Search NASA⌕ Search

SEARCH · Search NASA

Results for “GLASS COATING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Glass Coats For Hot Isostatic Pressing

Surface voids sealed from pressurizing gas. Coating technique enables healing of surface defects by hot isostatic pressing (HIP). Internal pores readily closed by HIP, but surface voids like cracks and pores in contact with pressurizing gas not healed. Applied to casting or weldment as thick slurry of two glass powders: one melts at temperature slightly lower than used for HIP, and another melts at higher temperature. For example, powder is glass of 75 percent SiO2 and 25 percent Na2O, while other powder SiO2. Liquid component of slurry fugitive organic binder; for example, mixture of cellulose acetate and acetone. Easy to apply, separates voids from surrounding gas, would not react with metal part under treatment, and easy to remove after pressing.

Ecer, Gunes M.↗
NASA NTRS1978

Effect of silicon carbide on devitrification of a glass coating for reusable surface insulation

Devitrification (nucleation and growth of cristobalite) were investigated in the LI-0042 coating used for the space shuttle surface insulation. Excessive devitrification was found to be associated with the silicon carbide (SiC) constituent in the coating. Test results show that significant devitrification occurred only when SiC was present in the coating and when the thermal-exposure atmosphere was oxidizing.

Ransone, P. O.↗
NASA NTRS1981

Cross-linked polyvinyl pyridine coated glass particle catalyst support and aqueous composition or polyvinyl pyridine adducted microspheres

Microspheres are produced by cobalt gamma radiation initiated polymerization of a dilute aqueous vinyl pyridine solution. Addition of cross-linking agent provides higher surface area beads. Addition of monomers such as hydroxyethylmethacrylate acrylamide or methacrylamide increases hydrophilic properties and surface area of the beads. High surface area catalytic supports are formed in the presence of controlled pore glass substrate.

Rembaum, Alan↗
NASA NTRS2003

Studies Conducted of Sodium Carbonate Contaminant Found on the Wing Leading Edge and the Nose Cap of the Space Shuttle Orbiter

In early 2001, three of the space shuttle orbiters were found to have a sodium carbonate contaminant on the wing leading edge and nose cap. These parts are made of a reinforced carbon/carbon material protected by silicon carbide (SiC) and a glass coating. The glass coating is known as Type A and is primarily sodium silicate with particles of SiC. NASA Glenn Research Center's Environmental Durability Branch was asked to determine the chemistry of this deposit formation and assess any possible detrimental effects. At low temperatures, the reverse reaction is favorable. Previous studies of the corrosion of glass show that carbon dioxide in the presence of water does form sodium carbonate on sodium silicate glass (ref. 1). It is quite likely that a similar scenario exists for the orbiter wing leading edge. All three orbiters that formed sodium carbonate were exposed to rain. This formation of sodium carbonate was duplicated in the laboratory. The Type A glass, which coats the wing leading edge and nose cap, was made in a freestanding form and exposed to water in two separate experiments. In one set of experiments, the coating was placed in a petri dish filled with water. As the water evaporated, sodium carbonate formed. In another case, water was slowly dripped on the coating and sodium carbonate formed. The sodium carbonate was detected by chemical analysis and, in some cases, xray diffraction showed a hydrated sodium carbonate. The next step was to examine possible detrimental effects of this sodium carbonate. There are three likely scenarios for the sodium carbonate deposit: (1) it may be removed with a simple rinse, (2) it may remain and flow back into the Type A glass after heating during reentry, or (3) it may remain and flow onto unprotected SiC and/or other parts after heating during reentry. The effect of case 1 is to remove the Na2O constituent from the Type A glass, thus decreasing its effectiveness as a sealant. Even so, overall, it is probably the best approach and was used by the NASA Kennedy Space Center when the deposits were first observed. The effect of case 2 is minimal and would actually restore the the Type A glass to its composition before carbonate formation. However, the problem with allowing the carbonate to remain leads to the third scenario, the deposit flowing onto other parts. A series of tests were conducted on unprotected SiC, and minimal effects were found in the short-term, but other ceramic and metal parts could be damaged by the molten sodium carbonate and would require close monitoring.

Jacobson, Nathan S.↗
NASA NTRS1979

Lunar sample analysis

The surface composition of two samples from the highly shocked, glass-coated lunar basalt (12054) and from four glass-coated fragments from the 1-2 mm (14161) fines were examined by X-ray photoemission spectroscopy to determine whether the agglutination process itself is responsible for the difference between their surface and bulk compositions. Auger electron spectroscopy of glass balls from the 15425 and 74001 fines were analyzed to understand the nature, extent, and behavior of volatile phases associated with lunar volcanism. Initial results indicate that (1) volatiles, in the outer few atomic layers sampled, vary considerably from ball to ball; (2) variability over the surface of individual balls is smaller; (3) the dominant volatiles on the balls are S and Zn; and (4) other volatiles commonly observed are P, Cl, and K.

Housley, R. M.↗
NASA NTRS2013

Petrography and Geochemistry of Feldspathic Lunar Meteorite Larkman Nunatak 06638

LAR 06638 is a glassy-matrix lunar regolith breccia based on the presence of glass spherules, which also contains prominent clasts of a feldspathic fragmental breccia lithology. The similarity in composition of the two lithologies is unsurprising given the observed similarities in the clast populations and mineral compositions in both lithologies. The small differences in composition are likely explained by the incorporation of small amounts of more diverse material into the regolith breccia lithologies, e.g., KREEPy glass clasts to account for the higher siderophile and ITE concentrations and excess plagioclase to account for the lower concentrations of mafic elements and increased Na concentrations. Given the relatively small masses analyzed (approx.120 mg of each lithology), these small compositional differences could also be sampling effects. The presense of multiple generations of glass coatings on LAR 06638 is, to our knowledge, unique among lunar meteorites. The more mafic, schlieren and nanophase Fe bearing glass is similar in morphology to the South Ray Crater glass coatings at the Apollo 16 site [3] and likely has a similar origin. The outer, more feldspathic glass has a morphology typical of fusion crust observed on other feldspathic lunar meteorites. It is unclear at this time whether the partially melted glass area represents a partially formed fusion crust or incipient melting due to heating on the lunar surface, likely from an overlying (and possibly ablated) glass splash coating. LAR 06638 is unlikely to be source-crater paired with any other lunar meteorites. For all elements, it plots right in the range of "typical feldspathic lunar meteorites" [4]. Among lunar meteorites from Antarctica, LAR 06638 most closely resembles MAC 88104/5 in composition, although it is slightly more feldspathic and 1.8 richer in siderophile elements. Compositionally it is more similar to hot-desert meteorites like Dhofar 490/1084 and NWA 2200 [4].

Zeigler, Ryan A.↗
NASA NTRS1991

Reinforced Positive Filler Paste For Lead/Acid Batteries

Lead-coated glass fibers extend battery life. Mixture of lead-coated glass fibers and positive paste form pellets of active material between grid wires of positive battery electrode. Fibers contribute to charge capacity, electrical conductivity, and mechanical stability of electrode.

Edwards, Dean B.↗
NASA NTRS2005

Photocatalytic Coats in Glass Drinking-Water Bottles

According to a proposal, the insides of glass bottles used to store drinking water would be coated with films consisting of or containing TiO2. In the presence of ultraviolet light, these films would help to remove bacteria, viruses, and trace organic contaminants from the water.

Andren, Anders W.↗
NASA NTRS1993

High Tech Art: Chameleon Glass

Dichroic Glass is a technology wherein extremely thin films of metal are vacuum deposited on a glass surface. The coated glass shields spacecraft instruments from cosmic radiation and protects human vision from unfiltered sunlight in space. Because the coating process allows some wavelengths of light and color to reflect and others to pass through, a chameleon effect is produced. Murray Schwartz, a former aerospace engineer, has based his business KROMA on this NASA optical technology. He produces dichroic stained glass windows, mobiles and jewelry. The technique involves deposition of super thin layers of metal oxides applied one layer at a time in a specific order and thickness for the desired effect. His product line is unique and has been very successful.

Source record↗
NASA NTRS1982

Method of repairing surface damage to porous refractory substrates

A damaged porous refractory material coated with a glass coating is repaired by applying hydrolyzed tetraethyl orthosilicate to the damaged area and curing it. A pliable filler comprised of hydrolyzed tetraethyl orthosilicate and powdered refractory substrate is then applied to the area which is then heated.

Ecord, G. M.↗
NASA NTRS1982

Polymer coating of glass microballoons levitated in a focused acoustic field

Inertial confinement fusion (ICF) glass microballoons (GMBs) levitated in a focusing radiator acoustic device can be coated with liquid materials by deploying the liquid into the levitation field with a stepped-horn atomizer. The GMB can be forced to the center of the coating liquid with a strong acoustically generated centering force. Water solutions of organic polymers, UV-curable liquid organic monomers, and paraffin waxes have been used to prepare solid coatings on the surface of GMBs using this technique.

Young, A. T.↗
NASA NTRS1974

Plasma-sprayed metal-glass and metal-glass fluoride coatings for lubrication to 900 C

Plasma-sprayed composites, which have good oxidation resistance and self-lubricating characteristics to 900 C, were developed. The composites are a nichrome matrix containing dispersed glass for oxidation protection and calcium fluoride for lubrication; they are applied to bearing surfaces by plasma spraying layers about 0.050 cm thick which are then machined to 0.025 cm. Oscillating bearing tests were performed in air to 900 C at unit radial loads up to 5000 psi and a thrust load of 440 lb. Bearings with a composite liner in the bore were in good condition after over 50,000 oscillating cycles accumulated during repeated bearing temperature cycles between 25 and 900 C.

Sliney, H. E.↗
NASA NTRS1973

Plasma-sprayed metal-glass and metal-glass fluoride coatings for lubrication to 900 C

Plasma-sprayed composites, which have good oxidation-resistance and self-lubricating characteritics to 900 C, were developed. The composites are a nichrome matrix containing dispersed glass for oxidation protection and calcium fluoride for lubrication; they are applied to bearing surfaces by plasma spraying layers about 0.050 centimeters thick which are then machined to 0.025 centimeters. Oscillating bearing tests were performed in air to 900 C at unit radial loads up to 3.5 x 10 to the 7th power N/sq M (5000 psi) and a thrust load of 1960N (440 lbs). Bearings with a composite liner in the bore were in good condition after over 50,000 oscillating cycles accumulated during repeated, bearing temperatures cycles between 25 and 900 C.

Sliney, H. E.↗
NASA NTRS1976

Consortium investigation of breccia 67435

The paper presents results of the initial phase of a consortium investigation of lunar rock 67435, a glass coated breccia which contains a unique spinel-troctolite clast. These results include oxygen isotopic data for the host breccia, bulk composition data for the host breccia, glass coating and a large aphanitic clast, and detailed petrographic descriptions of all lithologies encountered.

Warner, R. D.↗
NASA NTRS1993

Measurements of cosmogenic nuclides in lunar rock 64455

Eleven samples were ground from the glass coated surface of lunar rock 64455,82 with an average depth resolution of 50 microns and were measured for Be-10, Al-26, and Cl-36 using AMS (accelerator mass spectrometry). Results show no evidence of SCR (solar cosmic ray) effects. The flat cosmogenic nuclide profiles and activity levels are consistent with a 2 My exposure history for the rock and a sample location on the bottom of the rock. These AMS measurements are some of the most precise ever obtained for these three nuclides. This precision and the demonstrated fine depth resolution will enable us to conduct a number of detailed studies of depth effects in lunar and meteoritic samples, including investigating SCR effects in the surface exposed top of the glass coating of 64455 and possibly in the underlying rock.

Arnold, J. R.↗