Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fe-doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

In-situ formation of stable interface towards Li-in anode for halide solid-state electrolyte

Halide-based solid-state electrolytes (SSEs) are promising candidates for next-generation all-solid-state lithium batteries (ASSLBs) due to their high ionic conductivity and chemical stability. However, their poor interfacial compatibility with lithium metal anode and Li-In alloy significantly hinder practical application due to the requirement for a protective interlayer. In this study, a novel approach to overcome this limitation is presented by introducing iron (Fe) doping into Li 3 InCl 6 (LIC), which enables direct and stable contact with lithium-indium (Li-In) metal without a protective interlayer. Thermodynamic and computational analyses identified Fe 3+ as a suitable dopant based on its similar reduction potential to In 3+ and structural compatibility within the halide lattice. The synthesized 10 at. % Fe-doped LIC exhibits high phase purity, retained ionic conductivity, and notably improved interfacial stability. Full-cell tests using Fe-LIC achieve over 300 cycles with 80 % capacity retention. At the same time, symmetric Li-In/ Fe-LIC/ Li-In cells sustain over 500 h of operation, representing the first reported long-term cycling of LIC-based ASSLB without a protective interlayer. In conclusion, this work establishes Fe doping as an effective strategy to stabilize halide SSEs of In system against Li-In alloy, thereby simplifying cell architecture and advancing the development of safer, high-performance halide-based solid-state electrolytes.

Halide-based solid-state electrolytes↗
DOE OSTI2026

Discovery of a new phase transition and high-valent redox mechanism in Fe-substituted Na 2 Mn 3 O 7

Sodium-ion batteries are a promising lower-cost alternative to lithium-ion batteries, but further improvements in electrochemical performance are required. One strategy to increase capacity is to enable reversible high-valent cationic and anionic redox in layered cathode materials; however, this is typically accompanied by structural degradation. Here, in this study, we elucidate the mechanism by which Fe-doped Na 2 Mn 3 O 7 , featuring ordered transition metal-vacancies, achieves reversible high-valent redox. Using Mössbauer spectroscopy, soft X-ray absorption spectroscopy (XAS), and in-situ hard XAS, we demonstrate reversible high-valent cationic redox involving both Fe and Mn while in-situ Raman confirms the absence of local structural degradation associated with oxygen redox. Combining in-situ X-ray diffraction with theoretical calculations, we further identify a previously unreported global phase transition from the $\bar{P1}$ to the $P2_1/c$ space group during electrochemical cycling and develop a physical model describing this structural evolution. These results provide insights for structurally stable layered sodium transition metal oxide cathodes with reversible high-valent redox.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Photosynthesis of a Photocatalyst: Single Atom Platinum Captured and Stabilized by an Iron(III) Engineered Defect

Single atom (SA), noble metal catalysts are of interest due to high projected catalytic activity while minimizing cost. Common issues facing many synthesis methodologies include complicated processes, low yields of SA product, and production of mixtures of SA and nanoparticles (NPs). Herein we report a simple, room-temperature synthesis of single Pt-atom decorated, anatase Fe-doped TiO 2 particles that leverages the Fe dopant as an engineered defect site to photodeposit and stabilize atomically dispersed Pt. Both particle morphology and Fe dopant location are based on thermodynamic principles (Gibbs-Wulff construction). CO-DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy) reveals absence of bridge-bonded CO signal, confirming atomically dispersed Pt. XAS (x-ray absorption spectroscopy) of both Pt and Fe indicates Fe-O-Pt bonding that persists through catalytic cycling. Mass balance indicates Pt loading on single particles is 2.5 wt% Pt; single Pt-atom decorated nanoparticle yield is 17%. Pt containing particles show more than an order-of-magnitude increased photo-oxidation efficiency relative to particles containing only Fe. High single-atom-Pt yield, ease of synthesis, and high catalytic activity demonstrate the utility and promise of this method. In conclusion, the principles of this photodeposition synthesis allow for its generalizability towards other SA metals of catalytic interest.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Effects of Iron and Manganese Doping on the Carbonation of Brucite [Mg(OH) 2 ]

Brucite [Mg(OH) 2 ] is a promising sorbent for carbon dioxide removal (CDR) due to its availability and low calcination temperatures. However, natural and synthetic brucites tend to contain metal impurities, such as iron or manganese, and how these impurities affect the interfacial chemical reactivity is uncertain. Here, in this study, the impact of low concentrations of iron and manganese impurities on the carbonation efficiency of Mg(OH) 2 was examined. Mg(OH) 2 with small amounts (1–5 mol %) of Fe and Mn was synthesized. The increasing substitution of Fe into Mg(OH) 2 was accompanied by the oxidation of Fe. The phase transformation sequence during the carbonation was found to be brucite [Mg(OH) 2 ] → amorphous magnesium carbonate (MgCO 3 ·nH 2 O) → nesquehonite (MgCO 3 ·3H 2 O), regardless of impurity concentration. Both the Fe- and Mn-doped Mg(OH) 2 samples were more reactive than endmember Mg(OH) 2 , possibly due to their higher surface areas and lower stabilities. During carbonation, 3 mol % Fe- and Mn-doped Mg(OH) 2 showed the highest reactivity. The variance in reactivity for Mn-doped Mg(OH) 2 was less than that of Fe-doped Mg(OH) 2 . These results suggest that natural or industrial waste Mg(OH) 2 with less than 5 mol % Fe and Mn impurities may be targeted as more effective CDR sorbents than endmember Mg(OH) 2 .

Carbon dioxide removal↗
DOE OSTI2023

Modular Iron–Bipyridine-Based Conjugated Aerogels as Catalysts for Oxygen Reduction Reaction

Aerogels have a large surface area and a porous structure, which make them an attractive catalyst support materials for fuel cells. Modifying the aerogels’ building blocks and introducing catalytic sites into their backbones allow them to function as both catalysts and supports, thereby increasing the density and distribution of catalyst active sites. In this work, we studied conjugated aerogels containing iron–bipyridine catalytic sites for the oxygen reduction reaction. To demonstrate the variation in physical and electrochemical properties of these aerogels, a series of aerogels were synthesized by a Glaser coupling reaction. Iron salt was added to the three-dimensional gel to produce iron–bipyridine complexes and obtain atomically dispersed catalytic sites. The electrocatalytic activity and electrical conductivity of the aerogels were increased after their heat treatment to yield Fe-doped carbon aerogels. The control of metal loadings was accomplished by changing the bipyridine content during the aerogel synthesis, resulting in 0.9–4.1 wt % Fe. In conclusion, the results show a correlation between Fe loading, aerogel structure, and catalytic activity, achieving high performance for the oxygen reduction reaction in both acidic and alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interplanar Ferromagnetism Enhanced Ultrawide Zero Thermal Expansion in Kagome Cubic Intermetallic (Zr,Nb)Fe 2

A cubic metal exhibiting zero thermal expansion (ZTE) over a wide temperature window demonstrates significant applications in a broad range of advanced technologies but is extremely rare in nature. Here, enabled by high-temperature synthesis, we realize tunable thermal expansion via magnetic doping in the class of kagome cubic (Fd-3m) intermetallic (Zr,Nb)Fe 2 . A remarkably isotropic ZTE is achieved with a negligible coefficient of thermal expansion (+0.47 x 10 -6 K -1 ) from 4 to 425 K, almost wider than most ZTE in metals available. A combined in situ magnetization, neutron powder diffraction, and hyperfine Mössbauer spectrum analysis reveals that interplanar ferromagnetic ordering contributes to a large magnetic compensation for normal lattice contraction upon cooling. Trace Fe-doping introduces extra magnetic exchange interactions that distinctly enhance the ferromagnetism and magnetic ordering temperature, thus engendering such an ultrawide ZTE. Finally, this work presents a promising ZTE in kagome metallic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Simultaneous Development of Antiferromagnetism and Local Symmetry Breaking in a Kagome Magnet (Co 0.45 Fe 0.55 )Sn

CoSn and FeSn, two kagome-lattice metals, have recently attracted significant attention as hosts of electronic flat bands and emergent physical properties. However, current understandings of their physical properties are limited to knowledge of the average crystal structure. Here, we report the Fe-doping induced coemergence of the antiferromagentic (AFM) order and local symmetry breaking in (Co 0.45 Fe 0.55 )Sn. Rietveld analysis on the neutron and synchrotron X-ray diffraction data indicates A-type antiferromagnetic order with the moment pointing perpendicular to the kagome layers, associated with the anomaly in the MSn(1) 2 Sn(2) 4 (M = Co/Fe) octahedral distortion and the lattice constant c. Reverse Monte Carlo (RMC) modeling of the synchrotron X-ray total scattering results captured the subtle local orthorhombic distortion involving off-axis displacements of Sn(2). Our results indicate that the stable hexagonal lattice above T N becomes unstable once the A-type AFM order is formed below T N . Here we argue that the local symmetry breaking has a magnetic origin, since the spatially varied M–Sn(2) bond lengths arise from out-of-plane magnetic exchange coupling J c via the exchange pathway M–Sn(2)–M. Our study provides comprehensive information on the crystal structure in both long-range scale and local scale, unveiling unique coupling between AFM order, octahedral distortion, and hidden local symmetry breaking.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Visualizing discrete Fermi surfaces and possible nodal-line to Weyl state evolution in ZrSiTe

Topological nodal line semimetals (TNLSMs) represent a quantum state of topological matter. When the crystal/time-reversal symmetry is broken, a nodal line state is expected to evolve into a Dirac semimetal, a Weyl semimetal, or other topological phases according to theoretical studies. Here, we report scanning tunneling microscopy (STM) based quasiparticle interference (QPI) measurements performed on the surface of TNLSM ZrSiTe single crystal. A discrete Fermi surface with multiple electron/hole pockets and the impurity-induced inter-/intra- pockets scatterings are directly visualized from QPI patterns. Moreover, the degenerated Dirac points at X point evolve into the pairs of Weyl nodes when Fe atoms are deposited, suggesting a possible phase transition from the nodal line to the Weyl state. The calculated band structures and the Weyl points by applying Zeeman splitting energies along x-direction, further confirm the existence of Weyl points in the Fe-doped ZrSiTe induced by the broken of time-reversal symmetry.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic cations doped into a double perovskite semiconductor

Here we report two solid solutions based on the magnetic ion doping of the double perovskite oxide Sr 2 GaSbO 6 : Sr 2 Ga 1-x Cr x SbO 6 (0.1 ≤ x ≤ 0.4) and Sr 2 Ga 1-x Fe x SbO 6 (0.1 ≤ x ≤ 0.4). All compositions crystallize in the same space group ($I4/m$) as their undoped parent phase Sr 2 GaSbO 6 , with the trivalent magnetic cations Cr 3+ or Fe 3+ partially substituting for non-magnetic Ga 3+ in one of the B-cation sites. The Cr- and Fe-doped phases display dominant antiferromagnetic coupling among the dopant magnetic moments, and exhibit decreasing band gaps with increasing substitution level.

antiferromagnetic coupling↗
DOE OSTI2024

Interplay between element-specific distortions and electrocatalytic oxygen evolution for cobalt–iron hydroxides

A microscopic understanding of how Fe-doping of Co(OH) 2 improves electrocatalytic oxygen evolution remains elusive. We study two Co 1–x Fex(OH) 2 series that differ in fabrication protocol and find composition alone poorly correlates to catalyst performance. Structural descriptors extracted using X-ray diffraction, X-ray absorption spectroscopy, and Raman spectroscopy reveal element-specific distortions in Co 1–x Fe x (OH) 2 . These structural descriptors are composition-dependent within individual sample series but inconsistent across fabrication protocols, revealing fabrication-dependence in catalyst microstructure. Correlations between structural parameters from different techniques show that Fe–O resists bond length changes, forcing distortion of Co environments. We find the difference in O–M–O bond angles between Co and Fe sites to correlate with electrocatalytic behavior across both sample series, which we attribute to asymmetric distortion of potential energy surfaces for the Co(III) to Co(IV) oxidation. A Tafel slope consistent with a rate-limiting step without electron transfer emerges as the O–Co–O angle decreases, implying a distortion-induced transition in the rate-limiting step. The fabrication dependence of electronic and bonding structure in the catalysts should be considered in theoretical and high-throughput analyses of electrocatalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Simultaneously improved reversibility and hydrogen production of solid oxide cells through infiltrating air electrode

Among the various fuel cells, solid oxide cells (SOCs) are the unique type that can principally operate reversibly as either fuel cells to produce electricity or as an electrolyser to split water and produce green hydrogen (H 2 ). Nevertheless, the SOCs' reversibility presents enormous challenges that are manifested by the fast degradation through the cycling between fuel cell and electrolysis mode. While the La 0.8 Sr 0.2 MnO 3 /yttria-stabilized zirconia (LSM/YSZ) air electrode possesses significant advantages in terms of high electrical conductivity and high thermal stability under fuel cell mode, the SOCs with the LSM/YSZ air electrode experience rapid performance degradation with catastrophic electrode delamination shortly after switching from fuel cell to electrolysis mode. To prevent such catastrophic delamination and enable the electrolysis H 2 production, a chemical solution with the designed chemistry of SrFe 2 O 4-d was infiltrated into the LSM/YSZ air electrode. The infiltration immediately mitigates the catastrophic delamination, and the infiltrated cells exhibit significantly improved reversibility upon the electrochemical operation. Nanostructure examination reveals nanoscale cracks and second-phase nanograins formed in the air electrode from the baseline cell. By contrast, no delamination was observed at either the micron or the nanoscale for the infiltrated cell, which is attributed to the increased ion conductivity of the Fe-doped LSM mixed conductor induced by the significant interdiffusion between the LSM backbone and infiltrates. Here, this study presents a viable method for preventing electrode delamination while enhancing the durability of H 2 production and power generation for reversible fuel cell/electrolysis cell operation. It further opens new research directions of modifying the electrochemical activity of the electrode of inherently functional cells through the infiltration of the solutions with different chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Enhancing the electron mobility in Si-doped (010) β-Ga 2 O 3 films with low-temperature buffer layers

We demonstrate a new substrate cleaning and buffer growth scheme in β-Ga 2 O 3 epitaxial thin films using metal–organic vapor phase epitaxy (MOVPE). For the channel structure, a low-temperature (LT, 600 °C) un-doped Ga 2 O 3 buffer was grown, followed by a transition layer to a high-temperature (HT, 810 °C) Si-doped Ga 2 O 3 channel layers without growth interruption. The (010) Ga 2 O 3 Fe-doped substrate cleaning uses solvent cleaning, followed by additional hydrofluoric acid (49% in water) treatment for 30 min before the epilayer growth. This step is shown to compensate the parasitic Si channel at the epilayer–substrate interface that originates from the substrate polishing process or contamination from the ambient. From secondary ion mass spectroscopy (SIMS) analysis, the Si peak atomic density at the substrate interface is found to be several times lower than the Fe atomic density in the substrate—indicating full compensation. The elimination of the parasitic electron channel at the epi–substrate interface was also verified by electrical (capacitance–voltage profiling) measurements. In the LT-grown (600 °C) buffer layers, it is seen that the Fe forward decay tail from the substrate is very sharp, with a decay rate of ∼9 nm/dec. X-ray off-axis rocking curve ω-scans show very narrow full width at half maximum (FWHM) values, similar to the as-received substrates. These channels show record high electron mobility in the range of 196–85 cm 2 /V⋅s in unintentionally doped and Si-doped films in the doping range of 2 × 10 16 –1 × 10 20 cm −3 . Si delta-doped channels were also grown utilizing this substrate cleaning and the hybrid LT buffers. Record high electron Hall mobility of 110 cm 2 /V⋅s was measured for sheet charge density of 9.2 × 10 12 cm −2 . This substrate cleaning, combined with the LT buffer scheme, shows the potential of designing Si-doped β-Ga 2 O 3 channels with exceptional transport properties for high-performance Ga 2 O 3 -based electron devices.

Bhattacharyya, Arkka↗
DOE OSTI2024

Silicon implantation and annealing in β -Ga 2 O 3 : Role of ambient, temperature, and time

Optimizing thermal anneals of Si-implanted β-Ga 2 O 3 is critical for low resistance contacts and selective area doping. Here we report the impact of annealing ambient, temperature, and time on the activation of room temperature ion-implanted Si in β-Ga 2 O 3 at concentrations from 5 × 10 18 to 1 × 10 20 cm −3 , demonstrating full activation (>80% activation, mobilities >70 cm 2 /V s) with contact resistances below 0.29 Ω mm. Homoepitaxial β-Ga 2 O 3 films, grown by plasma-assisted molecular beam epitaxy on Fe-doped (010) substrates, were implanted at multiple energies to yield 100 nm box profiles of 5 × 10 18 , 5 × 10 19, and 1 × 10 20 cm −3 . Anneals were performed in an ultra-high vacuum-compatible quartz furnace at 1 bar with well-controlled gas compositions. To maintain β-Ga 2 O 3 stability, p O2 must be greater than 10 −9 bar. Anneals up to p O2 = 1 bar achieve full activation at 5 × 10 18 cm −3, while 5 × 10 19 cm −3 must be annealed with p O2 ≤ 10 −4 bar, and 1 × 10 20 cm −3 requires p O2 < 10 −6 bar. Water vapor prevents activation and must be maintained below 10 −8 bar. Activation is achieved for anneal temperatures as low as 850 °C with mobility increasing with anneal temperatures up to 1050 °C, though Si diffusion has been reported above 950 °C. At 950 °C, activation is maximized between 5 and 20 min with longer times resulting in decreased carrier activation (over-annealing). This over-annealing is significant for concentrations above 5 × 10 19 cm −3 and occurs rapidly at 1 × 10 20 cm −3 . Rutherford backscattering spectrometry (channeling) suggests that damage recovery is seeded from remnant aligned β-Ga 2 O 3 that remains after implantation; this conclusion is also supported by scanning transmission electron microscopy showing retention of the β-phase with inclusions that resemble the γ-phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Magnetic semiconductors from functionalized Cr 2 ⁢C MXenes

Here, we report an ab initio investigation of functionalized and 3⁢𝑑-electron-doped Cr 2 ⁢C MXenes. Upon functionalization, the Cr 2⁢ C becomes chemically, dynamically, and mechanically stable, and it exhibits magnetic semiconducting behavior. Cr 2 ⁢CF 2 stands out as a wide band gap semiconductor, possessing superexchange interaction mediated by F atoms within the layer; however, the applied strain transforms it from an indirect to a direct band gap semiconductor. Strong spin-phonon coupling found in Cr 2 ⁢CH 2 is supported by the distorted Cr spin density due to the hydrogen environment. Two magnon branches, associated with two sublattice spins, are found in the ferromagnetic Cr 2 ⁢CO 2 and antiferromagnetic Cr 2 ⁢CF 2 . Depending on the types of 3⁢𝑑-electron dopants and functionalization, Cr 2 ⁢C MXenes (except for Cr 2 ⁢CO 2 ) change from an indirect band gap magnetic semiconductor to different states of electronic and magnetic matter, including an exotic direct band gap magnetic bipolar semiconductor. In addition, we reveal a band inversion between the two highest valence bands in the Fe-doped Cr 2 ⁢CCl 2 .

2D materials↗
DOE OSTI2021

Tuning the flat bands of the kagome metal CoSn with Fe, In, or Ni doping

We report CoSn is a Pauli paramagnet with relatively flat d bands centered about 100 meV below the Fermi energy, E F . Single crystals of CoSn lightly doped with Fe, In, or Ni are investigated using x-ray and neutron scattering, magnetic susceptibility and magnetization, AC susceptibility, specific heat, and resistivity measurements. Within the rigid-band approximation, hole doping with a few percent of Fe or In should move the flat bands closer to E F , whereas electron doping with Ni should move the flat bands further away from E F . We provide evidence that this indeed occurs. Fe and In doping drive CoSn toward magnetism, while Ni doping suppresses CoSn's already weak magnetic response. The resulting ground state is different for Fe versus In doping. For Fe-doped crystals, Co 1-x Fe x Sn, with 0.02< x <0.27, the magnetic and specific-heat data are consistent with the formation of a spin glass, with a glass temperature, T g , ranging from 1 K for x = 0.02 to 10 K for x = 0.27. Powder and single-crystal neutron diffraction found no evidence of long-range magnetic order below T g for samples with x ≈ 0.17. For In-doped crystals, CoSn 1-y In y , both the magnetic susceptibility and the Sommerfeld coefficient, γ, increase substantially relative to pure CoSn, but with no clear indication of a magnetic transition for 0.05< y <0.2. CoSn crystals doped with Ni (Co 0.93 Ni 0.07 Sn) have a significantly smaller magnetic susceptibility and γ than pure CoSn, consistent with flat bands further from E F .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Interfacial magnetic characteristics of nearly compensated gadolinium iron garnet

Reports on spin Hall magnetoresistance, magnonic spin currents from thermal gradients, and spin transfertorque magnetic random-access memory using compensated ferrimagnets largely discuss bulk magnetization but lack consideration of depth profiles or interfacial characteristics. Here, magnetic and structural characterization of profiles and interfaces was performed for nearly compensated gadolinium iron garnet (GdIG) thin films. X-ray diffraction and reciprocal space maps show that sputter deposited GdIG on Si is polycrystalline with the desired cubic garnet phase, and GdIG on gadolinium gallium garnet (GGG) is epitaxial with <0.06% compressive strain. Temperature-dependent magnetometry confirms the compensation temperatures of GGG/GdIG and Si/GdIG to be 285 and 260 K, respectively, both near room temperature. Interestingly, these measurements suggest the presence of unsaturated rare-earth moments, which result in a characteristic hysteresis between heating and cooling sequences in the magnetization-temperature curves at zero field. Depth-profile measurements from polarized neutron reflectometry (PNR) indicate up to 91% volume fraction in GdIG on Si. At the interface, PNR reveals a region containing magnetized Fe-doped GGG, a low-density GdIG at the GGG/GdIG interface, and a thin magnetically dead layer at the Si/GdIG interface. Cross-sectional transmission electron microscopy and energy dispersive x-ray spectroscopy confirm the assessment of PNR. In conclusion, the magnetic characteristics of interfacial regions are attributed to intermixing of Fe-Ga at the GGG/GdIG interface and the presence of amorphous Fe-Si at the Si/GdIG interface.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Co-Free Cathode Materials and Their Novel Architectures

To enable cobalt-free LiNi 0.5 Mn 1.5 O 4 (LNMO) electrode and novel electrolyte formulation for use in next-generation Li-ion batteries (LIB) capable of high energy density, long cycle life and low cost, several methods were developed throughout this project. To enhance the performance of LNMO, Fe-doping on LNMO, laser treatment and atomic layer deposition (ALD) were adopted. Moreover, dry electrode method has successfully helped to fabricate ultra-high loading LNMO with stable performance. The improvement at anode side includes ALD-coating as well as pre-lithiation of graphite anode. In the novel electrolyte development, it was found that all-fluorinated electrolyte with appropriate additives can effectively extend both cycle and calendar life of LNMO full cells at practical loadings. Additional diagnosis of LNMO full cells showed that different types of carbon and porosity of separator play a critical role in the success of LNMO’s high voltage operation. The combined effort throughout the project pushed forward the understanding and commercialization of LNMO at practical level.

25 ENERGY STORAGE↗