SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Energy spectrum of secondary electrons and fluorescent efficiency in 3914 A band, obtaining ionization cross section
We report on an observation of the broad absorption line (BAL) quasar PG 1115+080 performed with the XMM-Newton observatory. Spectral analysis reveals the second case of a relativistic X-ray-absorbing outflow in a BAL quasar. The first case was revealed in a recent observation of APM 08279+5255 with the Chandra X-Ray Observatory. As in the case of APM 08279+5255, the observed flux of PG 1115+080 is greatly magnified by gravitational lensing. The relatively high redshift (z=1.72) of the quasar places the redshifted energies of resonant absorption features in a sensitive portion of the XMM- Newton spectral response. The spectrum indicates the presence of complex low-energy absorption in the 0.2-0.6 keV observed energy band and high-energy absorption in the 2-5 keV observed energy band. The high-energy absorption is best modeled by two Gaussian absorption lines with rest-frame energies of 7.4 and 9.5 keV. Assuming that these two lines axe produced by resonant absorption due to Fe XXV, we infer that the X-ray absorbers are outflowing with velocities of approx. 0.10c and approx. 0.34c respectively. We have detected significant variability of the energies and widths of the X-ray BALs in PG 1115+080 and APM 08279+5255 over timescales of 19 and 1.8 weeks (proper time), respectively. The BAL variability observed from APM 08279+5255 supports our earlier conclusion that these absorbers are most likely launched at relatively small radii of less than 10(exp 16)(Mbh/M8)(sup 1/2) cm. A comparison of the ionization properties and column densities of the low-energy and high-energy absorbers indicates that these absorbers are likely distinct; however, higher spectral resolution is needed to confirm this result. Finally, we comment on prospects for constraining the kinematic and ionization properties of these X-ray BALs with the next generation of X-ray observatories.
The final analysis of the COMPTEL cosmic diffuse flux analysis is summarized in the accompanying figure. It shows the intensity of the cosmic diffuse flux spectrum measured jointly between the Virgo region and the South Galactic pole. This spectrum represents flux per unit solid angle over the range of 0.8 to 30 MeV. It contains the first positive measurement of the flux above 10 MeV. The spectrum merges smoothly with that measured with the EGRET instrument, starting at 30 MeV. It also merges smoothly with the latest results of the HEAO-1 measurements. However, the spectrum below is softer than the spectrum above the COMPTEL energy band. In the COMPTEL energy band there must exist a change in spectral shape as the source objects or processes change from the lower energy regime to the higher energy regime. The details of the analysis and the implications and meanings of the results are spelled out in the thesis of Dr. Cheenu Kappadath which is enclosed.
We have analyzed ROSAT Position Sensitive Proportional Counter pointed observations of the Dumbbell Nebula and find that the previously reported 'extended' X-ray emission is an instrumental electronic ghost image at the softest energy band. At slightly higher energy bands, the image of the Dumbbell is not very different from that of the white dwarf HZ43. We conclude that the X-ray emission of the Dumbbell Nebula comes from its central star. A blackbody model is fitted to the spectrum and the best-fit temperature of not greater than 136,000 +/- 10,000 K is in excellent agreement with the Zanstra temperatures.
Optical Components of spectrophotovoltaic system concentrate light from Sun and redirect short-wavelength portion of spectrum to solar cell having large gap in energy band (gallium arsenide cell). Longer-wavelength portion of spectrum passes through beam splitter to cell with smaller gap in energy band (silicon band). Available energy in Sunlight thus exploited more fully and, improvements in energy-conversion efficiency possible.
The data from a proton spectrometer flown aboard Skylab is examined. The instrument is sensitive to protons in the energy range 18 to 400 MeV. A partial failure of the spectrometer restricted spectral analysis to two energy bands, 18 to 27 MeV and 27 to 400 MeV. The directional data showed that a Gaussian angular distribution parameter of at least 70 degrees is required for the low energy band and at least 40 degrees for the high energy band. The data, integrated over angle, indicate that the AP3 model extrapolated down to 18-27 MeV is high by factors of 2 to 5 over most of the B-L space mapped. In the 27 to 400 MeV range, the AP3 model is 20 to 100 percent low at low and high values of L, and is high at medium L values in the B-L space mapped.
X-ray binaries exhibit a wide range of properties but there are few accepted methods to determine the nature of the compact object. Color-Color-Intensity diagrams have been suggested as a means of distinguishing between systems containing black holes from those containing neutron stars. However, this technique has been verified with data from only one instrument (RXTE/ASM) with a single set of X-ray colors defined using data available only in pre-determined energy bands. We test a selection of X-ray colors with a more sensitive instrument to determine the reliability of this method. We use data from the MAXI/Gas Slit Camera, which allows users to specify energy-bands. We test X-ray colors that have been previously defined in the literature as well as ones that we define specifically in this paper. A representative set of systems are used to construct Color-Color-Intensity diagrams in each set of colors to determine which are best for separating different classes. For studying individual sources certain bands are more effective than others. For a specified energy range, the separation of soft states in black hole binaries was possible only where both soft and hard colors included information from the lowest energy band. We confirm that Color-Color-Intensity diagrams can distinguish between systems containing black holes or neutron stars in all X-ray colors tested; this suggests an universality in the accretion processes governing these different classes. We suggest possible physical processes driving different classes of X-ray binaries to different locations in Color-Color-Intensity diagrams.
We have measured the decaying dust-scattered X-ray halo of Cen X-3 during its binary eclipse with the ASCA solid-state imaging spectrometer (SIS). The surface brightness profile (SBP) of the image in the low-energy band (0.5-3 keV) lies substantially above the point-spread function (PSF) of the X-ray telescope, while the SBP in the high-energy band (5-10 keV) exhibits no significant deviation. By contrast, the SBPs of Vela X-1 during its eclipse are consistent with the PSF in both the low- and high-energy bands -- strong evidence that a dust halo is indeed present in Cen X-3. Accordingly, we modeled the SBP of Cen X-3 taken from six consecutive time segments under the principal assumptions that the dust is distributed uniformly along a segment of the line of sight, the grains have a power-law size distribution, and the low-energy source flux was the same function of orbital phase before as during our observation. The best-fit set of parameters included a grain density value of 1.3 g/cu cm, substanially less than the density of 'astronomical silicate.' This result supports the idea that interstellar grains are 'fluffy' aggregates of smaller solid particles. We attribute the failure to detect a halo of Vela X-1 during its eclipse phase to extended strong circumsource absorption that probably occurred before the eclipse and allowed the halo to decay away before the observation began.
We describe the Spectroscopic Time-Resolving Observatory for Broadband Energy X-rays (STROBE-X), a probe-class mission concept that will provide an unprecedented view of the X-ray sky, performing timing and spectroscopy over both a broad energy band (0.2-30 keV) and a wide range of timescales from microseconds to years. STROBE-X comprises two narrow-field instruments and a wide field monitor. The soft or low-energy band (0.2-12 keV) is covered by an array of lightweight optics (3-m focal length) that concentrate incident photons onto small solid-state detectors with CCD-level (85-175 eV) energy resolution, 100 ns time resolution, and low background rates. This technology has been fully developed for NICER and will be scaled up to take advantage of the longer focal length of STROBE-X. The higher-energy band (2-30 keV) is covered by large-area, collimated silicon drift detectors that were developed for the European LOFT mission concept. Each instrument will provide an order of magnitude improvement in effective area over its predecessor (NICER in the soft band and RXTE in the hard band). Finally, STROBE-X offers a sensitive wide-field monitor (WFM), both to act as a trigger for pointed observations of X-ray transients and also to provide high duty-cycle, high time-resolution, and high spectral-resolution monitoring of the variable X-ray sky. The WFM will boast approximately 20 times the sensitivity of the RXTE All-Sky Monitor, enabling multi-wavelength and multi-messenger investigations with a large instantaneous field of view. This mission concept will be presented to the 2020 Decadal Survey for consideration.
X rays in the energy band 0.2-3.0 keV have been detected coming from both polar regions of Jupiter. The observations were made in 1979 and 1981 by using the imaging proportional counter and high resolution imaging detectors on the Einstein X-ray astronomy satellite. The measured flux density of approximately 0.0006/sq cm-sec at earth corresponds to an X ray luminosity of approximately 4 x 10 to the 9th W in the 0.2- to 3.0-keV energy band. The energy spectrum of the X rays is extremely soft and can be characterized by a power law with an exponent of approximately 2.3. Detector energy resolution is insufficient to distinguish a soft line spectrum from a continuum. However, the shape of the response and the observed X ray power indicate that the source of this auroral emission is not electron bremsstrahlung as on the earth, but is most probably line emission from O and S ions with energies between 0.03 and 4.0 MeV/nucleon precipitating from the outer boundary of the Io plasma torus at L approximately 8.
Nearby galaxy surveys have long classified X-ray binaries (XRBs) by the mass category of their donor stars (high-mass and low-mass). The NuSTAR (Nuclear Spectroscopic Telescope Array) observatory, which provides imaging data at E greater than 10 keV (kiloelectronvolts), has enabled the classification of extragalactic XRBs by their compact object type: neutron star (NS) or black hole (BH). We analyzed NuSTAR/Chandra/XMM-Newton observations from a NuSTAR-selected sample of 12 galaxies within 5 Mpc (megaparsecs) having stellar masses (M (sub asterisk)) 10 (sup 7-11) solar masses and star formation rates (SFRs) approximately 0.01-15 solar masses per year. We detected 128 NuSTAR sources to a sensitivity of 10 (sup 38) ergs per second. Using NuSTAR color-intensity and color-color diagrams we classified 43 of these sources as candidate NSs and 47 as candidate BHs. We further subdivide BHs by accretion states (soft, intermediate, and hard) and NSs by weak (Z/Atoll) and strong (accreting pulsar) magnetic field. Using eight normal (Milky Way-type) galaxies in the sample, we confirm the relation between the SFR and galaxy X-ray point source luminosity in the 4-25 and 12-25 keV energy bands. We also constrained galaxy X-ray point source luminosity using the relation L (sub X) equals M (sub asterisk) plus Beta SFR, finding agreement with previous work. The X-ray luminosity function (XLF) of all sources in the 4-25 and 12-25 keV energy bands matches the alpha = 1.6 slope for high-mass XRBs. We find that NS XLFs suggest a decline beginning at the Eddington limit for a 1.4 solar mass NS, whereas the BH fraction shows an approximate monotonic increase in the 4-25 and 12-25 keV energy bands. We calculate the overall ratio of BH to NS to be approximately 1 for 4-25 keV and approximately 2 for 12-25 keV.
Soft Gamma Repeaters undergo pulse profile changes in connection with the burst activity. Here we construct a comprehensive pulse profile history of SGR 1806-20 and SGR 1900+14 in different energy bands using Rossi X-ray Timing Explorer/Proportional Counter Array observations. We quantify the pulse profile evolution using the Fourier harmonic powers of profiles. Moreover, we determined the RMS pulsed count rates (PCRs) of each profile. We show that the pulse profiles SGR 1806$-$20 remain as single pulsed while those of SGR 1900+14 alter remarkable in all energy bands. Highly significant pulsations form SGR 1900+14 following August 27 and April 19 bursts enabled us to study not only decay of PCRs in different energy bands and also their correlations with one another.
Soft gamma repeaters undergo pulse profile changes in connection with their burst activity. Here we present a comprehensive pulse profile history of SGR 1806-20 and SGR 1900+14 in three energy bands using Rossi X-Ray Timing Explorer/Proportiona1 Counter Array observations performed between 1996 and 2001. Using the Fourier harmonic powers of pulse profiles, we quantify the pulse shape evolution. Moreover, we determined the rms pulsed count rates (PCRs) of each profile. We show that the pulse profiles of SGR 1806-20 remain single pulsed, showing only modest changes for most of our observing span, while those of SGR 1900+14 change remarkably in all energy bands. Highly significant pulsations from SGR 1900+ 14 following the 1998 August 27 and 2001 April 18 bursts enabled us to study not only the decay of PCRs in different energy bands but also their correlations with each other.
We report the results from measuring the phase lag and coherence function of X-ray emission from black hole candidate XTE J1550-564. These temporal X-ray properties have been recognized to be increasingly important in providing important diagnostics of the dynamics of accretion flows around black holes. For XTE J1550-564, we found significant hard lag-the X-ray variability in high-energy bands lags behind that in low-energy bands-associated both with broadband variability and quasi-periodic oscillation (QPO) . However, the situation is more complicated for the QPO: while hard lag was measured for the first harmonic of the signal, the fundamental component showed significant soft lag. Such behavior is remarkably similar to what was observed of microquasar GRS 1915+105. The phase lag evolved during the initial rising phase of the 1998 outburst. The magnitude of both the soft and hard lags of the QPO increases with X-ray flux, while the Fourier spectrum of the broadband lag varies significantly in shape. The coherence function is relatively high and roughly constant at low frequencies and begins to drop almost right after the first harmonic of the QPO. It is near unity at the beginning and decreases rapidly during the rising phase. Also observed is that the more widely separated the two energy bands are, the less the coherence function between the two. It is interesting that the coherence function increases significantly at the frequencies of the QPO and its harmonics. We discuss the implications of the results on the models proposed for black hole candidates.
Processing of some of the gamma-ray data obtained by Apollo 15 and 16 has been accomplished by analyzing count rates in three energy bands. The count rate variations in the three energy bands are due in various degrees to thorium, uranium, potassium, iron and titanium. The mapping which results from the gamma-ray count rates has an effective resolution of about two degrees. Regions of high titanium content in certain maria, the low values of iron in a zone of the central equatorial highland and the relatively low value of iron near Archimedes are noted.
We have used the Fourier cross spectra of GRO J1719-24. as obtained with BATSE, to estimate the phase lags between the X-ray flux variations in the 20-,50 and 50-100 keV energy bands as a function of Fourier frequency in the interval 0.002-0.488 Hz. Our analysis covers the entire approximately 80 day X-ray outburst of this black-hole candidate, following the first X-ray detection on 1993 September 25. The X-ray variations in the 50-100 keV band, lag those in the 20-50 keV energy band by an approximately constant phase difference of 0.072 +/- 0.010 rad in the frequency interval 0.02-0.20 Hz. The time lags of GRO J1719-24 decrease with frequency as a power law, with index 1.04 +/- 0.13 for frequencies >/= 0.01 Hz. These results are discussed together with those obtained in recent similar studies of the black-hole candidates Cyg X-1 and GRO J0422+32.
We have used the Fourier cross spectra of GRO J1719-24, obtained with BATSE, to estimate the phase lags between the X-ray flux variations in the 20 50 and 50-100 keV energy bands as a function of Fourier frequency in the interval 0.002-0.488 Hz. Our analysis covers the entire about 80 day X-ray outburst of this black hole candidate, following the first X-ray detection on 1993 September 25. The X-ray variations in the 50-100 keV band lag those in the 20-50 keV energy band by an approximately constant phase difference of 0.072 + 0.010 rad in the frequency interval 0.02-0.20 Hz. The peak phase lags in the interval 0.02-0.20 Hz are about twice those of Cyg X-1 and GRO J0422+32. These results are consistent with models for Comptonization regions composed of extended nonuniform clouds around the central source.
ZnBeO and ZnCdSeO alloys have been disclosed as materials for the improvement in performance, function, and capability of semiconductor devices. The alloys can be used alone or in combination to form active photonic layers that can emit over a range of wavelength values. Materials with both larger and smaller band gaps would allow for the fabrication of semiconductor heterostructures that have increased function in the ultraviolet (UV) region of the spectrum. ZnO is a wide band-gap material possessing good radiation-resistance properties. It is desirable to modify the energy band gap of ZnO to smaller values than that for ZnO and to larger values than that for ZnO for use in semiconductor devices. A material with band gap energy larger than that of ZnO would allow for the emission at shorter wavelengths for LED (light emitting diode) and LD (laser diode) devices, while a material with band gap energy smaller than that of ZnO would allow for emission at longer wavelengths for LED and LD devices. The amount of Be in the ZnBeO alloy system can be varied to increase the energy bandgap of ZnO to values larger than that of ZnO. The amount of Cd and Se in the ZnCdSeO alloy system can be varied to decrease the energy band gap of ZnO to values smaller than that of ZnO. Each alloy formed can be undoped or can be p-type doped using selected dopant elements, or can be n-type doped using selected dopant elements. The layers and structures formed with both the ZnBeO and ZnCdSeO semiconductor alloys - including undoped, p-type-doped, and n-type-doped types - can be used for fabricating photonic and electronic semiconductor devices for use in photonic and electronic applications. These devices can be used in LEDs, LDs, FETs (field effect transistors), PN junctions, PIN junctions, Schottky barrier diodes, UV detectors and transmitters, and transistors and transparent transistors. They also can be used in applications for lightemitting display, backlighting for displays, UV and visible transmitters and detectors, high-frequency radar, biomedical imaging, chemical compound identification, molecular identification and structure, gas sensors, imaging systems, and for the fundamental studies of atoms, molecules, gases, vapors, and solids.