Search NASA⌕ Search

SEARCH · Search NASA

Results for “FREE CONVECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Computation of solid/liquid phase change including free convection - Comparison with data

A computational model is presented for solid/liquid phase-change energy transport including free convection fluid flow in the liquid phase. The computational model considers the velocity components of all nonliquid control volumes to be zero but fully solves the coupled mass-momentum problem within the liquid. The thermal energy model includes the entire domain and employs an enthalpy-like model and a recently developed method for handling the phase-change interface nonlinearity. Convergence studies are performed and comparisons made with experimental data for two different problems. Grid independence is achieved, and the comparison with experimental data indicates excellent quantitative prediction of the melt fraction evolution. Qualitative data are also provided as velocity vector and isotherm plots. The computational costs incurred are quite low by comparison with other models.

Schneider, G. E.↗
NASA NTRS1979

Radiative and free convective heat transfer from a containerless sphere

A mathematical model is derived for heat loss due to radiation and free convection for a small copper sphere (approximately 0.3 to 0.4 cm diameter) cooled by a helium-argon gas mixture. A FORTRAN program written to simplify calculations and extend the range of applicability to experimentation is presented. Pressures used were less than 400 torr, and resulting temperatures ranged from 500 to 4600 K. Comparison of results for initial cooling by the gas mixture with experimental data showed a 5 percent error for temperature values and a 2.7 percent error for the temperature difference caused by the cooling. Results indicate that the accuracy could be increased significantly by using better estimates for thermal conductivities.

Johnson, K.↗
NASA NTRS1950

Analysis of turbulent free-convection boundary layer on flat plate

A calculation was made for the flow and heat transfer in the turbulent free-convection boundary layer on a vertical flat plate. Formulas for the heat-transfer coefficient, boundary layer thickness, and the maximum velocity in the boundary layer were obtained.

Eckert, E R G↗
NASA NTRS1955

Experimental Investigation of Free-Convection Heat Transfer in Vertical Tube at Large Grashof Numbers

Report presents the results of an investigation conducted to study free-convection heat transfer in a stationary vertical tube closed at the bottom. The walls of the tube were heated, and heated air in the tube was continuously replaced by fresh cool air at the top. The tube was designed to provide a gravitational field with Grashof numbers of a magnitude comparable with those generated by the centrifugal field in rotating-blade coolant passages (10(8) to 10(13)). Local heat-transfer coefficients in the turbulent-flow range and the temperature field within the fluid were obtained.

Eckert, E R G↗
NASA NTRS1974

Magneto-fluid-mechanics free convection turbulent flow

The present work is an experimental study of the influence of a uniform magnetic field on the structure of a free convection turbulent boundary layer in a conducting fluid. The boundary layer was formed along the heated vertical wall of a cell. The applied magnetic field was normal to the wall. The measured mean temperature profiles, temperature turbulent intensity distributions, and temperature spectra along the wall, indicated that transition from turbulent to laminar flow occurs at a constant value of the ratio (Rayleigh number)/(Hartmann number). The study of the recorded spectra indicated that the presence of the magnetic field enhances the mechanism of turbulent suppression due to the buoyancy forces. Finally, a possible mechanism by which turbulence is suppressed by the presence of a magnetic field is discussed.

Papailiou, D. D.↗
NASA NTRS1954

Heat Transfer by Free Convection from Horizontal Cylinders in Diatomic Gases

The case of the horizontal cylinder is of particular importance in the study of heat transfer by free convection for the following reasons: In the first place, next to the rectangular plate it represents the simplest two-dimensional case; and second, a very wide range of measurements is possible, from the finest electrically heated glow lamp wires to pipes heated by liquids or gases flowing through them.

THEORIES - HEAT TRANSMISSION↗
NASA NTRS1951

Analysis of turbulent free-convection boundary layer on flat plate

With the use of Karman's integrated momentum equation for the boundary layer and data on the wall-shearing stress and heat transfer in forced-convection flow, a calculation was carried out for the flow and heat transfer in the turbulent free-convection boundary layer on a vertical flat plate. The calculation is for a fluid with a Prandtl number that is close to 1. A formula was derived for the heat-transfer coefficient that was in good agreement with experimental data in the range of Grashof numbers from 10sup10 to 10sup12. Because of the good agreement between the theoretical formula and the experimental data, the formula may be used to obtain data for high Grashof numbers. The calculation also yielded formulas for the maximum velocity in the boundary layer and for boundary-layer thickness.

Eckert, E R G↗
NASA NTRS1981

Laminar free convection boundary layer heat transfer over non-isothermal surface

Accurate heat transfer results are provided for the case of nonisothermal objects. A steady, laminar, free convection boundary layer flow over two-dimensional or rotationally symmetrical bodies of nonuniform surface temperature situated in an ambient fluid of undisturbed temperature is considered analytically. The surface heat flux is given in terms of the Nusselt number and wall derivatives of universal functions for Prandtl numbers of 0.72 and 100 are provided. The method is shown to be valid up to a temperature/radius ratio of 130 deg.

Lin, F. N.↗
NASA NTRS1959

Details of Exact Low Prandtl Number Boundary-Layer Solutions for Forced and For Free Convection

A detailed report is given of exact (numerical) solutions of the laminar-boundary-layer equations for the Prandtl number range appropriate to liquid metals (0.003 to 0.03). Consideration is given to the following situations: (1) forced convection over a flat plate for the conditions of uniform wall temperature and uniform wall heat flux, and (2) free convection over an isothermal vertical plate. Tabulations of the new solutions are given in detail. Results are presented for the heat-transfer and shear-stress characteristics; temperature and velocity distributions are also shown. The heat-transfer results are correlated in terms of dimensionless parameters that vary only slightly over the entire liquid-metal range. Previous analytical and experimental work on low Prandtl number boundary layers is surveyed and compared with the new exact solutions.

Sparrow, E. M.↗
NASA NTRS2001

The Impact on Simulated Storm Structure and Intensity of Variations in the Lifted Condensation Level and the Level of Free Convection

The sensitivities of convective storm structure and intensity to changes in the altitudes of the prestorm environmental lifted condensation level and level of free convection axe studied using a full-physics three-dimensional cloud model. Matrices of simulations are conducted for a range of LCL=LFC altitudes, using a single moderately-sheared curved hodograph trace in conjunction with 1 convective available potential energy values of either 800 or 2000 J/kg, with the matrices consisting of all four combinations of two distinct choices of buoyancy and shear profile shape. For each value of CAPE, the LCL=LFC altitudes are also allowed to vary in a series of simulations based on the most highly compressed buoyancy and shear profiles for that CAPE, with the environmental buoyancy profile shape, subcloud equivalent potential temperature, subcloud lapse rates of temperature and moisture, and wind profile held fixed. For each CAPE, one final simulation is conducted using a near optimal LFC, but a lowered LCL, with a neutrally buoyant environmental thermal profile specified in between. Results show that, for the buoyancy-starved small-CAPE environments, the simulated storms are supercells and are generally largest and most intense when LCL=LFC altitudes lie in the approximate range 1.5-2.5 km above the surface. The simulations show similar trends for the shear-starved large-CAPE environments, except that conversion from supercell to multicell morphology frequently occurs when the LCL is high. For choices of LCL=LFC height within the optimal 1.5-2.5 km range, peak storm updraft overturning efficiency may approaches unity relative to parcel theory, while for lower LCL=LFC heights, overturning efficiency is reduced significantly. The enhancements of overturning efficiency and updraft diameter with increasing LFC height are shown to be the result of systematic increases in the mean equivalent potential temperature of the updraft at cloud base. For the shear-starved environments, the tendency for outflow dominance is eliminated, but a large overturning efficiency maintained, when a low LCL is used in conjunction with a high LFC. The result regarding outflow dominance at high LCL is consistent with expectations, but the beneficial effect of a high LFC on convective overturning efficiency has not previously been widely recognized. The simulation findings here also appear to be consistent with statistics from previous severe storm environment climatologies, but provide a new framework for interpreting those statistics.

McCaul, Eugene W., Jr.↗
NASA NTRS1972

The effect of gravity induced free convection upon the melting phenomena of a finite paraffin slab for thermal control

Two theoretical models were developed to predict the thermal response of the phase change material to a given hot plate temperature. A two-dimensional pure conduction model was developed to predict the melting of the phase change material when heat transfer was a function of conduction. A combined conduction-convection model, also two-dimensional, was developed to predict the phase change phenomena when heat transfer was a function of conduction and gravity-induced free convection. Both models were solved using explicit finite difference approximations on a digital computer. The experimental equipment consisted of a rectangular cell utilizing a heat chamber, an expansion chamber, and a test chamber; a sixteen channel multipoint recorder, and a fluid flow system. The recorder monitered hot and cold plate temperatures and interior node temperatures at two second intervals. A comparison of theoretical temperature profiles and experimental temperature profiles is presented for six runs at various angles of inclination of the test cell with respect to the horizontal direction. A detailed discussion of results is presented.

Bain, R. L.↗
NASA NTRS1954

Kinetic Study of Mass Transfer by Sodium Hydroxide in Nickel Under Free-convection Conditions /by Don R. Mosher and Robert A. Lad

An investigation was conducted using static capsules fabricated from "L" nickel tubing to determine the effect of temperature level, temperature gradient, and test duration on corrosion and mass transfer by molten sodium hydroxide under free-convection conditions. A base temperature range from 1000 degrees to 1600 degrees F with temperature differences to 500 degrees was studied. The rate of mass transfer was found to be strongly dependent on both temperature level and gradient. The rate shows little tendency to decrease for test durations up to 200 hours, although the concentration of nickel in the melt approaches a limited value after 100 hours.

MATERIALS, PROPERTIES - CORROSION RESISTANCE↗
NASA NTRS1980

Free convection in enclosures exposed to compressive heating

An experimental study of heat transfer in a vertical annulus and a three-dimensional gap used to establish the influence of compressive heating on the convective process in enclosures is presented. Test runs were made using helium gas with compressive rates of 6, 15, and 30 psi/min. Temperature and pressure histories were reduced to film coefficients based on nodal modeling of the test geometries. The data are correlated in terms of free convection parameters. The heat transfer correlations show virtually no influence of compression rate and only a slight dependence on geometry. The correlations will be applied to the design of a vented Galileo mission descent module parachuting into the Jupiter atmosphere.

Bobco, R. P.↗
NASA NTRS1987

Modeling free convective gravitational effects in chemical vapor deposition

In this paper, a combined fluid-mechanics, mass-transport, and chemistry model describing CVD in an open-tube atmospheric-pressure flow reactor is developed. The model allows gas-phase reactions to proceed to equilibrium and accounts for finite reaction rates at the surface of the deposition substrate. This model is a useful intermediate step toward a model employing fully rate-limited chemistry. The model is used to predict the effects of free convection on flow patterns, temperature and species-concentration profiles, and local deposition rates for silicon deposited by silane pyrolysis. These results are discussed in terms of implications for CVD of silicon and other compounds, microgravity studies, and techniques for testing and validating the model.

Stinespring, C. D.↗
NASA NTRS1973

Development and characteristics of free convection in the clear air as seen by radar and aircraft

Observations of the development of a convective field in clear air were made simultaneously using radar and an instrumented aircraft. The growth of the field as seen by the radar was compared with the characteristics of the temperature and humidity measurements made by aircraft at various times and locations within the convective depth. Probability distributions of the temperature and mixing ratio fluctuations exhibit distinct, identifiable characteristics for different regions within the field. The altitude of the aircraft measurement, referenced to the maximum altitude of the convective field at the time of the measurement, was found to be a usable parameter in the comparison of aircraft data and in the characterization of convective field growth. Using the relative height parameter, it was found that the area covered by convective cells (modified air) varies linearly with height in the upper reaches of the convective field. The characteristics of individual cells as seen by the radar and as deduced from the aircraft measurements are also discussed.

Konrad, T. G.↗