Search NASA⌕ Search

SEARCH · Search NASA

Results for “FREE FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

An experimental study of free surface deformation in oscillatory thermocapillary flow

Free surface deformation of a test fluid induced by steady and oscillatory thermocapillary flow in a small cylindrical container (diameter = 4.8 mm) is studied experimentally. The fluid (2 Cs oil) is heated by a cylindrical wire (diameter = 0.48 mm) placed along the centerline of the cylinder. The relative displacement and oscillation frequency of free surface are measured in a radial cross-section for various applied temperature differences. It is found that the amplitude of the free surface height oscillations is large near the heater and the cold wall and relatively small in the middle part. The frequency of the free surface oscillations is same as the frequency of the temperature oscillations. Based on these data, the free surface motion during oscillations is delineated.

Lin, Jianlian↗
NASA NTRS1991

RIPPLE - A new model for incompressible flows with free surfaces

A new free surface flow model, RIPPLE, is summarized. RIPPLE obtains finite difference solutions for incompressible flow problems having strong surface tension forces at free surfaces of arbitrarily complex topology. The key innovation is the continuum surface force model which represents surface tension as a (strongly) localized volume force. Other features include a higher-order momentum advection model, a volume-of-fluid free surface treatment, and an efficient two-step projection solution method. RIPPLE's unique capabilities are illustrated with two example problems: low-gravity jet-induced tank flow, and the collision and coalescence of two cylindrical rods.

Kothe, D. B.↗
NASA NTRS2013

Modeling of Turbulent Free Shear Flows

The modeling of turbulent free shear flows is crucial to the simulation of many aerospace applications, yet often receives less attention than the modeling of wall boundary layers. Thus, while turbulence model development in general has proceeded very slowly in the past twenty years, progress for free shear flows has been even more so. This paper highlights some of the fundamental issues in modeling free shear flows for propulsion applications, presents a review of past modeling efforts, and identifies areas where further research is needed. Among the topics discussed are differences between planar and axisymmetric flows, development versus self-similar regions, the effect of compressibility and the evolution of compressibility corrections, the effect of temperature on jets, and the significance of turbulent Prandtl and Schmidt numbers for reacting shear flows. Large eddy simulation greatly reduces the amount of empiricism in the physical modeling, but is sensitive to a number of numerical issues. This paper includes an overview of the importance of numerical scheme, mesh resolution, boundary treatment, sub-grid modeling, and filtering in conducting a successful simulation.

Yoder, Dennis A.↗
NASA NTRS1986

The MSU free shear flow facility

A free shear layer wind tunnel has been constructed in order to undertake detailed, high quality transverse vorticity measurements in an isothermal, single stream mixing layer. The large 50 x 80 cm primary flow and 3-m test section length allows the generation of large, isolated vortical motions in high Reynolds number flow. A uniformly developed, irrotational secondary flow is achieved by means of an entrainment module.

Disimile, P. J.↗
NASA NTRS1991

Wave models for turbulent free shear flows

New predictive closure models for turbulent free shear flows are presented. They are based on an instability wave description of the dominant large scale structures in these flows using a quasi-linear theory. Three model were developed to study the structural dynamics of turbulent motions of different scales in free shear flows. The local characteristics of the large scale motions are described using linear theory. Their amplitude is determined from an energy integral analysis. The models were applied to the study of an incompressible free mixing layer. In all cases, predictions are made for the development of the mean flow field. In the last model, predictions of the time dependent motion of the large scale structure of the mixing region are made. The predictions show good agreement with experimental observations.

Liou, W. W.↗
NASA NTRS1973

Experiments in free shear flows: Status and needs for the future

Experiments in free turbulent flows are recommended with the primary concern placed on classical flows in order to augment understanding and for model building. Five classes of experiments dealing with classical free turbulent flows are outlined and proposed as being of particular significance for the near future. These classes include the following: (1) Experiments clarifying the effect of density variation owing to use of different gases, with and without the additional effect of density variation due to high Mach number or other effects; (2) experiments clarifying the role and importance of various parameters which determine the behavior of the near field as well as the condictions under which any of these parameters can be neglected; (3) experiments determining the cumulative effect of initial conditions in terms of distance to fully established flow; (4) experiments for cases where two layers of distinctly different initial turbulence structure flow side by side at the same mean speed; and (5) experiment using contemporary experimental techniques to study structure in free turbulent shear flows in order to compliment and support contemporary work on boundary layers.

Kline, S. J.↗
NASA NTRS1993

Spectral measurement of nonequilibrium arc-jet free-stream flow

Spectra of radiation emitted by the free-stream flow of air in an arcjet wind tunnel at NASA-Ames Research Center were studied experimentally. The arcjet produces a high energy gaseous flow that is expanded to low density and low temperature to produce high velocities in the free-stream for simulating atmospheric entry conditions. The gamma and the delta band systems of nitric oxide emitted by the free stream were measured in the second order. The NO-beta band system, which is in the same spectral region as the NO-gamma and NO-delta band systems, was not present in the data. Only transitions from the lowest vibrational level of the upper state of both the NO-gamma and NO-delta band systems were observed. The rotational temperature determined from these band systems was 660 +/- 50 deg K. The maximum possible vibrational temperature was determined to be less than 850 +/- 50 deg K. The electronic temperature determined from the ratio of the intensities of the NO-gamma and NO-delta band systems was 7560 +/- 340 K. The results indicate that the arcjet free-stream flow is in thermal nonequilibrium.

Gopaul, Nigel K. J. M.↗
NASA NTRS1984

Delta wings with shock-free cross flow

In order to have a high level of maneuverability, supersonic delta wings should have a cross flow that is free of embedded shock waves. The conical cross flow sonic surface differs from that of plane transonic flow in many aspects. Well-known properties such as the monotone law are not true for conical cross flow sonic surfaces. By using a local analysis of the cross flow sonic line, relevant conditions for smooth cross flow are obtained. A technique to artificially construct a smooth sonic surface and an efficient numerical method to calculate the flow field are used to obtain cones with smooth cross flow.

Sritharan, S. S.↗
NASA NTRS1985

Delta wings with shock-free cross flow

In order to have a high level of maneuverability, supersonic delta wings should have a cross flow that is free of embedded shock waves. The conical cross flow sonic surface differs from that of plane transonic flow in many aspects. Well-known properties such as the monotone law are not true for conical cross flow sonic surfaces. By using a local analysis of the cross flow sonic line, relevant conditions for smooth cross flow are obtained. A technique to artificially construct a smooth sonic surface and an efficient numerical method to calculate the flow field are used to obtain cones with smooth cross flow.

Sritharan, S. S.↗
NASA NTRS1985

Finite element simulation of temperature dependent free surface flows

The method of Engelman and Sani (1984) for a finite-element simulation of incompressible surface flows with a free and/or moving fluid interface, such as encountered in crystal growth and coating and polymer technology, is extended to temperature-dependent flows, including the effect of temperature-dependent surface tension. The basic algorithm of Saito and Scriven (1981) and Ruschak (1980) has been generalized and implemented in a robust and versatile finite-element code that can be employed with relative ease for the simulation of free-surface problems in complex geometries. As a result, the costly dependence on the Newton-Raphson algorithm has been eliminated by replacing it with a quasi-Newton iterative method, which nearly retains the superior convergence properties of the Newton-Raphson method.

Engelman, M. S.↗