Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLEXIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Lattice expansion and ligand twist during CO2 adsorption in flexible Cu bipyridine metal–organic frameworks

Flexible metal–organic frameworks (MOFs) can show exceptional selectivity and capacity for adsorption of CO 2 . The incorporation of CO 2 into flexible MOFs that have Cu 2+ coordination centers and organic pillar ligands is accompanied by a distortion of the framework lattice arising from chemical interactions between these components and CO 2 molecules. CO 2 adsorption yields a reproducible lattice expansion that is enabled by the rotation of the pillar ligands. The structures of Cu 2 (pzdc) 2 (bpy) and Cu 2 (pzdc) 2 (bpe), CPL-2 and CPL-5, were evaluated using in situ synchrotron X-ray powder diffraction at room temperature at CO 2 gas pressures up to 50 atm. The structural parameters exhibit hysteresis between pressurization and depressurization. The pore volume within CPL-2 and CPL-5 increases at elevated CO 2 pressure due to a combination of the pillar ligand rotation and the overall expansion of the lattice. Volumetric CO 2 adsorption measurements up to 50 atm reveal adsorption behavior consistent with the structural results, including a rapid uptake of CO 2 at low pressure, saturation above 20 atm, and hysteresis evident as a retention of CO 2 during depressurization. Finally, a significantly greater CO 2 uptake is observed in CPL-5 in comparison with predictions based on CO 2 pressure-induced expansion of the pore volume available for adsorption, indicating that the flexibility of the CPL structures is a key factor in enhancing adsorption capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1972

Concepts for a theoretical and experimental study of lifting rotor random loads and vibrations. Phase 6-A: Effects of blade torsion, of blade flap bending flexibility and of rotor support flexibility on rotor stability and random response

The effects of lifting rotor blade torsion, blade flap bending flexibility and rotor support flexibility on rotor stability and random response are described. The subjects discussed are: (1) blade representation and method of analysis, (2) random gust response statistics for coupled torsion-flapping rotor blade vibrations, (3) flap bending corrections to the rigid blade analysis of lifting rotors, and (4) effects of rotor support flexibility. The response of linear periodically time varying systems to random excitation is examined.

Hohenemser, K. H.↗
NASA NTRS1991

Control of a small working robot on a large flexible manipulator for suppressing vibrations: Development of a robust control law for flexible robot and it's stability analysis

Researchers developed a robust control law for slow motions for the accurate trajectory control of a flexible robot. The control law does not need larger velocity gains than position gains, which some researchers need to ensure the stability of a rigid robot. Initial experimentation for the Small Articulated Manipulator (SAM) shows that control laws that use smaller velocity gains are more robust to signal noise than the control laws that use larger velocity gains. Researchers analyzed the stability of the composite control law, the robust control for the slow motion, and the strain rate feedback for the fast control. The stability analysis was done by using a quadratic Liapunov function. Researchers found that the flexible motion of links could be controlled by relating the input force to the flexible signals which are sensed at the near tip of each link. The signals are contaminated by the time delayed input force. However, the effect of the time delayed input force can be reduced by giving a certain configuration to the SAM.

Soo, Han Lee↗
NASA NTRS2001

The Evolution of Flexible Insulation as Thermal Protection Systems for Reusable Launch Vehicles: AFRSI (Advanced Flexible Reusable Surface Insulation) to CRI (Conformal Reusable Insulation)

This viewgraph presentation gives an overview of the evolution of flexible insulation as a thermal protection system for reusable launch vehicles, Advanced Flexible Reusable Surface Insulation (AFRSI) to Conformal Reusable Insulation (CRI). Details are given on the approved use of AFRIS on the Shuttle Orbiter in June 1980, the first flight of AFRIS on STS-6, windward blanket development, composite flexible blanket insulation, and flight demonstrations.

Rezin, Marc↗
DOE OSTI2020

Flexible Electronics: Flexible Electrochemical Bioelectronics: The Rise of In Situ Bioanalysis (Adv. Mater. 15/2020)

Flexible electrochemical bioelectronics enables in situ quantification of a variety of chemical constituents present in the human body. It holds great promise for personalized health monitoring owing to its inherent wearability, high performance, and low cost. In article number 1902083, Wei Gao, Ali Javey, and co-authors summarize recent key innovations in flexible electrochemical bioelectronics from electrochemical sensing modalities, materials, systems, fabrication, to applications and discuss the challenges and opportunities in this field moving forward toward future preventive and personalized medicine devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Flexible Financial Credit Agreements: NREL Low- and Moderate-Income Solar Flexible Financing Credit Agreement Rubric

Flexible Financial Credit Agreements is a broad term used to describe a suite of solar products with innovative features not currently offered in traditional solar financing programs. The NREL Low- and Moderate-Income Solar Flexible Financing Credit Agreement Rubric brief document is designed to help evaluate innovative strategies for increasing the accessibility of solar and increasing adoption among LMI households. The rubric is modeled after a version developed to support plug-in electric vehicle policy adoption (NASEO and Cadmus).

ENERGY PLANNING, POLICY, AND ECONOMY,SOLAR ENERGY↗
DOE OSTI2020

Flexible and Modular Simultaneous Modeling of Flow and Reactive Transport in Rivers and Hyporheic Zones

Investigations of coupled multiphysics processes in rivers and hyporheic zones have extensively used numerical models. Most existing models use a sequential, one-way coupling between the surface and subsurface domains. Such one-way coupling potentially introduces error. To overcome this, a fully coupled model, hyporheicFoam, was developed using the open-source computational platform OpenFOAM. It captures the coupled flow and multicomponent reactive transport processes within both surface and subsurface domains and across their interface. The coupling between two domains is implemented by mapping conservative flux boundary conditions at the interface through an iterative algorithm. Reactive transport is enabled by specifying a reaction network. To start, we have implemented reaction kinetics following the double Monod-type model with inhibition. The model capability is illustrated through modeling of both conservative and reactive hyporheic flow and transport through dune bedforms. With the novel coupled model, it is now possible to quantify reactions wherein the reactants and products are constantly exchanging between domains and have feedbacks. hyporheicFoam can simulate large, three-dimensional cases owing to the computational flexibility and power offered by the code structure and parallel design of OpenFOAM.

58 GEOSCIENCES↗
DOE OSTI2020

COHORT: Coordination of Heterogeneous Thermostatically Controlled Loads for Demand Flexibility

Demand flexibility is increasingly important for power grids. Careful coordination of thermostatically controlled loads (TCLs) can modulate energy demand, decrease operating costs, and increase grid resiliency. We propose a novel distributed control framework for the Coordination Of HeterOgeneous Residential Thermostatically controlled loads (COHORT). COHORT is a practical, scalable, and versatile solution that coordinates a population of TCLs to jointly optimize a grid-level objective, while satisfying each TCL’s end-use requirements and operational constraints. To achieve that, we decompose the grid-scale problem into subproblems and coordi- nate their solutions to find the global optimum using the alternating direction method of multipliers (ADMM). The TCLs’ local problems are distributed to and computed in parallel at each TCL, making COHORT highly scalable and privacy-preserving. While each TCL poses combinatorial and non-convex constraints, we characterize these constraints as a convex set through relaxation, thereby making COHORT computationally viable over long planning horizons. After coordination, each TCL is responsible for its own control and tracks the agreed-upon power trajectory with its preferred strategy. In this work, we translate continuous power back to discrete on/off actuation, using pulse width modulation. COHORT is generalizable to a wide range of grid objectives, which we demonstrate through three distinct use cases: generation following, minimizing ramping, and peak load curtailment. In a notable experiment, we validated our approach through a hardware-in-the-loop simulation, including a real-world air conditioner (AC) controlled via a smart thermostat, and simulated instances of ACs modeled after real-world data traces. During the 15-day experimental period, COHORT reduced daily peak loads by an average of 12.5% and maintained comfortable temperatures.

demand response↗
NASA NTRS1975

Flexible rotor balancing by the influence coefficient method: Multiple critical speeds with rigid or flexible supports

Experimental tests were conducted to demonstrate the ability of the influence coefficient method to achieve precise balance of flexible rotors of virtually any design for operation through virtually any speed range. Various practical aspects of flexible-rotor balancing were investigated. Tests were made on a laboratory quality machine having a 122 cm (48 in.) long rotor weighing 50 kg (110 lb) and covering a speed range up to 18000 rpm. The balancing method was in every instance effective, practical, and economical and permitted safe rotor operation over the full speed range covering four rotor bending critical speeds. Improved correction weight removal methods for rotor balancing were investigated. Material removal from a rotating disk was demonstrated through application of a commercially available laser.

Tessarzik, J. M.↗
NASA NTRS1991

Centralized, decentralized, and independent control of a flexible manipulator on a flexible base

The dynamics and control of a flexible manipulator arm with payload mass on a flexible base in space are considered. The controllers are provided by one torquer at the center of the base and one torquer at the connection joint of the robot and the base. The nonlinear dynamics of the system is modeled by applying the finite element method and Lagrangian formula. Three control strategies are considered and compared, i.e., centralized control, decentralized control, and independent control. All these control designs are based on the linear quadratic regulator theory. A mathematical decomposition is used in the decentralization process so that the coupling between the subsystems is weak, while a physical decomposition is used in the independent control design process. For both the decentralized and the independent controls, the stability of the overall linear system is checked before a numerical simulations is initiated. Two numerical examples show that the response of the independent control system are close to those of the centralized control system, while the responses of the decentralized control system are not.

Li, Feiyue↗
DOE OSTI2021

Self-Assembly of Flexible Linear–Semiflexible Bottlebrush–Flexible Linear Triblock Copolymers

Block copolymer (BCP) self-assembly is a fundamental process in which incompatible blocks spontaneously form organized microstructures with broad practical applications. Classical understanding is that the domain spacing is limited by the contour length of the polymer backbone. Here, using a combination of molecular design, chemical synthesis, small-/wide-angle X-ray scattering, transmission electron microscopy, and electron tomography, we discover that this molecular picture does not hold for architecturally semiflexible BCPs. For strongly segregated linear–semiflexible bottlebrush–linear triblock copolymers, the size of the bottlebrush domain can be twice the bottlebrush backbone contour length. The mechanism of such anomalous self-assembly is likely that the interfacial repulsion between the incompatible blocks is large enough to pull a part of the linear end blocks into the bottlebrush domain. This effectively increases the bottlebrush domain size. Moreover, the semiflexible bottlebrush widens the regime for the cylinder morphology that is associated with the volume fraction of the end blocks fC SFB ∈ (0.10, >0.41). This window is much wider than that for flexible linear BCPs, fC F ∈ (0.14, 0.35), and that predicted by the recent self-consistent field theory for linear-bottlebrush BCPs of the same chemistry and molecular architecture. Finally, our experimental findings reveal previously unrecognized mechanisms for the self-assembly of architecturally complex BCPs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Machine-learning-aided cognitive reconfiguration for flexible-bandwidth HPC and data center networks [Invited]

This paper proposes a machine-learning (ML)-aided cognitive approach for effective bandwidth reconfiguration in optically interconnected datacenter/high-performance computing (HPC) systems. The proposed approach relies on a Hyper-X-like architecture augmented with flexible-bandwidth photonic interconnections at large scales using a hierarchical intra/inter-POD photonic switching layout. We first formulate the problem of the connectivity graph and routing scheme optimization as a mixed-integer linear programming model. A two-phase heuristic algorithm and a joint optimization approach are devised to solve the problem with low time complexity. Then, we propose an ML-based end-to-end performance estimator design to assist the network control plane with intelligent decision making for bandwidth reconfiguration. Numerical simulations using traffic distribution profiles extracted from HPC applications traces as well as random traffic matrices verify the accuracy performance of the ML design estimator ( < <#comment/> 9 % <#comment/> error) and demonstrate up to 5 × <#comment/> throughput gain from the proposed approach compared with the baseline Hyper-X network using fixed all-to-all intra/inter-portable data center interconnects.

Chen, Xiaoliang (ORCID:0000000278056237)↗
NASA NTRS1969

Dynamic characteristics of a variable-mass flexible missile: Dynamics of a two-stage variable-mass flexible rocket

The dynamic characteristics of two-stage slender elastic body were investigated. The first stage, containing a solid-fuel rocket, possesses variable mass while the second stage, envisioned as a flexible case, contains packaged instruments of constant mass. The mathematical formulation was in terms of vector equations of motion transformed by a variational principle into sets of scalar differential equations in terms of generalized coordinates. Solutions to the complete equations were obtained numerically by means of finite difference techniques. The problem has been programmed in the FORTRAN 4 language and solved on an IBM 360/50 computer. Results for limited cases are presented showing the nature of the solutions.

Meirovitch, L.↗