of ClO/HCl ratio.

Chandra, Sushil↗
NASA NTRSDate not supplied

Spatiotemporal Methane Emissions from Global Lakes and Reservoirs

Inland aquatic systems, such as lakes and reservoirs, contribute substantially to global methane (CH4) emissions; yet are among the most uncertain components of the total CH4 budget. Lakes and reservoirs have received recent attention as they may generate high CH4 fluxes. Improved quantification of these CH4 fluxes, particularly their spatiotemporal distribution, is key to realistically incorporating them in CH4 modeling and budget studies. Here we report on a new global, gridded (0.25° lat × 0.25° lon) study of lake and reservoir CH4 emissions, accounting for new knowledge regarding lake and reservoir areal extent and distribution, and spatiotemporal emission patterns influenced by diurnal variability, temperature-dependent seasonality, satellite-derived freeze-thaw dynamics, and eco-climatic and physical CH4-centric type classification. The results of this new data set comprise daily CH4 emissions from lake and reservoirs throughout the full annual cycle and are tightly anchored to field observations, in situ measurements, and remote-sensing observations. Results show that reservoirs cover 297 × 103 km2 globally and emit 10.1 Tg CH4 yr-1 from diffusive (1.2 Tg CH4 yr-1) and ebullitive (8.9 Tg CH4 yr-1) emission pathways. On a global scale, CH4 emitting areas of lakes cover 1853 × 103 km2 and emit 37.1 Tg CH4 yr-1 from diffusive (17.1 Tg CH4 yr-1) and ebullitive (23.0 Tg CH4 yr-1) emission pathways and an additional ebullition flux of 5.2 Tg CH4 yr-1 upon ice-melt due to the accumulation of bubbles during the freeze period. This analysis of lakes and reservoir CH4 emission addresses multiple gaps and uncertainties in previous studies and represents an important contribution to studies of the global CH4 budget. The new data sets and methodologies from this study provide a framework to better understand and model the current and future role of lakes and reservoirs in the global CH4 budget and to guide efforts to mitigate inland aquatic system CH4 emissions. This presentation will describe the methodologies applied and the major results of this study focusing on the spatiotemporal distribution of lake and reservoir type classification, processes driving lake and reservoir emission seasonality, and the contribution of individual lake and reservoir types to the annual cycle of inland aquatic CH4 emissions.

Spatiotemporal↗
NASA NTRS1994

Hubble Space Telescope observations of planetary nebulae in the magellanic clouds. 2: SMP 85, a young planetary

We have obtained Hubble Space Telescope Planetary Camera images in the (O III) lambda 5007 A emission line, and Faint Object Spectrograph (FOS) UV spectrophotometry of the low-excitation planetary nebula SMP 85 in the Large Magellanic Cloud. By combining these results with existing optical spectrophotometry, absolute flux measurements, and dynamical and density information, we have been able to construct a fully self-consistent nebular model. This proves that SMP 85 is a dense, young, carbon-rich object which started to be ionized about 500-1000 years ago, and which contains a substantial inner reservoir of atomic or molecular gas, probably in the form of many small cloudlets. These cloudlets have been ejected at a velocity not exceeding 6 km/s, a result which, together with the morphology is an important clue to mass loss during late asymptotic giant branch (AGB) evolution. We have directly detected the central star through its UV continuum emission, and from both Zanstra techniques and nebular modeling derive a stellar temperature of 46000 +/- 2000 K, a stellar luminosity of 7300 +/- 700 solar luminosity, and a core mass of 0.63-0.67 solar mass. The nebular analysis also demonstrates that there is severe depletion of the nebular gases onto dust grains, most likely of the calcium magnesium silicate variety; a surprising result in view of the carbon-rich nature of the ionized nebula.

Dopita, Michael A.↗
NASA NTRS2004

High Silicate Crystalline-to-Amorphous Ratios in Comets C/2001 Q4 (NEAT) and Hale-Bopp

Crystalline silicates, by their apparent absence in the ISM, are dust grains that experienced high temperatures in the solar nebula. Mg-rich crystalline silicates formed either by condensation from hot nebular gases (1450 K) or by the annealing of Mg-rich amorphous silicates (approximately 1000 K) in shocks in the 5-10AU region or by radial transport into and out of the hot inner zones, e.g., T(sub d) greater than 1000K at r(sub h) less than 5AU, 10(exp -6) -10(exp -5) solar mass per year, alpha = 10(exp -4) of the early solar nebula. Mg-rich crystalline silicates are found in interplanetary dust particles (IDPs) and produce IR spectral features in many Oort cloud comets. In May 2004, we discovered strong crystalline silicate features in the dynamically new Oort cloud comet C/2001 Q4 (NEAT). Thermal emission modeling of comets Q4 and C/1995 O1 (Hale-Bopp) demonstrate that both these comets have similar, high silicate crystalline-toamorphous ratios of 2.4 and 2.1, respectively, indicating that these icy planetesimals aggregated from similar reservoirs of material or that crystalline silicates were widely distributed within the comet-forming zone. This argues for efficient annealing mechanisms and radial mixing.

Wooden, D. H.↗
NASA NTRS2018

Modeling the Distribution and Type of High-Latitude Natural Wetlands for Methane Studies

High latitude (>50N) natural wetlands emit a substantial amount of methane to the atmosphere, and are located in a region of amplified warming. Northern hemisphere high latitudes are characterized by cold climates, extensive permafrost, poor drainage, short growing seasons, and slow decay rates. Under these conditions, organic carbon accumulates in the soil, sequestering CO2 from the atmosphere. Methanogens produce methane from this carbon reservoir, converting stored carbon into a powerful greenhouse gas. Methane emission from wetland ecosystems depends on vegetation type, climate characteristics (e.g, precipitation amount and seasonality, temperature, snow cover, etc.), and geophysical variables (e.g., permafrost, soil type, and landscape slope). To understand how wetland methane dynamics in this critical region will respond to climate change, we have to first understand how wetlands themselves will change and therefore, what the primary controllers of wetland distribution and type are. Understanding these relationships permits data-anchored, physically-based modeling of wetland distribution and type in other climate scenarios, such as paleoclimates or future climates, a necessary first step toward modeling wetland methane emissions in these scenarios. We investigate techniques and datasets for predicting the distribution and type of high latitude (>50N) natural wetlands from a suite of geophysical and climate predictors. Hierarchical clustering is used to derive an empirical methane-centric wetland model. The model is applied in a multistep process first to predict the distribution of wetlands from relevant geophysical parameters, and then, given the predicted wetland distribution, to classify the wetlands into methane-relevant types using an expanded suite of climate and biogeophysical variables. As the optimum set of predictor variables is not known a priori, the model is applied iteratively, and each simulation is evaluated with respect to observed high-latitude wetlands.

Romanski, Joy↗
NASA NTRS2004

High Silicate Crystalline-to-Amorphous Ratios in Comets C/2001 Q4 (NEAT) and Hale-Bopp

Crystalline silicates, by their apparent absence in the ISM, are dust grains that experienced high temperatures in the solar nebula. Mg-rich crystalline silicates formed either by condensation from hot nebular gases (1450 K) or by the annealing of Mg-rich amorphous silicates (approx. 1000 K) in shocks in the 5-10 AU region or by radial transport into and out of the hot inner zones, e.g., T(sub d) > 1000 K at r(sub h) < 5 AU, 10(exp -6) - 10(exp -5) M(sub O)/yr, alpha = 10(exp -4) of the early solar nebula. Mg-rich crystalline silicates are found in interplanetary dust particles (IDPs) and produce IR spectral features in many Oort cloud comets. In May 2004, we discovered strong crystalline silicate features in the dynamically new Oort cloud comet C/2001 Q4 (NEAT). Thermal emission modeling of comets Q4 and C/1995 O1 (Hale-Bopp) demonstrate that both these comets have similar, high silicate crystalline-to-amorphous ratios of 2.4 and 2.1, respectively, indicating that these icy planetesimals aggregated from similar reservoirs of material or that crystalline silicates were widely distributed within the comet-forming zone. This argues for efficient annealing mechanisms and radial mixing.

Wooden, D. H.↗
NASA NTRS2015

Pyrotechnically Actuated Gas Generator Utilizing Aqueous Methanol

A gas-generating device was developed to supplement the ram-air inflation of a supersonic ballute. The device is designed to initially pressurize the ballute following deployment, exposing and orienting its ram-air inlets to free-stream air for complete inflation. The supplemental pressurization decreases the total inflation time, and increases the likelihood of a successful inflation. The device contains a reservoir filled with an aqueous mixture of methanol that, when released in to the interior of the ballute, rapidly vaporizes due to the low ambient pressure. Upon activation of the device, a pair of redundant ring mechanisms initiate pyrotechnic charges that pressurize and rupture the reservoir, resulting in ejection of the methanol in to the ballute. In addition to its role in inflation, the device serves as the structural connection to the ballute. Analytical models were developed for the inflation capability of the device, which were verified using vacuum chamber testing of developmental hardware. Static, deployment, and environmental testing demonstrated the functionality of the ring mechanism and reservoir under several temperature and pressure conditions. Finally, the device was successfully operated during the first Supersonic Flight Dynamics Test (SFDT) of NASA's Low Density Supersonic Decelerator (LDSD) project. The design architecture is scalable to accommodate different quantities of gas generation, can be adjusted to operate in a variety of temperature and atmospheric pressure regimes, and provides a robust device that may be installed with minimal risk to personnel or hardware.

IA↗
NASA NTRS2024

The dynamical origins of the dark comets and a proposed evolutionary track

So-called ‘dark comets’ are small, morphologically inactive near-Earth objects (NEOs) that exhibit nongravitational accelerations inconsistent with radiative effects. These objects exhibit short rotational periods (minutes to hours), where measured. We find that the strengths required to prevent catastrophic disintegration are consistent with those measured in cometary nuclei and expected in rubble pile objects. We hypothesize that these dark comets are the end result of a rotational fragmentation cascade, which is consistent with their measured physical properties. We calculate the predicted size-frequency distribution for objects evolving under this model. Using dynamical simulations, we further demonstrate that the majority of these bodies originated from the 𝜈6 resonance, implying the existence of volatiles in the current inner main belt. Moreover, one of the dark comets, (523599) 2003 RM, likely originated from the outer main belt, although a JFC origin is also plausible. These results provide strong evidence that volatiles from a reservoir in the inner main belt are present in the near-Earth environment.

Aster G Taylor↗
NASA NTRS1976

Analysis of information systems for hydropower operations: Executive summary

An analysis was performed of the operations of hydropower systems, with emphasis on water resource management, to determine how aerospace derived information system technologies can effectively increase energy output. Better utilization of water resources was sought through improved reservoir inflow forecasting based on use of hydrometeorologic information systems with new or improved sensors, satellite data relay systems, and use of advanced scheduling techniques for water release. Specific mechanisms for increased energy output were determined, principally the use of more timely and accurate short term (0-7 days) inflow information to reduce spillage caused by unanticipated dynamic high inflow events. The hydrometeorologic models used in predicting inflows were examined in detail to determine the sensitivity of inflow prediction accuracy to the many variables employed in the models, and the results were used to establish information system requirements. Sensor and data handling system capabilities were reviewed and compared to the requirements, and an improved information system concept was outlined.

Sohn, R. L.↗
NASA NTRS1976

Analysis of information systems for hydropower operations

The operations of hydropower systems were analyzed with emphasis on water resource management, to determine how aerospace derived information system technologies can increase energy output. Better utilization of water resources was sought through improved reservoir inflow forecasting based on use of hydrometeorologic information systems with new or improved sensors, satellite data relay systems, and use of advanced scheduling techniques for water release. Specific mechanisms for increased energy output were determined, principally the use of more timely and accurate short term (0-7 days) inflow information to reduce spillage caused by unanticipated dynamic high inflow events. The hydrometeorologic models used in predicting inflows were examined to determine the sensitivity of inflow prediction accuracy to the many variables employed in the models, and the results used to establish information system requirements. Sensor and data handling system capabilities were reviewed and compared to the requirements, and an improved information system concept outlined.

Sohn, R. L.↗
NASA NTRS1992

Episodic total ozone minima and associated effects on heterogeneous chemistry and lower stratospheric transport

Three-dimensional model simulations are used to describe the January 31, 1989 ozone minihole over Stavanger, Norway. This minihole is typical of many transient events in the lower stratosphere that arise because of cyclonic-scale disturbances in the troposphere. Although the ozone reduction is a short-lived reversible dynamical event, through heterogeneous chemical processes there can be a significant transfer of chlorine from reservoir molecules to active radicals. This chemically perturbed air is defined as processed air, and it is found that a single event can produce enough processed air to reduce the HCl in the entire polar vortex. Chemical processing on clouds associated with transient events is shown to be a major source of processed air in the polar vortex in December before background temperatures are cold enough for more uniform heterogeneous conversion.

Rood, Richard B.↗
NASA NTRS2014

Initial in Situ Measurements of Perennial Meltwater Storage in the Greenland Firn Aquifer

A perennial storage of water in a firn aquifer was discovered in southeast Greenland in 2011. We present the first in situ measurements of the aquifer, including densities and temperatures. Water was present at depths between approx. 12 and 37m and amounted to 18.7 +/- 0.9 kg in the extracted core. The water filled the firn to capacity at approx. 35m. Measurements show the aquifer temperature remained at the melting point, representing a large heat reservoir within the firn. Using model results of liquid water extent and aquifer surface depth from radar measurements, we extend our in situ measurements to the Greenland ice sheet. The estimated water volume is 140 +/- 20 Gt, representing approx. 0.4mm of sea level rise (SLR). It is unknown if the aquifer temporary buffers SLR or contributes to SLR through drainage and/or ice dynamics.

measurements↗
NASA NTRSDate not supplied

Monodisperse Single-Material Granular Tribocharging Modeling and Experimental Validation

Charge transfer between insulating grains has been a topic of interest for many years as this phenomenon is extremely important to many areas in industry. Of particular interest to NASA is the behavior of electrically insulative dust grains such as those found on the lunar surface. Whether poured from a scoop during sample collection activities, agitated inside a drum via mining robots, or fluidized by a gas plume, particle-particle interactions between similar granular materials will be widespread on the Moon. Designers hope to have a predictive model for how dust grains are charged, transported, and deposited on flight systems to better understand issues electrostatics may cause in future missions. While difference in work function is often seen as a driver for charge transfer between two materials, this is an incomplete representation for insulative particles. Other asymmetries in the system can also lead to charge being transferred: one such being the difference between static vs dynamic particles. Experiments performed under vacuum in the Electrostatics and Surface Physics Laboratory (ESPL) clearly show that particles having more contacts with other particles tend to charge positively and particles having fewer contacts tend to charge negatively, despite being made from the same material. During these experiments, monodisperse (population of single diameter) spherical particles were held in a reservoir which was then elevated at one end to slope into a Faraday cup used to measure bulk charge of the grains. Care was taken to limit the number of spheres bouncing out of the cup, to isolate the beads from the container itself so that only grain-to-grain interactions occurred, and to assure neutrality of the beads before the experiment began. A discrete element method (DEM) modeling package already incorporating many granular mechanics interactions was augmented to include the electrostatic behaviors seen in experiments. The model can reproduce the experimental results above by tracking the number of contacts between pairs of individual grains and applying a charge transfer condition related to this contact parameter. The experimental results as well as their incorporation into the improved modeling suite will be discussed. Future work includes adding additional asymmetries into the experiments/model such as polydisperse populations of spherical particles and irregularly shaped grains.

granular↗
NASA NTRSDate not supplied

Monodisperse Single-Material Granular Tribocharging Modeling and Experimental Validation

Charge transfer between insulating grains has been a topic of interest for many years as this phenomenon is extremely important to many areas in industry. Of particular interest to NASA is the behavior of electrically insulative dust grains such as those found on the lunar surface. Whether poured from a scoop during sample collection activities, agitated inside a drum via mining robots, or fluidized by a gas plume, particle-particle interactions between similar granular materials will be widespread on the Moon. Designers hope to have a predictive model for how dust grains are charged, transported, and deposited on flight systems to better understand issues electrostatics may cause in future missions. While difference in work function is often seen as a driver for charge transfer between two materials, this is an incomplete representation for insulative particles. Other asymmetries in the system can also lead to charge being transferred: one such being the difference between static vs dynamic particles. Experiments performed under vacuum in the Electrostatics and Surface Physics Laboratory (ESPL) clearly show that particles having more contacts with other particles tend to charge positively and particles having fewer contacts tend to charge negatively, despite being made from the same material. During these experiments, monodisperse (population of single diameter) spherical particles were held in a reservoir which was then elevated at one end to slope into a Faraday cup used to measure bulk charge of the grains. Care was taken to limit the number of spheres bouncing out of the cup, to isolate the beads from the container itself so that only grain-to-grain interactions occurred, and to assure neutrality of the beads before the experiment began. A discrete element method (DEM) modeling package already incorporating many granular mechanics interactions was augmented to include the electrostatic behaviors seen in experiments. The model can reproduce the experimental results above by tracking the number of contacts between pairs of individual grains and applying a charge transfer condition related to this contact parameter. The experimental results as well as their incorporation into the improved modeling suite will be discussed. Future work includes adding additional asymmetries into the experiments/model such as polydisperse populations of spherical particles and irregularly shaped grains.

electrostatics↗
NASA NTRS1982

A basic code for the prediction of transient three-dimensional turbulent flowfields

A primitive pressure-velocity finite difference code has been developed to predict transient three-dimensional turbulent flow. The code is a simplified yet effective prediction procedure for use by persons with little experience in computational fluid dynamics, and into which user-oriented complexities can easily be added. The method is based on the transient two-dimensional Los Alamos SOLA prediction technique for laminar flows. Turbulence is simulated by means of a two-equation turbulence model; species diffusion and buoyancy are also included. Two applications of the code are presented to local destratification near the release structure of a reservoir and to the deflection of a jet entering normally into a uniform cross-flow. Predicted results exhibit good agreement with experimental data, showing that a useful characterization of fully three-dimensional flows is now available.

Busnaina, A. A.↗
NASA NTRS2018

Outer Solar System Material in Inner Solar System Regolith Breccias

There is excellent evidence that a dynamical instability in the early solar system led to gravitational interactions between the giant planets and trans-Neptunian objects (TNOs). Giant planetary migration triggered by the instability dispersed a disk of primordial TNOs and created a number of small body reservoirs (e.g. the Kuiper Belt, scattered disk, irregular satellites, and the Jupiter/Neptune Trojan populations). It also injected numerous bodies into the main asteroid belt, where modeling shows they can successfully reproduce the observed P and D-type asteroid populations. During the injection era and after implantation, some of these “main belt TNOs” would have collided with S-class asteroids. Some of this material may have survived as a component of asteroid regolith breccias. Thus, we have been searching for evidence of these impact events in the form of carbonaceous xenoliths in brecciated ordinary chondrites. These xenoliths would have experienced a wide range of impact velocities, and therefore we should expect to see everything between relatively unaltered material to completely shock-melted lithologies. This material might also be different from the carbonaceous chondrites that represent standard C-complex asteroids. A goal of this research is to define useful criteria for distinguishing between these two classes of materials, including O, Cr, N and C isotopes, petrographic characteristics, and chronology.

Zolensky, M.↗
NASA NTRS1995

Collapse and fragmentation of molecular cloud cores. 2: Collapse induced by stellar shock waves

The standard scenario for low-mass star formation involves 'inside-out' collapse of a dense molecular cloud core following loss of magnetic field support through ambipolar diffusion. However, isotopic anomalies in presolar grains and meteoritical inclusions imply that the collapse of the presolar cloud may have been triggered by a stellar shock wave. This paper explores 'outside-in' collapse, that is, protostellar collapse initiated directly by the compression of quiescent dense cloud cores impacted by relatively slow stellar shock waves. A second-order accurate, gravitational hydrodynamics code has been used to study both the spherically symmetrical and three-dimensional evolution of initially centrally condensed, isothermal, self-gravitating, solar-mass cloud cores that are struck by stellar shock waves with velocities up to 25 km/s and postshock temperatures of 10 to 10,000 K. The models show that such mild shock waves do not completely shred and destroy the cloud, and that the dynamical ram pressure can compress the cloud to the verge of self-gravitational collapse. However, compression caused by a high postshock temperature is a considerably more effective means of inducing collapse. Shock-induced collapse produces high initial mass accretion rates (greater than 10(exp -4) solar mass/yr in a solar-mass cloud) that decline rapidly to much lower values, depending on the presence (approximately 10(exp -6) solar mass/yr) or absence (approximately 10(exp -8) to 10(exp -7) solar mass/yr) of an infinite reservoir of mass. Stellar mass accretion rates approximately 10(exp -7) solar mass/yr have been previously inferred from the luminosities of T Tauri stars; balanced mass accretion (stellar rate = envelope rate) at approximately 10(exp -7) solar mass/yr could then be possible if accretion occurs from a finite mass reservoir. Fluid tracers are used to determine what fraction of the stellar shock material is incorporated into the resulting protostellar object and disk; roughly half the impinging material is injected into the collapsing cloud core when there is a high postshock temperature. The models are consistent with a scenario where an AGB star wind triggered the collapse of the presolar cloud while injecting about 0.01 solar mass of matter derived from the AGB star envelope, as has been separately inferred on the basis of nucleosynthesis calculations.

Boss, Alan P.↗
NASA NTRS2018

Meteoritic Evidence for Injection of Trans-Neptunian Objects into the Inner Solar System

There is excellent evidence that a dynamical instability in the early solar system led to gravitational interactions between the giant planets and trans-Neptunian planetesimals. Giant planetary migration triggered by the instability dispersed a disk of primordial trans-Neptunian object (TNOs) and created a number of small body reservoirs (e.g. the Kuiper Belt, scattered disk, irregular satellites, and the Jupiter/Neptune Trojan populations). It also injected numerous bodies into the main asteroid belt, where modeling shows they can successfully reproduce the observed P and D-type asteroid populations.

Zolensky, M.↗