Search NASA⌕ Search

SEARCH · Search NASA

Results for “GRAIN ORIENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Abnormal grain growth induced by grain boundary segregation of yttrium in grain-oriented Fe-3%Si steel

Highlights: • The abnormal grain growth in Fe-3%Si was induced without precipitates by alloying of yttrium. • Grains grew abnormally to sizes exceeding 10 mm after secondary recrystallization. • Observations by the Laue diffraction method confirmed that the abnormally grown grains had the Goss orientation. The possibility of abnormal grain growth in grain-oriented Fe-3%Si steel by grain boundary segregation was investigated. Yttrium was selected to inhibit normal grain growth because its segregation at grain boundaries would efficiently reduce the grain boundary energy of iron, decreasing the driving force for grain growth. After secondary recrystallization, abnormal grain growth was successfully achieved without any precipitates. Observations by the Laue diffraction method confirmed that the abnormally grown grains had the Goss orientation.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Acquisition of partial grain orientation information using optical microscopy

Optical microscopy (OM) is often the first technique used to characterize surfaces of materials because of its simplicity and low cost. However, the information obtained by OM is usually limited to the geometry and spatial distribution of microstructural features. We present an advanced OM technique to perform quantitative microstructure analysis of polycrystalline metals and to assess partial grain orientation information from measurements of reflectance over a range of incident light directions. Our technique relies on the collection of a series of optical micrographs under controlled illumination conditions. We find a marked direction-dependence of reflectance and ascribe it to sub-micron facets on the surfaces of individual grains. These surface facets are, in turn, correlated to grain orientation. We automate our technique via digital processing and numerical analysis of micrographs, enabling it to generate a wealth of microstructure data while remaining simple to use and inexpensive to implement.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Effect of grain orientation on aluminum relocation at incipient melt conditions

Aluminum is commonly used for structural applications in the aerospace industry because of its high strength in relation to its weight. It is necessary to understand the mechanical response of aluminum structures at elevated temperatures such as those experienced in a fire. Additionally, aluminum alloys exhibit many complicated behaviors that require further research and understanding, such as aluminum combustion, oxide skin formation and creep behavior. This paper discusses the effect of grain orientation on aluminum deformation subjected to heating at incipient melt conditions. Experiments were conducted by applying a vertical compressive force to aluminum alloy 7075 block test specimens. Furthermore, compression testing was done on test specimens with the applied load on the long transverse and short transverse orientations. Our results showed that the grain orientation significantly influences aluminum’s strength and mode of failure.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Secondary recrystallization behavior in strip-cast grain-oriented silicon steel processed by isothermal secondary annealing

Highlights: • Abnormal grain growth was successfully developed after annealing at 1025 °C for 15 min. • The formation mechanism of the Goss and {110}<227> secondary grains was elucidated. • Retention of matrix grain colonies in the interior or at the grain boundaries of secondary grains was explained. - Abstract: The primary annealed sheets of strip-cast grain-oriented silicon steel were isothermally secondary annealed for 15 min under 100% H{sub 2} atmosphere. The microstructure and crystallographic orientation at different annealing temperatures were characterized and the secondary recrystallization behavior was elucidated. It was observed that relatively complete abnormal grain growth occurred at 1025 °C. Incomplete abnormal grain growth developed when the temperature was lower than 1025 °C, and normal grain growth occurred when the temperature was higher than 1025 °C. During the abnormal grain growth, both of the Goss and {110}<227> grains developed because of the rapid decrease of the inhibiting force and the limited annealing time. Considering the high energy boundary (HE), coincidence site lattice boundary (CSL) and solid-state wetting (SSW) models for abnormal grain growth, the first one explained the development of the Goss and {110}<227> grains. Another result was that several matrix grain colonies were observed in the interior or at the boundaries of secondary grains after abnormal grain growth. The grains at the periphery of these colonies showed a large fraction of high energy boundaries (20–45° misorientation) with the surrounding secondary grain and similar grain size with the unconsumed matrix grains. Therefore, these colonies were expected to be consumed by prolonging the annealing time and thus the limited annealing time was responsible for their occurrence. A possible explanation for the dominated high energy boundaries instead of low energy boundaries at the periphery of these colonies was proposed. All of these behaviors promoted the understanding of abnormal grain growth.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Giant piezoelectric voltage coefficient in grain-oriented modified PbTiO 3 material

A rapid surge in the research on piezoelectric sensors is occurring with the arrival of the Internet of Things. Single-phase oxide piezoelectric materials with giant piezoelectric voltage coefficient (g, induced voltage under applied stress) and high Curie temperature (T c ) are crucial towards providing desired performance for sensing, especially under harsh environmental conditions. Here, we report a grain-oriented (with 95% <001> texture) modified PbTiO 3 ceramic that has a high T c (364°C) and an extremely large g 33 (115 × 10 -3 Vm N -1 ) in comparison with other known single-phase oxide materials. Our results reveal that self-polarization due to grain orientation along the spontaneous polarization direction plays an important role in achieving large piezoelectric response in a domain motion-confined material. Finally, the phase field simulations confirm that the large piezoelectric voltage coefficient g 33 originates from maximized piezoelectric strain coefficient d 33 and minimized dielectric permittivity ε 33 in [001]-textured PbTiO 3 ceramics where domain wall motions are absent.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel

The experimentally measured grain-orientation-dependent residual lattice strains, evolved in an interstitia-free steel after 70% cold rolling reduction, are studied by means of crystal elastic visco-plastic finite element simulations, which provides a very satisfactory prediction of deformation texture. The calculated residual lattice strain pole figure matches well with the experimentally measured counterpart within the highest density regions of major texture components observed. Both experimental evidence and results of modeling clearly indicate that the residual lattice strain is orientation dependent, based on comprehensive information on the evolution of residual lattice strain in various crystallographic orientations during plastic deformation. It appears that in a cold rolled material, there is a general correlation between the stresses developed just prior to unloading and the residual lattice strains in particular directions. Here, it is also shown that the cumulative plastic shear does not reveal a clear correlation with the components of residual lattice strain while presented in the normal correlation plot, however, this relationship can be better understood by means of the orientation distribution function of residual lattice strain, which can be derived from the neutron or X-ray diffraction experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Influence of Temperature on the Texture Distribution in Two-Phase Region Hot Deformation of Grain-Oriented Silicon Steel

Hot deformation simulation test of 3% Si grain-oriented silicon (CGO) steel was carried out at different temperatures, and evolution of microstructures and recrystallized textures in two-phase region was analyzed by electron backscatter diffraction and optical microscopy. The “δ → γ” and “γ → α” phase transformation points of the two-phase region measured by differential scanning calorimetry method are 1272 and 819 °C, respectively, which are within the ranges of 1300-1350 and 800-850 °C, measured by water quenching. The hot deformation temperature has a large effect on the microstructure and texture in the steel. A higher hot deformation temperature leads to higher degree of recrystallization and larger average grain size, more γ-fiber textures and cube {100} <001> texture, but the rotated cube {100} <011> texture is stable. The recrystallized microstructure was also affected by the phase compositions. While the cube {100} <001> texture results in typical austenite recrystallization texture, {111} textures lead to typical ferrite rolling textures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electric component including custom metal grain orientation

An electrical device includes an electromagnetic component configured to generate a magnetic flux. The electromagnetic component includes a soft magnetically-conductive material configured to pass magnetic flux therethrough along a flux path. The soft magnetically-conductive material includes at least one grain oriented portion having metal grains that are oriented parallel with respect to the magnetic flux.

42 ENGINEERING↗
DOE OSTI2022

Electric component including custom metal grain orientation

An electrical device includes an electromagnetic component configured to generate a magnetic flux. The electromagnetic component includes a soft magnetically-conductive material configured to pass magnetic flux therethrough along a flux path. The soft magnetically-conductive material includes at least one grain oriented portion having metal grains that are oriented parallel with respect to the magnetic flux.

42 ENGINEERING↗
DOE OSTI2014

Extracting grain-orientation-dependent data from in situ time-of-flight neutron diffraction. I. Inverse pole figures

The problem of calculating the inverse pole figure (IPF) is analyzed from the perspective of the application of time-of flight neutron diffraction to in situ monitoring of the thermomechanical behavior of engineering materials. On the basis of a quasi-Monte Carlo (QMC) method, a consistent set of grain orientations is generated and used to compute the weighting factors for IPF normalization. The weighting factors are instrument dependent and were calculated for the engineering materials diffractometer VULCAN (Spallation Neutron Source, Oak Ridge National Laboratory). The QMC method is applied to face-centered cubic structures and can be easily extended to other crystallographic symmetries. Examples include 316LN stainless steel in situ loaded in tension at room temperature and an Al–2%Mg alloy, substantially deformed by cold rolling and in situ annealed up to 653 K.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1991

Grain orientation in high Tc superconductors by molten salt powder synthesis

The molten salt or the flux method is used to fabricate a grain oriented YBa2Cu3O(7-x) (123) superconductor. Here we suggest a two-stage approach in using the 'green phase', Y2BaCuO5 (211), as seed crystals in the formation of YBa2Cu3O(7-x). The process uses Y2BaCuO5 formed by molten salt synthesis. The Y2BaCuO5 phase was observed to be stable in water and in most of the salt systems. Salt processing can form a small quantity of anisotropic particles of Y2BaCuO5. This material can form the 123 phase when tape cast and sintered in the presence of the required levels of Ba and Cu.

Gopalakrishnan, Sudhakar↗
DOE OSTI2018

Effects of Laser-Cutting and Spark Erosion Techniques and Heat Treatment on the Magnetic Properties of Grain-Oriented Transformer Steels

Spark erosion and laser-cutting processes were examined in terms of their effects on the magnetic properties of grain-oriented electrical steels at working frequencies. The maximum permeability value in each case was considered a reference to determine the quantitative effect of cutting and eroding methods as well as the effects of heat treatment. To minimize the deterioration that appears after the piercing process is implemented, the specimens were subjected to heat treatment at the most appropriate temperature. The influence of stress-relief annealing could be observed throughout the domain refinement on the surface by using magneto-optical Kerr microscopy. Additionally, it was clearly seen that the domain contrast at the cut edge of the spark-eroded sample was more uniform than that provided by laser cutting upon applying a high AC-field amplitude.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1974

Grain orientation in lunar soil

Orientation of lunar soil particles in a vertical plane, as seen in the radiographs of core tubes was characterized by preparing orientation diagrams for the different stratigraphic units. Radiographs of double-core drive tubes 64001/64002, 60009/60010, and 60013/60014 were used. The orientation results reinforced the stratigraphic differences. Another source of fabric data was the laboratory-deposited sample 14163,148. The artificial deposition results showed that the grain arrangements were dependent upon the method of deposition. These results from lunar soil and other data from a crushed basalt simulant can be a basis for the inference that lunar soil grain orientation and properties are useful in interpreting lunar surface history.

Mahmood, A.↗
DOE OSTI2025

Controlling Preferred Grain Orientation in Vapor-Deposited Metal-Halide Perovskite Thin Films

Metal-halide perovskites are promising semiconductor materials for light-absorber layers in solar cells due to their optimized band gap, defect tolerance, and relative ease of synthesis. In this work, we demonstrate the viability of vapor transport deposition (VTD), a solvent-free processing method, to realize polycrystalline films of both lead iodide (PbI 2 ) and methylammonium lead iodide (MAPbI 3 ) perovskites showing preferential crystallographic orientation. Notable is the difference in perovskite film texturing observed for sequentially and co-deposited VTD films of MAPbI 3 , as well as the lack of strong preferential orientation in solution-processed MAPbI 3 films. While sequential deposition of the perovskite precursors PbI 2 and methylammonium iodide (MAI) leads to a MAPbI 3 film with a limited preferential grain orientation, co-deposited MAPbI 3 films mirror the orientation of excess PbI 2 present in the film. The latter is confirmed by the similar dependence of preferential orientation for PbI 2 and co-deposited MAPbI 3 on underlayer roughness, as well as the emergence of preferential orientation in MAPbI 3 only when excess PbI 2 is present. Both MAPbI 3 and PbI 2 films show a strong preferred lattice orientation on smooth substrates, while on rougher substrates, this orientation is disrupted. Furthermore, these results are interpreted as excess PbI 2 frustrating the diffusion of MAI in the film, which would otherwise disrupt the preferred orientation, pointing to a notable difference in lattice orientation arising from processing technique and conditions.

Deposition↗
DOE OSTI2015

Influence of grain orientation on the incipient oxidation behavior of Haynes 230 at 900 °C

Ni-based superalloy Haynes 230 is used in many applications such as very high temperature reactor (VHTR) or solid oxide fuel cells (SOFCs) where it is exposed to high temperature service environment. In order to improve the resistance for high temperature oxidation, the effect of crystallographic orientation on the early stage oxidation was investigated. It was demonstrated that different oxide thicknesses are formed on grains having different orientations. Comparison of electron backscatter diffraction (EBSD) orientation maps before and after oxidation at 900 °C indicates that grains near (111) orientation, especially with the deviation angle from <111> that is smaller than 20°, are more oxidation resistant than grains of other orientations. Correlation between the results of electron backscatter diffraction (EBSD) and atomic force microscopy (AFM) was used to compare the oxidation rate of grains having different crystallographic orientation. The oxidation rate was found to change with the crystallographic orientation as follows (111) < (110) < (100), also it was demonstrated that the oxidation rate changes are a nearly linear function of the angle of deviation from <111> direction. The morphology of surface oxide also depends on the orientation of grains. - Highlights: • Comparison of EBSD maps before and after oxidation allows to investigate the effect of orientation on oxidation in a more direct way; • Effect of crystallographic orientation on oxidation behavior of alloy 230 is studied by combination of EBSD and AFM; • Different thickness of oxide is formed on grain with different orientation and dependence of anisotropic oxidation behavior is discussed; • The morphology of grains is also orientation dependence.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Comparison of high temperature, high frequency core loss and dynamic B-H loops of a 2V-49Fe-49Co and a grain oriented 3Si-Fe alloy

The design of power magnetic components such as transformers, inductors, motors, and generators, requires specific knowledge about the magnetic and electrical characteristics of the magnetic materials used in these components. Limited experimental data exists that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency over a wide flux density range. An experimental investigation of a 2V-49-Fe-49Co (Supermendur) and a grain oriented 3 Si-Fe (Magnesil) alloy was conducted over the temperature range of 23 to 300 C and frequency range of 0.1 to 10 kHz. The effects of temperature, frequency, and maximum flux density on the core loss and dynamic B-H loops for sinusoidal voltage excitation conditions are examined for each of these materials. A comparison of the core loss of these two materials is also made over the temperature and frequency range investigated.

Wieserman, W. R.↗
NASA NTRS1992

Comparison of high temperature, high frequency core loss and dynamic B-H loops of a 2V-49Fe-49Co and a grain oriented 3Si-Fe alloy

The design of power magnetic components such as transformers, inductors, motors, and generators, requires specific knowledge about the magnetic and electrical characteristics of the magnetic materials used in these components. Limited experimental data exists that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency over a wide flux density range. An experimental investigation of a 2V-49-Fe-49Co (Supermendur) and a grain oriented 3 Si-Fe (Magnesil) alloy was conducted over the temperature range of 23 to 300 C and frequency range of 0.1 to 10 kHz. The effects of temperature, frequency, and maximum flux density on the core loss and dynamic B-H loops for sinusoidal voltage excitation conditions are examined for each of these materials. A comparison of the core loss of these two materials is also made over the temperature and frequency range investigated.

Wieserman, W. R.↗