THE TIME VARIATIONS OF SOLAR COSMIC RAYS DURING THE SEPTEMBER 3, 1960, EVENT
Analysis of results of a series of high-altitude balloon flights concerned with solar flare events and cosmic ray emission
HIGH ALTITUDE BALLOON PROGRAM↗
SEARCH · Search NASA
Results for “Event analysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Spatial, Temporal, and Electrical Characteristics of Lightning in Reported Lightning-Initiated Wildfire Events
Analysis was performed to determine whether a lightning flash could be associated with every reported lightning-initiated wildfire that grew to at least 4 km(exp 2). In total, 905 lightning-initiated wildfires within the Continental United States (CONUS) between 2012 and 2015 were analyzed. Fixed and fire radius search methods showed that 81–88% of wildfires had a corresponding lightning flash within a 14 day period prior to the report date. The two methods showed that 52–60% of lightning-initiated wildfires were reported on the same day as the closest lightning flash. The fire radius method indicated the most promising spatial results, where the median distance between the closest lightning and the wildfire start location was 0.83 km, followed by a 75th percentile of 1.6 km and a 95th percentile of 5.86 km. Ninety percent of the closest lightning flashes to wildfires were negative polarity. Maximum flash densities were less than 0.41 flashes km(exp 2) for the 24 h period at the fire start location. The majority of lightning-initiated holdover events were observed in the Western CONUS, with a peak density in north-central Idaho. A twelve day holdover event in New Mexico was also discussed, outlining the opportunities and limitations of using lightning data to characterize wildfires.
Flash density↗
Pulse interval representations of speech events
Analysis, synthesis, and transmission of human speech based on computation of time intervals between threshold transitions of speech waveform derivatives
Atwood, J. W.↗
Surface Management System Departure Event Data Analysis
This paper presents a data analysis of the Surface Management System (SMS) performance of departure events, including push-back and runway departure events.The paper focuses on the detection performance, or the ability to detect departure events, as well as the prediction performance of SMS. The results detail a modest overall detection performance of push-back events and a significantly high overall detection performance of runway departure events. The overall detection performance of SMS for push-back events is approximately 55%.The overall detection performance of SMS for runway departure events nears 100%. This paper also presents the overall SMS prediction performance for runway departure events as well as the timeliness of the Aircraft Situation Display for Industry data source for SMS predictions.
Monroe, Gilena A.↗
Desktop Modeling and Simulation: Parsimonious, yet Effective Discrete-Event Simulation Analysis
This paper evaluates how quickly students can be trained to construct useful discrete-event simulation models using Excel The typical supply chain used by many large national retailers is described, and an Excel-based simulation model is constructed of it The set of programming and simulation skills required for development of that model are then determined we conclude that six hours of training are required to teach the skills to MBA students . The simulation presented here contains all fundamental functionallty of a simulation model, and so our result holds for any discrete-event simulation model. We argue therefore that Industry workers with the same technical skill set as students having completed one year in an MBA program can be quickly trained to construct simulation models. This result gives credence to the efficacy of Desktop Modeling and Simulation whereby simulation analyses can be quickly developed, run, and analyzed with widely available software, namely Excel.
Bradley, James R.↗
Part 121 Low Altitude Events: An Analysis of ASRS Reports
This presentation provides an aviation SME's human factors analysis of selected Low Altitude and Controlled Flight Towards Terrain (CFTT) events involving Part 121 air carriers as reported to the Aviation Safety Reporting System (ASRS).
low altitude↗
Part 135 and Business Operator Low Altitude Events: An Analysis of ASRS Reports
This presentation provides an aviation SME's human factors analysis of selected Low Altitude and Controlled Flight Towards Terrain (CFTT) events involving Part 135 and business jet operators as reported to the Aviation Safety Reporting System (ASRS).
ASRS reports↗
Ion Anisotropy and High-Energy Variability of Large Solar Particle Events: A Comparative Study
We have made comparative studies of ion anisotropy and high-energy variability of solar energetic particle (SEP) events previously examined by the Solar, Heliospheric, and Interplanetary Environment (SHINE) Workshop campaign. We have found distinctly different characteristics of SEPs between two large "gradual" events having very similar solar progenitors (the 2002 April 21 and August 24 events). Since the scattering centers of SEPs are approximately frozen in the solar wind, we emphasize work in the solar-wind frame where SEPs tend to be isotropized, and small anisotropies are easier to detect. While in the August event no streaming reversal occurred, in the April event the field-aligned anisotropy of all heavy ions showed sign of streaming reversal. The difference in streaming reversal was consistent with the difference in the presence of the outer reflecting boundary. In the April event the magnetic mirror, which was located behind the interplanetary shock driven by the preceding coronal mass ejection (CME), could block the stream of SEPs, while in the August event SEPs escaped freely because of the absence of nearby boundary. The magnetic mirror was formed at the bottleneck of magnetic field lines draped around a flank of the preceding CME. In the previous SHINE event analysis the contrasting event durations and Fe/O ratios of the both events were explained as the interplay between shock geometry and seed population. Our new findings, however, indicate that event duration and time as well as spectral variation are also affected by the presence of a nearby reflecting boundary.
Tan, Lun C.↗
Apparatus and method for high dynamic range counting by pixelated detectors
The present disclosure relates to an apparatus and methods for generating a hybrid image by high-dynamic-range counting. In an embodiment, the apparatus includes a processing circuitry configured to acquire an image from a pixelated detector, obtain a sparsity map of the acquired image, the sparsity map indicating low-flux regions of the acquired image and high-flux regions of the acquired image, generate a low-flux image and a high-flux image based on the sparsity map, perform event analysis of the acquired image based on the low-flux image and the high-flux image, the event analysis including detecting, within the low-flux image, incident events by an event counting mode, multiply, by a normalization constant, resulting intensities of the high-flux image and the detected incident events of the low-flux image, and generate the hybrid image by merging the low-flux image and the high-flux image.
Bammes, Benjamin↗
Covariance-Free Bifidelity Control Variates Importance Sampling for Rare Event Reliability Analysis
Multifidelity modeling has been steadily gaining attention as a tool to address the problem of exorbitant model evaluation costs that makes the estimation of failure probabilities a significant computational challenge for complex real-world problems, particularly when failure is a rare event. To implement multifidelity modeling, estimators that efficiently combine information from multiple models/sources are necessary. In past works, the variance reduction techniques of control variates (CV) and importance sampling (IS) have been leveraged for this task. In this paper, we present the CVIS framework—a creative take on a coupled CV and IS estimator for bifidelity reliability analysis. The framework addresses some of the practical challenges of the CV method by using an estimator for the control variate mean and sidestepping the need to estimate the covariance between the original estimator and the control variate through a clever choice for the tuning constant. Furthermore, the task of selecting an efficient IS distribution is also considered, with a view towards maximally leveraging the bifidelity structure and maintaining expressivity. Additionally, a diagnostic is provided that indicates both the efficiency of the algorithm as well as the relative predictive quality of the models utilized. Finally, the behavior and performance of the framework is explored through analytical and numerical examples.
Markov chain Monte Carlo↗
Single Event Transient Analysis of an SOI Operational Amplifier for Use in Low-Temperature Martian Exploration
The next generation of Martian rover#s to be launched by JPL are to examine polar regions where temperatures are extremely low and the absence of an earth-like atmosphere results in high levels of cosmic radiation at ground level. Cosmic rays lead to a plethora of radiation effects including Single Event Transients (SET) which can severely degrade microelectronic functionality. As such, a radiation-hardened, temperature compensated CMOS Single-On-Insulator (SOI) Operational Amplifier has been designed for JPL by the University of Tennessee and fabricated by Honeywell using the SOI V process. SOI technology has been shownto be far less sensitive to transient effects than both bulk and epilayer Si. Broad beam heavy-ion tests at the University of Texas A&M using Kr and Xebeams of energy 25MeV/amu were performed to ascertain the duration and severity of the SET for the op-amp configured for a low and high gain application. However, some ambiguity regarding the location of transient formation required the use of a focused MeV ion microbeam. A 36MeV O6(+) microbeam. the Sandia National Laboratory (SNL) was used to image and verify regions of particular concern. This is a viewgraph presentation
operational amplifier↗
Toward an event-level analysis of hadron structure using differential programming
Reconstructing the internal properties of hadrons in terms of fundamental quark and gluon de- grees of freedom is a central goal in nuclear and particle physics. This effort lies at the core of major experimental programs, such as the Jefferson Lab 12 GeV program and the upcoming Electron-Ion Collider. A primary challenge is the inherent inverse problem: converting large-scale observational data from collision events into the fundamental QCD-defined densities that characterize the micro- scopic structure of hadronic systems. Recent advances in AI and machine learning have opened new avenues for addressing this challenge using deep learning techniques. A particularly promising direction is the integration of complex theoretical calculations and experimental simulations into a unified framework capable of reconstructing these densities directly from event-level information. In this document, we introduce a key algorithm called LOITS, which enables differentiable program- ming within such a framework, facilitating the use of AI/ML techniques to solve the inverse problem of QCF reconstruction at the event level.
Braga, Kevin [College of William and Mary, William↗
Safety Benefits Assessment for Accident Tolerant Fuels in Consideration of Steam Generator Tube Degradation Using Dynamic Event Tree Analysis
Accident tolerant fuel (ATF) is expected to delay or prevent core damage by providing additional coping time under accidents involving loss of core cooling. The effect of extended coping time may vary depending on the plant response to accidents. Age-related component degradation that deteriorates plant performance over time could have an impact on the actual advantages of ATF. The potential safety benefits of two near-term ATF candidates, including Cr-coated Zr cladding and FeCrAl cladding, are assessed for a 2-in. loss-of-coolant accident with failed high-pressure safety injection using the dynamic event tree (DET) approach considering possible stress corrosion cracking of steam generator (SG) tubing under aging. The DET approach allows likelihood quantification of accident sequences leading to core damage, including stochastic variation of system response and human actions during accident mitigation. The safety benefits of the selected ATF claddings in terms of additional coping time and the core damage frequency reduction rate under specified accident situations were quantitatively estimated. The results show that the deployment of the two selected ATF claddings is expected to lead to longer coping times and lower core damage frequency due to the wider safety margin to peak cladding temperature they provide. The safety advantages would be greater as SG tube degradation proceeds. Thus, the two ATF candidates would lead to less severe consequences in terms of likelihood of core damage and susceptibility to the SG tube degradation than UO 2 -Zr fuel.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Decidability for a temporal logic used in discrete-event system analysis
The type of plant considered is one that can be modeled by a nondeterministic finite-state machine P. The regulator is a deterministic finite state machine R. The closed-loop system is formed by connecting P and R in a regulator configuration. Formulas in a propositional temporal language are used to describe the behavior of the closed-loop system. It is shown that there is a mechanical procedure which, for a given P and R, and a temporal formula Psi, will determine in a finite number of steps whether or not Psi must be true. This 'decidability' result could be proven using other known results on temporal logic. The proof given here shows that the behavior of the closed-loop system may safely be assumed to be ultimately periodic. The results are illustrated on two discrete-event system examples.
Knight, J. F.↗
MOSAiC studies of long-lasting mixed-phase cloud events and analysis of the liquid-phase properties of Arctic clouds
Vertically resolved observations of the temporal evolution of mixed-phase clouds (MPCs) were performed over the central Arctic during the MOSAiC (Multidisciplinary drifting Observatory for the Study of Arctic Climate) expedition, which lasted from October 2019 to September 2020. The research icebreaker Polarstern , drifting with the pack ice for more than 7 months, mostly at latitudes > 85° N, served as a platform for state-of-the-art remote sensing of aerosols and clouds. The use of the recently introduced dual field-of-view (FOV) polarization lidar technique in combination with the well-established lidar-radar retrieval technique provided, for the first time, a robust instrumental basis to monitor the evolution of the liquid and the ice phase of MPCs and the interplay between the two phases. Two long-lasting Arctic MPC events observed close to the North Pole in mid-winter (December 2019) and late summer (September 2020) are discussed to provide new insight into Arctic MPC evolution processes. In the second part of the article, cloud statistics, covering all seasons of a year, are presented. The focus is on the optical and microphysical properties of the liquid phase. These results are solely derived from the dual-FOV lidar observations. The key findings of the study can be summarized as follows: persistent activation of aerosol particles to form water droplets is of great importance for the longevity of MPCs. The observations confirm that ice formation occurs predominantly via immersion freezing. The field studies suggest that the free tropospheric reservoirs of cloud condensation nuclei (CCN) and of ice-nucleating particles (INPs) were always well filled, i.e., the clouds did not exhaust their supply of activatable and activated particles. The observation of long-lasting MPC events, low ice production rates, and a sufficiently large INP reservoir leads to the recommendation to use a time-dependent immersion freezing parameterization in MPC modeling efforts.
Jimenez, Cristofer [Leibniz Inst. for Tropospheric↗
Climate change and federal aid disbursements after Hurricane Harvey: an extreme event attribution analysis
The role climate change plays in increasing the burden placed on governments and insurers to pay for recovery has not been extensively explored and is the focus of this study. This study examines the impacts of climate change attributed flooding on federal disaster aid disbursement in Harris County, Texas following Hurricane Harvey in 2017. Our approach uses flood models to estimate the amount of flood damages attributable and not attributable to climate change under two climate change attribution scenarios from peer reviewed studies: 20% and 38% increases in rainfall associated with the hurricane due to climate change. These estimates are combined with census tract-level disbursement data for FEMA’s National Flood Insurance Program (NFIP) and the Individual Assistance (IA) part of the Individuals and Households Program. We employ spatial lag regression models with direct and spatial spillover effects to analyze the relationship between a tract’s flood damages—both attributed and not attributed to climate change—and federal disaster aid. We find that both types of flood damage shape federal aid disbursements, but that climate change attributed damages tend to have larger effect sizes (elasticities) especially for IA. Specifically, for a 1% increase in additional climate change attributed damages per household in a census tract (under the 20% scenario), expected NFIP levels in that census tract are 0.26% higher and IA levels are 0.3% higher. Implications center on federal funding in an era of climate change.
FEMA↗
High event rate analysis technique for the dual-axis duo-lateral position-sensitive silicon detectors of FAUST
The dual-axis duo-lateral (DADL) position-sensitive silicon detector was developed to obtain precise position and energy information for detected charged particles. The Forward Array Using Silicon Technology (FAUST) is currently equipped with 68 DADL detectors backed by CsI(Tl) scintillators for the study of charged particle correlations in heavy-ion collisions where precise position and energy information is essential. When conventional signal processing electronics were used for the DADL detectors, a position dependence of the measured energy as well as distortions in the calculated particle positions were observed. In previous work, waveforms from the detector after preamplification were studied to better understand the features that give rise to these distortions; therein, a waveform analysis technique was developed to improve the energy resolution and linearity in position reconstruction. However, the reading and writing of waveforms for an entire detector array limits data collection rates and adds significant burden in data storage and analysis speed. In this work, the integrators of a Struck SIS3316 ADC were utilized to process 228 Th source data to develop and optimize a new analysis method that captures the benefits of the waveform analysis technique while circumventing the waveform writing requirement. This integrator method – capable of 59 keV (FWHM) energy resolution – was used in the collection of 35 MeV/nucleon 28 Si + 12 C collision data using FAUST to investigate exotic decays of highly excited highly deformed nuclei. In this data, a position resolution of 0.4 mm (FWHM) was obtained for 25 MeV α-particles; for α-particles near this energy that originate from 8 Be ground state decays, a 8 Be ground state width of 30 keV (FWHM) was obtained. The impact of the energy-dependent DADL position resolution emergent from electronic noise on the quality of excited state measurement was modeled and compared to the experimental data.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Measurement Uncertainty in One-Of-A-Kind Event Data Analysis
A golden standard in science is to repeat an experiment a statistically significant number of times, recording data using the same set of detectors and the same data analysis methodology. In such case experimental error includes both the range of true values generated by repetitions of the experiment, and measurement uncertainty caused by the detector. They are independent. It is a huge and too frequently used simplification, to assume that one can measure multiple repetitions of an identical experiment, resulting in identical true experimental value. Repetitions, as similar is it is experimentally achievable, have unavoidable built-in differences resulting in a range of the true values rather than in a single value. When modern, very sensitive and well calibrated measurement systems are used, this range is not negligible, and sometimes dominates over the measurement uncertainty. Range of true values depends on built-in differences in physics of the experiment. Stochastic physical processes result typically in a broader range of true values than non-stochastic processes do. Measurement uncertainty depends on a measurement method (properties of the detector not of the experiment). Modern measurement methods, including digital ones, frequently make the measurement uncertainty very small. When data from one–of –a kind experiment are analyzed, only the measurement uncertainty is reported. It provides no information about the range of true experimental values, neither about reliability of a reported data point. Reliability of a data point is in general independent from its measurement uncertainty. However, in practice reliable measurement methods frequently have high measurement uncertainty, while low reliability methods are applied to limit measurement uncertainty. Comparison of reliable data with high measurement uncertainty to not so reliable data measured with low uncertainty is discussed – in different scenarios different data analysis methods are applicable. Methods for data analysis from an experiment repeated statistically significant number of times are very well developed. They do not require a detailed expertise in physics of an experiment, nor in the properties of the measurement system used, and meaning of the reported uncertainty is well understood in any scientific community. It all changes when data from one-of-a-kind experiment is analyzed. Analyst’s expertise is required both in the physics of the experiment and in all aspects of the measurement system, all possible malfunctions. Data users must remember that only measurement uncertainty is reported from any one-of-a-kind experiment. Theory with simulations may provide estimation of expected built-in differences in the experiment, and by this of expected range of true values for a given experiment; yet measurement uncertainty can never be used in place of the range of true experimental values.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗