Search NASA⌕ Search

SEARCH · Search NASA

Results for “End of life”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Recycling Silicon Bottom Cells from End-of-Life Perovskite–Silicon Tandem Solar Cells

Perovskite-silicon tandem cells have shown much higher efficiencies than the single junction cells, which promises further reduction of energy cost from photovoltaics. Due to the protection by perovskites, silicon subcells in perovskite-silicon tandem cells may last much longer than they are designed for single junction devices. Here we report recycling silicon bottom cells from end-of-life perovskite-silicon tandem solar cells which further reduce their cost and enhance the sustainability. We demonstrate that silicon bottom cells can be recycled from end-oflife tandem cells by thermal delamination and chemical cleaning processes. The optoelectronic properties of silicon bottom cells were shown largely unchanged at the end-of-life tandem cells. The tandem cells refurbished from recycled silicon bottom cells show comparable efficiencies with those fabricated from fresh ones.

14 SOLAR ENERGY↗
DOE OSTI2026

Direct electrode-to-electrode regeneration of end-of-life batteries via electrode–electrolyte interphase dissolution

Lithium-ion battery recycling remains constrained by processes that recover metals at the expense of electrode integrity, while even direct recycling typically requires shredding to black mass followed by binder removal, separation, and full electrode refabrication. Here, we introduce direct electrode-to-electrode regeneration (DEER), a simultaneous electrochemical regeneration of used NMC and graphite electrodes from end-of-life batteries in their intact form by dissolving the passivating electrode–electrolyte interphase (EEI). DEER employs 1,3-dimethyl-2-imidazolidinone (DMI), a high donor number solvent that creates a thermodynamic environment favorable for solubilizing redox inactive EEI components. DEER dissolves the thick EEI on both used electrodes while preserving electrode integrity, enabling up to 95% capacity regain and improved cycling stability with a residual LiF-rich interphase. Operando Raman, operando IR, and post-mortem NMR directly track the electrochemically driven dissolution of carbonate-derived EEI species in the used DMI-based recycling electrolyte. Technoeconomic and life-cycle analyses show that DEER reduces the cost of recycled cell manufacturing by 56% relative to pyro- and hydrometallurgy, while lowering energy use and greenhouse gas emissions. Overall, DEER establishes the first validated pathway to directly regenerate and reuse electrodes harvested from truly end-of-life batteries, converting the key interfacial bottleneck into a controllable dissolution process and opening a practical route toward electrode level circularity.

Kim, Kiwon [Cornell Univ., Ithaca, NY (United Stat↗
DOE OSTI2023

Mobile Hot Cell Digital Twin: End-of-life Management of Disused High Activity Radioactive Sources

Sealed radioactive sources are used in various settings such as nuclear facilities, universities, hospitals, and industry. When these sources reach the end of their lifespan, they become waste and are recaptured and stored long-term. A digital twin can be used in the design of a solution for recapturing spent sources, offering benefits in deployment time, operator safety, and cost reduction. We propose a digital twin framework for managing the end-of-life process of disused high activity radioactive sources and have created a prototype implementation to demonstrate its feasibility.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2024

Direct Recycling of End-of-Life Cathode Material Through Redox Chemistry Mediators

Lithium-ion batteries (LIBs) are ideal for electric vehicles and electronic devices because of their high-power density and outstanding cycle life. The need for recycled LIBs material is pivotal for the sustainability of the renewable energy industry. The recycling process needs to be both economically and environmentally conscious. Direct recycling is cheaper and generates the least amount of waste compared to pyrometallurgical and hydrometallurgical processes. Direct recycling explored in this work is useful for reclaiming precious minerals from the End-of-Life (EOL) LIBs material. The EOL material has varying lithium deficiency, hence, redox mediator relithiation restores the lithium content rapidly and at low cost. The redox mechanism relithiate EOL cathode material by shuttling charges very fast between lithium metal and EOL cathode material. The redox mediator is oxidized to create lithium rich solvent and reduced to relithiate EOL cathode material. However, the process is sensitive to pH changes. The redox reaction creates acidic solvent, which may cause lithium leaching. Therefore, use of lithium hydroxide (LiOH) to remove impurities on the surface of the EOL material and as a lithium source creates a basic solution to prevent lithium leaching and relithiate EOL material. This approach will potentially pave way for fast quality cathode material recovery at a low cost.

cathode material↗
DOE OSTI2024

Design and Optimization of Processes for Recovering Rare Earth Elements from End-of-Life Hard Disk Drives

In this conference paper, we propose a superstructure-based approach to finding the optimal pathways for recovering rare earth elements in their commercialized rare earth oxide form from end-of-life HDDs. The proposed superstructure was modeled as a MILP optimization problem, selecting the net present value as the objective function. Whenever possible, costing data taken from the literature was used to inform this mode. However, due to the novelty of this research area data were often not available thus requiring the generation of flowsheets that were implemented in Aspen Plus. To establish the base case optimal result, projections for the number of EOL HDDs in the U.S. available for recycling and estimates of the projected rare earth oxide prices over the lifetime of the plant were used to inform the model. The model was then expanded to include the recycling of EOL HDDs generated prior to the beginning of plant production (period ranging from 2006 through 2024).

Laliwala, Chris↗
DOE OSTI2024

Recycling Rare Earth Elements from End-of-Life Electric and Hybrid Electric Vehicle Motors

In this paper, we propose a superstructure-based approach to finding the optimal pathways for recovering rare earth elements in their commercialized rare earth oxide form from end-of-life EV and HEV motors. The proposed superstructure was modeled as a MILP optimization problem, selecting the net present value as the objective function. Whenever possible, costing data taken from the literature was used to inform this mode. However, due to the novelty of this research area data were often not available thus requiring the generation of flowsheets that were implemented in Aspen Plus.

Laliwala, Chris↗
DOE OSTI2021

Exploring PV Circularity by Modeling Socio-Technical Dynamics of Modules’ End-of-Life Management

The circular economy (CE) tackles environmental and resource scarcity issues by maximizing value retention in the economy. The concept implies design strategies such as reducing the use of materials or improving products’ durability and end-of-life (EOL) strategies, for example, reusing products and components and recycling materials. With an estimated 80 million tons of global cumulative EOL photovoltaic (PV) modules, applying CE principles to the PV industry could alleviate resource scarcity issues while also providing economic benefits. However, transitioning to a CE may imply changes in organizations and consumer behaviors. In this context, assessment of CE strategies may require accounting for behavioral change, a requirement that methods from complex system science such as agent-based modeling meet. Thus, this paper uses an agent-based modeling (ABM) approach to study circularity in the photovoltaics supply chain. Four types of agents are represented in the ABM: PV owners, installers, recyclers, and manufacturers. Moreover, five possible EOL options – including three CE strategies – are modeled. Departing from traditional techno-economic analysis, the model includes techno-economic factors as well as social factors to model EOL management decisions. Results show that each dollar decrease in the recycling fees improves the recycling rate by roughly 1.1%. However, excluding social factors underestimates the effect that lower recycling prices have on material circularity.

agent-based modeling↗
DOE OSTI2021

Exploring PV Circularity by Modeling Socio-Technical Dynamics of Modules' End-of-Life Management: Preprint

The circular economy (CE) tackles environmental and resource scarcity issues by maximizing value retention in the economy. The concept implies design strategies such as reducing the use of materials or improving products’ durability and end-of-life (EOL) strategies such as reusing products and components and recycling materials. With an estimated 80 million tons of global cumulative EOL photovoltaic (PV) modules, applying CE principles to the PV industry could alleviate resource scarcity issues while also providing economic benefits. However, transitioning to a CE may imply changes in organizations and consumer behaviors. In this context, assessment of CE strategies may require accounting for behavioral change, a requirement that methods from complex system science such as agent-based modeling meet. Thus, this paper uses an agent-based modeling (ABM) approach to study circularity in the photovoltaics supply chain. Four types of agents are represented in the ABM: PV owners, installers, recyclers, and manufacturers. Moreover, five possible EOL options – including three CE strategies – are modeled. Departing from traditional techno-economic analysis, the model includes techno-economic factors as well as social factors to model EOL management decisions. Results show that each dollar decrease in the recycling fees improves the recycling rate by roughly 1.1%. However, excluding social factors underestimates the effect that lower recycling prices have on material circularity.

28 EE - Advanced Manufacturing Office (EE-5A)↗
DOE OSTI2025

Cost‐Effective and Scalable Approach for the Separation and Direct Cathode Recovery from End‐of‐Life Li‐Ion Batteries

Li-ion battery recycling presents a promising opportunity to decrease dependence on foreign sources of materials and harvest precious materials within the United States. Herein, a superior complete direct recycling process on individual end-of-life cells is reported where the recovered high-purity cathode active material, as well as electrolyte salt Li hexafluorophosphate (LiPF 6 ) can be reused without significant processing. This new process utilizes a series of mechanical separation steps that enable the separation of the cathode and anode active materials while they are still attached to their current collectors. Using this type of process can significantly reduce metal contamination and enable a clean cathode that can be directly recycled. The process if implemented commercially can greatly reduce the environmental burden of batteries as the greenhouse gas emissions of 8.25 kg CO 2 e kg −1 from the direct recycling process are 64% lower compared to those from virgin production of cathode material. During electrochemical testing of the recovered LiNi 0.6 Mn 0.2 Co 0.2 O 2 a discharge capacity of ≈160 mAh g −1 and good cyclability of over 250 cycles at 0.33C are achieved. This success paves a new pathway to explore and optimize existing Li-ion battery recycling procedures.

electrolyte reuse↗
DOE OSTI2024

Recycling Rare Earth Elements From End-of-Life Electric and Hybrid Electric Vehicle Motors

In this presentation, we first provide context on the increasing demand for rare earth elements and the current state of rare earth element mining worldwide. We then justify our decision to choose end-of-life electric and hybrid electric vehicles as a feedstock and propose a superstructure-based approach to finding the optimal pathways for recovering rare earth elements in their commercialized rare earth oxide form from them.

Laliwala, Chris↗
DOE OSTI2022

Regional Representation of Wind Stakeholders' End-of-Life Behaviors and Their Impact on Wind Blade Circularity

Wind plant power has seen tremendous growth in the US and worldwide, representing the most significant renewable energy installed capacity besides hydropower. While wind power enables decarbonizing the electricity grid, the rising amount of end-of-life (EOL) wind blades - which are arduous to recycle - present a challenge for landfills if disposed of whole and a missed opportunity to recover valuable composite materials. The circular economy (CE) concept proposes strategies to rethink, reuse and recover products, components, and materials. However, transitioning to a CE implies changing how business models, supply chains, and behaviors deal with products and waste; changes arduously captured with traditional methods used to assess circularity such as life cycle assessment or material flow analysis (MFA). Here we present an agent-based model (ABM) that captures behavioral aspects impacting wind blade circularity in the US. The ABM also accounts for wind plant projects and landfills heterogeneity - a characteristic not easily included in top-down approaches such as MFA, input-output analysis, or system dynamics. Results show that recycling is divided as most recycling facilities are on the eastern side of the country, a challenge that could be alleviated by shredding blades before transportation. Recycling programs from the wind industry could also seed recycling behaviors within wind plant owners. Better yet, new blade designs could increase circularity if original equipment manufacturers accept the risks involved with the investments needed to adapt the production lines.

17 WIND ENERGY↗
DOE OSTI2022

Performance Advantaged ..beta..-Ketone Containing Polymers - Benefits in Manufacturing, Performance, and End-of-Life

Biomass derived chemicals can possess extended functionality, often in the form of heteroatoms like oxygen and nitrogen, that can enable performance advantaged properties in emergent materials. These performance advantages can manifest in multiple ways such as reduced manufacturing intensity, better performance, or enhanced end-of-life options. One illustrative example of this concept is ..beta..-ketoadipic acid (..beta..KA), a C6 dicarboxylic acid with a ketone in its backbone. ..beta..KA can be obtained via biological cultivation from aromatic compounds, sugars, and even waste plastics. When ..beta..KA is implemented into polymers, namely nylons, in place of adipic acid the overall material properties are increased. Specifically, the glass transition temperature (which is the measurement at which temperature a plastic softens) is increased by 69 degrees C and the water permeability is reduced by 20%. Molecular dynamic (MD) simulations reveal that the ..beta..-ketone in ..beta..KA leads to restricted movement across multiple backbone carbons when compared to adipic acid. Furthermore, MD simulations reveal that the ..beta..-ketone, when compared to no-ketone or an a-ketone, can lead to an increase in hydrogen bonding between neighboring chains. Both phenomena may help explain the molecular origin of the increases in polymer performance. When implemented into polyesters, namely PET, ..beta..KA can maintain the requisite performance while enabling enhanced degradation. Aside from performance advantages in thermomechanical performance, the production of ..beta..KA also is advantaged in its manufacturing. Although estimates for the minimum selling price (MSP) of ..beta..KA exceed adipic acid the manufacture of ..beta..KAwould reduce supply chain energy and GHG emissions by >50% and >30% respectively. Further TEA analysis reveals that the MSP of ..beta..KA is primarily driven by the feedstock cost while the capital expenditures are driven largely by fermentation costs. Overall, the work presented within will be illustrative of how biomass derived molecules, namely ..beta..KA, can manifest performance advantages across multiple benchmarks and may enable a path to market for biomass-derived materials.

ADVANCED PROPULSION SYSTEMS,BIOMASS FUELS↗
DOE OSTI2024

Design and Optimization of Processes for Recovering Rare Earth Elements from End-of-Life Hard Disk Drives

In this poster, we first provide motivation for why rare earth elements as rare earth permanent magnets (REPM) are increasing in demand. We then highlight some of the recent work that has been done by several national labs (National Renewable Energy Laboratory (NREL), Environmental Protection Agency (EPA), Critical Minerals Institute (CMI)) on recycling rare earth elements from end-of-life hard disk drives (EOL). Then, we mention our long-term plan to design a feedstock agnostic process to recover rare earth elements as rare earth oxides from many different EOL products at once. Next, we discuss how we quantified the rare earth elements available for recycling from EOL hard disk drives from consumer desktops and laptops. We then discuss how we used superstructure optimization to design the optimal pathway. The proposed superstructure was modeled as a MILP optimization problem, selecting the net present value as the objective function. Costing data from the literature was used to inform this model whenever possible. However, due to the novelty of this research area, data were often unavailable, thus requiring the generation of flowsheets implemented in Aspen Plus.

Laliwala, Chris↗
DOE OSTI2020

Activation Energy for End-of-Life Solder Bond Degradation: Thermal Cycling of Field-Aged PV Modules

The longevity of solar photovoltaic modules depends on the durability and reliability of their components, one of which is the solder bonds in interconnect ribbons. The solder joints experience stresses from thermal cycling and constant elevated temperatures (40 °C-70 °C) in regular field operation leading to thermo-mechanical fatigue and intermetallic compound formation. To study the end-of-life wear-out mechanisms and to obtain activation energy of solder bond degradation, here two field-aged modules from Arizona-a 21-year-old Solarex MSX60 module (with Sn62Pb36Ag2 at the solder joints) and an 18-year-old Siemens M55 module (with Sn60Pb40 at the solder joints)-underwent 800 and 400 modified thermal cycles, respectively. Using three heating blankets, each module had three temperature zones maintained at 85, 95, and 105 °C during the 15-min hot dwell time of the thermal cycle. Cell-level series resistance data obtained from three temperature zones enabled the calculation of activation energy for solder bond degradation for the MSX60 and the M55 modules to be 0.12 eV and 0.35 eV, respectively. From each temperature zone in both modules, busbar-solder samples were obtained, imaged through SEM, and analyzed with energy-dispersive X-ray spectroscopy. In the MSX60 module with traces of Ag in the solder material, phase segregation and growth were primarily observed at high temperatures. For M55 modules without Ag in the solder material, major phase segregation was observed in all temperature zones. The IMC thickness for both modules increased with increasing module temperature. The beneficial effect of Ag in solder material on mitigating solder bond degradation is presented.

14 SOLAR ENERGY↗
DOE OSTI2022

A generic scenario analysis of end-of-life plastic management: Chemical additives

Plastic growing demand and the increment in global plastics production have raised the number of spent plastics, out of which over 90% are either landfilled or incinerated. Both methods for handling spent plastics are susceptible to releasing toxic substances, damaging air, water, soil, organisms, and public health. Improvements to the existing infrastructure for plastics management are needed to limit chemical additive release and exposure resulting from the end-of-life (EoL) stage. This article analyzes the current plastic waste management infrastructure and identifies chemical additive releases through a material flow analysis. Additionally, we performed a facility-level generic scenario analysis of the current U.S. EoL stage of plastic additives to track and estimate their potential migration, releases, and occupational exposure. Potential scenarios were analyzed through sensitivity analysis to examine the merit of increasing recycling rates, using chemical recycling, and implementing additive extraction post-recycling. Our analyses identified that the current state of plastic EoL management possesses high mass flow intensity toward incineration and landfilling. Although maximizing the plastic recycling rate is a reasonably straightforward goal for enhancing material circularity, the conventional mechanical recycling method requires improvement because major chemical additive release and contamination routes act as obstacles to achieving high-quality plastics for future reuse and should be mitigated through chemical recycling and additive extraction. In conclusion, the potential hazards and risks identified in this research create an opportunity to design a safer closed-loop plastic recycling infrastructure to handle additives strategically and support sustainable materials management efforts to transform the US plastic economy from linear to circular.

54 ENVIRONMENTAL SCIENCES↗