Search NASA⌕ Search

SEARCH · Search NASA

Results for “FSM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Development of Displacement Gages Exposed to Solid Rocket Motor Internal Environments

The Space Shuttle Reusable Solid Rocket Motor (RSRM) has three non-vented segment-to-segment case field joints. These joints use an interference fit J-joint that is bonded at assembly with a Pressure Sensitive Adhesive (PSA) inboard of redundant O-ring seals. Full-scale motor and sub-scale test article experience has shown that the ability to preclude gas leakage past the J-joint is a function of PSA type, joint moisture from pre-assembly humidity exposure, and the magnitude of joint displacement during motor operation. To more accurately determine the axial displacements at the J-joints, two thermally durable displacement gages (one mechanical and one electrical) were designed and developed. The mechanical displacement gage concept was generated first as a non-electrical, self-contained gage to capture the maximum magnitude of the J-joint motion. When it became feasible, the electrical displacement gage concept was generated second as a real-time linear displacement gage. Both of these gages were refined in development testing that included hot internal solid rocket motor environments and simulated vibration environments. As a result of this gage development effort, joint motions have been measured in static fired RSRM J-joints where intentional venting was produced (Flight Support Motor #8, FSM-8) and nominal non-vented behavior occurred (FSM-9 and FSM-10). This data gives new insight into the nominal characteristics of the three case J-joint positions (forward, center and aft) and characteristics of some case J-joints that became vented during motor operation. The data supports previous structural model predictions. These gages will also be useful in evaluating J-joint motion differences in a five-segment Space Shuttle solid rocket motor.

Bolton, D. E.↗

Simulating the Effect of Space Vehicle Environments on Directional Solidification of a Binary Alloy

Space microgravity missions are designed to provide a microgravity environment for scientific experiments, but these missions cannot provide a perfect environment, due to vibrations caused by crew activity, on-board experiments, support systems (pumps, fans, etc.), periodic orbital maneuvers, and water dumps. Therefore, it is necessary to predict the impact of these vibrations on space experiments, prior to performing them. Simulations were conducted to study the effect of the vibrations on the directional solidification of a dendritic alloy. Finite element ca!cu!attie?ls were dme with a simd2titcr based on a continuum model of dendritic solidification, using the Fractional Step Method (FSM). The FSM splits the solution of the momentum equation into two steps: the viscous intermediate step, which does not enforce continuity; and the inviscid projection step, which calculates the pressure and enforces continuity. The FSM provides significant computational benefits for predicting flows in a directionally solidified alloy, compared to other methods presently employed, because of the efficiency gains in the uncoupled solution of velocity and pressure. finite differences, arises when the interdendritic liquid reaches the eutectic temperature and concentration. When a node reaches eutectic temperature, it is assumed that the solidification of the eutectic liquid continues at constant temperature until all the eutectic is solidified. With this approach, solidification is not achieved continuously across an element; rather, the element is not considered solidified until the eutectic isotherm overtakes the top nodes. For microgravity simulations, where the convection is driven by shrinkage, it introduces large variations in the fluid velocity. When the eutectic isotherm reaches a node, all the eutectic must be solidified in a short period, causing an abrupt increase in velocity. To overcome this difficulty, we employed a scheme to numerically predict a more accurate value for the rate of change of fraction of liquid as the liquid in an element solidifies. The new method enables us to contrast results of simulations in which the alloy is subjected to no gravity or a steady-state acceleration versus simulations when the alloy is subjected to vibration disturbances; therefore, the effect of vibration disturbances can be assessed more accurately. To assess the impact of these vibration-perturbations, transient accelerometer data from a space shuttle mission are used as inputs for the simulation model. These on-orbit acceleration data were obtained from the Microgravity Science Division at Glenn Research Center (GRC- MSD) and are applied to the buoyancy term of the momentum equation in a simulation of a Pb-5.8 wt. % Sb alloy that solidifies in a thermal gradient of 4000 K/m and a translation velocity of 3 p d s . Figure 2 shows the vertical velocity of a node that begins in the all-liquid region and subsequently solidifies; the vibrations are applied at 5000 seconds in this simulation. An important difficulty, common to all solidification models based on finite elements or 2 The magnitudes of the velocity oscillations that are vibration-induced are very small and acceptable. The biggest concern is whether the concentration of the liquid near the dendrite tips is distorted because of the vibration-induced perturbations. Results for this case show no concentration oscillations present in the all-liquid region.

Westra, D. G.↗

Rapid Ice Mass Loss: Does It Have an Influence on Earthquake Occurrence in Southern Alaska?

The glaciers of southern Alaska are extensive, and many of them have undergone gigatons of ice wastage on time scales on the order of the seismic cycle. Since the ice loss occurs directly above a shallow main thrust zone associated with subduction of the Pacific-Yakutat plate beneath continental Alaska, the region between the Malaspina and Bering Glaciers is an excellent test site for evaluating the importance of recent ice wastage on earthquake faulting potential. We demonstrate the influence of cumulative glacial mass loss following the 1899 Yakataga earthquake (M=8.1) by using a two dimensional finite element model with a simple representation of ice fluctuations to calculate the incremental stresses and change in the fault stability margin (FSM) along the main thrust zone (MTZ) and on the surface. Along the MTZ, our results indicate a decrease in FSM between 1899 and the 1979 St. Elias earthquake (M=7.4) of 0.2 - 1.2 MPa over an 80 km region between the coast and the 1979 aftershock zone; at the surface, the estimated FSM was larger but more localized to the lower reaches of glacial ablation zones. The ice-induced stresses were large enough, in theory, to promote the occurrence of shallow thrust earthquakes. To empirically test the influence of short-term ice fluctuations on fault stability, we compared the seismic rate from a reference background time period (1988-1992) against other time periods (1993-2006) with variable ice or tectonic change characteristics. We found that the frequency of small tectonic events in the Icy Bay region increased in 2002-2006 relative to the background seismic rate. We hypothesize that this was due to a significant increase in the rate of ice wastage in 2002-2006 instead of the M=7.9, 2002 Denali earthquake, located more than 100km away.

Sauber, Jeanne M.↗

Floating Silicon Method

The Floating Silicon Method (FSM) project at Applied Materials (formerly Varian Semiconductor Equipment Associates), has been funded, in part, by the DOE under a “Photovoltaic Supply Chain and Cross Cutting Technologies” grant (number DE-EE0000595) for the past four years. The original intent of the project was to develop the FSM process from concept to a commercially viable tool. This new manufacturing equipment would support the photovoltaic industry in following ways: eliminate kerf losses and the consumable costs associated with wafer sawing, allow optimal photovoltaic efficiency by producing high-quality silicon sheets, reduce the cost of assembling photovoltaic modules by creating large-area silicon cells which are free of micro-cracks, and would be a drop-in replacement in existing high efficiency cell production process thereby allowing rapid fan-out into the industry.

14 SOLAR ENERGY↗

A combined theoretical and experimental study of the phase coexistence and morphotropic boundaries in ferroelectric-antiferroelectric-antiferrodistortive multiferroics

The physical nature of the ferroelectric (FE), ferrielectric (FEI) and antiferroelectric (AFE) phases, their coexistence and spatial distributions underpins the functionality of antiferrodistortive (AFD) multiferroics in the vicinity of morphotropic phase transitions. In this work, using Landau-Ginzburg-Devonshire (LGD) phenomenology and a semi-microscopic four sublattice model (FSM), we explore the behavior of different AFE, FEI, and FE long-range orderings and their coexistence at the morphotropic phase boundaries in FE-AFE-AFD multiferroics. These theoretical predictions are compared with the experimental observations for dense Bi 1-y R y FeO 3 ceramics, where R is Sm or La atoms with the fraction 0 ≤ y ≤ 0.25, as confirmed by the X-ray diffraction (XRD) and Piezoresponse Force Microscopy (PFM). These complementary measurements were used to study the macroscopic and nanoscopic transformation of the crystal structure with doping. The comparison of the measured and calculated AFE/FE phase fractions demonstrate that the LGD-FSM approach well describes the experimental results obtained by XRD and PFM for Bi 1-y R y FeO 3 . Hence, this combined theoretical and experimental approach provides further insight into the origin of the morphotropic boundaries and coexisting FE and AFE states in model rare-earth doped multiferroics.

36 MATERIALS SCIENCE↗

Forward sensitivity analysis and mode dependent control for closure modeling of Galerkin systems

Model reduction by projection-based approaches is often associated with losing some of the important features that contribute towards the dynamics of the retained scales. As a result, a mismatch occurs between the predicted trajectories of the original system and the truncated one. We put forth a framework to apply a continuous time control signal in the latent space of the reduced order model (ROM) to account for the effect of truncation. We set the control input using parameterized models by following energy transfer principles. Our methodology relies on observing the system behavior in the physical space and using the projection operator to restrict the feedback signal into the latent space. Then, we leverage the forward sensitivity method (FSM) to derive relationships between the feedback and the desired mode-dependent control. We test the performance of the proposed approach using two test cases, corresponding to viscous Burgers and vortex merger problems at high Reynolds number. Results show that the ROM trajectory with the applied FSM control closely matches its target values in both the data-dense and data-sparse regimes.

97 MATHEMATICS AND COMPUTING↗

Computationally efficient CFD prediction of bubbly flow using physics-guided deep learning

To realize efficient computational fluid dynamics (CFD) prediction of two-phase flow, a multi-scale framework was proposed in this paper by applying a physics-guided data-driven approach. Instrumental to this framework, Feature Similarity Measurement (FSM) technique was developed for error estimation in two-phase flow simulation using coarse-mesh CFD, to achieve a comparable accuracy as fine-mesh simulations with fast-running feature. In this work, by defining physics-guided parameters and variable gradients as physical features, FSM has the capability to capture the underlying local patterns in the coarse-mesh CFD simulation. Massive low-fidelity data and respective high-fidelity data are used to explore the underlying information relevant to the main simulation errors and the effects of phenomenological scaling. By learning from previous simulation data, a surrogate model using deep feedforward neural network (DFNN) can be developed and trained to estimate the simulation error of coarse-mesh CFD. In a demonstration case of two-phase bubbly flow, the DFNN model well captured and corrected the unphysical “peaks” in the velocity and void fraction profiles near the wall in the coarse-mesh configuration, even for extrapolative predictions. The research documented supports the feasibility of the physics-guided deep learning methods for coarse mesh CFD simulations which has a potential for the efficient industrial design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Deep learning interfacial momentum closures in coarse-mesh CFD two-phase flow simulation using validation data

Multiphase flow phenomena have been widely observed in the industrial applications while it remains a challenging yet unsolved problems. Three-dimensional computational fluid dynamics (CFD) approaches resolve the flow fields on a finer special and temporal scales which can complement the dedicated experimental study. However, closures have to be introduced to reflect the underlying physics in multiphase flow. Among them, the interfacial forces, including drag, lift, turbulent dispersion and wall lubrication forces, play in important role on the bubble’s distribution and migration in liquid-vapor two-phase flow. Development of those closures traditionally rely on the experimental data and analytical derivation with simplified assumptions which usually cannot deliver a universal solution across wide range of flow conditions. In this paper, a data-driven approach, named as Feature Similarity Measurement (FSM), is developed and applied to improve the simulation capability of two-phase flow with coarse-mesh CFD approach. Interfacial momentum transfer in adiabatic bubbly flow serves as the focus of the present study. Both a mature and a simplified set of interfacial closures are taken as the low fidelity data. Experimental data and fine mesh CFD simulations results are adopted as high-fidelity data. Qualitative and quantitative analysis are performed in this paper which reveals that FSM can substantially improve the prediction of coarse mesh CFD model regardless of the choice of interfacial closures and it provides scalability and consistency across discontinuous flow regimes. Furthermore, it demonstrates that data-driven method can aid the multiphase flow modeling by exploring the connections between local physical features and simulation errors.

97 MATHEMATICS AND COMPUTING↗

Implicit fast sweeping method for hyperbolic systems of conservation laws

Implicit time-accurate methods are often used to integrate stiff problems where explicit schemes impose severe time step restrictions. This paper presents an efficient numerical framework based on the Fast Sweeping Method (FSM) for solving linear and nonlinear hyperbolic systems of conservation laws. The solution at each discrete location is computed by sweeping the numerical domain in several predetermined directions that follow the causality of the characteristic families. The use of a fractional step strategy eliminates the need for a solution selection criterion while one-sided stencils limit the number of sweeps to at most 2 d for d space dimensions. This work focuses on the first-order implicit upwind method since it constitutes the building block for high-order conservative schemes. For problems where the degree of stiffness evolves over time, implicit-explicit hybridization can be accomplished with the same algorithm by simply switching the stencil at each time level. As opposed to traditional implicit solvers, the sweeping method does not require a local time linearization of the fluxes thereby preserving the nonlinear stability properties of the original implicit scheme. It also avoids the large computational and memory requirements associated with solving large block-diagonal systems of equations. Here, a series of one- and two-dimensional test cases are presented for the inviscid Burgers' equation and the reactive Euler equations. The results indicate that the implicit FSM can allow a major reduction in the number of time steps even in the presence of discontinuous solution profiles.

74 ATOMIC AND MOLECULAR PHYSICS↗

A comparative study of LaBr{sub 3}(Ce{sup 3+}) and CeBr{sub 3} based gamma-ray spectrometers for planetary remote sensing applications

The recent availability of large volume cerium bromide crystals raises the possibility of substantially improving gamma-ray spectrometer limiting flux sensitivities over current systems based on the lanthanum tri-halides, e.g., lanthanum bromide and lanthanum chloride, especially for remote sensing, low-level counting applications or any type of measurement characterized by poor signal to noise ratios. The Russian Space Research Institute has developed and manufactured a highly sensitive gamma-ray spectrometer for remote sensing observations of the planet Mercury from the Mercury Polar Orbiter (MPO), which forms part of ESA’s BepiColombo mission. The Flight Model (FM) gamma-ray spectrometer is based on a 3-in. single crystal of LaBr{sub 3}(Ce{sup 3+}) produced in a separate crystal development programme specifically for this mission. During the spectrometers development, manufacturing, and qualification phases, large crystals of CeBr{sub 3} became available in a subsequent phase of the same crystal development programme. Consequently, the Flight Spare Model (FSM) gamma-ray spectrometer was retrofitted with a 3-in. CeBr{sub 3} crystal and qualified for space. Except for the crystals, the two systems are essentially identical. In this paper, we report on a comparative assessment of the two systems, in terms of their respective spectral properties, as well as their suitability for use in planetary mission with respect to radiation tolerance and their propensity for activation. We also contrast their performance with a Ge detector representative of that flown on MESSENGER and show that: (a) both LaBr{sub 3}(Ce{sup 3+}) and CeBr{sub 3} provide superior detection systems over HPGe in the context of minimally resourced spacecraft and (b) CeBr{sub 3} is a more attractive system than LaBr{sub 3}(Ce{sup 3+}) in terms of sensitivities at lower gamma fluxes. Based on the tests, the FM has now been replaced by the FSM on the BepiColombo spacecraft. Thus, CeBr{sub 3} now forms the central gamma-ray detection element on the MPO spacecraft.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Melting of spatially modulated phases at domain wall/surface junctions in antiferrodistortive multiferroics

A physical understanding of the nature of spatially modulated phases (SMPs) in rare-earth-doped antiferrodistortive (AFD) multiferroics and how they behave close to surfaces and interfaces is lacking. Here the emergence of the antiferroelectric (AFE), ferroelectric (FE), or ferrielectric (AFE-FE) spatial modulation in the vicinity of the morphotropic phase transition in La x Bi 1 – x Fe O 3 ( x ~ 0.2 ) is explored on the atomic level using high-resolution scanning transmission electron microscopy (HRSTEM). The suppression, or “melting,” of the AFE-type SMP in the vicinity of the AFD twin wall/surface junction is revealed by HRSTEM in La 0.22 Bi 0.78 Fe O 3 films and explained by the hybrid approach combining Landau-Ginzburg-Devonshire (LGD) phenomenology and the semimicroscopic four-sublattice model (FSM). The LGD-FSM approach reduces the problem of AFE (or AFE-FE) SMP emergence and stability to the thermodynamic analysis of the free-energy functional with AFE, FE, and AFD long-range order parameters and two master parameters: the FE-AFE coupling strength between four neighboring A sites and the nonstoichiometry factor, which are proportional to the variations of La concentration in La x Bi 1 – x Fe O 3 films. Finally, we establish that the surface-induced melting of SMPs and the associated broadening of AFE AFD domain walls minimize the film free energy under certain conditions imposed on the master parameters and gradient energy below the critical value. The observed behavior provides insight into the origin of SMPs in AFD multiferroics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Building a free-energy functional from atomically resolved imaging: Atomic-scale phenomena in La-doped BiFe O 3

Scanning transmission electron microscopy (STEM) has enabled mapping of atomic structures of solids with sub-picometer precision, providing insight to the physics of ferroic phenomena and chemical expansion. Yet, only a subset of information is available, due to projective nature of imaging in the beam direction. Correspondingly, the analysis often relies on the postulated form of macroscopic Landau-Ginzburg energy for the ferroic long-range order parameter, and some predefined relationship between experimentally determined atomic coordinates and the order-parameter field. Here, we propose an approach for exploring the structure of ferroics using reduced order-parameter models constructed based on experimental data only. We develop a four-sublattice model (FSM) for the analytical description of A -cation displacement in (anti)ferroelectric-antiferrodistortive perovskites of ABO 3 type. The model describes the displacements of cation A in four neighboring unit cells and determines the conditions of different structural phases’ appearance and stability in ABO 3 . We show that FSM explains the coexistence of rhombohedral, orthorhombic, and spatially modulated phases, observed by atomic-resolution STEM in La-doped BiFeO 3 . Using this method, we atomically resolve and theoretically model the sublattice asymmetry inherent to the case of the A -site La/Bi cation sublattice in La x Bi 1- x FeO 3 polymorphs. This approach allows the exploration of ferroic behaviors from experimental data only, without additional assumptions on the nature of the order parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disentangling contributions to small-system collectivity via scans of light nucleus-nucleus collisions

The observation of multiparticle azimuthal correlations in high-energy small-system collisions has led to intense debate on its origin and the possible coexistence from two competing theoretical scenarios: one based on initial-state intrinsic momentum anisotropy, and the other based on final-state interaction model (FSM) collective response to the collision geometry. To complement the previous scan of asymmetric collision systems ( p +Au, d +Au, and He+Au), we propose a scan of small symmetric collision systems at the Brookhaven National Laboratory Relativistic Heavy Ion Collider, such as C+C, O+O, Al+Al, and Ar+Ar$\sqrt{s_\text{NN}}$ = 0.2 TeV , to provide further insights in disentangling contributions from these two scenarios. These symmetric small systems have the advantage of providing a better controlled initial geometry dominated by the average shape of the overlap region as opposed to fluctuation-driven geometries in asymmetric systems. In this work, a transport model is employed to investigate the expected geometry response in the FSM scenario. Different trends of elliptic flow with increasing charge particle multiplicity are observed between symmetric and asymmetric systems, whereas triangular flow appears to show a similar behavior. Furthermore, a comparison of O+O collisions at $\sqrt{s_\text{NN}}$ = 0.2 TeV and at $\sqrt{s_\text{NN}}$ = 2.76 ₋ 7 TeV as proposed at the CERN Large Hadron Collider, provides a unique opportunity to disentangle the collision geometry effects at the nucleon level from those arising from subnucleon fluctuations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dynamic gating window for compensation of baseline shift in respiratory-gated radiation therapy

Purpose: To analyze and evaluate the necessity and use of dynamic gating techniques for compensation of baseline shift during respiratory-gated radiation therapy of lung tumors. Methods: Motion tracking data from 30 lung tumors over 592 treatment fractions were analyzed for baseline shift. The finite state model (FSM) was used to identify the end-of-exhale (EOE) breathing phase throughout each treatment fraction. Using duty cycle as an evaluation metric, several methods of end-of-exhale dynamic gating were compared: An a posteriori ideal gating window, a predictive trend-line-based gating window, and a predictive weighted point-based gating window. These methods were evaluated for each of several gating window types: Superior/inferior (SI) gating, anterior/posterior beam, lateral beam, and 3D gating. Results: In the absence of dynamic gating techniques, SI gating gave a 39.6% duty cycle. The ideal SI gating window yielded a 41.5% duty cycle. The weight-based method of dynamic SI gating yielded a duty cycle of 36.2%. The trend-line-based method yielded a duty cycle of 34.0%. Conclusions: Dynamic gating was not broadly beneficial due to a breakdown of the FSM's ability to identify the EOE phase. When the EOE phase was well defined, dynamic gating showed an improvement over static-window gating.

60 APPLIED LIFE SCIENCES↗

Probing interfacial momentum closures in two-phase bubbly flow with machine learning-aided methods

Computational fluid dynamics (CFD) approach has already reached a high level of maturity for single-phase flows, however the development of closure models for two-phase flow requires additional attention. Multiphase CFD (M-CFD) methods resolve the conservation equations for mass, momentum and energy while differing in the approaches and strategies adopted in the physical closure models. The most widely adopted framework for M-CFD is the Eulerian-Eulerian two-fluid approach which assumes that all phases are co-existing inside each computational cell. For each fluid, the full set of conservation equations is solved; therefore, each fluid has a different velocity field. For adiabatic two-phase flow, the mechanisms of the interfacial momentum transfer are modeled by the interfacial forces representing different physical mechanisms. One of the crucial issues in the development and application of two-fluid model is the understanding of the interfacial momentum closures which determines the bubble distribution and migration behaviors. Dedicated experiments are performed to support the physical understanding and drive the closures’ development. However, limitations exist due to the uncertainties in the experimental measurement and the simplified analytical assumptions which have difficulties on representing the complex non-linear flow fields. In this paper, a data-driven approach, Feature Similarity Measurement (FSM), is developed and proposed to resolve the challenges of modeling the interfacial forces closures. Case study is performed with two-phase flow scenarios where the high-fidelity experimental data is available. Within the Eulerian-Eulerian two-fluid framework, only momentum equations for gas and liquid phases are solved and reduced-order interfacial momentum closures are aided with FSM. Predictions of void fraction and velocity fields are analyzed and demonstrate the potential of machine learning-driven interfacial forces closures.

97 MATHEMATICS AND COMPUTING↗

Automating Testing of DUNE Electronics via a Finite State Machine

The Deep Underground Neutrino Experiment (DUNE) is a flagship international collaboration designed to study neutrinos tiny, nearly massless particles that may hold answers to fundamental questions about the Universe. Fermilab s Robotic Test Stand (RTS) plays a critical role in ensuring the quality of approximately 50,000 Application-Specific Integrated Circuit (ASIC) chips that will be used in DUNE s massive liquid argon detectors. These electronics will be inside the cryostat; therefore, they will need to have a high yield of working chips and low noise. To improve the automation and reliability of the RTS, this project focused on designing and implementing a Python-based finite state machine (FSM) to manage chip handling workflows. The FSM was developed as a modular software framework to coordinate robotic arm movements, manage chip tray positions, and monitor system states during testing. Key features include robust error handling routines, a pause/resume system for safe mid-cycle interruptions, and a simulation mode for iterative testing without hardware dependencies. The system was designed to prepare for seamless integration with RTS hardware components such as the robotic arm and vision system. This integration will streamline collaboration and enable efficient deployment of updates across the six total institutions performing testing. The outcomes of this internship contribute to Fermilab s mission to advance high-energy physics and support the DOE s national goals by directly improving the testing of equipment to be used in DUNE. The project also provided valuable experience in software design and contributing to the success of DUNE.

Kang, Caleb [William Rainey Harper Coll.]↗

Mass Transport in Membrane Systems: Flow Regime Identification by Fourier Analysis

The numerical calculation of local mass distributions in membrane systems by computational fluid dynamics (CFD) offers indispensable benefits. However, the concept to calculate such distributions in response to separate variations of operation conditions (OCs) makes it difficult to address overall, flow-physics-related questions, which require the consideration of the collective interaction of OCs. It is shown that such understanding-related relationships can be obtained by the analytical solution of the advection–diffusion equation considered. A Fourier series model (FSM) is presented, which provides exact solutions of an advection–diffusion equation for a wide range of OCs. On this basis, a new zeroth-order model is developed, which is very simple and as accurate as the complete FSM for all conditions of practical relevance. Advection-dominated blocked and diffusion-dominated unblocked flow regimes are identified (depending on a Péclet number which compares the flow geometry with a length scale imposed by the flow), which implies relevant requirements for the use of lab results for pilot- and full-scale applications. Analyses reveal the equivalence of variations of OCs, which offers a variety of options to accomplish desired flow regime changes.

Heinz, Stefan (ORCID:0000000248712416)↗

Development techniques for generic software

In developing the first version of a generic implementation of X.25, Levels 2 and 3, three development techniques are examined: table driven finite state machine implementation, an integrated testing environment, and top down design. A finite state machine (FSM) is a powerful tool for both specifying and implementing protocols. This technique was used in the X.25 specification. A table driven implementation of the FSM was chosen to facilitate changes and simplify coding. The effect that this technique have on program size, speed of execution, coding time, and debugging time are investigated.

Hamilton, R. L.↗