Search NASA⌕ Search

SEARCH · Search NASA

Results for “FISSION GAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Specifications of FIPD Fission Gas Release Data

All fission gas release data stored in the Fuels Irradiation & Physics Database (FIPD) was originally measured using the Gas Assay, Sample and Recharge (GASR) System in the Hot Fuel Examination Facility (HFEF). It is therefore called GASR data in FIPD. During the measurement of a sample, such as an irradiated EBR-II fuel element/capsule, a pinhole-sized region near the top of the element plenum was melted by a laser. Plenum gas then expanded into a calibrated volume (note: in this document, “sample” and “capsule/element” are used interchangeably consistent with GASR documents in FIPD). The pressure rise in the volume was recorded. Helium backfilling and expansion was then performed to determine the sample (e.g., fuel element plenum) volume using Boyle’s Law and assuming ideal gas behavior at constant temperature. With the plenum volume and the recorded pressure rise, the sample (e.g., fuel element plenum) pressure was derived with assumption of ideal gas law behavior. The plenum volume and pressure as well as the cladding temperature during the measurement were collected (GASR data in FIPD). Other records associated with the fission gas release data include: raw GASR data records including volumes and post-puncture pressures of seal head/sealing head and manifold, calibration data, backfilling gas pressure data, and the data analysis records. A sample(s) of the fission gas released from the plenum was collected by the GASR system into sample bottles. The chemical and isotopic composition of the gas sample was analyzed separately from GASR data, and will be discussed in a separate specification. The plenum volume, pressure, and cladding temperature during the measurement are typically utilized to determine the number of moles of gas in the plenum. This quantity is often compared to the number of moles of gas generated by fission events. However, calculating these values and their associated uncertainty is beyond the scope of this document, as it necessitates additional assumptions. The most important document to understand the FIPD fission gas data is the GASR operational manual (title: Gas Assay, Sample and Recharge System (GASR) operation and maintenance manual, HFEF/N OMM 4381, DOC. NO. W0018-0032-ES-00). This manual provides: (1) description of the GASR and the functions of each component (laser drilling, welding, seal head/sealing head, manifold, vacuum system, sample system, purge and gas tag system, etc.); (2) step-by-step guidance on calibrations, operations, and measurements; and (3) maintenance procedures and other details relating to the structure and operation of the GASR. Note that the original GASR operated until 2020. A new GASR with the same design and measurement methodology was installed in 2021. The specifications of the GASR presented on the HFEF website at this time are consistent with the ones given in the operational manual. The methods to calculate the plenum volume and pressures were not included in the operational manual, but were recorded in the legacy data analysis files. Details of the methods are given in Chapter 3.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effective parameterization of phase-field models of fission gas bubble growth

Fission gas bubbles are one of the most important microstructural features of ceramic nuclear fuels. As gas bubbles grow and interconnect, they allow release of gases, with important consequences for fuel performance. Phase-field modeling has been increasingly used to simulate the evolution of fission gas bubble microstructural because of its capability to capture complex microstructural features. However, computational performance limitations have made it difficult to simulate all the defects present in fuels during operation. For this reason, phase-field models have often simulated only vacancies and used multiple approaches to include the effect of vacancy-interstitial recombination and sinks in a simplified way. Here, we compare some of the most prevalent approaches, including source-only and source/sink. The kinetics of bubble growth using these approaches are analyzed analytically, and simulations with these approaches are compared to a full vacancy-interstitial model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An efficient instance segmentation approach for studying fission gas bubbles in irradiated metallic nuclear fuel

Abstract Gaseous fission products from nuclear fission reactions tend to form fission gas bubbles of various shapes and sizes inside nuclear fuel. The behavior of fission gas bubbles dictates nuclear fuel performances, such as fission gas release, grain growth, swelling, and fuel cladding mechanical interaction. Although mechanical understanding of the overall evolution behavior of fission gas bubbles is well known, lacking the quantitative data and high-level correlation between burnup/temperature and microstructure evolution blocks the development of predictive models and reduces the possibility of accelerating the qualification for new fuel forms. Historical characterization of fission gas bubbles in irradiated nuclear fuel relied on a simple threshold method working on low-resolution optical microscopy images. Advanced characterization of fission gas bubbles using scanning electron microscopic images reveals unprecedented details and extensive morphological data, which strains the effectiveness of conventional methods. This paper proposes a hybrid framework, based on digital image processing and deep learning models, to efficiently detect and classify fission gas bubbles from scanning electron microscopic images. The developed bubble annotation tool used a multitask deep learning network that integrates U-Net and ResNet to accomplish instance-level bubble segmentation. With limited annotated data, the model achieves a recall ratio of more than 90%, a leap forward compared to the threshold method. The model has the capability to identify fission gas bubbles with and without lanthanides to better understand the movement of lanthanide fission products and fuel cladding chemical interaction. Lastly, the deep learning model is versatile and applicable to the micro-structure segmentation of similar materials.

36 MATERIALS SCIENCE↗

Assessment of a mechanistic model in U-Pu-Zr metallic alloy fuel fission-gas behavior simulations

A mechanistic kinetic rate theory model originally developed for the prediction of fission gas behavior in oxide nuclear fuels under steady-state and transient conditions has been assessed to look at its applicability to model fission gas behavior in U-Pu-Zr metallic alloy fuel. In order to capture and validate the underlying physics for irradiated U-Pu-Zr fuels, the mechanistic model was applied to the simulation of fission gas release, fission gas and fission product induced swelling, and the evolution of the gas bubble size distribution in three different fuel zones: the outer {alpha}-U, the intermediate, and the inner {gamma}-U zones. Due to its special microstructural features, the {alpha}-U zone in U-Pu-Zr fuels is believed to contribute the largest fraction of fission gas release among the different fuel zones. It is shown that with the use of small effective grain sizes, the mechanistic model can predict fission gas release that is consistent with (though slightly lower than) experimentally measured data. These simulation results are comparable to the experimentally measured fission gas release since the mechanism of fission gas transport through the densely distributed laminar porosity in the {alpha}-U zone is analogous to the mechanism of fission gas transport through the interconnected gas bubble porosity utilized in the mechanistic model. Detailed gas bubble size distributions predicted with the mechanistic model in both the intermediate zone and the high temperature {gamma}-U zone of U-Pu-Zr fuel are also compared to experimental measurements from available SEM micrographs. These comparisons show good agreements between the simulation results and experimental measurements, and therefore provide crucial guidelines for the selection of key physical parameters required for modeling these two zones. In addition, the results of parametric studies for several key parameters are presented for both the intermediate zone and the {gamma}-U zone simulations. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Experiment to Investigate the On-set of Transient Fission Gas Release Under Simulated LOCA Conditions

Continuing efforts to better understand the phenomenon of transient fission gas release in irradiated commercial light water reactor fuel undergoing a simulated loss of coolant accident (LOCA) will be discussed in this work. During heating associated with LOCA conditions there is an additional release of fission gas beyond what is typically released during steady state operation. The exact timing of this release could impact the cladding balloon and rupture as the LOCA progresses in an actual accident. Recent experiments performed on the upgraded Severe Accident Test Station at Oak Ridge National Laboratory have expanded the current assessment of transient fission gas release. This system evaluates fission gas release by sweeping fission gas out of the LOCA test furnace and into cryogenically cooled cold traps where radioactive noble gas fission products are measured by gamma spectrometry. Additionally, the sweep gas can be monitored by a gas mass spectrometer to provide additional data on noble gas release and changes in the sweep gas atmosphere during heating. Several different conditions have been evaluated that explored the response of irradiated fuel to different thermal ramp conditions and different overpressure conditions. This further confirmed the impact of an overpressure in suppressing transient fission gas release. Further experiments are planned to evaluate the on-set temperature of transient fission gas release under a known overpressure. This test will progressively step through different temperature conditions while maintaining hydrostatic pressure on the fuel that is representative of high burnup fuel conditions. The available results from this type of testing will be discussed. Post-test microscopy will be compared to other transient fission gas release and standard LOCA tests to further understand the microstructural source of transient fission gas release.

Harp, Jason [ORNL] (ORCID:0000000253458440)↗

Fission Gas Monitoring System Efficiency Calibration Summary Report

The Fission Gas Monitoring System was designed to work in conjunction with the Fuel Accident Condition Simulator Furnace and is used to measure fission gas releases during post-irradiation fuel heating tests. A high-purity helium sweep gas is swept past the heated fuel sample in the furnace and routed to a fission gas monitoring system, which cryrogenically traps the krypton (Kr) and xenon (Xe) fission gases. As the radioactive species of the trapped gas decays, high-purity germanium detectors monitor the amount of fission gas in each trap. The primary fission product present in this test is 85Kr, which has a 10.76-year half-life. The presence of 85Kr indicates particle defects and iodine release. There is also the potential for re-irradiating the fuel compacts in the Neutron Radiography Reactor in the Hot Fuel Examination Facility basement. With re-irradiation, it is possible to have xenon fission gas present, specifically 133Xe, which has a 5.243-day half-life. Re-irradiation also produces 131I, which is important for design-basis accidents and regulatory licensing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Documentation, assessment, and improvements of fission gas modeling capabilities in BISON

Fission gas behavior critically affects nuclear fuel performance, influencing thermal conductivity, microstructure, swelling, and fuel-cladding interactions. The Simple Integrated Fission Gas Release and Swelling (Sifgrs) model, implemented within the BISON fuel performance code, provides advanced capabilities for modeling these phenomena. This manuscript reviews and assesses Sifgrs’ modular structure and submodels describing intragranular, intergranular, and release mechanisms. The modular implementation enables rapid improvements as our understanding advances and new fuel forms emerge. After an overview of capabilities, we present a comprehensive validation suite, comparing predictions to experimental data from tests under normal and transient conditions, including reproduction of the Vitanza curve. Results demonstrate Sifgrs’ accuracy, robustness, and applicability. Current limitations and ongoing efforts are discussed, including mechanistic, multiscale modeling, uncertainty quantification, and validation within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, supporting the safe and efficient use of nuclear fuels.

BISON↗

Status of Mechanistic Fission Gas Model in High-Burnup Fuel

A desire to increase fuel burnup to decrease the cost of nuclear power plants has led to significant interest within the nuclear industry to develop improved understanding of high-burnup nuclear fuel microstructure and the potential for fuel fragmentation, relocation, and dispersal that contribute to burnup and safe operating limits. This milestone report describes joint research activities and program planning to develop mechanistic models for high-burnup UO 2 microstructure, including both intra- and intergranular gas bubble populations and fission gas release, specifically associated with transient release. This model development is being extensively leveraged against a rapidly growing experimental database of high-fidelity electron microscopy characterization of commercial, light water reactor fuel in the as-irradiated condition as well as that following simulated loss-of-coolant test conditions. This report describes the status of model development, highlights recent microstructural data, and summarizes the data needs to complete initial development and experimental validation of mechanistic models of fission gas and microstructural evolution at high burnup, as well as transient fission gas release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High Burnup Transient Fission Gas Release Testing and Post-Test Examinations

The contribution of transient fission gas release (tFGR) to the burst behavior of high burnup fuel during a loss of coolant accident (LOCA) for commercial light water reactors is a complex phenomenon that is not fully understood. During the temperature ramp associated with a LOCA, there is significant additional transient fission gas release in excess of the steady state fission gas release from normal operation. An addition to the Oak Ridge National Laboratory Severe Accident Test Station (SATS) was created to explore the different conditions that impact transient fission gas release. Four tests on commercially irradiated zirconium clad uranium dioxide nuclear fuel were performed to support transient fission gas release study. These experiments and their post-test analyses are discussed. The first test on high burnup fuel revealed a LOCA relevant transient fission gas release of 5.3% for an unpressurised segment. Subsequent tests have measured transient fission gas release at different conditions that span from 4.8% to 14.4 % transient fission gas release.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An effective numerical algorithm for intra-granular fission gas release during non-equilibrium trapping and resolution

Both fission gas release and gaseous swelling in nuclear fuel are driven by the transport of fission gas from within the fuel grains to grain boundaries (intra-granular fission gas release). The process involves gas atom diffusion in conjunction with trapping in and resolution from intra-granular bubbles, and is described mathematically by a system of two partial differential equations (PDE). Following Speight, under the assumption of equilibrium between trapping and resolution (quasi-stationary approximation) the system can be reduced to a single diffusion equation with an effective diffusion coefficient. Numerical solutions used in engineering fuel performance calculations invariably rely on this simplification. First, we investigate the validity of the quasi-stationary approximation compared to the solution of the general system of PDEs. Results demonstrate that the approximation is valid under most conditions of practical interest, but is inadequate to model intra-granular fission gas release during rapid transients to relatively high temperatures such as postulated reactivity initiated accidents (RIA). Then, we develop a novel numerical algorithm for the solution of the general problem in time-varying conditions. We verify the PolyPole-2 algorithm against a reference finite difference solution for a large number of randomly generated operation histories including prototypical RIA transients. Results demonstrate that PolyPole-2 captures the solution of the general PDE system with a high accuracy and a low computational cost. As a result, the PolyPole-2 algorithm overcomes the quasi-stationary approximation and the concept of an effective diffusion coefficient for the solution of the intra-granular fission gas release problem in nuclear fuel analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Compare predictions of transient fission gas release by empirical and mechanistic models to experiments in high burnup UO 2 fuel

Understanding and predicting fuel performance at high burnup require improving our understanding of transient fission gas release. High-burnup operations enable new mechanisms of fission gas release, which affect fuel performance. The Nuclear Regulatory Commission has recently published its interpretation of existing fuel fragmentation, relocation, and dispersal data in a research information letter. There, transient fission gas release was identified as one of the main factors that contributes to fuel fragmentation, relocation, and dispersal, and therefore limits fuel extension to high burnup. However, transient fission gas release is a complex phenomenon that cannot be fully described by simple empirical descriptions. This report summarizes the development of a mechanistic model for high-burnup transient fission gas release in the fuel performance code BISON. This research was supported by the Nuclear Energy Advanced Modeling and Simulation program during fiscal year 2023 to improve our understanding of high-burnup transient fission gas release and ability to predict it as a function of operation history. To support the development of a mechanistic transient fission gas release model, the existing Simple Integrated Fission Gas Release and Swelling (Sifgrs) model in BISON has been completely refactored to make it more modular and extensible. This effort supports the model's application to high-burnup conditions, its extension to other fuel forms, and the continuous improvement of its current features. Once refactoring was completed, models for high-burnup structure formation, fission gas transfer from non-restructured fuel to high-burnup structure, high-burnup structure intragranular and intergranular fission gas behavior, high-burnup structure bubble evolution, fuel pulverization, and the resulting transient fission gas release were tested and implemented in the Simple Integrated Fission Gas Release and Swelling (Sifgrs) model or tightly coupled to it. The new mechanistic model was then compared to an empirical model developed in parallel by a Nuclear Energy University Program project using a Studsvik high-burnup loss-of-coolant-accident assessment case. Finally, the report details the preliminary BISON results for a benchmark activity organized by the Nuclear Energy Agency to evaluate fuel performance codes' predictive capabilities for burst fission gas release. This work represents an important step toward a mechanistic understanding of fission gas release in high-burnup conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multiscale modeling of fission gas behavior in U 3 Si 2 under LWR conditions

In this work, we present a model of fission gas behavior in U 3 Si 2 under light water reactor (LWR) conditions for application in engineering fuel performance codes. The model includes components for intra-granular and inter-granular behavior of fission gases. The intra-granular component is based on cluster dynamics and computes the evolution of intra-granular fission gas bubbles and swelling coupled to gas diffusion to grain boundaries. The inter-granular component describes the evolution of grain-boundary fission gas bubbles coupled to fission gas release. Given the lack of experimental data for U 3 Si 2 under LWR conditions, the model is informed with parameters calculated via atomistic simulations. In particular, we derive fission gas diffusivities through density functional theory calculations, and the re-solution rate of fission gas atoms from intra-granular bubbles through binary collision approximation calculations. Further, the developed model is applied to the simulation of an experiment for U 3 Si 2 irradiated under LWR conditions available from the literature. Results point out a credible representation of fission gas swelling and release in U 3 Si 2 . Finally, we perform a sensitivity analysis for the various model parameters. Based on the sensitivity analysis, indications are derived that can help in addressing future research on the characterization of the physical parameters relative to fission gas behavior in U 3 Si 2 . The developed model is intended to provide a suitable infrastructure for the engineering scale calculation of fission gas behavior in U 3 Si 2 that exploits a multiscale approach to fill the experimental data gap and can be progressively improved as new lower-length scale calculations and validation data become available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling Fission Gas Behaviour with the BISON Fuel Performance Code

The behavior of fission gases (Xe, Kr) is of critical importance to nuclear fuel performance, because it determines both the amount of fuel swelling and the quantity of fission gas released to the fuel rod plenum. It follows that accurate models of fission gas behavior need to be developed for the calculation of fission gas swelling and release in fuel performance codes, such as the BISON code developed at Idaho National Laboratory (INL). To this end, the fission gas behavior model included in BISON is being continually extended and improved. In the present contribution, we give an account of the most recent developments and results on modeling fission gas behavior in uranium dioxide fuel with BISON.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructure-Level Modeling of Stage 3 Fission Gas Release in UO 2 Fuel

A new phase-field model of fission gas bubble evolution was developed and applied to gain an improved understanding of the microstructure-level processes leading to fission gas release from nuclear fuel and to inform improvements to the fission gas release model used in BISON. The phase-field model simulates the evolution of multiple fuel grains and intergranular bubbles simultaneously, tracks the local concentration of vacancies and gas atoms, and includes the effect of hydrostatic gas pressure on the surrounding fuel matrix. This represents the most realistic microstructure-level model of fission gas bubbles developed to date. The model was used to simulate the growth of grain face and grain edge bubbles in a hexagonally periodic 3D grain structure, which contains multiple grain boundaries and triple junctions. The coverage of grain boundaries and triple junctions by fission gas bubbles was calculated as a function of time. Preliminary results suggest that grain edge bubbles do not release a significant amount of gas prior to gas release by grain face bubbles, which supports the assumptions of the fission gas release model currently used in BISON. However, the simulations should be improved by including a physically realistic number of grain edge bubbles in the initial conditions before definitive conclusions can be drawn.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainty and sensitivity analysis of fission gas behavior in engineering-scale fuel modeling

The role of uncertainties in fission gas behavior calculations as part of engineering-scale nuclear fuel modeling is investigated using the BISON fuel performance code and a recently implemented physics-based model for the coupled fission gas release and swelling. Through the integration of BISON with the DAKOTA software, a sensitivity analysis of the results to selected model parameters is carried out based on UO2 single-pellet simulations covering different power regimes. The parameters are varied within ranges representative of the relative uncertainties and consistent with the information from the open literature. The study leads to an initial quantitative assessment of the uncertainty in fission gas behavior modeling with the parameter characterization presently available. Also, the relative importance of the single parameters is evaluated. Moreover, a sensitivity analysis is carried out based on simulations of a fuel rod irradiation experiment, pointing out a significant impact of the considered uncertainties on the calculated fission gas release and cladding diametral strain. The results of the study indicate that the commonly accepted deviation between calculated and measured fission gas release by a factor of 2 approximately corresponds to the inherent modeling uncertainty at high fission gas release. Nevertheless, higher deviations may be expected for values around 10% and lower. Implications are discussed in terms of directions of research for the improved modeling of fission gas behavior for engineering purposes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

OPTIMIZATION OF FAST FISSION GAS RELEASE MODEL PARAMETERS USING MACHINE LEARNING ACCELERATED EVOLUTIONARY ALGORITHMS

Fission gas release models used in FRAPCON and FAST are based on equations that describe the physical transport phenomena that control release from the fuel pellet to the rod void volume of fission gas produced during irradiation. Although these models are physically based, many of the parameters that control the release such as the impact of burnup on diffusion and bubble formation and saturation are critical to the accurate prediction of fission gas release, but cannot be measured in any quantitative way. To overcome this problem, these parameters have been empirically derived to provide a best fit to the available data that includes rod puncture data and electron probe microanalysis (EMPA) and X-ray fluorescence (XRF) data of radial location of residual gas within the pellet. In general, a heuristic approach for deriving these parameters via practical implementation of expert analyses on just a few dependent variables has been shown to perform quite well in most situations. In this paper, we present an approach for applying machine learning to expedite model development. This approach is based on developing a deep artificial neural network which describes FRAPCON’s fission gas release models, and optimizes parameters by a differential evaluation algorithm. This approach allows us to quickly and accurately tune physical models based on expert judgment, and works as a human-in-the-loop approach, to assist the modeler in identifying and addressing regions of high uncertainty in a multi-parameter space. Results of the updated fission gas release model will be shown for all the FAST assessment data.

Johns, Jesse M.↗

HOT CELL SYSTEM FOR DETERMINING FISSION GAS RETENTION IN METALLIC FUELS

A system has been developed to perform measurements on irradiated, sodium bonded-metallic fuel elements to determine the amount of fission gas retained in the fuel material after release of the gas to the element plenum. During irradiation of metallic fuel elements, most of the fission gas developed is released from the fuel and captured in the gas plenums of the fuel elements. A significant amount of fission gas, however, remains captured in closed porosities which develop in the fuel during irradiation. Additionally, some gas is trapped in open porosity but sealed off from the plenum by frozen bond sodium after the element has cooled in the hot cell. The Retained fission Gas (RFG) system has been designed, tested and implemented to capture and measure the quantity of retained fission gas in characterized cut pieces of sodium bonded metallic fuel. Fuel pieces are loaded into the apparatus along with a prescribed amount of iron powder, which is used to create a relatively low melting, eutectic composition as the iron diffuses into the fuel. The apparatus is sealed, evacuated, and then heated to temperatures in excess of the eutectic melting point. Retained fission gas release is monitored by pressure transducers during the heating phase, thus monitoring for release of fission gas as first the bond sodium melts and then the fuel. A separate hot cell system is used to sample the gas in the apparatus and also characterize the volume of the apparatus thus permitting the calculation of the total fission gas release from the fuel element samples along with analysis of the gas composition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗