Search NASA⌕ Search

SEARCH · Search NASA

Results for “Group Contribution Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Particle-Phase Chemistry of Secondary Organic Material: Modeled Compared to Measured O:C and H:C Elemental Ratios Provide Constraints

Chemical mechanisms for the production of secondary organic material (SOM) are developed in focused laboratory studies but widely used in the complex modeling context of the atmosphere. Given this extrapolation, a stringent testing of the mechanisms is important. In addition to particle mass yield as a typical standard for model-measurement comparison, particle composition expressed as O:C and H:C elemental ratios can serve as a higher dimensional constraint. A paradigm for doing so is developed herein for SOM production from a C5 C10 C15 terpene sequence, namely isoprene, R-pinene, and β-caryopyhllene. The model MCM-SIMPOL is introduced based on the Master Chemical Mechanism (MCM v3.2) and a group contribution method for vapor pressures (SIMPOL). The O:C and H:C ratios of the SOM are measured using an Aerosol Mass Spectrometer (AMS). Detailed SOM-specific AMS calibrations for the organic contribution to the H2Oþ and COþ ions indicate that published O:C and H:C ratios for SOM are systematically too low. Overall, the measurement-model gap was small for particle mass yield but significant for particle-average elemental composition. The implication is that a key chemical pathway is missing from the chemical mechanism. The data can be explained by the particle-phase homolytic decomposition of organic hydroperoxides and subsequent alkyl-radical-promoted oligomerization.

54 ENVIRONMENTAL SCIENCES↗

Effect of Isomeric Structures of Branched Cyclic Hydrocarbons on Densities and Equation of State Predictions at Elevated Temperatures and Pressures

The cis and trans conformation of a branched cyclic hydrocarbon affects the packing and, hence, the density, exhibited by that compound. Reported here are density data for branched cyclohexane (C6) compounds including methylcyclohexane, ethylcyclohexane (ethylcC6), cis-1,2-dimethylcyclohexane (cis-1,2), cis-1,4-dimethylcyclohexane (cis-1,4), and trans-1,4-dimethylcyclohexane (trans-1,4) determined at temperatures up to 525 K and pressures up to 275 MPa. Of the four branched C6 isomers, cis-1,2 exhibits the largest densities and the smallest densities are exhibited by trans-1,4. The densities are modeled with the Peng–Robinson (PR) equation of state (EoS), the high-temperature, high-pressure, volume-translated (HTHP VT) PREoS, and the perturbed chain, statistical associating fluid theory (PC-SAFT) EoS. Model calculations highlight the capability of these equations to account for the different densities observed for the four isomers investigated in this study. The HTHP VT-PREoS provides modest improvements over the PREoS, but neither cubic EoS is capable of accounting for the effect of isomer structural differences on the observed densities. The PC-SAFT EoS, with pure component parameters from the literature or from a group contribution method, provides improved density predictions relative to those obtained with the PREoS or HTHP VT-PREoS. However, the PC-SAFT EoS, with either set of parameters, also cannot fully account for the effect of the C6 isomer structure on the resultant density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphologies of ABC Triblock Terpolymer Melts Containing Poly(Cyclohexadiene): Effects of Conformational Asymmetry

We have synthesized linear ABC triblock terpolymers containing poly(1,3-cyclohexadiene), PCHD, as an end block and characterized their morphologies in the melt. Specifically, we have studied terpolymers containing polystyrene (PS), polybutadiene (PB), and polyisoprene (PI) as the other blocks. Systematically varying the ratio of 1,2- /1,4-microstructures of poly(1,3-cyclohexadiene), we have studied the effects of conformational asymmetry among the three blocks on the morphologies using transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and self-consistent field theory (SCFT) performed with PolySwift++. Our work reveals that the triblock terpolymer melts containing a high percentage of 1,2-microstructures in the PCHD block are disordered at 110 °C for all the samples, independent of sequence and volume fraction of the blocks. In contrast, the triblock terpolymer melts containing a high percentage of 1,4-microstructure form regular morphologies known from the literature. The accuracy of the SCFT calculations depends on calculating the χ parameters that quantify the repulsive interactions between different monomers. Simulations using χ values obtained from solubility parameters and group contribution methods are unable to reproduce the morphologies as seen in the experiments. However, SCFT calculations accounting for the enhancement of the χ parameter with an increase in the conformational asymmetry lead to an excellent agreement between theory and experiments. Lastly, these results highlight the importance of conformational asymmetry in tuning the χ parameter and, in turn, morphologies in block copolymers.

36 MATERIALS SCIENCE↗

FuelLib (Fuel Library) [SWR-25-26]

FuelLib is a library that utilizes the group contribution method (GCM) for calculating thermodynamic properties of hydro-carbon jet fuels. FuelLib utilizes the tables and functions of the GCM as proposed by Constantinou and Gani (1994) and Constantinou, Gani and O'Connel (1995), with additional physical properties discussed in Govindaraju & Ihme (2016). The code is based on Pavan B. Govindaraju's Matlab implementation of the GCM, and has been expanded to include additional thermodynamic properties and mixture properties. The fuel library contains gas chromatography (GC x GC) data for a variety of fuels ranging from simple single component fuels to complex jet fuels. The GC x GC data for POSF jet fuels comes from Edwards (2020).

Montgomery, David [National Renewable Energy Labor↗

i Bsu1103: a new genome-scale metabolic model of Bacillus subtilis based on SEED annotations

Background: Bacillus subtilis is an organism of interest because of its extensive industrial applications, its similarity to pathogenic organisms, and its role as the model organism for Grampositive, sporulating bacteria. In this work, we introduce a new genome-scale metabolic model of B. subtilis 168 called iBsu1103. This new model is based on the annotated B. subtilis 168 genome generated by the SEED, one of the most up-to-date and accurate annotations of B. subtilis 168 available. Results: The iBsu1103 model includes 1,437 reactions associated with 1,103 genes, making it the most complete model of B. subtilis available. The model also includes Gibbs free energy change (Δ r G°) values for 1,403 (97%) of the model reactions estimated by using the group contribution method. These data were used with an improved reaction reversibility prediction method to identify 653 (45%) irreversible reactions in the model. The model was validated against an experimental dataset consisting of 1,500 distinct conditions and was optimized by using an improved model optimization method to increase model accuracy from 89.7% to 93.1%. Conclusions: Basing the iBsu1103 model on the annotations generated by the SEED significantly improved the model completeness and accuracy compared with the most recent previously published model. The enhanced accuracy of the iBsu1103 model also demonstrates the efficacy of the improved reaction directionality prediction method in accurately identifying irreversible reactions in the B. subtilis metabolism. The proposed improved model optimization methodology was also demonstrated to be effective in minimally adjusting model content to improve model accuracy.

59 BASIC BIOLOGICAL SCIENCES↗

Polymer genome–based prediction of gas permeabilities in polymers

Abstract Predicting gas permeabilities of polymers a priori is a long-standing challenge within the membrane research community that has important applications for membrane process design and ultimately widespread adoption of membrane technology. From early attempts based on free volume and cohesive energy to more recent group contribution methods, the ability to predict membrane permeability has improved in terms of accuracy. However, these models usually stay “within the paper”, i.e. limited model details are provided to the wider community such that adoption of these predictive platforms is limited. In this work, we combined an advanced polymer chemical structure fingerprinting method with a large experimental database of gas permeabilities to provide unprecedented prediction precision over a large range of polymer classes. No prior knowledge of the polymer is needed for the prediction other than the repeating unit chemical formula. In addition, we have incorporated this model into the existing Polymer Genome project to make it open to the membrane research community.

Polymer Science↗

Experimental determination of the solubility constant of kurnakovite, MgB3O3(OH)5·5H2O

In this study, I present experimental results on the equilibrium between boracite [Mg 3 B 7 O 13 C1(cr)] and kurnakovite [chemical formula, Mg 2 B 6 O 11 ·15H 2 O(cr); structural formula, MgB 3 O 3 (OH) 5 ·5H 2 O(cr)] at 22.5 ± 0.5 °C from a long-term experiment up to 1629 days, approaching equilibrium from the direction of supersaturation, Mg 3 B 7 O 13 C1(cr) + H + + 2B(OH)$^-_4$ + 18H 2 O(1) ⇌ 3MgB 3 O 3 (OH) 5 ·5H 2 O(cr) + C1 - . Based on solubility measurements, the 10-based logarithm of the equilibrium constant for the above reaction at 25 °C is determined to be 12.83 ± 0.08 (2σ). Based on the equilibrium constant for dissolution of boracite, Mg 3 B 7 O 13 C1(cr) + 15H 2 O(1) = 3Mg 2+ + 7B(OH)$^-_4$ + C1 - + 2H + at 25 °C measured previously (Xiong et al. 2018) and that for the reaction between boracite and kurnakovite determined here, the equilibrium constant for dissolution of kurnakovite, MgB 3 O 3 (OH) 5 ·5H 2 O(cr) = Mg 2+ + 3B(OH)$^-_4$ + H + + H 2 O(1) is derived as -14.11 ± 0.40 (2σ). Using the equilibrium constant for dissolution of kurnakovite obtained in this study and the experimental enthalpy of formation for kurnakovite from the literature, a set of thermodynamic properties for kurnakovite at 25 °C and 1 bar is recommended as follows: Δ H $^0_f$ = -4813.24 ± 4.92 kJ/mol, Δ G$^0_f$ = -4232.0 ± 2.3 kJ/mol, and S 0 = 414.3 ± 0.9 J/(mol·K). Among them, the Gibbs energy of formation is based on the equilibrium constant for kurnakovite determined in this study; the enthalpy of formation is from the literature (Li et al. 1997), and the standard entropy is calculated internally with the Gibbs-Helmholtz equation in this work. The thermodynamic properties of kurnakovite estimated using the group contribution method for borate minerals based on the sums of contributions from the cations, borate polyanions, and structural water to the thermodynamic properties from the literature (Li et al. 2000) are consistent, within their uncertainties, with the values listed above. Since kurnakovite usually forms in salt lakes rich in sulfate, studying the interactions of borate with sulfate is important to modeling kurnakovite in salt lakes. Finally, for this purpose, I have re-calibrated our previous model (Xiong et al. 2013) describing the interactions of borate with sulfate based on the new solubility data for borax in Na 2 SO 4 solutions presented here.

36 MATERIALS SCIENCE↗

Measuring and predicting sooting tendencies of oxygenates, alkanes, alkenes, cycloalkanes, and aromatics on a unified scale

Databases of sooting indices, based on measuring some aspect of sooting behavior in a standardized combustion environment, are useful in providing information on the comparative sooting tendencies of different fuels or pure compounds. However, newer biofuels have varied chemical structures including both aromatic and oxygenated functional groups, which expands the chemical space of relevant compounds. In this work, we propose a unified sooting tendency database for pure compounds, including both regular and oxygenated hydrocarbons, which is based on combining two disparate databases of yield-based sooting tendency measurements in the literature. Unification of the different databases was made possible by leveraging the greater dynamic range of the color ratio pyrometry soot diagnostic. This unified database contains a substantial number of pure compounds (≥ 400 total) from multiple categories of hydrocarbons important in modern fuels and establishes the sooting tendencies of aromatic and oxygenated hydrocarbons on the same numeric scale for the first time. Then, using this unified sooting tendency database, we have developed a predictive model for sooting behavior applicable to a broad range of hydrocarbons and oxygenated hydrocarbons. The model decomposes each compound into single-carbon fragments and assigns a sooting tendency contribution to each fragment based on regression against the unified database. The model’s predictive accuracy (as demonstrated by leave-one-out cross-validation) is comparable to a previously developed, more detailed predictive model. The fitted model provides insight into the effects of chemical structure on soot formation, and cases where its predictions fail reveal the presence of more complicated kinetic sooting mechanisms. Our work will therefore enable the rational design of low-sooting fuel blends from a wide range of feedstocks and chemical functionalities.

09 BIOMASS FUELS↗

dGPredictor: Automated fragmentation method for metabolic reaction free energy prediction and de novo pathway design

Group contribution (GC) methods are conventionally used in thermodynamics analysis of metabolic pathways to estimate the standard Gibbs energy change ( Δ r G ′ o ) of enzymatic reactions from limited experimental measurements. However, these methods are limited by their dependence on manually curated groups and inability to capture stereochemical information, leading to low reaction coverage. Herein, we introduce an automated molecular fingerprint-based thermodynamic analysis tool called dGPredictor that enables the consideration of stereochemistry within metabolite structures and thus increases reaction coverage. dGPredictor has comparable prediction accuracy compared to existing GC methods and can capture Gibbs energy changes for isomerase and transferase reactions, which exhibit no overall group changes. We also demonstrate dGPredictor’s ability to predict the Gibbs energy change for novel reactions and seamless integration within de novo metabolic pathway design tools such as novoStoic for safeguarding against the inclusion of reaction steps with infeasible directionalities. To facilitate easy access to dGPredictor, we developed a graphical user interface to predict the standard Gibbs energy change for reactions at various pH and ionic strengths. The tool allows customized user input of known metabolites as KEGG IDs and novel metabolites as InChI strings ( https://github.com/maranasgroup/dGPredictor ).

59 BASIC BIOLOGICAL SCIENCES↗

Revisiting group contribution theory for estimating fractional free volume of microporous polymer membranes

Fractional free volume (FFV) is a commonly used metric for the development of structure–property relationships for polymer membranes. The most common method to calculate FFV uses Bondi's group contribution method, first introduced in 1964. While updated in 1997, there has not been a significant compilation of new structural motifs since the advent of linear microporous polymers. Here, in this study, we critically examined the assumptions in Bondi's original method and provide four recommendations to streamline and improve the accuracy of calculating van der Waals volume (V W ) for any group. Using these recommendations, we created an updated list of (V W ) values for structural groups commonly present in microporous polymers. The (V W ) and FFV values were then calculated for a database of 123 microporous and high free volume polymers from the literature, showing an average 7% decrease in (V W ) and corresponding increase in FFV by a factor of 24% when compared to prior group contribution correlations in the literature. The significant apparent increase in estimated FFV provides a new perspective to understand and interpret the role of free volume on the separation performance of linear microporous polymers. Additionally, standardization of the group contribution method allows for the direct comparison of FFV values across studies.

42 ENGINEERING↗

A general predictive methodology for fuel-mixture properties up to supercritical conditions

A predictive thermodynamic model is utilized for the calculation of fuel properties of oxymethylene dimethyl ethers (OME 3–4 ), surrogates for gasoline, diesel and aviation fuel, as well as alcohol blends with gasoline and diesel. The alcohols used for these blends are methanol, ethanol, propanol, butanol and pentanol; their mixing ratio ranges from 10 to 50% by volume. The model is based on the Perturbed-Chain Statistical Association Fluid Theory (PC-SAFT) equation of state (EoS) and Vapor Liquid Equilibrium (VLE) calculations at constant temperature, density and composition. The model includes the association term, with the assumption of two association sites (2B scheme), to enable the modeling of alcohols. The pure-component parameters are estimated based on the Group Contribution (GC) method of various sources, as well as a parametrization model specifically designed for the case of OME 3–4 . The results of the computational model for the density, vapor pressure and distillation curves at various conditions, including high-pressure, high-temperature (HPHT), are compared to experimental and computational data available in the literature. In the cases where no measurements are available for the surrogates, experimental data for the corresponding target fuel are used, taking into consideration the inherent deviation in properties between real and surrogate fuel. Overall, the results are in good agreement with the data from the literature, with the average deviation not exceeding 12% for temperature (Kelvin) on the distillation curves, 10% for density and 46% for vapor pressure and the general trend being captured successfully. The use of different pure component parameter estimation techniques can further improve the prediction quality in the cases of OME3–4 and the aviation fuel surrogate, especially for the vapor pressure, leading to an average deviation lower than 18%. These results demonstrate the predictive capabilities of the model, which extend to a wide range of fuel types and pressure/temperature conditions. Through this investigation, the present work aims to establish the limits of applicability of this thermodynamic property prediction methodology.

33 ADVANCED PROPULSION SYSTEMS↗

Hygroscopicity of organic compounds as a function of carbon chain length, carboxyl, hydroperoxy, and carbonyl functional groups

The albedo and microphysical properties of clouds are controlled in part by the hygroscopicity of particles serving as cloud condensation nuclei (CCN). Hygroscopicity of complex organic mixtures in the atmosphere varies widely and remains challenging to predict. Here we present new measurements characterizing the CCN activity of pure compounds in which carbon chain length and the number of hydroperoxy, carboxyl, and carbonyl functional groups were systematically varied to establish the contributions of these groups to organic aerosol apparent hygroscopicity. Apparent hygroscopicity decreased with carbon chain length and increased with polar functional groups in the order carboxyl > hydroperoxy > carbonyl. Activation diameters at different supersaturations deviated from the -3/2 slope in log-log space predicted by Köhler theory, suggesting that water solubility limits CCN activity of particles composed of weakly functionalized organic compounds. Results are compared to a functional group contribution model that predicts CCN activity of organic compounds. The model performed well for most compounds but under-predicted the CCN activity of hydroperoxy groups. New best-fit hydroperoxy group/water interaction parameters were derived from the available CCN data. Lastly, these results may help improve estimates of the CCN activity of ambient organic aerosols from composition data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Comprehensive Set of High-Quality Point Charges for Simulations of Metal–Organic Frameworks

Most classical simulations of metal-organic frameworks model electrostatic interactions using point charges on each atom in the structure. We report atomic point charges derived from periodic DFT electronic structure calculations for over 2,000 unique experimentally synthesized MOFs. These charges are publicly available as a supplement to the Computation-Ready Experimental MOF database. These DFT derived atomic point charges are compared to semi-empirical group contribution and charge equilibration methods for assigning charges. As an example of using these charges, we examined each MOF for usefulness in the adsorptive removal of tert-butyl mercaptan (TBM) from natural gas. Monte Carlo simulations revealed many candidate MOF structures with high selectivity for TBM over CH 4 and high TBM capacity. As a result, we anticipate that this public dataset of atomic point charges for MOFs will facilitate high-throughput screening for a wide variety applications where electrostatic interactions must be considered.

36 MATERIALS SCIENCE↗

Three-loop calculations in non-abelian gauge theories

A detailed description of the method for analytical evaluation of the three-loop contributions to renormalization group functions is presented. This method is employed to calculate the charge renormalization function and anomalous dimensions for non-Abelian gauge theories with fermions in the three-loop approximation. A three-loop expression for the effective charge of QCD is given. Charge renormalization effects in the SU (4)-supersymmetric gauge model is shown to vanish at this level. A complete list of required formulas is given in Appendix. The above-mentioned results of three-loop calculations were published by the present authors (with A.Yu. Zharkov and L.V. Avdeev) in 1980 in Physics Letters B. The present text, which treats the subject in more details and contains a lot of calculational techniques, was also published in 1980 as the JINR Communication E2-80-483.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The interaction between cations and anionic groups inducing SHG enhancement in a series of apatite-like crystals: A first-principles study

It is an interesting topic to reveal the origin of the SHG intensity enhancement after substitution from alkali and alkali-earth metal atoms to cadmium in a series of apatite-like borates KSr{sub 4}(BO{sub 3}){sub 3}, Ca{sub 5}(BO{sub 3}){sub 3}F, Cd{sub 5}(BO{sub 3}){sub 3}F. Combined with the first-principles method, SHG-density method and real-space atom-cutting method, the electronic structure, the optical properties and the contribution of respective ion and ion groups have been investigated. Second harmonic generation (SHG) responses are mainly attributed to BO{sub 3} groups with π conjugated configuration and their alignment framework. The contributions of A site are more important in CaBOF and CdBOF compounds than in KSrBO. It is also demonstrated that the strong covalent interactions between the boron–oxygen groups and the cadmium atoms contribute the enhancement of SHG responses after substitution from alkali and alkali-earth metal atoms. - graphical abstract: Combined with the first-principles method, SHG-density method and real-space atom-cutting method, the enhancement of SHG response are attributed to the interaction between cadmium and BO{sub 3} groups. - Highlights: • SHG response on a series of apatite-like borates was studied by a SHG-density method. • SHG responses are mainly attributed to BO{sub 3} groups and their alignment framework. • The contributions of A site are more important in CaBOF and CdBOF than in KSrBO. • Covalent interaction between BO and Cd is responsible for SHG of CdBOF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Results for Phase I of the IAEA Coordinated Research Program on HTGR Uncertainties

The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied. High Temperature Gas-cooled Reactors (HTGR) has its own peculiarities, coated particle design, large graphite quantities, different materials and high temperatures that also require other simulation requirements. The IAEA has therefore launched a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modeling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the HTR-PM (INET, China). This report summarizes the contributions of the HTGR Methods Simulation group at Idaho National Laboratory (INL) up to this point of the CRP. The activities at INL have been focused so far on creating the problem specifications for the prismatic design, as well as providing reference solutions for the exercises defined for Phase I. An overview is provided of the HTGR UAM objectives and scope, and the detailed specifications for Exercises I-1, I-2, I-3 and I-4 are also included here for completeness. The main focus of the report is the compilation and discussion of reference results for Phase I (i.e. for input parameters at their nominal or best-estimate values), which is defined as the first step of the uncertainty quantification process. These reference results can be used by other CRP participants for comparison with other codes or their own reference results. The status on the Monte Carlo modeling of the experimental VHTRC facility is also discussed. Reference results were obtained for the neutronics stand-alone cases (Ex. I-1 and Ex. I-2) using the (relatively new) Monte Carlo code Serpent, and comparisons were performed with the more established Monte Carlo codes MCNP and KENO-VI. For the thermal-fluids stand-alone cases (Ex. I-3 and I-4) the commercial CFD code CFX was utilized to obtain reference results that can be compared with lower fidelity tools.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Description of Differential Cross Sections for {sup 63}Cu + p Nuclear Reactions Induced by High-Energy Cosmic-Ray Protons

The results of calculation of {sup 63}Cu + p differential cross sections at incident-proton energies between 10 and 200 MeV and a comparative analysis of these results are presented as a continuation of the earlier work of our group on developing methods for calculating the contribution of nuclear reactions to radiative effects arising in the onboard spacecraft electronics under the action of high-energy cosmic-ray protons on {sup 63}Cu nuclei (generation of single-event upsets) and as a supplement to the earlier calculations performed on the basis of the TАLYS code in order to determine elastic- and inelastic-scattering cross sections and charge, mass, and energy distributions of recoil nuclei (heavy products of the {sup 63}Cu + p nuclear reaction). The influence of various mechanisms of the angular distributions of particles emitted in the {sup 63}Cu + p nuclear reaction is also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Do Intermediate Radiation Doses Contribute to Late Rectal Toxicity? An Analysis of Data From Radiation Therapy Oncology Group Protocol 94-06

Purpose: To investigate whether the volumes of rectum exposed to intermediate doses, from 30 to 50 Gy, contribute to the risk of Grade {>=}2 late rectal toxicity among patients with prostate cancer receiving radiotherapy. Methods and Materials: Data from 1009 patients treated on Radiation Therapy Oncology Group protocol 94-06 were analyzed using three approaches. First, the contribution of intermediate doses to a previously published fit of the Lyman-Kutcher-Burman (LKB) normal tissue complication probability (NTCP) model was determined. Next, the extent to which intermediate doses provide additional risk information, after taking the LKB model into account, was investigated. Third, the proportion of rectum receiving doses higher than a threshold, VDose, was computed for doses ranging from 5 to 85 Gy, and a multivariate Cox proportional hazards model was used to determine which of these parameters were significantly associated with time to Grade {>=}2 late rectal toxicity. Results: Doses <60 Gy had no detectable impact on the fit of the LKB model, as expected on the basis of the small estimate of the volume parameter (n = 0.077). Furthermore, there was no detectable difference in late rectal toxicity among cohorts with similar risk estimates from the LKB model but with different volumes of rectum exposed to intermediate doses. The multivariate Cox proportional hazards model selected V75 as the only value of VDose significantly associated with late rectal toxicity. Conclusions: There is no evidence from these data that intermediate doses influence the risk of Grade {>=}2 late rectal toxicity. Instead, the critical doses for this endpoint seem to be {>=}75 Gy. It is hypothesized that cases of Grade {>=}2 late rectal toxicity occurring among patients with V75 less than approximately 12% may be due to a 'background' level of risk, likely due mainly to biological factors.

62 RADIOLOGY AND NUCLEAR MEDICINE↗