Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flybys”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Encke ballistic flybys in 1980

In a search for missions with reasonable flyby speed, reasonable arrival conditions, as well as reasonable cost, two types of ballistic trajectories to Encke are studied. The 100-day flight time region is examined, and two trajectories are selected as baseline mission possibilities. To find slower flybys, the 600-day region was investigated as a three-impulse transfer using a simple optimization procedure in order to display the tradeoff between deep space delta-V and flyby speed. Significant lowering of flyby speed is attainable, but the cost in delta-V is so high that this mode does not provide an attractive alternative at present.

Bender, D. F.↗

A new method for optimizing multiple flyby trajectories

A new procedure has been developed which minimizes total impulsive Delta V for multiple flyby trajectories with constraints on flyby parameters and maneuver times. The method involves solving a bounds-constrained parameter optimization problem with a Newton algorithm utilizing analytic first and second derivatives. Each trajectory segment connecting consecutive maneuver points is found by first targeting from the preceding maneuver point to the parameters of the upcoming flyby and then propagating the resulting trajectory to the next maneuver point. Multi-conic techniques are used for trajectory propagation and for computation of the state transition matrix. This procedure has successfully optimized Galileo satellite tours containing up to 11 flybys.

Damario, L. A.↗

Determination of the Venus flyby orbits of the Soviet Vega probes using VLBI techniques

In December 1984, the Soviet Union launched two identical Vega spacecraft with the dual objective of exploring Venus and continuing to rendezvous with the comet Halley. The two Vega spacecraft encountered Venus in mid-June 1985 and successfully deployed entry probes and wind-measuring balloons into the Venus atmosphere. An objective of the Venus Balloon experiment was to measure the Venus winds using differential VLBI from the balloon and the flyby bus. NASA's Deep Space 64 meter subnet was part of a world wide network organized to collect data from the Vega probes and balloons. A critical element of this experiment was an accurate determination of the Venus relative flyby orbits of the Vega spacecraft during the 46 hour balloon lifetime. Venus flyby solutions were independently determined by the Soviets using two-way range and Doppler from Soviet stations and by JPL using one-way Doppler and VLBI data collected from the DSN. The Vega flyby solutions determined by the Soviets using a sparse two-way tracking strategy with JPL solutions using the DSN VLBI data to complement the Soviet data and with solutions using only one-way data collected by the DSN were compared.

Ellis, J.↗

The comet rendezvous asteroid flyby mission to Comet Kopff - Getting there is half the fun

The goal of the Comet Rendezvous Asteroid Flyby mission (CRAF) is to fly 'outward to the beginning', to examine closely what are thought to be remnants of the origins of the solar system. In particular, the CRAF spacecraft will use a two-year delta-V-earth-gravity-assist (delta-V-EGA) trajectory to reach a rendezvous point near the aphelion of the Comet Kopff, flying by the asteroid 449 Hamburga on the way. This paper discusses the trajectory used to get to the comet. Topics covered include the launch period, possible additional asteroid flybys, the earth flyby, the Hamburga flyby, and the rendezvous with Comet Kopff.

Sweetser, Theodore H.↗

Trajectory design for a lunar mapping and near-Earth-asteroid flyby mission

In August, 1994, the unusual asteroid (1620) Geographos will pass very close to the Earth. This provides one of the best opportunities for a low-cost asteroid flyby mission that can be achieved with the help of a gravity assist from the Moon during the years 1994 and 1995. A Geographos flyby mission, including a lunar orbiting phase, was recommended to the Startegic Defense Initiative (SDI) Office when they were searching for ideas for a deep-space mission to test small imaging systems and other lightweight technologies. The goals for this mission, called Clementine, were defined to consist of a comprehensive lunar mapping phase before leaving the Earth-Moon system to encounter Geographos. This paper describes how the authors calculated a trajectory that met the mission goals within a reasonable total Delta-V budget. The paper also describes some refinements of the initially computed trajectory and alternative trajectories were investigated. The paper concludes with a list of trajectories to fly by other near-Earth asteroids during the two years following the Geographos opportunity. Some of these could be used if the Geographos schedule can not be met. If the 140 deg phase angle of the Geographos encounter turns out to be too risky, a flyby of (2120) Tantalus in January, 1995, has a much more favorable approach illumination. Tantalus apparently can be reached from the same lunar orbit needed to get to Geographos. However, both the flyby speed and distance from the Earth are much larger for Tantalus than for Geographos.

Dunham, David W.↗

Addition of a Low Altitude Tethys Flyby to the Nominal Cassini Tour

Of the eight Saturnian icy satellites, all but Mimas and Tethys have low altitude targeted flybys during the 4-year nominal Cassini spacecraft tour. In November 2004, the existence of a potential low-altitude Tethys flyby was discovered; this low-altitude Tethys flyby, added to the nominal tour in March 2005, corresponds to a 1500 km nontargeted periapsis altitude on September 24, 2005 and requires a Av cost of 8 mls. This paper details the methods used to determine the Tethys non-targeted flyby altitude, driven by navigational requirements and operational constraints, in addition to several trajectory modifications implemented to reduce total Av costs, and in some cases, simultaneous increases in scientific return.

Cassini↗

Multi-Objective Hybrid Optimal Control for Multiple-Flyby Interplanetary Mission Design using Chemical Propulsion

Preliminary design of high‐thrust interplanetary missions is a highly complex process. The mission designer must choose discrete parameters such as the number of flybys and the bodies at which those flybys are performed. For some missions, such as surveys of small bodies, the mission designer also contributes to target selection. In addition, real‐valued decision variables, such as launch epoch, flight times, maneuver and flyby epochs, and flyby altitudes must be chosen. There are often many thousands of possible trajectories to be evaluated. The customer who commissions a trajectory design is not usually interested in a point solution, but rather the exploration of the trade space of trajectories between several different objective functions. This can be a very expensive process in terms of the number of human analyst hours required. An automated approach is therefore very desirable. This work presents such an approach by posing the impulsive mission design problem as a multi‐objective hybrid optimal control problem. The method is demonstrated on several real‐world problems. Two assumptions are frequently made to simplify the modeling of an interplanetary high‐thrust trajectory during the preliminary design phase. The first assumption is that because the available thrust is high, any maneuvers performed by the spacecraft can be modeled as discrete changes in velocity. This assumption removes the need to integrate the equations of motion governing the motion of a spacecraft under thrust and allows the change in velocity to be modeled as an impulse and the expenditure of propellant to be modeled using the time‐independent solution to Tsiolkovsky's rocket equation [1]. The second assumption is that the spacecraft moves primarily under the influence of the central body, i.e. the sun, and all other perturbing forces may be neglected in preliminary design. The path of the spacecraft may then be modeled as a series of conic sections. When a spacecraft performs a close approach to a planet, the central body switches from the sun to that planet and the trajectory is modeled as a hyperbola with respect to the planet. This is known as the method of patched conics. The impulsive and patched‐conic assumptions significantly simplify the preliminary design problem.

Optimization↗

Multi-Objective Hybrid Optimal Control for Multiple-Flyby Interplanetary Mission Design Using Chemical Propulsion

Preliminary design of high-thrust interplanetary missions is a highly complex process. The mission designer must choose discrete parameters such as the number of flybys and the bodies at which those flybys are performed. For some missions, such as surveys of small bodies, the mission designer also contributes to target selection. In addition, real-valued decision variables, such as launch epoch, flight times, maneuver and flyby epochs, and flyby altitudes must be chosen. There are often many thousands of possible trajectories to be evaluated. The customer who commissions a trajectory design is not usually interested in a point solution, but rather the exploration of the trade space of trajectories between several different objective functions. This can be a very expensive process in terms of the number of human analyst hours required. An automated approach is therefore very desirable. This work presents such an approach by posing the impulsive mission design problem as a multiobjective hybrid optimal control problem. The method is demonstrated on several real-world problems.

Trajectory↗

Autonomous target tracking of small bodies during flybys

Spacecraft flybys of small solar system bodies provide important science return in the form of images of the target body taken around closest approach. In order to maximize the number of images taken of the target, an autonomous closed-loop tracking system has been developed to maintain lock on the target during the flyby. The system uses images to estimate the spacecrafts target-relative position and attitude, which is then used to point the camera. The system has been successfully used twice: the Deep Space 1 flyby of comet Borrelly and the Stardust flyby of asteroid Annefrank. This paper describes in detail the tracking algorithms and flight results.

Synnott, Stephen P.↗

The Epic Chronicle of Designing Cassini's Titan Flyby Altitudes

The selection and optimization of Titan flyby altitudes for NASA's Cassini mission at Saturn has traveled a long, fascinating, and often torturous sixteen-year path - starting in 2001, when pre-arrival trajectory design decisions had to be made, through April of 2017 when Cassini's last, and arguably most critical, low flyby takes place. The chronicle of designing and updating the Titan flyby altitudes have twists and turns enough to satisfy a full-length novel or feature film, including: critical design decision-making before arrival with multiple atmospheric models, high uncertainties, and limited data; early flybys that seemed to show trends that weren't there; use and misuse of statistical analysis; unexpected surprises with limited reaction time; navigation of a scientific, engineering, and management community with a wide array of inherent biases; and consideration of a variety of project risk postures in a high-scrutiny, high-impact, high-reward environment.

Bittner, Molly↗

Operational thermal control of Cassini Titan flybys

The Cassini spacecraft will fly by Saturn's largest moon, Titan, forty-five times during its science tour. Twenty-five of the flybys will have a relatively low closest approach target altitude in Titan's atmosphere and are of thermal concern. The Thermal Devices Team on the Cassini Project in Mission Operations at the Jet Propulsion Laboratory has designed an operational thermal control strategy for these flybys. The challenge was to provide flyby operational thermal control that enabled science and remained within design limitations and Project constraints.

Cassini aeroheating Titan flyby thermal analysis↗

Thermal Analysis of NRHO Entry Lunar Flyby Maneuver

NASA’s Gateway will serve as a platform for sustained human lunar exploration and an opportunity to gain experience with long duration deep-space architectures. The first two Gateway modules, the Power and Propulsion Element (PPE) and the Habitation and Logistics Outpost (HALO) are scheduled to launch together as a Co-Manifested Vehicle (CMV) in 2024. To reach the destination Near-Rectilinear Halo Orbit (NRHO), the CMV will perform a low-thrust electric propulsion spiral and a final transfer maneuver that will include a low altitude flyby of the lunar surface. This flyby thermal environment is more adverse than that expected during the NRHO itself and risks temperature exceedances on various spacecraft components. The highly transient nature of the flyby also required a different approach than the typical worst-case dissipation margins used to size the spacecraft thermal control systems. This paper presents analyses on the relative severity of different minimum perilune altitudes and results of an integrated CMV thermal model built in Thermal Desktop.

lunar flyby maneuver↗

New insights of asteroid 4179 Toutatis using China Chang'e-2 close flyby optical measurements

The mysteries of near-Earth asteroid 4179 Toutatis have been more comprehensively unveiled by analyzing the optical images taken during the Chang'e-2 flyby in 2012. Compared with previous works, this paper concentrates on the photogrammetric relation between the Chang'e-2 spacecraft and Toutatis and the imaging shadow effect during the flyby. Accurate models of imaging and optical measurements are developed to study Toutatis's dimensions and rotational state at the time of imaging. As the illumination study shows, the shadowed region perpendicular to the long axis accounts for 27.78% of the Toutatis images, while the long axis of the body is fully captured. With a compensation on the shadow effect, the optical measurements reveal that Toutatis's long axis is 4354 ± 56 m, the maximum length is 4391 ± 56 m, and the spatial orientation described with the angles of direction cosine during the flyby is (126.°13 ± 0.°29, 122.°98 ± 0.°21, 126.°63 ± 0.°46). Furthermore, a new triaxial ellipsoid of 4354 × 1835 × 2216 m and a volume of 7.5158 km{sup 3} are proposed based on the previous Toutatis shape model. The effectiveness of the proposed method is validated, since typical features such as the neck and endpoints agree well with the results simultaneously observed by the ground radar. Moreover, it also potentially provides a feasible approach to precisely calculate the spin period of Toutatis.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiple asteroid flyby opportunities in the 1970's and 1980's.

Trajectory characteristics are described for several representative multiple asteroid flyby (MAF) missions possible in the 1970's and early 1980's, many of which are constrained to include a flyby of Ceres, the largest asteroid. It is shown that flybys of three or four asteroids are possible with spacecraft having a delta-V capability of less than 1 km per sec. The major technical problems associated with MAF missions are due to the small size and poorly known orbits of aster oids. These factors make acquisition, guidance, and science measurements difficult, especially for the very small asteroids. Yet, MAF missions are expected to provide a significant increase in knowledge of basic properties of asteroids and to lay the groundwork for more sophisticated rendezvous and sample return missions.

Brooks, D. R.↗

Alternate multiple-outer-planet missions using a Saturn-Jupiter flyby sequence

A study has been made of a method for providing more frequent launch opportunities for multiple-planet Grand Tour type missions to the outer solar system. A Saturn-Jupiter flyby sequence was used in the analysis to initiate the mission instead of the normal Jupiter-Saturn sequence. The Saturn-first approach is shown to yield several new launch opportunities following the 1980 cutoff date for Jupiter-first missions. Results are given for various two-planet, three-planet, and four-planet Jupiter-first and Saturn-first missions. A unique five-planet Saturn-first mission and a Saturn-Jupiter flyby which returns to earth are also discussed. Mission performance is evaluated for each flyby technique by comparing Saturn-first and Jupiter-first missions with respect to launch energy requirements, available launch windows, planetary encounter conditions, and total mission times.

Young, J. W.↗

Optimization of multiple flyby trajectories

A procedure has been developed which minimizes total delta-V (instantaneous velocity change) for a multiple flyby trajectory with constraints on flyby altitude and orientation. The solution is found by varying the locations of maneuver points between each flyby to minimize the delta-Vs at the maneuver points. Each trajectory segment connecting consecutive maneuver points is found by solving an N-body analog to Lambert's problem. Multiconic techniques are used for trajectory propagation and for computation of the state transition matrix. The constrained parameter optimization problem is converted to an unconstrained problem by means of penalty functions and then solved with a quasi-Newton algorithm utilizing analytic first derivatives. This procedure has been successfully applied to Galileo satellite tour trajectories.

Damario, L. A.↗

An evaluation of Galileo-Viking differenced range in Galileo-Mars flyby navigation

A summary and evaluation of the Galileo-Mars flyby navigation techniques is presented. The navigational requirements of Galileo as it swings by Mars are going to be met with interferometric angular measurements (VLBI) and range and range-rate measurements. Like VLBI, dual spacecraft differenced range is less sensitive to Mars ephemeris errors and tracking station location errors than conventional range and Doppler. Similarly, differenced range provides angular information about the separation between the Mars Viking Lander I and the Galileo spacecraft. In covariance studies, dual spacecraft range coupled with conventional range and Doppler is shown to estimate the Galileo-Mars flyby distance to better than 10 km which is comparable to the VLBI performance. For the Galileo-Mars flyby, dual spacecraft differenced range promise to be an excellent backup to VLBI if the Mars Viking Lander remains operational.

Winn, F. B.↗

The comet rendezvous asteroid flyby mission: A status report

The Comet Rendezvous Asteroid Flyby (CRAF) mission received a new start in fiscal year 1990. CRAF will match orbits with an active short-period comet and follow it around the Sun, making scientific measurements of the nucleus, coma, and tail. The Imaging system will map the nucleus surface at a resolution of 1 meter/line-pair or better, while Visible and Infrared Mapping Spectrometer (VIMS) and Thermal Infrared Radiometer Experiment (TIREX) will produce spectral and thermal maps of the surface. Onboard instruments will collect cometary dust, ice, and gases and perform elemental and molecular analysis. A suite of fields and particles instruments will observe the solar wind interaction with the cometary atmosphere and tail. Radio tracking of the spacecraft will provide an accurate measure of the nucleus mass and higher harmonics in the comet's gravity field. En route to the comet, the spacecraft will make a close flyby of a large asteroid, preferably a primitive type from the outer main belt. Observations at the asteroid include remote sensing mapping of the surface, detection of any solar wind interaction observable at the flyby distance, and measurement of the asteroid mass to better than 10 percent accuracy. Detailed design of the CRAF spacecraft is currently underway at the Jet Propulsion Laboratory (JPL). Recent mass growth has necessitated a switch to Venus-Earth gravity assist type trajectories, similar to that used by the Galileo spacecraft. These trajectories require longer flight times from launch to rendezvous with the target comet. The details of the current baseline mission, spacecraft design, and instrument payload will be reviewed.

Weissman, Paul R.↗