SEARCH · Search NASA

Results for “Forest canopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1989

An evaluation of imaging spectrometry for estimating forest canopy chemistry

High spectral resolution Airborne Imaging Spectrometer (AIS) data were acquired over 20 well-studied Wisconsin forest sites to evaluate the potential of remote sensing for estimating forest canopy chemistry. Intensive nutrient cycling research in these forests demonstrates that canopy lignin content is strongly related to measured annual nitrogen mineralization at the undisturbed sites and may serve as an accurate index for nitrogen cycling rates. Ground measurements were made of foliar biomass and canopy nitrogen and lignin content, the latter within two weeks of the AIS overflight. The spectral data were transformed using derivative techniques modified from laboratroy spectroscopy. Stepwise regression assisted in determining combinations of wavelengths most highly correlated with canopy chemistry and biomass. Strong correlations between AIS data and total canopy lignin content in deciduous forests and canopy lignin concentration (total lignin/biomass) in both deciduous and coniferous stands indicate that imaging spectrometry can be used to estimate canopy lignin content and, from that, the spatial distribution of annual nitrogen mineralization rates.

Wessman, Carol A.↗

NASA NTRS1999

Simple Forest Canopy Thermal Exitance Model

We describe a model to calculate brightness temperature and surface energy balance for a forest canopy system. The model is an extension of an earlier vegetation only model by inclusion of a simple soil layer. The root mean square error in brightness temperature for a dense forest canopy was 2.5 C. Surface energy balance predictions were also in good agreement. The corresponding root mean square errors for net radiation, latent, and sensible heat were 38.9, 30.7, and 41.4 W/sq m respectively.

Smith J. A.↗

DOE OSTI2024

Editorial: Resolving atmospheric flow in complex environments: recent experiments in terrain and forest canopies

The characterization of atmospheric flows in complex environments, which may include steep terrain slopes and heterogeneous vegetation and/or forest cover, is a long-standing challenge in boundary-layer meteorology. Atmospheric observations are complicated by the presence of transient, terrain-induced flow features, forest-canopy-atmosphere interactions, and atmospheric stability effects, not to mention the logistical hurdles involved with instrument deployment, data analysis, and quality control. Furthermore, challenges in atmospheric modeling arise due to numerical errors associated with complex terrain flows, as well as reliance on simplified parameterizations for unresolved processes such as turbulent mixing and land-surface or forest-canopy-atmosphere interactions. These modeling challenges are exacerbated in the so-called “gray zone,” wherein features of interest have length scales that are similar to the model grid spacing, or when the principal flow layer is smaller than the grid spacing (e.g., slope flows).

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1984

Determining forest canopy characteristics using airborne laser data

A study is reported in which a profiling laser system flown at relatively low altitudes over a forested area was used to measure various forest canopy attributes, including tree heights. An analysis of the data obtained indicates that canopy closure is most strongly related to the penetration capability of the laser pulse, with the pulses attenuated more quickly in a dense canopy. Laser estimates of the average tree heights differ by less than 1 m from the photogrammetrically acquired values. It is concluded that the laser system is suitable for remotely sensing the vertical forest canopy profile. Elements of this profile are linearly related to crown closure and can be used to assess tree height.

Nelson, R.↗

NASA NTRS1985

Geometric-optical modeling of a conifer forest canopy

A geometric-optical model of a conifer forest canopy was constructed to describe the variance of a remotely-sensed image of a forest stand. The model is driven by interpixel variance generated from three sources: (1) the number of crowns in the pixel; (2) the size of the individual crowns; and (3) the overlapping of crowns and shadows. The illumination of a tree and its shadow is described as a cone using parallel-ray geometry. The model can also be inverted to provide estimates of the size, shape and spacing of the trees using remotely-sensed imagery and a minimum of ground measurements. The results of field tests using 10-meter and 80-meter multispectral imagery of two test conifer stands in northeastern California are presented. It is shown that the model produces reasonable estimates for the geometric parameters of the stand and appears to be sufficiently robust for application to other geometric shapes corresponding to different types of vegetation.

Li, X.↗

NASA NTRS1989

Modeling directional thermal radiance from a forest canopy

The thermal vegetation canopy radiance model of Smith et al. (1981) is extended to account for the geometrically rough structure of a forest canopy. Fourier series expansion of a canopy height profile is used to calculate improved view facts which partially account for directional variations in canopy thermal radiance transfers. Predictions from the Smith model and the modified model are compared with experimental data obtained over a deciduous forest site in Tennessee. The results show that thermal radiance from a forest canopy depends on sensor viewing angle, solar position, and the degree of geometric roughness of the canopy surface. The maximum off-nadir angle variation in the original model was 1.6 deg C, compared with 4.4 C for the modified model.

Mcguire, M. J.↗

NASA NTRS1993

AVIRIS spectra correlated with the chlorophyll concentration of a forest canopy

Imaging spectrometers have many potential applications in the environmental sciences. One of the more promising applications is that of estimating the biochemical concentrations of key foliar biochemicals in forest canopies. These estimates are based on spectroscopic theory developed in agriculture and could be used to provide the spatial inputs necessary for the modeling of forest ecosystem dynamics and productivity. Several foliar biochemicals are currently under investigation ranging from those with primary absorption features in visible to middle infrared wavelengths (e.g., water, chlorophyll) to those with secondary to tertiary absorption features in this part of the spectrum (e.g., nitrogen, lignin). The foliar chemical of interest in this paper is chlorophyll; this is a photoreceptor and catalyst for the conversion of sunlight into chemical energy and as such plays a vital role in the photochemical synthesis of carbohydrates in plants. The aim of the research reported here was to determine if the chlorophyll concentration of a forest canopy could be correlated with the reflectance spectra recorded by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS).

Kupiec, John↗

NASA NTRS1983

Detecting forest canopy change due to insect activity using Landsat MSS

Multitemporal Landsat multispectral scanner data were analyzed to test various computer-aided analysis techniques for detecting significant forest canopy alteration. Three data transformations - differencing, ratioing, and a vegetative index difference - were tested to determine which best delineated gypsy moth defoliation. Response surface analyses were conducted to determine optimal threshold levels for the individual transformed bands and band combinations. Results indicate that, of the three transformations investigated, a vegetative index difference (VID) transformation most accurately delineates forest canopy change. Band 5 (0.6 to 0.7 micron ratioed data did nearly as well. However, other single bands and band combinations did not improve upon the band 5 ratio and VID results.

Nelson, R. F.↗

NASA NTRS1981

Effect of forest canopy closure on incoming solar radiance

In order to better understand the physical processes involved in defoliation assessment from remotely sensed data, a field study was designed to investigate the effect of forest canopy closure and other environmental variables on incoming solar radiation. Diffuse radiation measurements were recorded in red, infrared, and middle infrared wavelengths using the Mark 2 three band field radiometer. Results to date indicate that the percent canopy closure is the single most important variable affecting incoming solar radiation. In the visible and near infrared regions, interaction between time of day and date (defined later as solar zenith angle) also affect radiometric response. Aspect has only limited influence on radiance response. These same variables do not influence middle infrared response, however. Uniformity of the forest canopy appears to be more important. These results are compared to LANDSAT MSS classification results of gypsy moth defoliation.

Dottavio, C. L.↗

NASA NTRS1994

Estimation of Forest Canopy Leaf Area Index Using Directional ASAS Measurements

Coniferous forest canopy reflectance was derived from radiance data collected the Advanced Solid-State Array Spectroradiometer (ASAS). Red and Near-InfraRed (NIR) responses were examined as a function of view zenith angle (theta(sub v)), solar zenith angle (theta(sub s)), and site characteristics. Relationships were formulated between the Normalized Difference Vegetation Index (NDVI) and canopy Leaf Area Index (LAI). It is suggested that the offnadir NDVI is a more stable estimator of LAI than is the nadir-view NDVI.

Johnson, Lee F.↗

DOE OSTI2025

The Turbulent Pressure Spectrum Within the Roughness Sublayer of a Subarctic Forest Canopy

The turbulent static pressure spectrum E pp (k x ) as a function of longitudinal wavenumber k x in the roughness sublayer of forested canopies is of interest to a plethora of problems such as pressure transport in the turbulent kinetic energy budget, pressure pumping from snow or forest floor, and coupling between flow within and above canopies. Long term static pressure measurements above a sub-arctic forested canopy for near-neutral conditions during the winter and spring were collected and analyzed for three snow cover conditions: trees and ground covered with snow, trees are snow free but the ground is covered with snow, and snow free cover. In all three cases, it is shown that E pp (k x ) obeys the attached eddy hypothesis at low wavenumbers (1/δ < k x < 1/z) —with E pp (k x ) ∝ u$^4_*$k$^{-1}_x$ and Kolmogorov scaling in the inertial subrange at higher wavenumbers—with E pp (k x ) ∝ ϵ 4/3 k x -7/3 , where u * is the friction velocity at the canopy top, is the mean turbulent kinetic energy dissipation rate, z is the distance from the snow top, and is the boundary layer depth. The implications of these two scaling laws to the normalized root-mean squared pressure C p = o p /u$^2_*$ and its newly proposed logarithmic scaling with normalized wall-normal distance z/δ are discussed for snow covered and snow free vegetation conditions. The work here also shows that k$^{-1}_x$ the in the E pp (k x ) appears more extensive and robust than its longitudinal velocity counterpart.

Aslan, Toprak [Finnish Meteorological Inst., Helsi↗

NASA NTRS1986

Preliminary report on measurements of forest canopies with C-band radar scatterometer at NASA/NSTL

This paper presents preliminary results of C-band radar scatterometer measurements of forest canopies of southeastern forests in the vicinity of NASA/NSTL. The results are as follows: radar backscattering coefficients (BSCs) of deciduous forests are higher than those of coniferous forests at a large incidence angle by ranging measurement, the VV polarization BSCs obtain peak value at the first few meters from the canopy top and decrease rather quickly, while the HH polarization BSCs obtain peak value at longer distances from the canopy top and decrease rather slowly through the canopy; and tree canopies with higher attenuations have higher BSCs for all three polarizations, with VV polarization containing the largest differential (2.2 dB).

Wu, S.-T.↗

NASA NTRS2021

Maya Forest Water Resources II: Mapping Inundation Below the Forest Canopy in the Maya Tri-National Forest

To monitor seasonal flooding within the tri-National Maya Forest the team completed the methodology started by the Summer 2021 term to analyze changes in inundation dynamic throughout 2017. The team analyzed inundation dynamics in Google Earth Engine (GEE) using Earth observation products from the Landsat 8 Operational Land Imager (OLI), Advanced Land Observing Satellite (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR) 2, and International Space Station (ISS) Global Ecosystem Dynamics Investigation LiDAR (GEDI). The team improved the landcover classification using the Random Forest algorithm in GEE by adding canopy height data derived from GEDI, elevation and slope data from Copernicus, and additional multi-spectral band ratios from Landsat 8. The pixel-based land cover classification produced an overall accuracy of 88%. Experiments measuring inundation extent using L-band SAR included comparing results with a priori knowledge, topography datasets, and auxiliary datasets. We iteratively tested and found threshold values for identifying forested inundation using the ratio for HH divided by HV. The resulting methodology and products helped end users from Belize’s Land Information Center (LIC) and Forest Department, Guatemala’s Center for Monitoring and Evaluation (CEMEC), and Mexico’s El Colegio de la Frontera Sur (ECOSUR) manage land and water resources and protect communities.

Stephanie Jiménez↗

NASA NTRS1985

A preliminary report on the measurements of forest canopies with C-band radar scatterometer at NASA/NSTL

This paper presents preliminary results of C-band radar scatterometer measurements of forest canopies of southeastern forests in the vicinity of NASA/NSTL. The results are as follows: (1) the radar backscattering coefficients (BSC) of deciduous forests such as oak, maple, blackgum, and cypress are higher than those of coniferous forests such as slash pine plantation and natural pine; (2) at a large incidence angle, where polarization effect is significant, and by ranging measurement, the VV polarization BSC obtain peak value at the first few meters from the canopy top and decrease rather quickly, while the HH polarization BSC obtain peak value at longer distances from the canopy top and decrease rather slowly through the canopy; and (3) using the active radar calibrator for tree canopy attenuation measurement of a dense and a sparse live oak, it is found that the tree canopies with higher attenuations have higher BSC for all three polarizations, with VV polarization containing the largest differential (2.2 dB).

Wu, S. T.↗

NASA NTRS1984

Collection of in situ forest canopy spectra using a helicopter - A discussion of methodology and preliminary results

An important part of fundamental remote sensing research is based on the measurement and analysis of spectral reflectance from earth surface materials in situ. It has been found that for an effective analysis of the target of interest, different applications of remotely sensed data require spectral measurements from different portions of the electromagnetic spectrum. It is pointed out that the detailed spectral reflectance characteristics of forest vegetation are currently not well understood, particularly in the middle infrared wavelength region. Details regarding the need for in situ forest canopy measurements are examined, taking into account certain difficulties arising in the case of satellite observations. Because of these difficulties, the present paper provides a discussion of methodology and preliminary spectra based on an experiment to use a helicopter as an observing platform for in situ forest canopy spectra measurement.

Williams, D. L.↗

NASA NTRS2020

SMAP Detects Soil Moisture under Temperate Forest Canopies

Soil moisture dynamics in the presence of dense vegetation canopies are determinants of ecosystem function and biogeochemical cycles, but the capability of existing spaceborne sensors to support reliable and useful estimates is not known. New results from a recently initiated field experiment in the northeast United States show that the NASA SMAP (Soil Moisture Active Passive) satellite is capable of retrieving soil moisture under temperate forest canopies. We present an analysis demonstrating that a parameterized emission model with the SMAP morning overpass brightness temperature resulted in a RMSD (root mean square difference) range of 0.047-0.057 m(exp 3)/m(exp 3) and a Pearson correlation range of 0.75-0.85 depending on the experiment location and the SMAP polarization. The inversion approach included a minimal amount of ancillary data. This result demonstrates unequivocally that spaceborne L-band radiometry is sensitive to soil moisture under temperate forest canopies, which has been uncertain because of lack of representative reference data.

Andreas Colliander↗

NASA NTRS2016

High Upward Fluxes of Formic Acid from a Boreal Forest Canopy

Eddy covariance fluxes of formic acid, HCOOH, were measured over a boreal forest canopy in spring/summer 2014. The HCOOH fluxes were bidirectional but mostly upward during daytime, in contrast to studies elsewhere that reported mostly downward fluxes. Downward flux episodes were explained well by modeled dry deposition rates. The sum of net observed flux and modeled dry deposition yields an upward gross flux of HCOOH, which could not be quantitatively explained by literature estimates of direct vegetative soil emissions nor by efficient chemical production from other volatile organic compounds, suggesting missing or greatly underestimated HCOOH sources in the boreal ecosystem. We implemented a vegetative HCOOH source into the GEOS-Chem chemical transport model to match our derived gross flux and evaluated the updated model against airborne and spaceborne observations. Model biases in the boundary layer were substantially reduced based on this revised treatment, but biases in the free troposphere remain unexplained.

forest↗

NASA NTRS1994

Retrieval of Forest Canopy Parameters for OTTER Using an Optimized Technique

An inversion algorithm based on a nonlinear optimization technique is used to retrieve a subset of forest canopy parameters that can be used in ecosystem modeling. The inversion algorithm uses a parametric model derived from a discrete component forest scattering model which includes all major scattering contributions to radar backscatter. The parametric model, however, is derived for cases where only one mechanism dominates the scattering process, in this case, branch layer volume scattering.The inversion algorithm is shown to be a useful tool in the quantative monitoring of canopy moisture status, as well as a building block of its future versions which will include a more comprehensive set of forest scattering parameters as unknowns.

forest↗