Search NASASearch

SEARCH · Search NASA

Results for “Explosive burning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Nucleosynthesis in novae - A source of Ne-E and Al-26

It is shown upon computation of the nucleosynthesis products of explosive hydrogen burning, in the framework of recent nova models, that nova condensates will probably contain isotopic anomalies in Ne-22, from Na-22 decay, and Mg-26, from Al-26 decay. It is found, for all the models considered, that while too much Ne-20 and -21 is produced relative to Ne-22 to explain the presumably almost pure Ne-22 meteoritic Ne-E component, the Na-22 abundance is high enough to explain Ne-E as its decay product if nova condensates are preserved in Ne samples. It is also determined that while Al-26 is coproduced with Na-22, its total amount strongly depends on the uncertain, Si-27(p, gamma)P-28 reaction rate. The abundances of all nuclides, up to Ar, are computed and found to be clearly nonsolar in many cases.

Hillebrandt, W.

s-process studies in the light of new experimental cross sections - Distribution of neutron fluences and r-process residuals

A best set of neutron-capture cross sections has been evaluated for the most important s-process isotopes. With this data base, s-process studies have been carried out using the traditional model which assumes a steady neutron flux and an exponential distribution of neutron irradiations. The calculated sigma-N curve is in excellent agreement with the empirical sigma-N-values of pure s-process nuclei. Simultaneously, good agreement is found between the difference of solar and s-process abundances and the abundances of pure r-process nuclei. The abundance pattern of the iron group elements where s-process results complement the abundances obtained from explosive nuclear burning is discussed. The results obtained from the traditional s-process model such as seed abundances, mean neutron irradiations, or neutron densities are compared to recent stellar model calculations which assume the He-burning shells of red giant stars as the site for the s-process.

Kaeppeler, F.

The waiting point approximation in R-process calculations

The steady flow approximation to the r-process has been used to evaluate the validity of the waiting point assumption (that, for a given charge number Z, neutron captures become balanced by neutron photodisintegrations) under a variety of conditions. The criterion for the accuracy of the approximation for any set of nuclei with the same value of Z is that the ratio of the total rate of neutron photodisintegration in those nuclei to the total rate of neutron captures should be close to unity. No set of conditions involving neutron production by helium thermonuclear reactions (at temperatures up to 10 to the 9th K) could be found for which the waiting point approximation is useful for all values of Z, and it is recommended that all such r-process calculations not use this approximation. At higher temperatures, such as those characteristic of explosive carbon burning (2 x 10 to the 9th K), the waiting point approximation is much better.

Cameron, A. G. W.

The (32)S/(33)S abundance as a function of galactocentric radius in the Milky Way

Astration of heavy elements by the stars of the Milky Way forms a fossil record which may preserve spacial distribution of the mass function for the stars in the galaxy. Sulfur is among the last common element for which the relative abundance of its various isotopes have yet to be completely measured within our galaxy. Explosive oxygen burning in massive stars is thought to be the process which dominates sulfur production within stars. There models predict that the various isotopes (S-32, S-33, S-34) are formed in relative abundance which depend strongly upon the mass of the parent star. This relative abundance is thought to be unaffected by subsequent stellar procesing since all important sinks of sulfur destroy it without regard for isotopic form. Hence the spacial variation of the mass function (MF) can be studied by measuring the abundance variation of sulfur isotopes in the galaxy provided that the product yields for these isotopes are known accurately as a function of stellar mass.

Greenhouse, M. A.

Promoted ignition of oxygen regulators

An investigation has been conducted of the ignition-containment capability of 12 oxygen regulators contaminated by various levels of hydrocarbon oils and subjected to promoted ignition. The regulators inlets were pressurized to 15.2 MPa with gaseous oxygen, and the oil was ignited by an electrical arc located upstream of the test article inlet port; the flame was allowed to propagate with the oxygen flow throughout the regulator internal cavities. The resulting reactions, which ranged in character from complete containment of the promoted ignition for one two-stage regulator to extensive burning and explosive energy release for several other (both single- and double-stage) regulators, indicate the need to prevent oil from being introduced into regulators.

Newton, Barry E.

Fingerprints of carbon, nitrogen, and silicon isotopes in small interstellar SiC grains from the Murchison meteorite

We report ion microprobe determinations of the carbon, nitrogen, and silicon isotopic compositions of small SiC grains from the Murchison CM2 chondrite. Analyses were made on samples containing variable numbers of grains and on 14 individual grains. In some cases the multiple-grain sample compositions were probably dominated by only one or two grains. Total ranges observed are given. Only a few grains show values near the range limits. Both the total ranges of carbon and nitrogen isotopic compositions, and even the narrower ranges typical for the majority of the grains, are similar to those observed for larger SiC grains. Two rare components appear to be present in the smaller-size fraction, one characterized by C-12/C-13 about 12-16 and the other by very heavy nitrogen. The carbon and nitrogen isotopic compositions qualitatively may reflect hydrostatic H-burning via the CNO cycle and He-burning in red giants, as well as explosive H-burning in novae. The silicon isotopic compositions of most grains qualitatively show what is the signature of He-burning. The silicon isotopic composition of one grain, however, suggests a different process.

Hoppe, Peter

Burning-to-violent-reaction transitions in explosions

In a program to study fragment initiation of cased propellants and explosives, it was found that one area of extreme importance is that of the cased reactive-material burning reactions triggered by the perforation of the case by an impacting fragment. Once the reaction is started, the importance of the impactor decreases, and the sequence of events is controlled by the burning properties of the reactive material, its physical condition, and the nature of the confinement. A brief history of the results obtained by previous investigators is presented along with a discussion of variations in experimental results caused by geometrical changes in the test configurations. Changes in interpretations of the results are discussed. Results of recent confined-burn tests with Composition B, PBXC-116, PBXC-117, and Destex are presented, including results of metallurgical examination of the confined fragments. These examinations indicate a transition to a violent reaction which is not a detonation, although it produces many effects that resemble a detonation.

Graham, K. J.

Isotopic yields of Mg, Al from the carbon and neon zones in the explosion of a massive star

A model is developed for the nucleosynthetic yields from the supernova explosion of a massive star of the sort which has been proposed as the initiating event in the formation of the solar system by Cameron and Truran (1977). Calculations start with the Hugoniot curves, estimating the preshock conditions from a 25 solar masses model at the start of core collapse. It is shown that the products of static carbon burning dominate abundance patterns in the ejecta. Both explosive carbon burning and explosive neon burning contribute significantly to Al-26. The production of Al-26 in this model is consistent with the trigger hypothesis.

Morgan, J. A.

Near-Infrared Spectra of Type Ia Supernovae

We report near-infrared (NIR) spectroscopic observations of 12 'branch-normal' Type Ia supernovae (SNe Ia) that cover the wavelength region from 0.8 to 2.5 microns. Our sample more than doubles the number of SNe Ia with published NIR spectra within 3 weeks of maximum light. The epochs of observation range from 13 days before maximum light to 18 days after maximum light. A detailed model for a Type Ia supernovae is used to identify spectral features. The Doppler shifts of lines are measured to obtain the velocity and thus the radial distribution of elements. The NIR is an extremely useful tool to probe the chemical structure in the layers of SNe Ia ejecta. This wavelength region is optimal for examining certain products of the SNe Ia explosion that may be blended or obscured in other spectral regions. We identify spectral features from Mg II, Ca II, Si II, Fe II, Co II, Ni II, and possibly Mn II. We find no indications for hydrogen, helium, or carbon in the spectra. The spectral features reveal important clues about the physical characteristics of SNe Ia. We use the features to derive upper limits for the amount of unburned matter, to identify the transition regions from explosive carbon to oxygen burning and from partial to complete silicon burning, and to estimate the level of mixing during and after the explosion. Elements synthesized in the outer layers during the explosion appear to remain in distinct layers. That provides strong evidence for the presence of a detonation phase during the explosion as it occurs in delayed detonation or merger models. Mg II velocities are found to exceed 11,000 - 15,000 km/s, depending on the individual SNe Ia. That result suggests that burning during the explosion reaches the outermost layers of the progenitor and limits the amount of unburned material to less than 10% of the mass of the progenitor. Small residuals of unburned material are predicted by delayed detonation models but are inconsistent with pure deflagration or merger models. Differences in the spectra of the individual SNe Ia demonstrate the variety of these events.

Marion, G. H.

Saving Lives With Rocket Power

Thiokol Propulsion uses NASA's surplus rocket fuel to produce a flare that can safely destroy land mines. Through a Memorandum of Agreement between Thiokol and Marshall Space Flight Center, Thiokol uses the scrap Reusable Solid Rocket Motor (RSRM) propellant. The resulting Demining Device was developed by Thiokol with the help of DE Technologies. The Demining Device neutralizes land mines in the field without setting them off. The Demining Device flare is placed next to an uncovered land mine. Using a battery-triggered electric match, the flare is then ignited. Using the excess and now solidified rocket fuel, the flare burns a hole in the mine's case and ignites the explosive contents. Once the explosive material is burned away, the mine is disarmed and no longer dangerous.

Source record

The Circumstellar Medium of Cassiopeia A Inferred from the Outer Ejecta Knot Properties

We investigate the effect of the circumstellar medium density profile on the X-ray emission from outer ejecta knots in the Cassiopeia A supernova remnant using the 1 Ms Chandra observation. The spectra of a number of radial series of ejecta knots at various positions around the remnant are analyzed using techniques similar to those devised in previous papers. We can obtain a reasonable match to our data for a circumstellar density profile proportional to r(sup -2) as would arise from the steady dense wind of a red supergiant, but the agreement is improved if we introduce a central cavity around the progenitor into our models. Such a profile might arise if the progenitor emitted a, fast tenuous stellar wind for a short period immediately prior to explosion. We review other lines of evidence supporting this conclusion. The spectra also indicate the widespread presence of Fe-enriched plasma that was presumably formed by complete Si burning during the explosion, possibly via alpha-rich freezeout. This component is typically associated with hotter and more highly ionized gas than the bulk of the O- and Si-rich ejecta.

Hwang, Una

Interstellar potassium and argon

Isotopic anomalies are calculated in K and Ar that will be expected to be carried in interstellar grains. Special attention is given to the supernova condensates that precipitate during the expansion of the explosive oxygen-burning zone of the interior, because that is where K-39, K-41 and Ar-36, Ar-38 find their natural origins. Expectations are given for K-Ar ages in excess of the solar age in accumulations of presolar grains, and for K anomalies in Ca-rich mineral within Allende inclusions, because experiments searching for such effects are currently underway. Attention is also given to predictions of excess Ar-36 owing to extinct Cl-36 within presolar grains, and to descriptions of new correlations that can confirm its existence.

Clayton, D. D.

Coatings for graphite fibers

Graphite fibers released from composites during burning or an explosion caused shorting of electrical and electronic equipment. Silicon carbide, silica, silicon nitride and boron nitride were coated on graphite fibers to increase their electrical resistances. Resistances as high as three orders of magnitude higher than uncoated fiber were attained without any significant degradation of the substrate fiber. An organo-silicone approach to produce coated fibers with high electrical resistance was also used. Celion 6000 graphite fibers were coated with an organo-silicone compound, followed by hydrolysis and pyrolysis of the coating to a silica-like material. The shear and flexural strengths of composites made from high electrically resistant fibers were considerably lower than the shear and flexural strengths of composites made from the lower electrically resistant fibers. The lower shear strengths of the composites indicated that the coatings on these fibers were weaker than the coating on the fibers which were pyrolyzed at higher temperature.

Galasso, F. S.

X ray and gamma ray emission from classical nova outbursts

The outbursts of classical novae are now recognized to be consequences of thermonuclear runaways proceeding in accreted hydrogen-rich shells on white dwarfs in close binary systems. For the conditions that are known to exist in these environments, it is expected that soft x-rays can be emitted, and indeed x-rays were detected from a number of novae. The circumstances for which we expect novae to produce significant x-ray fluxes and provide estimates of the luminosities and effective temperatures are described. It is also known that at the high temperatures that are known to be achieved in this explosive hydrogen-burning environment, significant production of both Na-22 and Al-26 will occur. In this context, we identify the conditions for which gamma-ray emission may be expected to result from nova outbursts.

Truran, James W.

UH cosmic rays - Possible origin in massive stars

The origin of the Z greater than 28, ultraheavy (UH) cosmic rays in supernova explosions of massive stars, at least about 10 solar masses, is considered. For Z greater than 70, the UH data are dominated by an r-process source distribution, but for the elements just beyond iron, Z from 29 to 36, the data cannot be explained by any single process of nucleosynthesis. This problem is solved naturally in a massive-star model by secondary neutron-capture reactions occurring during core helium burning (a limited s-process) and during explosive carbon burning. Interstellar-propagation calculations have been performed with these episodes of synthesis as source distributions, and the results offer an explanation for the current UH cosmic-ray data. Further, the heavy-element synthesis during explosive carbon burning is re-examined by using more realistic initial conditions given by the post-helium-burning configuration of the star. These results are compared with earlier work and the UH cosmic-ray data. Some effects of preferential acceleration, based upon ionization potential, are considered, and experimental tests for this model are discussed.

Wefel, J. P.

UH cosmic rays and solar system material - The elements just beyond iron

The nucleosynthesis of cosmic-ray elements between the iron peak and the rare-earth region is examined, and compositional changes introduced by propagation in interstellar space are calculated. Theories on the origin of elements heavier than iron are reviewed, a supernova model of explosive nucleosynthesis is adopted for the ultraheavy (UH) cosmic rays, and computational results for different source distributions are compared with experimental data. It is shown that both the cosmic-ray data and the nucleosynthesis calculations are not yet of sufficient precision to pinpoint the processes occurring in cosmic-ray source regions, that the available data do provide boundary conditions for cosmic-ray nucleosynthesis, and that these limits may apply to the origin of elements in the solar system. Specifically, it is concluded that solar-system abundances appear to be consistent with a superposition of the massive-star core-helium-burning s-process plus explosive-carbon-burning synthesis for the elements from Cu to As and are explained adequately by the s- and r-processes for heavier elements.

Wefel, J. P.

The identification of meteorite inclusions with isotope anomalies

Ca-Al refractory inclusions with characteristic chemical and mineralogical compositions show an enhanced occurrence of 20 pct of isotope anomalies reflecting unknown nucleosynthetic effects for O and Mg. The anomalies are characterized by large isotope fractionation in Mg, apparent deficits in Mg-26/Mg-24, and large correlated effects for isotopes of Ca, Ti, and Cr. These isotope patterns define exotic components depleted in the most neutron-rich isotopes of Ca, Ti, and Cr, or components depleted in isotopes produced in explosive O and Si burning. An opaque assemblage within one of the inclusions yields isotope anomalies in Cr similar to the bulk inclusion and must be intrinsically part of the inclusion and not a trapped, foreign grain aggregate.

Papanastassiou, D. A.

Feasibility of an advanced thrust termination assembly for a solid propellant rocket motor

A total of 68 quench tests were conducted in a vented bomb assembly (VBA). Designed to simulate full-scale motor operating conditions, this laboratory apparatus uses a 2-inch-diameter, end-burning propellant charge and an insulated disc of consolidated hydrated aluminum sulfate along with the explosive charge necessary to disperse the salt and inject it onto the burning surface. The VBA was constructed to permit variation of motor design parameters of interest; i.e., weight of salt per unit burning surface area, weight of explosive per unit weight of salt, distance from salt surface to burning surface, incidence angle of salt injection, chamber pressure, and burn time. Completely satisfactory salt quenching, without re-ignition, occurred in only two VBA tests. These were accomplished with a quench charge ratio (QCR) of 0.023 lb salt per square inch of burning surface at dispersing charge ratios (DCR) of 13 and 28 lb of salt per lb of explosive. Candidate materials for insulating salt charges from the rocket combustion environment were evaluated in firings of 5-inch-diameter, uncured end-burner motors. A pressed, alumina ceramic fiber material was selected for further evaluation and use in the final demonstration motor.

Source record