Search NASA⌕ Search

SEARCH · Search NASA

Results for “Elastic moduli”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Influence of temperature on the lattice misfit and elastic moduli of a Ni based single crystal superalloy with high volume fraction of γ′ phase

Highlights: • The variation of the lattice misfit with temperature in a Ni based single-crystal superalloy with high volume fraction of γ' phase was determined by high-temperature X-ray diffraction (HT-XRD) technique at temperatures between 25 °C and 1200 °C. • When the temperature was higher than 1100 °C, the γ' phase obviously dissolved, leading to a lower content of Mo and Re in the γ phase, and then resulted in a smaller absolute value of the lattice misfit. • The contribution of dissolution of γ′ phase to the reduction of the misfit increased with rising temperature and reached 29.5% at 1200 °C. • When the temperature exceeded 1100 °C, the difference of elastic moduli of γ and γ′ phases increased with rising temperature was attributed to the elastic modulus of γ phase decreased significantly. - Abstract: The variation of the lattice parameter with temperature in a Ni based single-crystal superalloy with high volume fraction of γ′ phase IC32 was determined by high-temperature X-ray diffraction (HT-XRD) technique at temperatures between 25 °C and 1200 °C. The effects of the temperature, especially the ultra-high temperature (beyond 1100 °C), on lattice misfit, elastic moduli, γ′ volume fraction and composition of γ, γ′ phases were investigated in this study. The results show that the absolute value of lattice misfit first increased and then decreased with increasing temperature and reached the maximum of 0.53% at 1100 °C. When the temperature was higher than 1100 °C, the γ′ precipitate obviously dissolved, leading to a lower content of Mo and Re in the γ phase, and then resulted in a smaller absolute value of lattice misfit. The contribution of dissolution of γ′ phase to the reduction of the misfit increased with rising temperature and reached 29.5% at 1200 °C. Moreover, when the temperature was above 1100 °C, the elastic moduli of the γ phase and alloy decreased significantly, while this phenomenon was not observed in the γ′ phase.

36 MATERIALS SCIENCE↗

Measurement of the Static Nonlinear Third-Order Elastic Moduli of Rocks: Problems and Applicability

The third-order elastic (TOE) model has been used to describe the widely observed nonlinear mechanical behaviors of earth materials. In addition to linear elastic constants ( λ , μ ), three nonlinear elastic moduli ( A , B , C ) are required for isotropic rocks. Contrary to previous research on dynamic TOE moduli, this study followed the protocol to measure strain and stress under uniaxial and hydrostatic compressive tests statically, which were later used to invert for the full set of TOE moduli for four standard rock types with differing pore structures of a porous oolitic limestone, quartz-rich sandstones, and a dense crystalline basalt. The applicability of the TOE model to characterize nonlinearity depends on the fulfillment of path-independence and small-strain assumptions. Using the measured static TOE moduli, the finite element model demonstrates that the stress in the vicinity of the wellbore is more amplified than the stress in the linear elastic case, which leads to a wider zone of rock failure around the wellbore. Due to the long-standing discrepancy between static and dynamic moduli, the rarely reported full set of static TOE moduli is necessary and will benefit future research in understanding the effect of rock nonlinearity on geophysical and geomechanical applications, such as long-term safe storage of CO 2 and generating process of geohazards.

58 GEOSCIENCES↗

Sound speed measurements in shock compressed cemented tungsten carbide: Evolution of elastic moduli with damage at pressures to 100 GPa

The motivation of the present study is to gain insights into the evolution of elastic properties of cemented tungsten carbides (WC) shock compressed to 100 GPa. Seven plate impact experiments—two front surface impact and five release wave overtake—are conducted to make simultaneous measurements of Hugoniot states and longitudinal sound speeds in shocked WC with 3.7wt.% cobalt binder. The sound speeds along with estimates for bulk sound speeds, obtained using the Birch–Murnaghan EoS, are analyzed to determine the elastic moduli—longitudinal, bulk, and shear—as a function of Hugoniot stress. The longitudinal and bulk sound speeds at Hugoniot states of interest are found to increase linearly with longitudinal stress. Consistent with the increase in sound speeds, the longitudinal and bulk moduli also increase with Hugoniot stress; however, the increase in longitudinal modulus is modest when compared to predictions of theoretical models that account for pressure and temperature dependence of elastic moduli, but with no damage. The shear moduli remain nearly constant at ~318 GPa over the range of Hugoniot states investigated. These values are, however, much lower than those predicted by the Steinberg–Guinan model with no damage. Poisson’s ratio decreases initially from its ambient value of 0.208 to ~0.199 for Hugoniot stress ≤10 GPa indicating consolidation of the WC microstructure with low initial stress; however, with an increase in Hugoniot stress to ~100 GPa, Poisson’s ratio increases to ~0.317, indicating degradation of shear moduli with increasing stress. The product of density and Grüneisen parameter (ρΓ), after an initial spike, remains nearly constant for volumetric strains ≥0.07. The maximum average temperature rise is estimated to be ~286°C at the highest Hugoniot stress employed in the study.

36 MATERIALS SCIENCE↗

Difference in the behavior of the limiting elastic moduli in high-viscosity fluids with different molecular anisotropies

The experimentally detected difference in the behavior of the high- and low-frequency limiting elastic moduli in high-viscosity fluids that have almost spherical (isotropic) and elongated (anisotropic) molecules and can easily be supercooled and vitrified is discussed. This difference is shown to be related to anisotropy-tensor fluctuations. The observed characteristic temperature dependence of the relaxation time of the anisotropy tensor is explained, and the cause of the linear temperature dependence of the limiting elastic moduli in such fluids is revealed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A methodology to determine the elastic moduli of crystals by matching experimental and simulated lattice strain pole figures using discrete harmonics

Determining reliable single crystal material parameters for complex polycrystalline materials is a significant challenge for the materials community. In this work, a novel methodology for determining those parameters is outlined and successfully applied to the titanium alloy, Ti-6Al-4V. Utilizing the results from a lattice strain pole figure experiment conducted at the Cornell High Energy Synchrotron Source, an iterative approach is used to optimize the single crystal elastic moduli by comparing experimental and simulated lattice strain pole figures at discrete load steps during a uniaxial tensile test. Due to the large number of unique measurements taken during the experiments, comparisons were made by using the discrete spherical harmonic modes of both the experimental and simulated lattice strain pole figures, allowing the complete pole figures to be used to determine the single crystal elastic moduli. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Wielewski, Euan↗

Mechanically tunable conductive interpenetrating network hydrogels that mimic the elastic moduli of biological tissue

Conductive and stretchable materials that match the elastic moduli of biological tissue (0.5–500 kPa) are desired for enhanced interfacial and mechanical stability. Compared with inorganic and dry polymeric conductors, hydrogels made with conducting polymers are promising soft electrode materials due to their high water content. Nevertheless, most conducting polymer-based hydrogels sacrifice electronic performance to obtain useful mechanical properties. Here we report a method that overcomes this limitation using two interpenetrating hydrogel networks, one of which is formed by the gelation of the conducting polymer PEDOT:PSS. Due to the connectivity of the PEDOT:PSS network, conductivities up to 23 S m-1 are achieved, a record for stretchable PEDOT:PSS-based hydrogels. Meanwhile, the low concentration of PEDOT:PSS enables orthogonal control over the composite mechanical properties using a secondary polymer network. We demonstrate tunability of the elastic modulus over three biologically relevant orders of magnitude without compromising stretchability ( > 100%) or conductivity ( > 10 S m-1 ).

36 MATERIALS SCIENCE↗

Evolution of elastic moduli through a two-dimensional structural transformation

We use a classical analytical and separable elastic energy landscape describing SnO monolayers to estimate the softening of elastic moduli through a mechanical instability occurring at finite temperature in this material. Although not strictly applicable to this material due to its low-energy barrier J that leads to a quantum paraelastic phase, the present exercise is relevant as it establishes a conceptual procedure to estimate such moduli straight from a two-dimensional elastic energy landscape. As additional support for the existence of a quantum paraelastic phase, we carry a qualitative WKB analysis to estimate escape times from an individual well on the landscape; escape times increase exponentially with the height of the barrier J. We also provide arguments against an additional transformation onto a planar lattice due to its high-energy cost. These results continue to establish a case for the usefulness of soft matter concepts in two-dimensional materials, and of the potential lurking of quantum effects into soft matter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic moduli of high-density, sintered monoliths of yttrium dihydride

Yttrium dihydride has been considered as potential nuclear reactor moderator for micro-reactors operating in the thermal energy spectrum due to their ability to retain hydrogen to high temperatures while having a relatively low impact on neutron economy. Despite these advantages, it is difficult to prepare yttrium dihydride in high-density, near net-shape monoliths for moderator applications due to volume expansion upon hydriding and the pyrophoric nature of the material. In this work, high-density monoliths of yttrium dihydride were prepared by direct hydriding and using powder metallurgical methods. Resonant ultrasound spectroscopy was used to measure the elastic moduli of the sintered monoliths, while nanoindentation was used to determine the Young’s modulus and hardness of the directly-hydrided yttrium and the sintered monoliths. Single crystal elastic constants and related properties of yttrium dihydride were also determined using density functional theory (DFT) for comparison. We report mechanical properties of materials produced by both methods were observed to be consistent with the values from literature for yttrium dihydride. Due to the novelty of producing yttrium dihydride by powder metallurgy, this result indicated that the monoliths produced by powder metallurgy were of high quality. To that end, powder metallurgy is believed to be a viable method for large-scale production of yttrium dihydride monoliths for nuclear reactor moderator applications.

36 MATERIALS SCIENCE↗

Elastic moduli of δ-Pu 239 reveal aging in real time

We study the time evolution (aging) of the elastic moduli of an eight-year-old polycrystalline δ- Pu 2.0 at % Ga alloy (δ-Pu:Ga ) from 295K to nearly 500K in real time using Resonant Ultrasound Spectroscopy (RUS). After 8 years of aging at 295K, the bulk and shear moduli increase at a normalized rate of 0.2%/year and 0.6%/year respectively. As the temperature is raised, two time dependences are observed, an exponential one of about a week, followed by a linear one (constant rate). The linear rate is thermally activated with an activation energy of 0.33+0.06 eV. Above 420K a qualitative change in the time evolution is observed; the bulk modulus decreases with time while the shear modulus continues to stiffen. No change is observed as the α-β transition temperature is crossed as would be expected if a decomposition of δ-Pu:Ga to α-Pu and Pu 3 Ga occurred over the temperature range studied. Our results indicate that the main mechanism of aging is creation of defects that are partially annealed starting at T = 420 K.

36 MATERIALS SCIENCE↗

Computation of graphene elastic moduli at low temperature

Finding the values of parameters for the simplest Mie’s family potentials is performed in order to estimate elastic moduli of graphene monolayers using lattice statics approach. The coincidence criterion of the experimentally determined Poisson’s ratio with the estimated value is taken in order to select dimensionless power parameters of the Mie-type potential. It allowed obtaining more precise estimation of elastic properties in comparison with variety of other potentials for carbon atoms in graphene monolayer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elastic moduli of precompressed pyrophyllite used in ultrahigh pressure research

The propagation of ultrasonic pulses in pyrophyllite specimens was studied to determine the effect of specimen precompression on the measured elastic moduli. Measurements were made at room pressure and, for the precompressed specimens, to pressures of 3 kbar. Pyrophyllite was found to be elastically anisotropic, apparently the result of the fabric present in our material. The room pressure adiabatic bulk modulus as measured on specimens made of isostatically compacted powered pyrophyllite was determined to be 96.1 kbar. The wave speeds of ultrasonic pulses in pyrophyllite were found to decrease with increasing specimen precompression. A limiting value of precompression was found, above which no further decrease in wave speed was observed. For the shear wave speeds this occurs at 10 kbar while for the longitudinal wave at 25 kbar. In the limit, the shear waves propagate 20% slower than in the unprecompressed samples; for the longitudinal wave the difference is 30%.

Sachse, W.↗

A Statistical Learning Framework for Materials Science: Application to Elastic Moduli of k -nary Inorganic Polycrystalline Compounds

Materials scientists increasingly employ machine or statistical learning (SL) techniques to accelerate materials discovery and design. Such pursuits benefit from pooling training data across, and thus being able to generalize predictions over, k -nary compounds of diverse chemistries and structures. This work presents a SL framework that addresses challenges in materials science applications, where datasets are diverse but of modest size, and extreme values are often of interest. Our advances include the application of power or Hölder means to construct descriptors that generalize over chemistry and crystal structure, and the incorporation of multivariate local regression within a gradient boosting framework. The approach is demonstrated by developing SL models to predict bulk and shear moduli (K and G, respectively) for polycrystalline inorganic compounds, using 1,940 compounds from a growing database of calculated elastic moduli for metals, semiconductors and insulators. The usefulness of the models is illustrated by screening for superhard materials.

36 MATERIALS SCIENCE↗

Radiation-damage-induced transitions in zircon: Percolation theory applied to hardness and elastic moduli as a function of density

Two in literature predicted percolation transitions in radiation-damaged zircon (ZrSiO 4 ) were observed experimentally by measurement of the indentation hardness as a function of density and their correlation with the elastic moduli. Percolations occur near 30% and 70% amorphous fractions, where hardness deviates from its linear correlation with the elastic modulus ( E ), the shear modulus ( G ) and the bulk modulus ( K ). Finally, the first percolation point p c1 generates a cusp in the hardness versus density evolution, while the second percolation point is seen as a change of slope.

36 MATERIALS SCIENCE↗

Correlations between elastic moduli and molar volume in metallic glasses

We report clear correlations between bulk modulus (K) and average molar volume V{sub m}, and between Poisson's ratio {nu} and V{sub m} for various bulk metallic glasses. The origin for the correlations between elastic moduli and V{sub m} are discussed. The established correlation, associated with Poisson's ratio {nu}, and since the {nu} correlates with plasticity of metallic glasses, indicates that the average molar volume is important factor to be considered for plastic metallic glasses searching. The found correlations also suggest a close relation between the mechanical properties and the short-range atomic bonding, and assist in understanding deformation behavior in metallic glasses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗