Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTROMAGNETIC PULSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Early-Time (E1) High-Altitude Electromagnetic Pulse Effects on Transient Voltage Surge Suppressors

Determining the effectiveness of surge and pulse protection devices in the United States power grid against effects of a High-Altitude Electromagnetic Pulse (HEMP) is crucial in determining the present state of grid resilience. Transient Voltage Surge Suppressors (TVSS) are used to protect loads in substations from transient overvoltages. Designed to mitigate the effects of lightning, their response to a HEMP event is unknown and was determined. TVSSs were tested in two unique configurations using a pulser that generates pulses in the tens of nanoseconds scale to determine their protective capability as well as to determine their self-resilience against HEMP pulses. Testing concluded that TVSS devices adequately protect against microsecond scale pulses like lightning but do not protect against pulses resembling HEMP events. It suggests that TVSS devices should not be relied upon to mitigate the effects of HEMP pulses.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Literature Review of Electromagnetic Pulse (EMP) and Geomagnetic Disturbance (GMD) Effects on Oil and Gas Pipeline Systems

This document summarizes the findings of a review of published literature regarding the potential impacts of electromagnetic pulse (EMP) and geomagnetic disturbance (GMD) phenomena on oil and gas pipeline systems. The impacts of telluric currents on pipelines and their associated cathodic protection systems has been well studied. The existing literature describes implications for corrosion protection system design and monitoring to mitigate these impacts. Effects of an EMP on pipelines is not a thoroughly explored subject. Most directly related articles only present theoretical models and approaches rather than specific analyses and in-field testing. Literature on SCADA components and EMP is similarly sparse and the existing articles show a variety of impacts to control system components that range from upset and damage to no effect. The limited research and the range of observed impacts for the research that has been published suggests the need for additional work on GMD and EMP and natural gas SCADA components.

02 PETROLEUM↗
DOE OSTI2017

Comparison of ATLOG and Xyce for Bell Labs Electromagnetic Pulse Excitation of Finite-Long Dissipative Conductors over a Ground Plane.

This report details the modeling results for the response of a finite-length dissipative conductor interacting with a conducting ground to the Bell Labs electromagnetic pulse excitation. We use both a frequency-domain and a time-domain method based on transmission line theory through a code we call ATLOG - Analytic Transmission Line Over Ground. Results are compared to the circuit simulator Xyce for selected cases. Intentionally Left Blank

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Accelerated Time-Domain Modeling of Electromagnetic Pulse Excitation of Finite-Length Dissipative Conductors over a Ground Plane via Function Fitting and Recursive Convolution

In this report we overview the fundamental concepts for a pair of techniques which together greatly hasten computational predictions of electromagnetic pulse (EMP) excitation of finite-length dissipative conductors over a ground plane. In a time- domain, transmission line (TL) model implementation, predictions are computationally bottlenecked time-wise, either for late-time predictions (about 100ns-10000ns range) or predictions concerning EMP excitation of long TLs (order of kilometers or more ). This is because the method requires a temporal convolution to account for the losses in the ground. Addressing this to facilitate practical simulation of EMP excitation of TLs, we first apply a technique to extract an (approximate) complex exponential function basis-fit to the ground/Earth's impedance function, followed by incorporating this into a recursion-based convolution acceleration technique. Because the recursion-based method only requires the evaluation of the most recent voltage history data (versus the entire history in a "brute-force" convolution evaluation), we achieve necessary time speed- ups across a variety of TL/Earth geometry/material scenarios. Intentionally Left Blank

36 MATERIALS SCIENCE↗
DOE OSTI2022

Reflection and transmission of electromagnetic pulses at a planar dielectric interface -- theory and quantum lattice simulations

There is considerable interest in the application of quantum information science to advance computations in plasma physics. A particular point of curiosity is whether it is possible to take advantage of quantum computers to speed up numerical simulations relative to conventional computers. Many of the topics in fusion plasma physics are classical in nature. In order to implement them on quantum computers it will require couching a classical problem in the language of quantum mechanics. Electromagnetic waves are routinely used in fusion experiments to heat a plasma or to generate currents in the plasma. The propagation of electromagnetic waves is described by Maxwell equations with an appropriate description of the plasma as a dielectric medium. Before advancing to the tensor dielectric of a magnetized plasma, this paper considers electromagnetic wave propagation in a one-dimensional inhomogeneous scalar dielectric. The classic theory of scattering of plane electromagnetic waves at a planar interface, separating two different dielectric media, leads to Fresnel equations for reflection and transmission coefficients. In contrast to plane waves, this paper is on the reflection and transmission of a spatially confined electromagnetic pulse. Following an analytical formulation for the scattering of a Gaussian pulse, it is deduced that the maximum transmission coefficient for a pulse is $\sqrt{n_2/n_1}$ times that for a plane wave; the incident and transmitted pulses propagating in dielectric media with refractive indices $n_1$ and $n_2$, respectively. The analytical theory is complemented by numerical simulations using a quantum lattice algorithm for Maxwell equations. The algorithm, based on the Riemann-Silberstein-Weber representation of the electromagnetic fields and expressed in term of qubits, is an interleaved sequence of entangling operators at each lattice site and unitary streaming operators which transmit information from one site to an adjacent lattice site. Besides substantiating results from the theory for Gaussian pulses, numerical simulations show their validity for non-Gaussian pulses. Apart from their time-asymptotic forms, the simulations display an interplay between the incident, reflected, and transmitted pulses in the vicinity of the transition region between two dielectric media.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Pulsed electromagnetic field induces Ca2+-dependent osteoblastogenesis in C3H10T1/2 mesenchymal cells through the Wnt-Ca2+/Wnt-β-catenin signaling pathway

Highlights: • C3H10T1/2 cell proliferation can be greatly promoted by PEMF exposure. • C3H10T1/2 cell differentiation into osteoblast can be induced upon the stimulation of PEMF. • Intracellular [Ca2+]i up-regulation was observed during the process of PEMF-induced C3H10T1/2 cell differentiation. • PEMF-induced C3H10T1/2 cell differentiation was Ca2+-dependent. • PEMF-induced [Ca2+]i elevation suggested a combination of Wnt/Ca2+ and Wnt/β-catenin signaling pathways. Pulsed electromagnetic fields (PEMFs) are effective in healing fractures and improving osteoporosis. However, their effect on mesenchymal cells remains largely unknown. In this study, the effects of PEMF on osteoblastogenesis and its underlying molecular signaling mechanisms were systematically investigated in C3H10T1/2 cells. C3H10T1/2 mesenchymal cells were exposed to 30-Hz PEMF bursts at various intensities for 3 consecutive days. The optimal PEMF exposure (30 Hz, 1 mT, 2 h/day) was applied in subsequent experiments. Our results suggest that intracellular [Ca{sup 2+}]i in C3H10T1/2 cells can be upregulated upon exposure to PEMF and that PEMF-induced C3H10T1/2 cell differentiation was Ca{sup 2+}-dependent. The pro-osteogenic effect of PEMF on Ca{sup 2+}-dependent osteoblast differentiation was then verified by alkaline phosphatase (ALP) and von Kossa staining. Furthermore, PEMF promoted the gene expression and protein synthesis of the Wnt/β-catenin pathway. Increased [Ca{sup 2+}]i in the nucleoplasm was followed by the mobilization and translocation of β-catenin into the nucleus in C3H10T1/2 cells. A model of Wnt/β-catenin signaling and the Wnt/Ca2+ signaling network is proposed. Taken together, these findings indicated for the first time that PEMF induces osteoblastogenesis through increased intracellular [Ca{sup 2+}]i and the Wnt-Ca2+/Wnt-β-catenin signaling pathway in C3H10T1/2 mesenchymal cells.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Energy density and spectrum of single-cycle and sub-cycle electromagnetic pulses

Based on the exact solution of the Maxwell equations in the form of a collapsing spherical vector wave specified by an arbitrary function of time, we have calculated the maximum energy density that can be achieved when focusing extremely short pulses of various shapes. It is shown that our earlier formula expressing the maximum energy density in terms of the spectrum parameters for Gaussian quasi-monochromatic pulses is approximately (with an accuracy of ±40 %) valid for the main types of extremely short pulses. (extremely short laser pulses)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Qubit lattice algorithm simulations of the scattering of a bounded two dimensional electromagnetic pulse from an infinite planar dielectric interface

Qubit lattice algorithm (QLA) simulations are performed for a two-dimensional spatially bounded pulse propagating onto a plane interface between two dielectric slabs. QLA is an initial value scheme that consists of a sequence of unitary collision and streaming operators, with appropriate potential operators, that recover Maxwell equations in inhomogeneous dielectric media to the second order in the lattice discreteness. For the case of total internal reflection, there is transient energy transfer into the second medium due to the evanescent fields as the Poynting unit vector of the pulse is rotated from its incident to reflected direction. Because of the finite spatial extent of the pulse, a self-consistent Goos–Hanchen-type displacement along the interface is found without imposing any explicit interface boundary conditions on the fields. For normal incidence, the standard Fresnel coefficients are recovered for appropriately averaged QLA fields. Energy is conserved at all times to seven significant figures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Electromagnetic Pulse Excitation of Finite-Long Dissipative Conductors over a Conducting Ground Plane in the Frequency Domain.

This report details the modeling results for the response of a finite-length dissipative conductor interacting with a conducting ground to a hypothetical nuclear device with the same output energy spectrum as the Fat Man device. We use a frequency-domain method based on transmission line theory and implemented it in a code we call ATLOG - Analytic Transmission Line Over Ground. Select results are compared to ones computed using the circuit simulator Xyce. Intentionally Left Blank

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

Electromagnetic Pulse Excitation of Finite-Long Dissipative Conductors over a Conducting Ground Plane in the Time Domain

This report details the modeling results for the response of a finite-length dissipative conductor interacting with a conducting ground to a hypothetical nuclear device with the same output energy spectrum as the Fat Man device. We use a time-domain method based on transmission line theory that allows accounting for time-varying air conductivities. We implemented such method in a code we call ATLOG - Analytic Transmission Line Over Ground. Results are compared the frequency-domain version of ATLOG previously developed and to the circuit simulator Xyce in some instances. Intentionally Left Blank

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

ATLOG Modeling of Aerial Cable from the November 2016 HERMES Electromagnetic Pulse Experiments

This report details the comparison of ATLOG modeling results for the response of a finite-length dissipative aerial conductor interacting with a conducting ground to a measurement taken November 2016 at the High-Energy Radiation Megavolt Electron Source (HERMES) facility. We use the ATLOG time-domain method based on transmission line theory. Good agreement is observed between simulations and experiments. Intentionally Left Blank

47 OTHER INSTRUMENTATION↗