Search NASA⌕ Search

SEARCH · Search NASA

Results for “GO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Use of load and go countdowns by the DSN deep space stations

The Level-4 Prepass Readiness Test (PRT) (the load and go countdown) provides an effective and low risk method of improving network productivity. A carefully controlled trial period preceded the full-scale application of the Level-4 PRTS to Pioneer, Helios, and Viking cruise tracking operations. Use of this load and go concept to count down a station brings about a substantial increase in the proportion of total station hours devoted to spacecraft tracking.

Hatch, J. T.↗
NASA NTRS1983

A flight-test evaluation of a go-around control system for a twin engine powered-lift STOL airplane

An automatic go-around control system was evaluated on the Augmentor Wing Jet Short Takeoff and Landing (STOL) Research Airplane (AWJSRA) as part of a study of an automatic landing system for a powered-lift STOL airplane. The results of the evaluation indicate that the go-around control system can successfully transition the airplane to a climb configuration from any initiation point during the glide-slope track or the flare maneuver prior to touchdown.

Watson, D. M.↗
NASA NTRS1992

Hubble space telescope: The GO and GTO observing programs, version 3.0

A portion of the observing time with the Hubble Space Telescope (HST) was awarded by NASA to scientists involved in the development of the HST and its instruments. These scientists are the Guaranteed Time Observers (GTO's). Observing time was also awarded to General Observers (GO's) on the basis of the proposal reviews in 1989 and 1991. The majority of the 1989 programs have been completed during 'Cycle 1', while the 1991 programs will be completed during 'Cycle 2', nominally a 12-month period beginning July 1992. This document presents abstracts of these GO and GTO programs, and detailed listings of the specific targets and exposures contained in them. These programs and exposures are protected by NASA policy, as detailed in the HST Call for Proposals (CP), and are not to be duplicated by new programs.

Downes, Ron↗
NASA NTRS1994

HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 3: HARP Graphics Oriented (GO) input user's guide

The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems, and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical preprocessor Graphics Oriented (GO) program. GO is a graphical user interface for the HARP engine that enables the drawing of reliability/availability models on a monitor. A mouse is used to select fault tree gates or Markov graphical symbols from a menu for drawing.

Bavuso, Salvatore J.↗
NASA NTRS2001

Touch and Go Surface Sampler (TGSS)

The Touch and Go Surface Sampler (TGSS) is a new class of planetary and small body sample acquisition tool that can be used for the surface exploration of Europa, Titan and comets. TGSS in its basic configuration consists of a high speed sampling head attached to the end of a flexible shaft. The sampling head consists of counter rotating cutters that rotates at speeds of 3000 to 15000 RPM. The attractive feature of this if touch and go type sampler is that there are no requirements for a lander type spacecraft. Additional information is contained in the original extended abstract.

Gorevan, S. P.↗
NASA NTRS2005

Going Commercial

while the conditions are more rigorous today for the ISS than they were in the very early days of space travel, opportunities still abound, and we just need to overcome the hurdles. As Pogo put it, "By gosh, we seem to be surrounded by an insurmountable opportunity here." This really is a great time in human spaceflight. We re doing marvelous things up there from an engineering standpoint. We now have to put them to good use. We need to optimize the 30 percent of the ISS that our federal government and the international partners have available in terms of the Station s power, volume, and crew time. Despite the recent issues with cost and schedule, as Mr. Goldin has said, this Agency will find a way. This country and the partners will find a way to restore the ISS s capability. We need help from this government, from our Congress, from our partners to do that, but it will be done, and then this facility is going to be world class--nah, it will out-of-this- world class. I m pleased to be a part of not only the history of spaceflight and the history of industry s participation in spaceflight, but I m also pleased to be a part of the future, the future applications, the future benefits that our spaceflight program is going to bring to our economy, to our careers, and to those of us that are both taxpayers and participants as well, to the great joy of seeing success as part of this country, as a part of our intellect, applied to the great beyond.

Walker, Charles↗
NASA NTRS2009

Integrated Modeling of Spacecraft Touch-and-Go Sampling

An integrated modeling tool has been developed to include multi-body dynamics, orbital dynamics, and touch-and-go dynamics for spacecraft covering three types of end-effectors: a sticky pad, a brush-wheel sampler, and a pellet gun. Several multi-body models of a free-flying spacecraft with a multi-link manipulator driving these end-effectors have been tested with typical contact conditions arising when the manipulator arm is to sample the surface of an asteroidal body. The test data have been infused directly into the dynamics formulation including such information as the mass collected as a function of end-effector longitudinal speed for the brush-wheel and sticky-pad samplers, and the mass collected as a function of projectile speed for the pellet gun sampler. These data represent the realistic behavior of the end effector while in contact with a surface, and represent a low-order model of more complex contact conditions that otherwise would have to be simulated. Numerical results demonstrate the adequacy of these multibody models for spacecraft and manipulator- arm control design. The work contributes to the development of a touch-and-go testbed for small body exploration, denoted as the GREX Testbed (GN&C for Rendezvous-based EXploration). The GREX testbed addresses the key issues involved in landing on an asteroidal body or comet; namely, a complex, low-gravity field; partially known terrain properties; possible comet outgassing; dust ejection; and navigating to a safe and scientifically desirable zone.

Quadrelli, Marco↗
NASA NTRSDate not supplied

Going beyond reliability to achieve robustness

Reliability is the ability to perform well and consistently. More formally, reliability is defined as the mathematical probability that a system does not fail during a specified time period under its specified operating conditions. The specified operating conditions often go beyond the nominal environment to include variations and challenges encountered in operational use. The difficulty is that systems are often operated outside of their specified operating conditions and, if they fail, the designers are in theory blameless. Unanticipated damaging events include internal failures, external disruptions in supporting systems, accidents, and repurposing. The most common explanation of a system failure is human error, which is usually the first assumption of the system designers. Robustness is the capability to perform without failure under a wide range of conditions that go beyond the specified operating conditions. The first step towards improving robustness would be to expand the system’s specified operating conditions to include a wider range of anticipated challenges, especially human error. Beyond this, there is a need for general approach to reduce the impact of unanticipated future events, the unknown unknowns, by improving the system’s general ability to cope. Robustness can be improved by providing additional processing capacity, larger flow control buffers, increased backup storage, more online redundancy, and more capable supervisory monitoring and control.

Harry W Jones↗
NASA NTRS2011

Trajectory Design Considerations for Small Body Touch-and-Go

Outline: (1) Trajectory Description (2) Design Drivers: (2a) Dynamics (2b) Environment (2c) Spacecraft and Ground and System Capabilities (2d) Mission Objectives (3) Design Choices (4) Historical Precedents (5) Case Studies. What is Touch-and-Go (TAG)? (1) Descent to the surface (2) Brief contact (3) Ascends to a safe distance

comets↗
NASA NTRS2012

Analysis of the Touch-And-Go Surface Sampling Concept for Comet Sample Return Missions

This paper studies the Touch-and-Go (TAG) concept for enabling a spacecraft to take a sample from the surface of a small primitive body, such as an asteroid or comet. The idea behind the TAG concept is to let the spacecraft descend to the surface, make contact with the surface for several seconds, and then ascend to a safe location. Sampling would be accomplished by an end-effector that is active during the few seconds of surface contact. The TAG event is one of the most critical events in a primitive body sample-return mission. The purpose of this study is to evaluate the dynamic behavior of a representative spacecraft during the TAG event, i.e., immediately prior, during, and after surface contact of the sampler. The study evaluates the sample-collection performance of the proposed sampling end-effector, in this case a brushwheel sampler, while acquiring material from the surface during the contact. A main result of the study is a guidance and control (G&C) validation of the overall TAG concept, in addition to specific contributions to demonstrating the effectiveness of using nonlinear clutch mechanisms in the sampling arm joints, and increasing the length of the sampling arms to improve robustness.

Touch-and-Go (TAG)↗
NASA NTRS2014

OSIRIS-REx Touch-and-Go (TAG) Mission Design for Asteroid Sample Collection

The Origins Spectral Interpretation Resource Identification Security Regolith Explorer (OSIRIS-REx) mission is a NASA New Frontiers mission launching in September 2016 to rendezvous with the near-Earth asteroid Bennu in October 2018. After several months of proximity operations to characterize the asteroid, OSIRIS-REx flies a Touch-And-Go (TAG) trajectory to the asteroid's surface to collect at least 60 g of pristine regolith sample for Earth return. This paper provides mission and flight system overviews, with more details on the TAG mission design and key events that occur to safely and successfully collect the sample. An overview of the navigation performed relative to a chosen sample site, along with the maneuvers to reach the desired site is described. Safety monitoring during descent is performed with onboard sensors providing an option to abort, troubleshoot, and try again if necessary. Sample collection occurs using a collection device at the end of an articulating robotic arm during a brief five second contact period, while a constant force spring mechanism in the arm assists to rebound the spacecraft away from the surface. Finally, the sample is measured quantitatively utilizing the law of conservation of angular momentum, along with qualitative data from imagery of the sampling device. Upon sample mass verification, the arm places the sample into the Stardust-heritage Sample Return Capsule (SRC) for return to Earth in September 2023.

OSIRIS-REX TOUCH-AND-GO (TAG) MISSION DESIGN FOR A↗
NASA NTRS2015

OSIRI-REx Touch and Go (TAG) Navigation Performance

The Origins Spectral Interpretation Resource Identification Security Regolith Explorer (OSIRIS-REx) mission is a NASA New Frontiers mission launching in 2016 to rendezvous with the near-Earth asteroid (101955) Bennu in late 2018. Following an extensive campaign of proximity operations activities to characterize the properties of Bennu and select a suitable sample site, OSIRIS-REx will fly a Touch-And-Go (TAG) trajectory to the asteroid's surface to obtain a regolith sample. The paper summarizes the mission design of the TAG sequence, the propulsive maneuvers required to achieve the trajectory, and the sequence of events leading up to the TAG event. The paper also summarizes the Monte-Carlo simulation of the TAG sequence and presents analysis results that demonstrate the ability to conduct the TAG within 25 meters of the selected sample site and 2 cm/s of the targeted contact velocity. The paper describes some of the challenges associated with conducting precision navigation operations and ultimately contacting a very small asteroid.

Security Regolith Explorer↗
NASA NTRS1973

Two bonded half planes with a crack going through the interface

The plane problem of two bonded elastic half planes containing a finite crack perpendicular to and going through the interface is considered. The problem is formulated as a system of singular integral equations with generalized Cauchy kernels. Even though the system has three irregular points, it is shown that the unknown functions are algebraically related at the irregular point on the interface and the integral equations can be solved by a method developed previously. The system of integral equations is shown to yield the same characteristic equation as that for two bonded quarter planes in the general case of the through crack, and the characteristic equation for a crack tip terminating at the interface in the special case. The numerical results given in the paper include the stress intensity factors at the crack tips, the normal and shear components of the stress intensity factors at the singular point on the interface, and the crack surface displacements.

Erdogan, F.↗
NASA NTRS1974

Antiplane shear crack terminating at and going through a bimaterial interface

The antiplane shear problem of two bonded elastic half-planes containing a crack perpendicular to the interface is considered. The cases of a semiinfinite crack terminating at the interface, a finite crack away from and terminating at the interface, two cracks one on each side of the interface, and a finite crack crossing the interface are separately investigated. The nature of the stress singularity for the crack terminating at and going through the interface is studied, and it is shown that at the irregular point on the interface, for the former the power of singularity is not -1/2 and for the latter the stresses are bounded. For a material pair of aluminum-epoxy some numerical results giving the stress intensity factors, the density functions, and the crack opening displacements are presented.

Erdogan, F.↗