Search NASA⌕ Search

SEARCH · Search NASA

Results for “Earth Entry System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Overview of Mars Sample Return – Earth Entry System Woven Roughness Heating Augmentation Test in NASA Langley’s Mach 6 Wind Tunnel

The Mars Sample Return Mission (MSR) is a planned NASA flagship mission in which a sample retrieval lander (SRL) with a rover will be flown to Mars to obtain sample tubes on the surface that were dropped by the Mars 2020 rover [1]. After obtaining the sam-ples, the rover will return and ascend back to Martian orbit onboard the Mars Ascent Vehicle (MAV). Upon return to Earth orbit, the samples will perform Entry, Descent, and Landing (EDL) with the Earth Entry Sys-tem (EES) architecture, and land in Utah. The EES vehicle will utilize a HEEET-variant as its TPS, which will be the first time a woven TPS will be used on a flagship NASA mission [2]. This TPS offers a unique challenge for Computational Fluid Dynamics (CFD) modeling of the aerothermal envi-ronment of the vehicle, as woven roughness heating augmentation has not been extensively investigated experimentally. As a result, in order to validate com-putational models for woven roughness heating aug-mentation, a wind tunnel test campaign at NASA Langley Research Center’s Mach 6 wind tunnel was performed in April of 2023. This test campaign consisted of over a hundred runs with Reynolds numbers spanning from 1-7 mil-lion 1/ft and with six separate wind tunnel models used. A second campaign with a suite of new models will be conducted in Summer 2023 as well as a cam-paign with a flat plate model, both of which are of great interest to the MSR-EES project. The data obtained from this test are extremely vital for the MSR mission, as they will validate CFD roughness heating models which will be directly used to design the TPS of the EES portion of MSR and characterize the heating environment that the entry ve-hicle will experience. Further extensions of the MSR-EES test campaign will continue to provide validation data for developing more effective computational tools.

Jonathan Cheatwood↗
NASA NTRS2024

Simulation Modeling of an Earth Entry System and Solar Radiation Pressure Module Development

Several trajectory simulation tools are used to model different phases of the Approach, Entry, Descent and Landing (AEDL) phase of NASA’s Mars Sample Return Campaign. Working towards a single simulation tool that models all AEDL phases, this project utilizes Program to Optimize Simulated Trajectories II to simulate the 72-hour exoatmospheric phase of AEDL up till the point of Earth atmospheric entry. This involves developing a new feature forPOST2 that captures the forces and moments caused by solar radiation pressure(SRP). Generalizing the vehicle geometry as a combination of primitive shapes, a generalized SRP module was created and implemented into POST2. Trajectory solutions produced by POST2 were then successfully compared against independent solutions produced by the trajectory tool 42.

Program to Optimize Simulated Trajectories II↗
NASA NTRSDate not supplied

An Overview of Combined CFD and Material Response Simulations of Arcjet Experiments in Support of the Mars Sample Return Earth Entry System

This presentation will also include a top-level overview of the CFD/material response arcjet simulation process. A discussion will be made on the best-practices for running CFD solutions of arcjet experiments including how to determine the inflow conditions for the CFD solution from the arc heater settings. The required inputs to the material response solver will be presented, as well as a discussion of how they can be extracted from the CFD solution. Grid requirements for both the CFD and material response solver will be explored.

Thermal protection↗
NASA NTRSDate not supplied

Recent Advances in the U.S. in Ablative TPS for In-situ Exploration of Giant Planets

The Decadal Survey report released [1] prioritizes Uranus as the highest priority Flagship class mission to be explored with an orbiter and a probe and it also recommended Saturn Probe under New Frontiers mission class. Thermal protection system (TPS) is essential for Uranus and Saturn probe missions. The two cardinal requirements are that it must be fail-safe and yet be mass efficient. The Decadal Survey report also pointed out the readiness of heatshield for extreme entry environment technology (HEEET) at TRL 6 for probe missions at Gas Giants. HEEET relies on 3-D weaving and is shown to be a robust and mass efficient TPS through ground testing and analysis. HEEET was matured to TRL 6 in 2019. HEEET was reported at the Ice Giant Workshop in 2019 at Marseille. Since 2019, significant advances have been made primarily because of Mars Sample Return (MSR) mission. MSR baselined 3-D Woven TPS as its heatshield for the earth entry system. MSR earth entry system (EES) requirements and the resulting heatshield/TPS requirements are most stringent of all entry missions. This is a result of backward contamination protection which classifies MSR as a “restricted class 5” mission to safeguard the accidental release of potentially hazardous Mars Sample into Earth’s atmosphere. Complex requirements for the heatshield start with micro-meteor impact tolerance followed by the requirement for steep entry to minimize the size of the impact footprint which results in extreme heating. The heatshield is part of the impact attenuation system. The EES architecture does not use a parachute and is designed to tolerate impact loads. Hence heatshield TPS selection and design becomes one of the key challenges. After completion of the HEEET technology maturation in 2019, IRAD efforts focused on assessing the 3-D Woven family of TPS to MSR EES. After nearly two years of evaluation of alternate TPS such as carbon phenolic, C-C hot structure, PICA, and 3-D woven family of TPS, a single layer 3-D woven TPS derived from the dual-layer HEEET was down selected and is currently the baseline. A new loom capable of weaving the single-layer 3-D woven preform at 80” wide has been designed, assembled and is currently on the verge of weaving the MSR EES TPS. During the HEEET maturation and the follow-on development, the single-layer TPS has been tested at extreme heating conditions. As a result, single layer TPS was recommended and evaluated during the Planetary Mission Concept Studies funded by NASA in preparation for the Decadal committee. In addition, in anticipation of Saturn mission proposals, single layer was evaluated as well. Aerocapture can reduce the trip time, also allow bigger payload fraction and in addition, it allows for the possibility of probe delivery once the spacecraft is in orbit. This can lead to obtaining both in-situ data as well as data from orbit simultaneously. Since Aerocapture depletes energy/velocity, probe delivery from orbit reduces the demand on TPS. Aerocapture was mentioned in the Decadal Study report as ready for implementation, but due to perceived risk it is not adopted by the mission designers. Establishing TPS readiness for aerocapture missions will be addressed. Going one step beyond aerocapture is aerogravity assist if fast return is the goal. Recent studies [4] looked at aerogravity assist and the TPS readiness. This talk will highlight both aerocapture and aerogravity assist from a TPS perspective. The main objective of this proposed talk is to present a comprehensive picture of the SOA TPS technology including recent developments. The talk will highlight advances in manufacturing, results from the Decadal White Papers, PMCS and other studies, and aerocapture and aerogravity assist that could play a role in the near or far term in-situ exploration.

E. Venkatapathy↗
NASA NTRS2025

Iterating on a Design – Further Developments in the Evolution of the Ballistic Limit Equations for the Mars Sample Return Project

The goal of the Mars Sample Return–Capture, Containment, and Return System Project is to retrieve samples launched from the Martian surface and return them to Earth for detailed analysis. An important part of this project is the design of the system’s micrometeoroid protection system, which protects the Earth Entry System and the collected samples during their journey back to Earth. As mission parameters and the micrometeoroid and orbital debris threat became better understood, the design of the micrometeoroid protection system evolved. A key element used in the shield development process is the ballistic limit equation, which is an equation that is used to determine whether or not a particular structural element or system will end up in a failed state as a result of a specified impact. As the design of the Earth Entry System and the micrometeoroid protection system evolved, a new set of ballistic limit equations was needed to better predict and assess the performance of developing shield system designs in anticipation of possible damage from micrometeoroid and orbital debris particle impacts. This paper provides a summary of how a set of initial BLEs were either extended or modified so that the resulting equations were better suited to new types of target configurations being considered, as well as how additional ballistic limit equations were developed where none previously existed.

William P Schonberg↗
NASA NTRSDate not supplied

State of the Art Thermal Protection Systems at NASA for Outer Planet Probes and TPS Developments in Support of Mars Sample Return Mission

In the recent NASA Planetary Science Decadal Survey (2023-2032) the committee recommended that the highest scientific priority of NASA’s robotic exploration efforts this decade should be completion of Mars Sample Return (MSR) and recommended to prioritize the Uranus Orbiter and Probe as the highest-priority new flagship missions for the next decade while Saturn Probe is one of the themes still under consideration for New Frontiers. This short course presentation will discuss relevant environments for outer planet missions and TPS materials under development at NASA and their readiness to meet mission needs. In addition the presentation will discuss the status of thermal protection system for the MSR Earth Entry System that brings the Martian samples safely through the Earth’s atmosphere.

Thermal Protection Systems↗
NASA NTRS1983

Catalytic surface effects on space thermal protection system during Earth entry of flights STS-2 through STS-5

An on going orbiter experiment catalytic surface effects experiment being conducted on the Space Shuttle is discussed. The catalytic surface effects experiment was peformed on four of the five flights of Columbia. Temperature time histories and distributions along the midfuselage and wing of the orbiter were used to determine the surface catalytic efficiency of the baseline high temperature reusable surface insulation. Correlation parameters are shown that allow the comparison of all flight data with predictions from the design and surface emittance decreased as a result of contaminants during the five flights of the Space Shuttle.

Stewart, D. A.↗
NASA NTRSDate not supplied

Preliminary Design of Robotic Control Software for Mars Sample Return - Capture, Containment, and Return System

The Mars Sample Return (MSR) campaign aims to acquire and return to Earth a set of Mars samples for investigation in terrestrial laboratories. Mars 2020 has collected an adequate number of samples and deposited them in sealed sample tubes at a designated Martian depot. Sample tubes will be placed in cylindrical containers called Orbiting Samples (OS) by the Perseverance Rover, and later brought to Earth by the Earth Return Orbiter (ERO) and the MSR - Capture, Containment, and Return System (CCRS). Robot Software (RSW) is a set of software processes for commanding and monitoring the avionics that controls robotic mechanisms designed to sterilize and install OS into Earth Entry System (EES) for return to Earth. This paper describes a preliminary design of RSW including motion modes, architecture, and finite state machine. Additionally, software engineering procedures and testing of RSW is provided. A preliminary performance analysis is presented and the paper concludes with future work and a discussion of design decisions.

MSR↗
NASA NTRS2020

ELEET- Formulating a Multi-Element, Inter-agency Error Budget for Robust Earth Entry of Returned Mars Samples

The operational segment of a potential Mars Sample Return campaign could end with final delivery of the Earth Entry System to the surface of Earth, punctuating an impressive international collaboration on multiple flight elements over many years. A comprehensive error budget approach is presented to characterize the high-dimensional technical challenge of this concept, including inputs from interdisciplinary stakeholders. Effects considered include interplanetary navigation, spacecraft attitude and maneuver control, and entry environment, culminating in figures of merit such as landing range accuracy. Broad tradespace exploration confirms some intuitions while challenging others, and a set of solutions are identified that are mutually agreeable to NASA and ESA.

Lobbia, Marcus↗
NASA NTRSDate not supplied

Case Study of Meteoroid Fluence on a Mars Sample Return Mission

This paper presents results from an analysis to assess the fluence of meteoroids on the Mars Sample Return Campaign Micrometeoroid Protection System (MMPS) and probability of damage to the Earth Entry System Thermal Protection System (TPS). Results are presented for the mission Outbound trajectory from Earth to Mars. The MEM3 meteoroid environment model was used for the assessment. Results are presented showing the reduction in fluence on cube faces and on the MMPS that can be achieved by selection of an anti-velocity orientation of the MMPS. A methodology is presented that determines the cumulative fluence on the MMPS using the MEM3 meteoroid fluxes and the spacecraft attitude profile over the trajectory. Resulting distributions of fluence over impact velocity, angle, and mass are presented. The fluence results are used to establish velocity-angle scenarios for hydrocode simulation and to assess net damage fluence to the TPS. Example tables containing Smooth Particle Hydrodynamics Code (SPHC) simulation scenarios as well as hypothetical hydrocode simulation scenarios for illustration purposes are presented. The tables present the resulting net damaging fluence to the TPS for each scenario and the total across the scenarios. Additionally, examples of CTH hydrocode simulation are included, demonstrating their use for determining critical impactor across the impactor parameter space, and damage of impactors that penetrate the MMPS.

Micrometeoroid↗
NASA NTRS2015

Thermal Protection System Mass Estimating Relationships for Blunt-Body, Earth Entry Spacecraft

System analysis and design of any entry system must balance the level fidelity for each discipline against the project timeline. One way to inject high fidelity analysis earlier in the design effort is to develop surrogate models for the high-fidelity disciplines. Surrogate models for the Thermal Protection System (TPS) are formulated as Mass Estimating Relationships (MERs). The TPS MERs are presented that predict the amount of TPS necessary for safe Earth entry for blunt-body spacecraft using simple correlations that closely match estimates from NASA's high-fidelity ablation modeling tool, the Fully Implicit Ablation and Thermal Analysis Program (FIAT). These MERs provide a first order estimate for rapid feasibility studies. There are 840 different trajectories considered in this study, and each TPS MER has a peak heating limit. MERs for the vehicle forebody include the ablators Phenolic Impregnated Carbon Ablator (PICA) and Carbon Phenolic atop Advanced Carbon-Carbon. For the aftbody, the materials are Silicone Impregnated Reusable Ceramic Ablator (SIRCA), Acusil II, SLA-561V, and LI-900. The MERs are accurate to within 14% (at one standard deviation) of FIAT prediction, and the most any MER under predicts FIAT TPS thickness is 18.7%. This work focuses on the development of these MERs, the resulting equations, model limitations, and model accuracy.

mass estimating relationship (MER)↗
NASA NTRSDate not supplied

Mars Sample Return – An Overview of the Capture, Containment and Return System

The Mars Sample Return campaign aims at bringing back soil, rock and atmospheric samples from Mars to Earth to answer key questions about Mars’ biological evolution by means of four missions. The first one, Mars 2020, landed on the red planet on February 18, 2021 and has to date collected a number of samples through the Perseverance rover. The three subsequent missions will recover the sample tubes, launch them into Mars orbit and transport them back to Earth. These missions are currently in the planning and design stages of development and represent an international effort comprising NASA, ESA and many industry partners. The work presented here provides an overview of the current design and concept of operations of the NASA-provided Capture, Containment, and Return System (CCRS), which is the payload of the ESA-provided Earth Return Orbiter (ERO). ERO will rendezvous with the orbiting samples and CCRS will capture them, contain them and robotically insert them into a capsule that will return the samples to Earth, the Earth Entry System (EES). Three days before arrival on Earth, CCRS will release the EES, which will fly through space, enter Earth’s atmosphere, descend on a well-defined trajectory and safely land at the Utah Test and Training Range. The decision to implement Mars Sample Return will not be finalized until NASA’s completion of the National Environmental Policy Act process. This document is being made available for information purposes only.

Mars Sample Return↗
NASA NTRSDate not supplied

NASA-ESA Mars Sample Return Program

NASA's Perseverance mission arrived at Jezero Crater on Mars in February 2021 and began scientific studies and acquisition of Martian samples for return to Earth by future missions, consistent with the recommendations of the U.S. science community in the previous Planetary Science Decadal Survey. NASA and ESA have established a joint Mars Sample Return (MSR) program to safely deliver these samples back to Earth, allowing researchers to use advanced scientific instrumentation that cannot be transported on robotic spacecraft and enable future studies of carefully curated samples using capabilities that have not yet been developed. The MSR architecture consists of two flight elements to follow Perseverance, the NASA-led Sample Retrieval Lander (SRL) and the ESA-led Earth Return Orbiter (ERO). The ERO is designed to orbit Mars and provide relay services for the SRL, including its ESA Sample Fetch Rover (SFR) and the NASA Mars Ascent Vehicle (MAV). The SRL deploys the SFR to retrieve Martian samples cached by the Perseverance rover and then returns the samples to the Orbiting Sample container (OS) on board the MAV using the ESA Sample Transfer Arm (STA). Independently, Perseverance could also deliver samples retained onboard to the OS. The MAV would launch and release the OS into low Mars orbit for rendezvous with the ERO. Upon successful capture of the OS in the ERO’s primary payload, the NASA Capture/Containment Return System (CCRS), the OS would be safely contained and loaded into the Earth Entry System (EES). The ERO will leave Mars orbit and release the EES on Earth approach on a ballistic reentry trajectory through the Earth's atmosphere for landing in the United States. Following return of the samples to Earth, the samples would be protected, preserved, assessed, curated, and made available to the international science community for scientific research and analysis. The NASA SRL and ESA ERO missions are expected to launch as early as 2026, with the return of Martian samples to Earth as early as 2031. MSR’s primary objective is the return of scientifically selected Mars samples for detailed investigation in terrestrial laboratories. The mission would also further inform the design of future human missions. The Mars Sample Return campaign is underway with the successful collection of several scientifically selected samples in Jezero Crater. The MSR Program is working towards a confirmation review in 2023 for the remaining flight elements.

Mars↗
NASA NTRSDate not supplied

NASA Capture, Containment, and Return System: Bringing Mars Samples to Earth

The Capture, Containment, and Return System (CCRS) project is NASA’s last step in bringing back Mars samples. CCRS will close a decades-long multi-mission and multi-agency effort to bring Mars surface samples back to Earth for scientific studies. CCRS will launch in 2027 on the European Earth Return Orbiter (ERO) spacecraft, which will provide communications relay for the Mars Sample Return ground missions, Perseverance rover and the Sample Retrieval Lander (SRL) (to be launched in 2028). The main mission for CCRS begins when the first-ever orbital planetary capture operation occurs with CCRS catching and securing the Orbiting Sample (OS)in low Mars orbit. From this point, the system will perform additional "firsts": it will autonomously contain the OS with heat-shrink-fit, sterilize the outside surface, and assemble the Earth entry capsule, named Earth Entry System (EES), in orbit around Mars using a gantry mechanism. At approximately 2.8 Lunar distances from Earth, or 3-days from entry into Earth’s atmosphere, CCRS will open its micrometeoroid shield and release the EES on a ballistic trajectory to Earth. The EES is designed to be a fully passive system that will enter the atmosphere and land without parachute at the Utah Test and Training Range (UTTR).

Mars mission, Sample return, Mission design↗