Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geologic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Deep Borehole Disposal Research: Geological Data Evaluation Alternative Waste Forms and Borehole Seals

This report documents deep borehole disposal research during FY2014, as directed by U.S. Department of Energy (DOE) Used Fuel Disposition (UFD) Campaign. These research efforts are principally directed at advancing the deep borehole disposal project to the implementation of a full-scale Research, Development, and Demonstration (RD&D) project. Activities of particular relevance to this goal include evaluation of guidelines for selection of a deep borehole field test site, analyses of deep borehole disposal of alternative waste forms, and technical planning for borehole seals research.

Arnold, Bill W.↗

Identification of a precambrian rift through Missouri by digital image processing of geophysical and geological data

A newly discovered feature in the midcontinent - a gravity low that begins at a break in the midcontinent gravity high in SE Nebraska, extends across Missouri in a NW-SE direction, and intersects the Mississippi Valley graben to form the Pascola arch - is discussed. The anomaly varies from 120 to 160 km in width, extends approximately 700 km, and is best expressed in southern Missouri, where it has a Bouguer amplitude of about -34 mGal. It is noted that the magnitude of the anomaly cannot be explained on the basis of a thickened section of Paleozoic sedimentary rock. The gravity data and the sparse seismic refraction data for the region are found to be consistent with an increased crustal thickness beneath the gravity low. It is thought that the gravity anomaly is probably the present expression of a failed arm of a rifting event, perhaps one associated with the spreading that led to or preceded formation of the granite and rhyolite terrain of southern Missouri.

Guinness, E. A.↗

LANDSAT 4 investigations of thematic mapper and multispectral scanner applications

Initial data screening, data handling and program testing were completed on the four-band Detroit scene and the seven-band northeast Arkansas scene. Data were received in early December for one primary eastern test site (Washington, D.C.) and one secondary eastern test site (Allegheny National Forest). A comprehensive digital data base was built for a portion of the Black Hills test site and is composed of historic LANDSAT MSS data; elevation, slope, and aspect data; land cover data; geologic data; thematic mapper simulator data; and digitized high altitude aircraft data. The thematic mapper and multispectral scanner data of the Washington area were resampled at 25 and 50 meters respectively, with map projection to UTM grid.

Lauer, D. T.↗

Characterization of Venera 15/16 Geologic Units from Pioneer Venus Reflectivity and Roughness Data

Geologic units have been defined for the surface of Venus from Venera 15/16 image data. A characterization of these geologic units is carried out using information on surface properties derived from Pioneer Venus (PV) reflectivity and rms slope data. The geologic context provided by Venera 15/16 units allows additional, more specific interpretations of surface radar properties to be made. Characterization of Venera units results in the definition of four groups of Venera units: (1) smooth rocky units, 2) rough rocky units, (3) rough high dielectric units, and (4) diffusely scattering units. On the basis of correlations of surface morphology to spatial and statistical distributions in rms slope and reflectivity data, we test models for the origin of the surface properties of some units. We conclude that plains and tectonic units can be contrasted in terms of the average roughness of the surface and that tectonic deformation appears to roughen the surface at 0.5- to 10-m and 5- to 50-cm scales. This tectonic weathering process appears to dominate the erosional regime of Venus. Unlike Earth or Mars, production and transport of soils dominates only a small portion (less than or equal to 5%) of the surface. Some of the Venera units display distinctive spatial and statistical distributions of PV radar data. In particular, apparent low reflectivity in the tesserae appears to be caused by small (5-50 cm) rock fragments on the surface which cause diffuse scattering at Pioneer Venus wavelengths. Analysis of models for the formation of these fragments suggests that they are due to the pervasive deformation undergone by the tesserae. Finally, aspects of this study have been used to extend results of Venera image data analysis southward of 30 deg. N lat, resulting in it prediction of the distribution of tessera. Such results can aid in Magellan investigations.

Bindschadler, D. L.↗

Geologic Map and Cross Sections of the McGinness Hills Geothermal Area - GIS Data

Geologic map data in shapefile format that includes faults, unit contacts, unit polygons, attitudes of strata and faults, and surficial geothermal features. 5 cross-sections in Adobe Illustrator format. Comprehensive catalogue of drill-hole data in spreadsheet, shapefile, and Geosoft database formats. Includes XYZ locations of well heads, year drilled, type of well, operator, total depths, well path data (deviations), lithology logs, and temperature data. 3D model constructed with EarthVision using geologic map data, cross-sections, drill-hole data, and geophysics.

15 GEOTHERMAL ENERGY↗

Fallon FORGE: Well Data, Geophysical Data, and Geologic Maps

The data is associated to the Fallon FORGE project and includes mudlogs for all wells used to characterize the subsurface, as wells as gravity, magnetotelluric, earthquake seismicity, and temperature data from the Navy GPO and Ormat. Also included are geologic maps from the USGS and Nevada Bureau of Mines and Geology for the Fallon, NV area.

13-36↗

Efficient Data-Driven Geologic Feature Characterization from Pre-stack Seismic Measurements using Randomized Machine-Learning Algorithm

Conventional seismic techniques for detecting the subsurface geologic features are challenged by limited data coverage, computational inefficiency and subjective human factors. We developed a novel data-driven geological feature characterization approach based on pre-stack seismic measurements. Our characterization method employs an efficient and accurate machine learning method to extract useful subsurface geologic features automatically. Specifically, we use kernel ridge regression to account for the nonlinear relationship between seismic data and geological features. We moreover employ kernel tricks to avoid the explicit nonlinear mapping and infinite dimension of feature space. Yet, the conventional kernel ridge regression can be computationally prohibitive because of the large volume of seismic measurements. We employ a data reduction technique in combination with the conventional kernel ridge regression method to improve the computational efficiency and reduce memory usage. In particular, we utilize a randomized numerical linear algebra technique, named Nyström method, to effectively reduce the dimensionality of the feature space without compromising the information content required for accurate characterization. We provide thorough computational cost analysis to show the efficiency of our new geological feature characterization methods. We validate the performance of our method in characterizing geologic fault zones because faults play an important role in various subsurface applications. Our numerical examples demonstrate that our new characterization method significantly improves the computational efficiency while maintaining comparable accuracy. Interestingly, we demonstrate that our approach yields a speedup ratio on the order of ~102 to ~103 in a multicore computational environment.

58 GEOSCIENCES↗

Antarctic ice sheet model comparison with uncurated geological constraints shows that higher spatial resolution improves deglacial reconstructions

Accurately reconstructing past changes to the shape and volume of the Antarctic ice sheet relies on the use of physically based and thus internally consistent ice sheet modeling, benchmarked against spatially limited geologic data. The challenge in model benchmarking against geologic data is diagnosing whether model-data misfits are the result of an inadequate model, inherently noisy or biased geologic data, and/or incorrect association between modeled quantities and geologic observations. In this work we address this challenge by (i) the development and use of a new model-data evaluation framework applied to an uncurated data set of geologic constraints, and (ii) nested high-spatial-resolution modeling designed to test the hypothesis that model resolution is an important limitation in matching geologic data. While previous approaches to model benchmarking employed highly curated datasets, our approach applies an automated screening and quality control algorithm to an uncurated public dataset of geochronological observations (specifically, cosmogenic-nuclide exposure-age measurements from glacial deposits in ice-free areas). This optimizes data utilization by including more geological constraints, reduces potential interpretive bias, and allows unsupervised assimilation of new data as they are collected. We also incorporate a nested model framework in which high-resolution domains are downscaled from a continent-wide ice sheet model. We highlight the application of this framework by applying these methods to a small ensemble of deglacial ice-sheet model simulations, and demonstrate that the nested approach improves the ability of model simulations to match exposure age data collected from areas of complex topography and ice flow. We develop a range of diagnostic model-data comparison metrics to provide more insight into model performance than possible from a single-valued misfit statistic, showing that different metrics capture different aspects of ice sheet deflation.

Geosciences↗

Integrated imaging experiment with C-SAR and other geological image data across the Nelson Front, Northern Manitoba

This paper presents preliminary results from the integration of geophysical and geological data sets using Bayesian statistical analysis with the purpose of mapping the Churchill-Superior Boundary zone. In the Wabowden area the contribution of each rock type to the aeromagnetic anomaly is judged by convolving the aeromagnetic anomaly value with the average magnetic susceptibility. The 'a posteriori' probabilities of significant patterns in the new data are then computed. The highest 'a posteriori' probability occurs along a narrow corridor whose trend coincides remarkably with the location of the Churchill-Superior Boundary Zone. In the Wekusko Lake area, C-SAR and TM data were integrated using an image analysis system. Here the emphasis is on mapping of geological structures.

Rao, G. S. K.↗

Photogeological, geophysical, and geochemical data on the east side of the moon

Correlations between Apollo orbital data and geologic data for eight map provinces are reported for a region centered on the east limb of the moon (50 deg N to 50 deg S and 50 deg E to 140 deg E). The appearance of the provinces is described, and the basins in or near the region are assigned relative ages. The western (nearside) part of the region averages about 3 km lower in elevation than the eastern (farside) part, according to laser altimeter measurements which are used to make geologic cross sections. Gravity data correlate with most geologic provinces and the surface profiles made by the laser altimeter and lunar sounder. The distribution of concentration ratios of Al/Si and Mg/Si as well as the distribution of relatively low natural radioactivity are considered.

El-Baz, F.↗

West Flank Coso FORGE: ArcGIS Data for Geologic Model

Archive of ArcGIS data from the West Flank FORGE site located in Coso, California. Archive contains the following eight shapefiles: Polygon of the 3D geologic model (WestFlank3DGeologicModelExtent) Polylines of the traces 3D modeled faults (WestFlank3DModeledFaultTraces) Polylines of the fault traces from Duffield and Bacon, 1980 (WestFlankFaultsfromDuffieldandBacon) Polygon of the West Flank FORGE site (WestFlankFORGEsite) Polylines of the traces of the geologic cross-sections (cross-sections in a separate archive in the GDR) (WestFlankGeologicCrossSections) Polylines of the traces of the seismic reflection profiles through and adjacent to the West Flank site (seismic reflection profiles in a separate archive in the GDR) (WestFlankSiesmicReflectionProfiles) Points of the well collars in and around the West Flank site (WestFlankWellCollars) Polylines of the surface expression of the West Flank well paths (WestFlankWellPaths)

15 GEOTHERMAL ENERGY↗

Multispectral, thermal infrared satellite data for geologic applications

The value of multispectral thermal infrared satellite data for geologic mapping was assessed, applying the principal component and canonical analysis techniques to the images of the central part of the Arabian Peninsula (a 200 x 300 km area). Low resolution thermal infrared (TIR) data from the Nimbus 5 Surface Composition Mapping Radiometer (SCMR) and the NOAA-7 Advanced Very High Resolution Radiometer (AVHRR) were used. Color images included an 8.8 micrometer (SCMR) and 3.7 and 10.8 micrometer (AVHRR-night) data, ratioed AVHRR day/night TIR data, ratioed AVHRR reflected radiation data, and transformed 8- and 10-band TIR plus reflected radiation data. The results clearly demonstrated the potential geologic value of multispectral TIR data. Igneous and metamorphic units could be separated as a class (although not from each other except for young calc-alkaline granites). Some previously unmapped extensions of mapped faults below thick sedimentary units could be delineated. No single enhancement technique displayed all the potential information, implying that they should be used together.

Blodget, H. W.↗