Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Modeling, analysis, and code/data validation of DIII-D tokamak divertor experiments on ELM and non-ELM plasma tungsten sputtering erosion

Abstract We analyzed recent DIII-D tokamak tungsten divertor probe experiments using advanced, coupled, sputter erosion/redeposition, plasma, and surface response code packages. Modeling is done for ELMing H-mode, and L-mode plasmas, impinging on various size tungsten deposits on Divertor Material Evaluation System (DiMES) carbon probes. The simulations compute 3D, full kinetic, sub-gyromotion, impurity sputtering and transport, including changes in tungsten surface composition and response due to mixed deuterium and carbon ions irradiation. Per our analysis, ELM (edge localized mode) plasma sputtering in DIII-D mostly involves free-streaming high energy (∼500–1000 eV) D + and C +6 ions, with high near-surface plasma density. L-Mode sputtering is due to impurity sputtering (C, W) only, with lower density. All cases show complete redeposition of tungsten on the divertor, with significant redeposition on the tungsten spots themselves, and low self-sputtering. Comparison of ELM plasma gross tungsten erosion simulation results with in-situ spectroscopic data is good, as are code/data comparisons of net erosion using post-exposure Rutherford backscattering (RBS) data for the L-mode probes. The analysis, extrapolated to a full tungsten divertor, implies low net erosion and negligible plasma contamination from sputtering. These results support the use of high-Z plasma facing surfaces in ITER and beyond.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ELM–Wet: Inclusion of a Wet–Landunit With Sub–Grid Representation of Eco–Hydrological Patches and Hydrological Forcing Improves Methane Emission Estimations in the E3SM Land Model (ELM)

Wetlands are the largest emitters of biogenic methane (CH 4 ) and represent the highest source of uncertainty in global CH 4 budgets. Here, we aim to improve the realism of wetland representation in the U.S. Department of Energy's Exascale Earth System Model land surface model, ELM, thereby reducing uncertainty of CH 4 flux predictions. We develop an updated version, ELM-Wet, where we activate a separate landunit for wetlands that handles multiple wetland-specific eco-hydrological patch functional types. We introduce more realistic hydrological forcing through prescribing site-level constraints on surface water elevation, which allows resolving different sustained inundation depth for different patches, and if data exists, prescribing inundation depth. We modified the calculation of aerenchyma transport diffusivity based on observed conductance per leaf area for different vegetation types. We use Bayesian Optimization to parameterize CO 2 and CH 4 fluxes in the developed wet-landunit. Site-level simulations of a coastal non-tidal freshwater wetland in Louisiana were performed with the updated model. Eddy covariance observations of CO 2 and CH 4 fluxes from 2012 to 2013 were used to train the model and data from 2021 were used for validation. Patch-specific chamber flux observations and observations of CH 4 concentration profiles in the soil porewater from 2021 were used for evaluation of the model performance. Our results show that ELM-Wet reduces the model's CH 4 emission root mean squared error by up to 33% and is able to represent inter-daily CO 2 and CH 4 flux variability across the wetland's eco-hydrological patches, including during periods of extreme dry or wet conditions.

54 ENVIRONMENTAL SCIENCES↗

Imaging divertor strike point splitting in RMP ELM suppression experiments in the DIII-D tokamak [Imaging divertor strike point splitting in RMP ELM suppression experiments]

Fast visible imaging of the lower divertor from above is used to study the structure and dynamics of lobes induced by resonant magnetic perturbations (RMPs) in Edge-Localized Mode (ELM) suppression experiments in DIII-D. The best compromise between the amount of light and sharp imaging was obtained using emission at 601 nm from Fulcher band molecular deuterium. Multiple spatially resolved peaks in the D 2 emission, taken as a proxy for the particle flux, are readily resolved during RMPs, in contrast to the heat flux measured by infrared cameras, which shows little spatial structure in ITER-like conditions. The 25 mm objective lens provides high spatial resolution (2–4 mm/pixel) from the centerpost to the outer shelf over 40° toroidally that overlaps the field of view of the IRTV that measures the divertor heat flux, allowing direct comparison in non-axisymmetric discharges. The image is coupled to a Phantom 7.3 camera using a Schott wound fiber bundle, providing high temporal resolution that allows the lobe dynamics to be resolved between ELMs and across ELM suppression onset. Furthermore, these measurements are used to study the heat and particle flux in 3D magnetic fields and to validate models for the plasma response to RMPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ELM-free and inter-ELM divertor heat flux broadening induced by edge harmonics oscillation in NSTX

A new n =1 dominated edge harmonic oscillation (EHO) has been found in NSTX. The new EHO, rotating toroidally in the counter-current direction and the opposite direction of the neutral beam, was observed during certain inter-ELM and ELM-free periods of H-mode operation. This EHO is associated with a significant broadening of the integral heat flux width (${{\lambda}_{\operatorname{int}}}$ ) by up to 150%, and a decrease in the divertor peak heat flux by >60%. An EHO induced filament was also observed by the gas puff imaging diagnostic. The toroidal rotating filaments could change the edge magnetic topology resulting in toroidal rotating strike point splitting and heat flux broadening. Finally, experimental result of the counter current rotation of strike points splitting is consistent with the counter-current EHO.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ELM-free and inter-ELM divertor heat flux broadening induced by Edge Harmonics Oscillation in NSTX

A new n=1 dominated Edge Harmonic Oscillation (EHO) has been found in NSTX. The new EHO, rotating toroidally in the counter-current direction and the opposite direction of the neutral beam, was observed during certain inter-ELM and ELM-free periods of H-mode operation. This EHO is associated with a significant broadening of the integral heat flux width (?_int) by up to 150%, and a decrease in the divertor peak heat flux by >60%. An EHO induced filament was also observed by the gas puff imaging diagnostic. The toroidal rotating filaments could change the edge magnetic topology resulting in toroidal rotating strike point splitting and heat flux broadening. Experimental result of the counter current rotation of strike points splitting is consistent with the counter-current EHO.

Divertor heat flux width↗

Understanding the negative triangularity ELM trigger and ELM free state on DIII-D with ECE-imaging

Here, the Electron Cyclotron Emission Imaging (ECEI) diagnostic was used to observe a finite-n interchange mode structure in the edge of negative triangularity shaped plasmas on DIII-D. At a small negative triangularity (δ u = -0.2), the plasma is in the H-mode with ELMs that are triggered by a low-n interchange mode. At a larger negative triangularity (δ u = -0.4) and low NBI power (2 MW), a dithering oscillation is observed that is triggered by a low-n interchange mode, whereas at higher NBI power (>2 MW), the edge reverts to L-mode and the low-n interchange mode is present continuously. In all cases, the edge pressure gradient is clamped when the interchange mode is present. It is concluded that the low-n interchange mode prevents the plasma from transitioning to H-mode at a large negative triangularity. This agrees with linear BOUT++ simulations which suggest that the interchange-type MHD can be a resistive ballooning mode whereby resistivity can significantly increase the finite-n ballooning mode growth rate. The absence of H-mode at large negative triangularity can, thus, be explained by the excitation of low-n pressure driven resistive ballooning modes in the plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Demonstration of ELM pacing by Pellet Injection on DIII-D and Extrapolation to ITER

Demonstration of ELM pacing by pellet injection on DIII-D and extrapolation to ITER<#_ftn1>* L.R. Baylor1, N. Commaux1, T.C. Jernigan1, P.B. Parks2, T.E. Evans2, T.H. Osborne2, E.J. Strait2, M.E. Fenstermacher3, C.J. Lasnier3, R.A. Moyer4, J.H. Yu4 1Oak Ridge National Laboratory, Oak Ridge, TN, USA 2General Atomics, San Diego, CA, USA 3 Lawrence Livermore National Laboratory, Livermore, CA, USA 4University of California San Diego, La Jolla, CA, USA Deuterium pellet injection has been used in experiments on the DIII-D tokamak to investigate the possibility of triggering small rapid edge localized modes (ELMs) in reactor relevant plasma regimes. ELMs have been observed to be triggered from small 1.8 mm pellets injected from all available locations and under all H-mode operating scenarios in DIII-D. Experimental details have shown that the ELMs are triggered before the pellets reach the top of the H-mode pedestal, implying that very small shallow penetrating pellets are sufficient to trigger ELMs. Fast camera images of the pellet entering the plasma from the low field side show a single plasma filament becoming visible near the pellet cloud and striking the outer vessel wall within 200 ms. Additional ejected filaments are then observed to subsequently reach the wall. The plasma stored energy loss from the pellet triggered ELMs is a function of the elapsed time after a previous ELM. Pellet ELM pacing has been proposed as a method to prevent large ELMs that can damage the ITER plasma facing components [1]. A demonstration of pacing of ELMs on DIII-D was made by injecting slow 14 Hz pellets on the low field side in an ITER shape plasma with low natural ELM frequency and a normalized b of 1.8. The non-pellet discharge natural ELM frequency was ~5 Hz with ELM energy losses up to 85 kJ (>10% of total stored energy) while the case with pellets was able to demonstrate >20 Hz ELMs with an average ELM energy loss less than 22 kJ (<3% of the total). The resulting ELM frequency was larger than the pellet frequency indicating both a direct ELM trigger by each pellet and an indirect effect on the overall pedestal stability to ELMs from the multiple pellets. No increase in density or significant decrease in energy confinement with the pellets was observed. The implications of these results for possible pellet ELM pacing on ITER will be discussed. [1] P.T. Lang et al., Nucl. Fusion 44 (2004) 665.

Baylor, Larry R↗

ELM frequency enhancement and discharge modification through lithium granule injection into EAST H-modes

The injection of impurity granules into fusion research discharges can serve as a catalyst for ELM events. For sufficiently low ELM frequencies, and granule sizes above a threshold, this can result in full control of the ELM cycle, referred to as ELM pacing. For this research, we extend the investigation to conditions where the natural ELM frequency is too high for ELM pacing to be realized. Utilizing multiple sizes of lithium granules and classifying their effects by granule size, we demonstrate that ELM mitigation through frequency multiplication can be used at ELM triggering rates that nominally make ELM pacing unrealizable. We find that above a size threshold, injected granules promptly trigger ELMs and commensurately enhance the ELM frequency. Below this threshold size, injection of an individual granule does not always lead to the prompt triggering of an ELM; however, collective ablation in the edge pedestal region does enhance the ELM frequency. Furthermore, Li granules too small to individually trigger ELMs were injected into EAST H-mode discharges at frequencies up to 2.3 kHz; collectively the granules were observed to enhance the natural ELM frequency up to 620 Hz, resulting in a ~2.4 × multiplication of the natural ELM frequency and a 50% decrease of the ELM size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ELM frequency enhancement and discharge modification through lithium granule injection into EAST H-modes

The injection of impurity granules into fusion research discharges can serve as a catalyst for ELM events. For sufficiently low ELM frequencies, and granule sizes above a threshold, this can result in full control of the ELM cycle, referred to as ELM pacing. For this research, we extend the investigation to conditions where the natural ELM frequency is too high for ELM pacing to be realized. Utilizing multiple sizes of lithium granules and classifying their effects by granule size, we demonstrate that ELM mitigation through frequency multiplication can be used at ELM triggering rates that nominally make ELM pacing unrealizable. We find that above a size threshold, injected granules promptly trigger ELMs and commensurately enhance the ELM frequency . Below this threshold size, injection of an individual granule does not always lead to the prompt triggering of an ELM; however, collective ablation in the edge pedestal region does enhance the ELM frequency. Specifically, Li granules too small to individually trigger ELMs were injected into EAST H-mode discharges at frequencies up to 2.3 kHz; collectively the granules were observed to enhance the natural ELM frequency up to 620 Hz, resulting in a ~2.4x multiplication of the natural ELM frequency and a 50% decrease of the ELM size.

Granules↗

Reduction of edge localized mode intensity on DIII-D by on-demand triggering with high frequency pellet injection and implications for ITER

The injection of small deuterium pellets at high repetition rates up to 12× the natural edge localized mode (ELM) frequency has been used to trigger high-frequency ELMs in otherwise low natural ELM frequency H-mode deuterium discharges in the DIII-D tokamak [J. L. Luxon and L. G. Davis, Fusion Technol. 8, 441 (1985)]. The resulting pellet-triggered ELMs result in up to 12× lower energy and particle fluxes to the divertor than the natural ELMs. The plasma global energy confinement and density are not strongly affected by the pellet perturbations. The plasma core impurity density is strongly reduced with the application of the pellets. These experiments were performed with pellets injected from the low field side pellet in plasmas designed to match the ITER baseline configuration in shape and normalized β operation with input heating power just above the H-mode power threshold. Nonlinear MHD simulations of the injected pellets show that destabilization of ballooning modes by a local pressure perturbation is responsible for the pellet ELM triggering. This strongly reduced ELM intensity shows promise for exploitation in ITER to control ELM size while maintaining high plasma purity and performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental evidence of enhanced radial transport in small ELM regimes at DIII-D

Small/type-II edge-localized-modes (ELMs), carrying 1% of the plasma stored energy, are found to deposit only 45 ± 5% of the ELM power near the strike point, and the remaining 55 ± 5% to the far scrape-off-layer (SOL). Small ELMs spread their power over a larger area compared to type-I ELMs, where such a ratio is about 60% and 40% for near- and far-SOL regions, respectively. The larger spread is reflected in the heat flux width (λq) in the SOL for the intra-small ELMs profile of 6.0 mm, almost a factor 2 larger than that of type-I ELMs of 3.15 mm, for similar plasma conditions and magnetic configuration. At the ELM peak, the small ELMs λq is found to be up to 4 times larger than for the type-I ELMs, going from 2 to 7.9 mm, indicating enhanced radial transport in the neon-seeded small ELM scenario. Inter-ELM λqs have been also calculated at the secondary outer divertor in quasi-double-null (QDN) discharges. It is found that, on average, λq is 2.2 times larger in the high-separatrix-density small ELM regime, compared to a reference type-I ELM one. These findings are supported by small ELMs radial velocity profiles, measured at the outer midplane with a fast reciprocating probe, showing a decay length (λvr) in the SOL of 12.8 cm, which is 3.3 times larger than that for the type-I ELMs of 3.9 cm. This analysis shows that small ELMs, although attractive for future machines due to low peak heat flux and large λq, might be of concern for the larger flux to the outer wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

WRF-ELM v1.0: a regional climate model to study land–atmosphere interactions over heterogeneous land use regions

Abstract. The Energy Exascale Earth System Model (E3SM) Land Model (ELM) is a state-of-the-art land surface model that simulates the intricate interactions between the terrestrial land surface and other components of the Earth system. Originating from the Community Land Model (CLM) version 4.5, ELM has been under active development, with added new features and functionality, including plant hydraulics, radiation–topography interaction, subsurface multiphase flow, and more explicit land use and management practices. This study integrates ELM v2.1 with the Weather Research and Forecasting (WRF; WRF-ELM) model through a modified Lightweight Infrastructure for Land Atmosphere Coupling (LILAC) framework, enabling affordable high-resolution regional modeling by leveraging ELM's innovative features alongside WRF's diverse atmospheric parameterization options. This framework includes a top-level driver for variable communication between WRF and ELM and Earth System Modeling Framework (ESMF) caps for the WRF atmospheric component and ELM workflow control, encompassing initialization, execution, and finalization. Importantly, this LILAC–ESMF framework demonstrates a more modular approach compared to previous coupling efforts between WRF and land surface models. It maintains the integrity of ELM's source code structure and facilitates the transfer of future developments in ELM to WRF-ELM. To test the ability of the coupled model to capture land–atmosphere interactions over regions with a variety of land uses and land covers, we conducted high-resolution (4 km) WRF-ELM ensemble simulations over the Great Lakes region (GLR) in the summer of 2018 and systematically compared the results against observations, reanalysis data, and WRF-CTSM (WRF coupled with the Community Terrestrial Systems Model). In general, the coupled WRF-ELM model has reasonably captured the spatial distribution of surface state variables and fluxes across the GLR, particularly over the natural vegetation areas. The evaluation results provide a baseline reference for further improvements in ELM in the regional application of high-resolution weather and climate predictions. Our work serves as an example to the model development community for expanding an advanced land surface model's capability to represent fully-coupled land–atmosphere interactions at fine spatial scales. The development and release of WRF-ELM marks a significant advancement for the ELM user community, providing opportunities for fine-scale regional representation, parameter calibration in coupled mode, and examination of new schemes with atmospheric feedback.

54 ENVIRONMENTAL SCIENCES↗

Toward holistic understanding of the ITER-like resonant magnetic perturbation (RMP) ELM control on KSTAR

Here, KSTAR has clarified a set of unresolved 3D physics issues utilizing the ITER-like in-vessel, three-row, resonant magnetic perturbation (RMP) configurations. Since RMP-driven, edge-localized-modes (ELMs)-crash control elevates the divertor heat flux peak through its impact on edge plasma parameters and transport, a series of intentionally misaligned RMP configurations (IMCs) have been explored to investigate the relationship between RMP ELM control and divertor heat fluxes, while searching for an ideal IMC that could be favorable in both aspects. First of all, the contrasting influence of kink vs anti-kink phasing on the ELM-crash suppression has been articulated, demonstrating the synergistic benefit of 'kink' phasing on ELM-crash-suppression. On the other hand, the three-row IMC in the anti-kink phasing becomes more insensitive to the ELM-crashes at the sub-marginal level of RMP, consistent with theory. Meanwhile, the divertor 'wetted' area of ELM-crash-suppression gets narrower than that of ELM-crash-mitigation, suggesting that ELM-crash-mitigation remains advantageous over ELM-crash-suppression in terms of time-averaged divertor thermal loading. In comparison, based on a set of two-row IMCs, no evidence of divertor heat flux broadening was found during ELM-crash-suppression, supporting a hypothesis that the dispersal of the divertor heat flux in three-row IMCs cannot be driven by helically structured two-row RMPs alone. Among ITER-like three-rows, lower two-row RMPs have been found to be much more effective in suppressing the ELM-crashes than upper two-row RMPs. Although it is quite preliminary, the up/down asymmetric dependence of RMP coupling may be generically attributed to lower-single-null plasmas. Such a holistic understanding of RMP-driven, ELM-crash-control in KSTAR is expected not only to elucidate various subtle points in the vicinity of ELM-crash-suppression, but also to clarify the relevant divertor thermal loading issues for ITER and beyond.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of pedestal parameters and divertor heat fluxes in small ELM regimes in DIII-D

Abstract Divertor heat flux and its correlation with pedestal parameters within various small edge localized mode (ELM) regimes, including high beta poloidal, type-II and ELMs with negative triangularity H-modes were investigated in DIII-D. The parallel energy fluences of type-II and high beta poloidal small ELM regimes fall below the linear scaling with pedestal electron pressure for type-I ELMs put forward in Eich et al 2017 ( Nucl. Mater. Energy 12 84–90). The negative triangularity of H-mode ELMs follow the Eich scaling for type-I ELMs. The parallel heat flux and total heat loads to the divertor were determined using high-time resolution infrared thermography, while pedestal parameters were obtained through self-consistent kinetic equilibrium reconstructions. Linear regressions for the type-II and high beta poloidal regimes demonstrate that an equivalent 7.5 MA small ELM scenario in ITER would fall below the ~5 MJ m − 2 leading edge melting limit for tungsten (Gunn et al 2017 Nucl. Fusion 57 046025). Utilizing fast thermography, the scrape-off layer power fall-off length for both inter-ELM and intra-ELM was determined and compared to the Eich scaling with poloidal magnetic field in Eich et al (ASDEX Upgrade Team and JET EFDA Contributors 2013 Nucl. Fusion 53 093031). Except for the high beta poloidal scenario, all the small ELM regimes during both inter- and intra-ELM periods had power fall-off lengths ( λ q ) larger then would be expected from the B pol , MP − 1 scaling associated with type-I ELMs, signifying their potential in managing heat loads and offering a solution for core–edge integration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗