Search NASA⌕ Search

SEARCH · Search NASA

Results for “FILMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Investigations of Polymethacrylate Tribochemical Films Using X-Ray Spectroscopy and Optical Profilometry

This study investigates the elemental composition and surface morphology of solid tribochemical films formed on steel surfaces. The reversible addition-fragmentation chain transfer (RAFT) method was used to synthesize nine different metal-free polymers, which were blended into commercial base oils. The polymers were either homopolymers of dodecyl methacrylate and ethylhexyl methacrylate or were co-polymers of these monomers with six polar monomers. After tribological testing at 100 degrees C using the ball-on-flat geometry, the resulting tribochemical films were imaged using scanning electron microscopy (SEM) and optical microscopy. The resulting tribochemical films have thicknesses around 50-100 nm. Two of the films corresponding to small (P1-imidazole-containing copolymer) and large (P3-less polar homopolymer) wear were cross-sectioned using focused ion beam (FIB) and analyzed for elemental composition using energy-dispersive X-Ray (EDX) mapping. Oxygen and nitrogen enrichment was observed, consistent with the relative chemical composition of the precursor polymers. Transmission electron microscopy (TEM) evidence suggests that at the worn surface, some organic elements penetrate or are mixed into the steel substrate giving an interlocking appearance. The two samples examined with TEM showed that P1 tribofilm is diffused or mixed with the steel substrate more so than P3, suggesting a stronger affinity and contact during tribofilm formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Tuning magnetic and optical properties through strain in epitaxial LaCrO 3 thin films

We report on the effect of epitaxial strain on magnetic and optical properties of perovskite LaCrO 3 (LCO) single crystal thin films. Epitaxial LCO thin films are grown by pulsed laser deposition on proper choice of substrates to impose different strain states. A combined experimental and theoretical approach is used to demonstrate the direct correlation between lattice-strain and functional properties. The magnetization results show that the lattice anisotropy plays a critical role in controlling the magnetic behavior of LCO films. The strain induced tetragonality in the film lattice strongly affects the optical transitions and charge transfer gap in LCO. This study opens possibilities to tailor the functional properties of LCO and related materials by strain engineering in epitaxial growth.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Li iontronics in single-crystalline T-Nb2O5 thin films with vertical ionic transport channels

Abstract The niobium oxide polymorph T -Nb 2 O 5 has been extensively investigated in its bulk form especially for applications in fast-charging batteries and electrochemical (pseudo)capacitors. Its crystal structure, which has two-dimensional (2D) layers with very low steric hindrance, allows for fast Li-ion migration. However, since its discovery in 1941, the growth of single-crystalline thin films and its electronic applications have not yet been realized, probably due to its large orthorhombic unit cell along with the existence of many polymorphs. Here we demonstrate the epitaxial growth of single-crystalline T -Nb 2 O 5 thin films, critically with the ionic transport channels oriented perpendicular to the film’s surface. These vertical 2D channels enable fast Li-ion migration, which we show gives rise to a colossal insulator–metal transition, where the resistivity drops by 11 orders of magnitude due to the population of the initially empty Nb 4 d 0 states by electrons. Moreover, we reveal multiple unexplored phase transitions with distinct crystal and electronic structures over a wide range of Li-ion concentrations by comprehensive in situ experiments and theoretical calculations, which allow for the reversible and repeatable manipulation of these phases and their distinct electronic properties. This work paves the way for the exploration of novel thin films with ionic channels and their potential applications.

Chemistry↗
NASA NTRS2000

Friction and Wear Properties of Selected Solid Lubricating Films: Ion-Plated Lead Films - Part 2

To evaluate commercially developed dry solid film lubricants for aerospace bearing applications, an investigation was conducted to examine the friction and wear behavior of ion-plated lead films in sliding contact with 6-mm-diameter American Iron and Steel Institute (AISI) 440C stainless steel balls. Unidirectional sliding friction experiments were conducted with a load of 5.9 N (600 g), a mean Hertzian contact pressure of 0.79 GPa (maximum Hertzian contact pressure of 1.2 GPa), and a sliding velocity of 0.2 m/s. The experiments were conducted at room temperature in three environments: ultrahigh vacuum (vacuum pressure, 7 x 10(exp -7 Pa), humid air (relative humidity, approx. 20 percent), and dry nitrogen (relative humidity, less then 1 percent). The resultant films were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and surface profilometry. Marked differences in the friction and wear of the ion-plated lead films investigated herein resulted from the environmental conditions. The main criteria for judging the performance of the ion-plated lead films were coefficient of friction and wear rate, which had to be less than 0.3 and on the order of 1(exp -6) cu mm/N.m or less, respectively. The ion-plated lead films met both criteria only in ultrahigh vacuum but failed in humid air and in dry nitrogen, where the coefficient of friction was higher than the criterion. Both the lead film wear rate and the ball wear rate met that criterion in all three environments. Adhesion and plastic deformation played important roles in the friction and wear of the ion-plated lead films in contact with 440C stainless steel balls in the three environments. All sliding involved adhesive transfer of materials: transfer of lead wear debris to the counterpart 440C stainless steel and transfer of 440C stainless steel wear debris to the counterpart lead.

Miyoshi, Kazuhisa↗
DOE OSTI2022

Plasma-Assisted Epitaxy of Piezoelectric Sc x Al 1-x N Films on Sapphire for Use in Harsh-Environment Microwave Acoustic Sensors

The Sc x Al 1-x N wurtzite structure has been shown theoretically and experimentally to exhibit significantly higher piezoelectric coupling compared to pure AlN. In this work, a plasma-assisted epitaxial growth method has been used to synthesize epitaxial (0002) Sc x Al 1-x N films on c-sapphire substrates from x = 0.07 to 0.30 by co-evaporating high-purity Sc and Al sources in the presence of a nitrogen plasma generated by an RF plasma source. Epitaxial Sc x Al 1-x N films with highly oriented (0002) grains and in-plane registry were produced on c-sapphire substrates that were pre-exposed to the nitrogen plasma to form an oxynitride seed layer. Growth of Sc x Al 1-x N films was carried out at 930°C under both metal-rich and N-rich conditions using precisely controlled Sc, Al, and N-plasma fluxes. Metal-rich depositions yielded non-(0002)-oriented Sc x Al 1-x N grains and intermetallic ScAl grains. Nitrogen-rich growth with a Sc/Al flux ratio of 1/3 produced the best (0002) epitaxy as determined by x-ray diffraction analysis. Surface acoustic wave resonator (SAWR) devices were fabricated from 500-nm-thick Sc x Al 1-x N and AlN films to extract their electromechanical coupling coefficients, k 2 . As the Sc concentration in the films increases, the degree of (0002) epitaxy is reduced, yet the value of k 2 increases becasue there is more Sc in the wurzite lattice despite the decreased level of (0002) grain alignment. As a result, the use of a 10-nm-thick Si x N y capping layer on top of the Sc x Al 1-x N films aids in preventing etching during SAWR device photolithography and also helps hinder film oxidation up to 800°C.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Film formation mechanisms in mixed-dimensional 2D/3D halide perovskite films revealed by in situ grazing-incidence wide-angle X-ray scattering

We report mixed dimensionality 2D/3D hybrid halide perovskites retain the stability of 2D perovskites (formula (A')2(A)n-1PbnI3n+1) and long diffusion lengths of the 3D materials (formula AMX3), thereby affording solar cells with extended stability as well as state of the art efficiencies approaching that of the 3D materials. These films are made by spin coating precursor solutions with arbitrarily large average layer thickness n ($\langle$n$\rangle$ > 7) to give films with both 2D and 3D phases present. While the 2D and 3D perovskite film formation mechanisms have been studied previously, little is understood about composite 2D/3D film formation. We used in situ grazing-incidence wide-angle scattering (GIWAXS) with synchrotron radiation to fully characterize films fabricated from precursor solutions with stoichiometries of (BA) 2 (MA) n-1 Pb n I 3n+1 ($\langle$n$\rangle$ = 3, 4, 5, 7, “12,” “50,” and ∞ (MAPbI 3 )). Four different mechanisms are seen depending on the stoichiometry in the precursor solution. When $\langle$n$\rangle$ = 3, oriented perovskite grows directly. For $\langle$n$\rangle$ = 4-5, the needle-shaped solvate (MA) 2 Pb 3 I 8 ·2DMF forms concomitantly with the oriented perovskite which leads to 2D/3D composite films. For $\langle$n$\rangle$ ≥ 7, this solvate dominates and unoriented perovskite grows in secondarily. For 3D perovskite, the solvate is the only phase formed. Kinetic analysis shows faster and earlier growth of the solvate with increasing $\langle$n$\rangle$. Using this knowledge, we show that the undesirable solvate mechanism can be reduced by addition of excess ammonium iodide in the precursor solution to give highly oriented films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthesis and characterization of amorphous Fe2.75Dy-oxide thin films demonstrating room-temperature semiconductor, magnetism, and optical transparency

Recently, amorphous/disordered oxide thin films made from Fe and lanthanides like Dy and Tb have been reported to have a rich set of magnetic, optical, and electronic properties, as well as room-temperature magneto-electric coupling with multiferroics [A. Malasi et al., Sci. Rep. 5, 18157 (2015); H. Taz et al., Sci. Rep. 6, 27869 (2016); and H. Taz et al., Sci. Rep. 10, 1–10 (2020)]. Here, we report the synthesis and detailed characterization of Fe2.75Dy-oxide thin films prepared on various substrates using electron beam co-evaporation. The structure, chemistry, electric, magnetic, and optical properties were studied for the as-prepared and annealed (373 K, in air, 1 h) films of thickness 40 nm. High resolution transmission electron microscopy and electron diffraction study showed that the films were amorphous in both the as-prepared and annealed states. The electron energy-loss spectroscopy studies quantified that metal oxygen stoichiometry changed from Fe2.75Dy-O1.5 to Fe2.75Dy-O1.7 upon annealing. Synchrotron-based x-ray absorption spectroscopy investigation confirmed that the as-prepared films were highly disordered with predominantly metallic Fe and Dy states that became slightly oxidized with annealing in air. The as-prepared amorphous films demonstrated significantly high value of ordinary (∼10 cm2/V s) and anomalous (∼102 cm2/V s) Hall mobility and high electrical conductivity of ∼103 S/cm at room temperature. The cryogenic magnetic property measurement shows two-step magnetization below 200 K, suggesting exchange-spring magnetic interaction. The nature of the field cooled and zero-field cooled curves suggested a spin-glass like transition between 78 K and 80 K, with a characteristic broad peak. The Tauc plot analysis from optical transmission spectra confirms the existence of an optical bandgap of ∼2.42 eV that increased slightly to ∼2.48 eV upon annealing. This rich set of transport, optical, and magnetic properties in these thin films is very exciting and points to potential applicability in low-cost multifunctional devices requiring a combination of transparent, semiconducting, and magnetic responses, such as in spintronics.

Prasad Koirala, Krishna (ORCID:000000029137917X)↗
NASA NTRS1980

Tribological properties of sputtered MoS sub 2 films in relation to film morphology

Thin sputter deposited MoS2 films in the 2000 to 6000 A thickness range have shown excellent lubricating properties, when sputtering parameters and substrate conditions are properly selected and precisely controlled. The lubricating properties of sputtered MoS2 films are strongly influenced by their crystalline-amorphous structure, morphology and composition. The coefficient of friction can range from 0.04 which is effective lubrication to 0.4 which reflects an absence of lubricating properties. Visual screening and slight wiping of the as-sputtered MoS2 film can identify the integrity of the film. An acceptable film displays a black-sooty surface appearance whereas an unacceptable film has a highly reflective, gray surface and the film is hard and brittle.

Spalvins, T.↗
NASA NTRS1989

Comparison of full 3-D, thin-film 3-D, and thin-film plate analyses of a postbuckled embedded delamination

Strain-energy release rates are often used to predict when delamination growth will occur in laminates under compression. Because of the inherently high computational cost of performing such analyses, less rigorous analyses such as thin-film plate analysis were used. The assumptions imposed by plate theory restrict the analysis to the calculation of total strain energy, G(sub t). The objective is to determine the accuracy of thin-film plate analysis by comparing the distribution of G(sub t) calculated using fully three dimensional (3D), thin-film 3D, and thin-film plate analyses. Thin-film 3D analysis is the same as thin-film plate analysis, except 3D analysis is used to model the sublaminate. The 3D stress analyses were performed using the finite element program NONLIN3D. The plate analysis results were obtained from published data, which used STAGS. Strain-energy release rates were calculated using variations of the virtual crack closure technique. The results demonstrate that thin-film plate analysis can predict the distribution of G(sub t) quite well, at least for the configurations considered. Also, these results verify the accuracy of the strain-energy release rate procedure for plate analysis.

Whitcomb, John D.↗
NASA NTRS1993

YBa2Cu3O7 thin films on nanocrystalline diamond films for HTSC bolometer

Superconducting YBa2Cu3O(7-x) films on nanocrystalline diamond thin films have been fabricated. A composite buffer layer system consisting of diamond/Si3N4/YSZ/YBCO was explored for this purpose. The as-deposited YBCO films were superconducting with Tc of about 84 K and a relatively narrow transition width of about 8 K. SEM cross sections of the films showed very sharp interfaces between diamond/Si3N4 and between Si3N4/YSZ. The deposited YBCO film had a surface roughness of about 1000 A, which is suitable for high-temperature superconductive (HTSC) bolometer fabrication. It was also found that preannealing of the nanocrystalline diamond thin films at high temperature was very important for obtaining high-quality YBCO films.

Cui, G.↗
NASA NTRS1993

Diamondlike carbon films as protective coatings for superconducting YBa2Cu3O7 films

We have investigated the use of diamondlike carbon (DLC) films for protecting superconducting YBCO films against degradation from exposure to moisture and acid. YBCO thin films on single crystal LaAlO3 and MgO substrates were deposited by laser ablation followed by DLC encapsulation. DLC films were deposited at pressures ranging from high vacuum to 0.1 Torr He. Substrate temperature was varied from 20 to 100 C during the deposition of DLC. The process compatibility of laser ablation was found convenient to sequentially deposit YBCO and DLC films from high purity stoichiometric targets. Epitaxial YBCO films on (100)LaAlO3 and (100)MgO substrates showed identical superconducting transitions before and after encapsulation by a DLC layer. The encapsulated films showed no degradation due to acid treatment or aging over a period of 45 days.

Ganapathi, L.↗
DOE OSTI2024

Diazonium-Functionalized Silicon Hybrid Photoelectrodes: Film Thickness and Composition Effects on Photoelectrochemical Behavior

Aryl diazonium electrografting is a powerful method for imparting molecular functionality onto various substrates by forming a stable carbon-surface covalent bond. While the high reactivity of the aryl radical intermediate makes this method fast and reliable, it can also lead to the formation of an insulating and disordered multilayer film. These thick films affect electrochemical performance, especially for semiconductor substrates used in photoelectrochemical applications. For this work we studied the effects of film thickness and composition by electrografting in situ-generated aminobenzene diazonium salts onto both n-type and p-type silicon electrodes at fixed potentials. Next, we attached ferrocene to the amine-terminated films and probed their (photo)­electrochemical behavior. Cyclic voltammetry measurements showed decreased electrochemical reversibility with increasing diazonium film thickness; this reversibility was restored when ferrocene was incorporated throughout the film with a layer-by-layer deposition process. Finally, we compared the behavior of dark p-type electrodes to n-type photoelectrodes and observed differences in the electrochemical reversibility that we attribute to the change in potential drop across the two interfaces.

charge transfer↗
DOE OSTI2021

Optimization of Source Material for in-situ Arsenic Doping via Vapor Transport Deposition of CdTe Films

In-situ doping of CdTe/CdSeTe films with arsenic is performed using pre-doped source material prepared by high pressure Bridgman (HPB) melt growth. Arsenic level in the source material is varied from 1018-1020 cm-3. Correspondingly, dopant incorporation in the films prepared using vapor transport deposition (VTD) varied from 3x1017 cm-3–1x1018cm-3. In this range, dopant activation is found to inversely correlate with the dopant incorporation, suggesting compensation. The results from this study indicate film properties can be adjusted by source material.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2024

Giant Apparent Optical Circular Dichroism in Thin Films of Bismuth-Based Hybrid Organic-Inorganic Metal Halide Semiconductor Through Preferred Orientation

Introducing chirality into organic/inorganic hybrid materials can impart chiroptical properties such as circular dichroism. The ability to tune chiroptical properties in self-assembled materials can have important implications for spintronic and optoelectronic applications. Here, a chiral organic cation, (R/S)-4-methoxy-a-methylbenzylammonium, is incorporated to synthesize the bismuth-based hybrid organic-inorganic metal halide semiconductor, (R/S-MeOMePMA)BiI4. Thin films of this Bi-based compound demonstrate large chiroptical responses, with circular dichroism anisotropy (gCD) values up to ˜0.1, close to the highest value observed in another chiral metal-halide semiconductor, (R-MBA2CuCl4). Detailed investigation reveals that this large gCD in (R/S-MeOMePMA)BiI4 is caused by the apparent CD effect. Careful selection of deposition conditions and the concomitant thin-film orientation enables the control of gCD, with maximum value observed when its thin film has a well-crystallized preferred (001) orientation parallel to the substrate. The results support a growing body of evidence that low symmetry plays an important role in achieving unusually large gCD in these chiral metal-halide materials and provides design rules for achieving large chiroptical response via morphology control.

chiroptic response↗
DOE OSTI2025

Thin-Film Fracture Behavior for Diketopyrrolopyrrole Semiconducting Polymeric Films

Fracture energy, which quantifies a material’s resistance to the propagation of a pre-existing crack, is a key parameter for ensuring the mechanical reliability of stretchable organic electronic devices. However, most existing methods, such as a four-point bending fracture energy, utilized for measuring the fracture energy of semiconducting polymeric thin films are complicated by substrate effects, making it challenging to isolate the intrinsic behavior of the film from interfacial influences. In this study, we employed a pseudo free-standing pure shear method to systematically investigate the cohesive fracture energy of poly(diketopyrrolopyrrole-terthiophene) P(DPP-T)-based thin films to examine the effects of nanoconfinement, side chain length, degree of crystallinity, and strain rates. This method effectively eliminates substrate interference, enabling a direct assessment of the cohesive fracture energy of P(DPP-T) thin films. We found that thinner films and those with lower molecular weights exhibited significantly reduced fracture energies due to diminished chain entanglements. Additionally, films with shorter side chains displayed notably higher fracture energies, which were attributed to an increase in the degree of crystallinity. Finally, slower strain rates led to higher fracture energies, consistent with an enhanced stress relaxation. These insights offer practical guidelines for designing mechanically robust semiconducting polymers, contributing to the advancement of reliable, durable, flexible, and wearable electronic devices.

Zhang, Song [Univ. of Southern Mississippi, Hattie↗
DOE OSTI2021

Solvent Processing and Ionic Liquid-Enabled Long-Range Vertical Ordering in Block Copolymer Films with Enhanced Film Stability

Rapid and reliable processing methods for forming ordered block copolymer (BCP) materials with low defect density in a thin film geometry are required for many nanotechnology applications. Vertically aligned BCP structures, in particular, have applications ranging from nanolithography for electronics and photonics to nanoporous membranes for water remediation and novel batteries for flexible electronics. However, the attainment of nearly complete vertical orientational order of the BCP ordered phase remains challenging. Solvent-based techniques, such as direct immersion annealing (DIA) and solvent vapor annealing (SVA), have immense potential for these applications of BCP films, as it allows for tuning of their thermodynamic, structural, and chain mobility driven kinetic properties. We first demonstrate that DIA, using a judicious choice of binary solvent mixtures along with a relatively hydrophobic ionic liquid (IL), induces the rapid vertical ordering in polystyrene-b-polymethylmethacrylate (PS-PMMA) block copolymer in lamellar films. The IL establishes synergy to the binary solvent mixture of toluene and heptane to 1 create a near-neutral solvent environment for attaining the vertical microstructure of the BCP. Next, we show that IL can suppress the de-wetting of the PS-PMMA films to achieve long-range order using SVA in cylindrical films for long annealing times. Both vertical and horizontal morphology is attained in these films by selecting different solvent environments. Furthermore, attaining enhanced vertical and horizontal BCP structure with long-range defect-free order by tuning solvent quality and using additives like IL can render them useful for many nanotech applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗