Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ethane dehydrogenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Identifying factors controlling the selective ethane dehydrogenation on Pt-based catalysts from DFT based micro-kinetic modeling

Herein, a detailed EDH reaction mechanism on Pt(111), Pt(211), Pt 3 Sn(111) and Pt 3 Sn(211) surfaces has been systematically computed with DFT. A mean-field micro-kinetic model has been established to simulate the product distribution and selectivity on each surface at experimentally relevant conditions. We have uncovered a number of different factors controlling the catalytic performance of Pt-based EDH catalysts, thus leading to a better understanding of experimentally detected phenomenon. In this study, the (111) and (211) model surfaces of Pt and Pt 3 Sn catalysts were chosen to represent the terrace and step-edge sites when simulating the EDH reaction mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalytic Dehydrogenation of Ethane over Mn Oxide Supported on Zeolite Chabazite

A new class of Mn-containing zeolites prepared by incipient wetness impregnation (IWI) have been found to catalyze the ethane dehydrogenation reaction with high selectivity (98 %+). Preparation by IWI leads to the formation of Mn 2 O 3 nanoparticles on the external surface of the zeolite crystals and herein is shown that the primary active sites for the reaction are located on the surface of these particles. Propane dehydrogenation is also successfully catalyzed by this catalyst. Furthermore, other Mn-zeolites (MFI and BEA) also have high reactivity and selectivity towards light alkane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CO 2 -assisted ethane oxidative dehydrogenation over MoO x catalysts supported on reducible CeO 2 –TiO 2

Supported MoO x on mixed CeO 2 –TiO 2 was investigated for the oxidative dehydrogenation of ethane (ODHE) using CO 2 as a mild oxidant. Raman spectroscopic characterization of the synthesized catalysts under dehydrated conditions suggested that surface MoO x species prefer to anchor on the crystalline domains of TiO 2 . Upon increasing the amount of CeO 2 in the mixed oxide support, significant spectral changes were observed, especially in the ~900–950 cm –1 region where Mo–O–M bonds are expected. The catalytic behaviors of Mo as opposed to pure support materials were distinct. As the ceria content in the support increased, MoO x catalysts promoted oxidative dehydrogenation pathways via the Mars–van Krevelen mechanism, while pure supports appeared to favor ethane direct dehydrogenation. Investigation of structure–function relationships via in situ Raman spectroscopic efforts revealed that adding ceria not only changed the redox properties of the support but also improved those of the deposited amorphous MoO x species. We also show that upon incorporation of ceria into the support, CO 2 directly participates in the reoxidation of the dispersed MoO x species during catalysis. Here, this effect was distinct from the participation of CO 2 in the reverse water gas shift reaction. Operando Raman spectra revealed that the presence of CO 2 prolonged the existence of the 930 cm –1 feature which appears to correlate well with the relative contribution of the oxidative versus non-oxidative pathway in ethane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Autothermal Chemical Looping Oxidative Dehydrogenation of Ethane: Redox Catalyst Performance, Longevity, and Process Analysis

Energy-efficient upgrading of stranded ethane from shale gas to olefins holds the promise of increasing the supply of useful chemical feedstocks while reducing flaring-based CO 2 emissions. Previously, we reported a modular ethane-to-liquids (M-ETL) system based on a chemical looping oxidative dehydrogenation (CL-ODH) scheme. In this article, we present long-term (>1200 h) results of Li 2 CO 3 -promoted La 0.8 Sr 0.2 FeO 3 corresponding to ~4125 CL-ODH cycles in a large laboratory-scale packed bed reactor. Temperature monitoring along the bed length confirmed the exothermicity of both the oxidative dehydrogenation and regeneration steps, enabling an autothermal operation. Product gas analysis indicated that the redox catalyst maintains a high C 2+ selectivity (~90%) and ethane conversion (~67%) at 735 °C after continuous cycling of >1000 h. As a result, product distributions and heats of reactions were used to update our M-ETL process model for revised techno-economic analysis, demonstrating that the current system is economically viable with relatively low required selling prices across a wide range of operating scenarios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Sr 2 Fe 2–X Mo X O 6 double perovskites as electrocatalysts for oxidative dehydrogenation of ethane: Effect of B-site stoichiometry

The oxidative dehydrogenation of ethane (ODHE) was investigated using a solid oxide electrocatalytic cell with Sr 2 Fe 2–X Mo X O 6–δ (SFM) double perovskite as the anode electrocatalyst. As shown in the XRD patterns, SFM perovskites maintained their cubic structure upon modifying the B-site ratios of Mo and Fe. Increasing the Mo content of the perovskite structure resulted in a lower water signal intensity at low temperatures in TPR profiles, indicative of moderate oxygen transport through the perovskite structure. Because Mo–O bonds are stronger than Fe–O bonds, the electrical conductivity of SFM perovskites decreased with increasing Mo content. When operated at 100 mA cm –2 , ODHE activity improved four times compared to open circuit voltage, resulting in 16.1% conversion of C 2 H 6 and 83.1% selectivity to C 2 H 4 . It has been demonstrated that oxygen ions provided by perovskite lattices were the key species involved in activating C 2 H 6 based on the in-situ DRIFTS experiments. In conclusion, the SFM perovskite with higher Mo content showed the highest conversion and selectivity due moderate oxygen ion mobility and fast desorption of C 2 H 4 .

25 ENERGY STORAGE↗
DOE OSTI2025

Impact of microkinetic modeling assumptions on predicted kinetics and mechanisms over undercoordinated sites

Accurate modeling of catalytic reactions on undercoordinated sites requires accounting for the structural and ensemble-specific nature of the active sites. This study examines how common microkinetic modeling (MKM) assumptions affect predicted kinetics and mechanisms on the stepped Pt(211) facet for the ethane dehydrogenation (EDH) and the ethane hydrogenolysis (EH). Six (211) MKMs were developed, differing in (i) the number of active sites represented, (ii) adsorbate site occupancy treatment, and (iii) inclusion of cross-facet interactions. These models are benchmarked against a particle-based microkinetic model (PB-MKM), which best represents step-edge behavior. MKM assumptions caused deviations in turnover frequencies exceeding ten orders of magnitude and led to contrasting mechanistic and selectivity predictions. Multi-site MKMs overestimate activity by inflating free site availability, single-site models underestimate activity, and uniform occupancy models overpredict coverage of multi-dentate intermediates, leading to reaction-specific artifacts. Overall, the Combined Site Edge Model (CSEM), a single-site MKM accounting for site occupancy and cross-facet interactions, most closely approximates PB-MKM predictions. All models predict similar kinetics when surfaces are clean or primarily occupied by monodentate species. This work provides practical guidance for selecting MKM frameworks for undercoordinated catalytic surfaces and highlights the critical role of modeling assumptions in catalytic predictions.

(211) facet↗
DOE OSTI2021

Molten-salt-mediated carbon dioxide capture and superequilibrium utilization with ethane oxidative dehydrogenation

Existing CO 2 -mediated oxidative dehydrogenation (CO 2 -ODH) of ethane has yet to demonstrate >60% single-pass CO yield due to the intrinsic equilibrium limitations. We report a unique approach with mixed molten carbonates as a reaction medium for CO 2 -ODH, which strategically partitions the CO 2 -ODH reactions into gas and molten-salt phases and facilitates integrated CO 2 capture from power plant flue gases. An 89% CO yield was achieved at 770°C, doubling the equilibrium limitation of conventional CO 2 -ODH. The high CO yield in turn enhances ethylene formation. Further characterizations confirmed that molten-salt mediated ODH (MM-ODH) proceeds through a gas-phase cracking and molten-salt mediated reverse water-gas-shift reaction pathway. Based on this understanding, thermodynamic analysis and ab initio molecular dynamics simulations were conducted to develop general principles to optimize the molten-salt reaction medium. Process analyses confirm that MM-ODH has the potential to be significantly more efficient for CO 2 capture and utilization than conventional CO 2 -ODH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Numerical modeling of chemical looping oxidative dehydrogenation of ethane in parallel packed beds

Chemical looping oxidative dehydrogenation (CL-ODH) of ethane has the potential to be a highly efficient alternative to steam cracking for ethylene production. Accurate reactor modeling is of critical importance to efficiently scale up and optimize this new technology. This study reports a one-dimensional, heterogeneous packed bed model to simulate the CL-ODH of ethane to ethylene with a Na 2 MoO 4 -promoted CaTi 0.1 Mn 0.9 O 3 redox catalyst. Here, the overall reaction kinetics was well-described by coupling the gas-phase steam cracking of ethane with the reduction kinetics of the redox catalyst by H 2 and C 2 H 4 . The impact of H 2 on the formation rate of CO 2 byproduct from C 2 H 4 conversion was also thoroughly investigated to validate the applicability of the kinetic model under operational environments. The temperature variation within the different CL-ODH steps and the temperature distribution along the bed were also carefully considered. The accuracy of the model was validated by experiments conducted in a large lab-scale packed bed reactor (200 g catalyst loading), with an average deviation of 2.8% in terms of ethane conversion and ethylene yield. The model was subsequently used to optimize the operating parameters of the CL-ODH reactor, indicating that up to 63.7% single-pass C 2 +olefin yield can be achieved with the current redox catalyst bed whereas further optimization of the redox catalyst to inhibit C 2 H 4 activation can result in 69.4% single-pass C 2 +yield while maintaining low CO 2 selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Redox oxide@molten salt as a generalized catalyst design strategy for oxidative dehydrogenation of ethane via selective hydrogen combustion

Here, the current study demonstrates a redox oxide @ molten salt core-shell architecture as a generalized redox catalyst design strategy for chemical looping – oxidative dehydrogenation of ethane. 17 combinations of redox active oxides and molten salts were prepared, evaluated, and characterized. X-ray diffraction indicates that the redox oxides and molten salts are fully compatible, forming separate and stable phases. X-ray photoelectron spectroscopy demonstrates that the molten salts aggregate at the redox oxide surface, forming a core-shell structure to block the non-selective sites responsible for CO x formation. Up to ~74% single-pass olefin yields were achieved using the proposed redox catalyst design strategy. Statistical analyses of the performance data indicate the potential to achieve up to 86.7% single-pass yield by simply optimizing the operating conditions using the redox catalysts reported in this study. Meanwhile, the generalizability of the catalyst design strategy offers exciting opportunities to further optimize the composition and performance of the redox catalysts for ethane ODH under a chemical looping scheme with significantly reduced energy consumption and CO 2 emissions.

03 NATURAL GAS↗
DOE OSTI2025

Investigation of Solid Particle Reactors for Nonoxidative Dehydrogenation of Ethane: Toward Solar Thermal Ethylene Production

Concentrating solar power plants can generate renewable heat at temperatures well above those of most industrial processes. Ceramic particles irradiated with concentrated sunlight can store high-quality sensible heat and transfer this to power generation systems. These concepts and materials hold great potential to also enable thermal processes in the chemical industry, but effective strategies for transferring heat from thermal energy storage media into chemical reactors are still under development. This present work evaluated the thermal and chemical compatibility of various solid particle media (including quartz, bauxite, and alumina particles) integrated directly into tube reactors and the subsequent effects on reactor performance for the nonoxidative dehydrogenation of ethane reaction. Empty tube reactors without loaded particles (representing conventional ethane cracking coils) showed significant heat transfer limitations as the tube diameter was scaled. The incorporation of media into the reactor significantly aided heat transfer to the gaseous ethane reactant and increased its conversion by as much as 10% at similar space velocities. Despite direct contact with hydrocarbon gases, alumina and quartz media showed negligible coke formation. Even during reaction in 100% ethane feed gas at 825 °C, the average selectivity of the coke product was only 0.57% when using the quartz media. These materials further demonstrated excellent thermal stability during subsequent reoxidation in air at 800 °C, which simulated the reheating of particles in a circulating particle solar receiver. Conversely, high rates of coke formation, with a product selectivity of 27.5%, were observed on sintered bauxite particles during the reaction, likely promoted by transition metal constituents. These particles fractured upon reoxidation due to exotherms generated from coke combustion. In conclusion, while the use of cofed steam could mitigate attrition of redox-active particles, the ability of inert metal oxide particles to efficiently transfer heat to concentrated ethane reactant gas while suppressing side reactions or degradation suggests that these media could effectively couple solar thermal plants to reactors for next-generation production of ethylene and other critical chemicals.

Hydrocarbons↗
DOE OSTI2024

Molten‐Salt‐Mediated Chemical Looping Oxidative Dehydrogenation of Ethane with In‐Situ Carbon Capture and Utilization

Abstract The molten‐salt‐mediated oxidative dehydrogenation (MM‐ODH) of ethane (C 2 H 6 ) via a chemical looping scheme represents an effective carbon capture and utilization (CCU) method for the valorization of ethane‐rich shale gas and concurrent mitigation of carbon dioxide (CO 2 ) emissions. Here, stepwise experimentation with Li 2 CO 3 ‐Na 2 CO 3 ‐K 2 CO 3 (LNK) ternary salts (i) assessed how each component of the LNK mixture impacted ethane MM‐ODH performance and (ii) explored physicochemical and thermodynamic mechanisms behind melt‐induced changes to ethylene (C 2 H 4 ) and carbon monoxide (CO) yields. Of fifteen screened LNK compositions, nine exhibited ethylene yields greater than 50 % at 800 °C while maintaining C 2 H 4 selectivities of 85 % or higher. LNK salts rich in Li 2 CO 3 content yielded more ethylene and CO on average than their counterparts, and net CO 2 capture per cycle reached a maximum of ~75 %. Extended MM‐ODH cycling also demonstrated long‐term stability of a high‐performing LNK medium. Density functional theory (DFT) calculations andab initiomolecular dynamics (AIMD) simulations suggested that the molten salt does not directly activate C 2 H 6 . Meanwhile, an empirical model informed by experimental data and reaction thermodynamics adequately predicted overall MM‐ODH performance from LNK composition and provided insights into the system′s primary drivers.

Chemistry↗