Search NASA⌕ Search

SEARCH · Search NASA

Results for “HCP metals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Hydrogen and Silicon Effects on Hexagonal Close Packed Fe Alloys at High Pressures: Implications for the Composition of Earth's Inner Core

Hexagonal close-packed (hcp) structured Fe-Ni alloy is believed to be the dominant phase in the Earth's inner core. This phase is expected to contain 4%–5% light elements, such as Si and H. While the effects of individual light element candidates on the equation of state (EoS) of the hcp Fe metal have been studied, their combined effects remain largely unexplored. Here, in this study, we report the equations of state for two hcp-structured Fe-Si-H alloys, namely Fe 0.83 Si 0.17 H 0.07 and Fe 0.83 Si 0.17 H 0.46 , using synchrotron X-ray diffraction measurements up to 125 GPa at 300 K. These alloys were synthesized by cold compression of Fe-9wt%Si in either pure H 2 or Ar-H 2 mixture medium in diamond-anvil cells. The volume increase caused by a H atom in hcp Fe-Si-H alloys is approximately eight times greater than that by a Si atom. We used the improved data set to develop a composition-dependent EoS that covers a wide range of compositions. Our calculated density and bulk sound velocity of hcp Fe-Si-H alloys suggest a large trade-off between Si and H contents in fitting the seismic properties of the inner core. Combining our new EoS with geophysical and geochemical constraints, we propose 1.6–3 wt% Si and 0.15–0.6 wt% H in the Earth's inner core.

58 GEOSCIENCES↗
DOE OSTI2022

Prismatic-to-basal plastic slip transition in zirconium

Here, we model three-dimensional dislocation ensembles in Zr pillars using newly developed mobility laws for dislocations on prismatic and basal planes. The effects of the loading orientation and temperature on the micro-scale mechanical response of single crystals are systematically explored. Easy dislocation glide is observed on prismatic planes, while hard glide occurs on basal planes. By selection of sample temperature and loading orientation, we show that the transition from prismatic to basal glide of dislocation ensembles can be controlled. We also show that the presence of dislocation cross-slip strongly promotes prismatic glide as a result of prismatic/basal cross-slip energy asymmetry. Cross-slip does not alter the occurrence of plastic slip transition but only induces a shift towards higher temperatures. The preponderance of plastic slip on basal or prismatic planes is found to be mediated by a transitional dislocation, which is composed of glissile segments on parallel prismatic planes connected by glissile super-jogs on basal planes. These findings provide a mechanistic understanding of experiments and highlight the significance of transitional prismatic-basal dislocations on the macroscopic characteristics of plasticity in HCP crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomistic and phase field simulations of three dimensional interactions of {$10\bar12$} twins with grain boundaries in Mg: twin transmission and dislocation emission

In polycrystals, the interaction of dislocations and twins with grain boundaries (GBs) plays a role in hardening and formability during plastic deformation. While dislocation-GB interactions are relatively well-understood, twin-GB interactions remain mostly unknown. In this work, an approach using molecular dynamics and phase-field simulations is followed to study the forward and lateral interactions between {$10\bar12$} twins and tilt grain boundaries in Mg. Molecular dynamics results show that the resolved shear stress on slip/twinning modes of the neighboring grain, not the geometric alignment, is the dominant factor in determining the outcome of the twin-GB interactions. For some lateral interaction configurations, as the misorientation angle increases, the resolved shear stress on the same {$10\bar12$} twin variant of the neighboring grain reduces while it increases for slip or I 2 stacking fault emissions or other twin modes such as {$11\bar12$} and {$10\bar11$}, explaining why twin transmission is not seen at high misorientation angles. Furthermore, lateral and forward interactions of the twin with tilt grain boundaries whose misorientation axes are normal to the coherent twin boundary show significantly different outcomes. For the forward interaction, the twin is absorbed and stacking faults are emitted when interacting for low misorientation angles (up to 30°) while the lateral interaction results in twin transmission, nucleation of a {$11\bar12$} twin, and emission of I 2 stacking faults. Finally, comparisons between twin interactions with symmetric and asymmetric tilt GBs with different GB structures show similar outcomes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The {10$\overline{1}$2} non-cozone twin-twin interactions in Mg: A stability and mobility study using 3-D atomistic simulations

Due to easy activation of tensile twinning in Mg, multiple {10$\overline{1}$2} twin variants can interact with each other and form twin-twin boundaries over the course of plastic deformation. Previous studies using 2-D settings provide only a partial understanding of these interactions, especially the non-cozone ones. Here, atomistic simulations are used to study the 3-D structural characteristic and evolution of the non-cozone {10$\overline{1}$2} twin-twin junctions. The study reveals the existence of new twin-twin boundaries (TTBs) such as TTB BP and TTB K2 , formed after the interaction between the basal prismatic and conjugate twin interfaces with the coherent twin boundary. Here, for both non-cozone twin-twin interactions, the {10$\overline{1}$2} TTB and its associated twin-twin junctions are found to play a major role in the {10$\overline{1}$2} twin's stability and mobility. Specifically, they promote the growth of the 3-D twin in both the normal and forward directions during the interaction and hinder the detwinning process upon unloading.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multi-phase equation of state of ultrapure hafnium to 120 GPa

Hafnium (Hf) is an industrially important material due to its large neutron absorption cross-section and its high corrosion resistance. When subjected to high pressure, Hf phase transforms from its hexagonal close packed α-Hf phase to the hexagonal ω-Hf phase. Upon further compression, ω-Hf phase transforms to the body centered cubic β-Hf phase. In this study, the high pressure phase transformations of Hf are studied by compressing and decompressing a well-characterized Hf sample in diamond anvil cells up to 120 GPa while collecting x-ray diffraction data. The phase transformations of Hf were compared in both a He pressure transmitting medium (PTM) and no PTM over several experiments. It was found that the α-Hf to ω-Hf phase transition occurs at a higher pressure during compression and lower pressure during decompression with a helium (He) PTM compared to using no PTM. Finally, there was little difference in the ω-Hf to β-Hf phase transition pressure between the He PTM and no PTM. The equation of state was fit for all three phases of Hf and under both PTM and no-PTM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Neutron scattering study of tantalum dihydride

A single-phase sample of Ta H 2.2 ( 1 ) with a hexagonal close-packed metal lattice (hcp; space group P 6 3 / m m c ) was synthesized under a hydrogen pressure of 9 GPa and a temperature of 100 °C; quenched to the liquid nitrogen temperature; recovered to ambient pressure and studied by neutron diffraction (ND) and inelastic neutron scattering (INS). The ND study showed that hydrogen atoms occupied one half of the tetrahedral (T) and all octahedral (O) interstitial sites in the hcp lattice of Ta atoms. The arrangement of the H atoms over the T sites was proven to be ordered, which lowered the symmetry of the full crystal structure of the dihydride to P 6 3 m c . Due to the resulting asymmetry in the local environment of the O sites, the H atoms were considerably displaced from the centers of these sites along the z axis, away from the H atoms occupying the neighboring T sites. The INS study demonstrated that the potential wells for H atoms at both the T and O sites are highly anharmonic and anisotropic. Thus it is shown that the potential wells at the O sites are softer along the z axis than in the x , y plane, while the T sites show opposite anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1992

Mechanism of slip and twinning

The objectives are to: (1) demonstrate the mechanisms of deformation in body centered cubic (BCC), face centered cubic (FCC), and hexagonal close-packed (HCP)-structure metals and alloys and in some ceramics as well; (2) examine the deformed microstructures (slip lines and twin boundaries) in different grains of metallic and ceramic specimens; and (3) study visually the deformed macrostructure (slip and twin bands) of metals and alloys. Some of the topics covered include: deformation behavior of materials, mechanisms of plastic deformation, slip bands, twin bands, ductile failure, intergranular fracture, shear failure, slip planes, crystal deformation, and dislocations in ceramics.

Rastani, Mansur↗
DOE OSTI2023

Overview of a Versatile Loading System for Anisotropic Material Property Characterization

Additive manufacturing, cold rolling, and other thermomechanical treatments on metals, especially HCP, can cause texture and oriented grain structures resulting in anisotropic mechanical properties. This can lead to macroscopic response that significantly deviates from isotropic assumptions which motivates studying mechanical properties in multiple directions. In addition, multiaxial loading and complex stress states overlapping the above mentioned material anisotropy can lead to unexpected outcomes. Idaho National Laboratory developed an advanced mechanical testing system to study a range of uniaxial to multiaxial stress states while measuring the anisotropic response bringing insight into the overlap between material properties and stress states. High-temperature capability and stress- or strain-controlled loading is available to enable a variety of experiment types and conditions to measure elastic, plastic, and viscoplastic properties. This poster presents the design and capabilities of this system with preliminary results highlighting the benefits of multiaxial loading and anisotropic analysis in an integrated system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1986

The structure of small metal clusters

One metal atom surrounded by its 12 nearest neighbors is considered for both D(3d) (face-centered cubic-like) and D(3h) (hexagonal close-packed-like) geometries. For Al and Be, the neutral cluster and the positive and negative ions are considered for idealized (all bonds equal) and distorted geometries. The D(3d) geometry is found to be the lowest for Be13, while the D(3h) geometry is lower for Al13. This is the reverse of what is expected based upon the bulk metal structures, Be(hcp) and Al(fcc). Al13 is found to have only small distortions, while Be13 shows large distortions for both the D(3d) and D(3h) geometries. The ions have geometries which are similar to those found for the neutral systems. Both all-electron and effective core potential calculations were carried out on the X13 clusters; the agreement is very good.

Bauschlicher, C. W., Jr.↗
DOE OSTI2020

Tight-binding study of beryllium

In this work, we have applied the Naval Research Laboratory Tight-binding (NRL-TB) Method to the hcp alkaline-earth metal Beryllium. This approach consists of fitting to energy band and total energy data generated by the Linearized Augmented Plane Wave (LAPW) for the fcc, bcc, sc, and hcp structures as a function of volume. First, we found that using the Generalized Gradient Approximation (GGA) for the input data secures a better agreement to experimental volumes than the LDA. Second, we found that including small volumes to the fit is needed to get TB parameters that are transferable enough to successfully predict the energies of structures that were not fitted, and to perform molecular dynamics (MD) simulations. The non-orthogonal Hamiltonian obtained, is successful in correctly predicting the hcp lattice as the ground state of Be and finding eight other structures, that were not fitted to LAPW, positioned at higher energies. In addition, the NRL-TB produces accurate energy bands, densities of states, elastic constants, the Bain path and several quantities derived from MD simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultimate Strength of Metals

We present a theoretical model that predicts the peak strength of polycrystalline metals based on the activation energy (or stress) required to cause deformation via amorphization. Building on extensive earlier work, this model is based purely on materials properties, requires no adjustable parameters, and is shown to accurately predict the strength of four exemplar metals (fcc, bcc, and hcp, and an alloy). This framework reveals new routes for design of more complex high-strength materials systems, such as compositionally complex alloys, multiphase systems, nonmetals, and composite structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

The effect of elastic strains on the adsorption energy of H, O, and OH in transition metals

The influence of elastic strains on the adsorption of H, O, and OH on the (111) surfaces of 8 fcc (Ni, Cu, Pd, Ag, Pt, Au, Rh, Ir) and on the (0001) surfaces of 3 hcp (Co, Zn, Cd) transition metals was analyzed by means of density functional theory calculations. To this end, surface slabs were subjected to different strain states (uniaxial, biaxial, shear, and a combination of them) up to strains dictated by the mechanical stability limits indicated by phonon calculations. It was found that the adsorption energy followed the predictions of the d-band theory but – surprisingly – the variations in the adsorption energy only depended on the area of the adsorption hole and not on the particular elastic strain tensor applied to achieve this area. The analysis of the electronic structure showed that the applied strains did not modify the shape of the Projected Density of States (PDOS) of the d-orbitals of the transition metals but only led to a shift in the energy levels. Moreover, the presence of the adsorbates on the surfaces led to negligible changes in the PDOS. Thus, the adsorption energies were a function of the Fermi energy which in turn was associated with the change of the area of the adsorption through a general linear law that was valid for all metals. Furthermore, the information in this paper allows the immediate and accurate estimation of the effect of any elastic strain on the adsorption energies of H, O, and OH in 11 transition metals with more than half-filled d-orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

New Cost-Effective Halide Solid Electrolytes for All-Solid-State Batteries: Mechanochemically Prepared Fe 3+ -Substituted Li 2 ZrCl 6

Owing to the combined advantages of sulfide and oxide solid electrolytes (SEs), that is, mechanical sinterability and excellent (electro)chemical stability, recently emerging halide SEs such as Li 3 YCl 6 are considered to be a game changer for the development of all-solid-state batteries. However, the use of expensive central metals hinders their practical applicability. In this study, a new halide superionic conductors are reported that are free of rare-earth metals: hexagonal close-packed (hcp) Li 2 ZrCl 6 and Fe 3+ -substituted Li 2 ZrCl 6 , derived via a mechanochemical method. Conventional heat treatment yields cubic close-packed monoclinic Li 2 ZrCl 6 with a low Li + conductivity of 5.7 × 10 –6 S cm –1 at 30 °C. In contrast, hcp Li 2 ZrCl 6 with a high Li + conductivity of 4.0 × 10 –4 S cm –1 is derived via ball-milling. More importantly, the aliovalent substitution of Li 2 ZrCl 6 with Fe 3+ , which is probed by complementary analyses using X-ray diffraction, pair distribution function, X-ray absorption spectroscopy, and Raman spectroscopy measurements, drastically enhances the Li + conductivity up to ≈1 mS cm –1 for Li 2.25 Zr 0.75 Fe 0.25 Cl 6 . The superior interfacial stability when using Li 2+ x Zr 1– x Fe x Cl 6 , as compared to that when using conventional Li 6 PS 5 Cl, is proved. Furthermore, an excellent electrochemical performance of the all-solid-state batteries is achieved via the combination of Li 2 ZrCl 6 and single-crystalline LiNi 0.88 Co 0.11 Al 0.01 O 2 .

25 ENERGY STORAGE↗
DOE OSTI2023

A computational study of how surfaces affect slip family activity

Plastic deformation behavior is most conveniently assessed by characterization on a surface, but whether such observations are representative of bulk properties is uncertain. Motivated by reported inconsistencies in slip resistance probed at different depths, we investigated (i) whether the average slip family activity is affected by the presence of a surface and (ii) how the kinematic nature of available slip families influences a potential surface effect. The slip family activity as a function of distance from the surface was extracted from full-field crystal plasticity simulations of random polycrystalline hexagonal close-packed (HCP) and body-centered cubic (BCC) metals as examples of mixed in contrast to universally-high numbers of slip systems per family. Under certain conditions, a deviation from bulk slip activity is observed up to about two grains from the surface. For the easiest (least slip-resistant) family, a surface effect of decreasing activity with depth emerges if the number of slip systems falls below about six. For harder families, slip activity always increases with depth. Furthermore, these phenomena are explained on the basis of varying constraints with depth in connection with the kinematic properties of slip families in the material.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Shear localization in metallic materials at high strain rates

Three factors govern adiabatic shear localization: strain hardening (or softening), strain-rate hardening, and thermal softening. It is typically associated with large shear strains (>1), high strain rates (10 3 –10 7 s –1 ), and high temperatures (40–100% of melting point), all of which happen within narrow regions with widths of about 1–200 μm. It is often an undesirable phenomenon, leading to failure, but there are situations where it is desirable, e. g., the generation of machining chips. Here, we review the development of both theoretical and experimental achievements, from the initiation of shear bands to their propagation with emphasis on three aspects: novel experimental techniques, novel materials, and nano/microstructural effects. The principal characteristics of adiabatic shear bands in metallic materials at the nano- and micro-scale are described. Bands that were formerly identified as transformed actually consist of nanocrystalline/ultrafine grains. These grains result from the breakup of the microstructure by a rotational recrystallization process. The evolution of the microstructure inside shear bands and their interactions for hcp, bcc, and fcc alloys, high-entropy alloys, nanocrystalline alloys, and metallic glasses are analyzed mechanistically. In conclusion, the gaps in the field and opportunities for future research are identified. Modern experimental characterization and computational techniques enable a more profound and predictive understanding of adiabatic shear localization and its avoidance in advanced materials.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Characterization of erosion of metallic materials under cavitation attack in a mineral oil

Cavitation erosion and erosion rates of eight metallic materials representing three crystal structures were studied using a 20-kHz ultrasonic magnetostrictive oscillator in viscous mineral oil. The erosion rates of the metals with an fcc matrix were 10 to 100 times higher than that of an hcp-matrix titanium alloy. The erosion rates of iron and molybdenum, with bcc matrices, were higher than that of the titanium alloy but lower than those of the fcc metals. Scanning electron microscopy indicates that the cavitation pits are initially formed at the grain boundaries and precipitates and that the pits that formed at the triple points grew faster than the others. Transcrystalline craters formed by cavitation attack over the surface of grains and roughened the surfaces by multiple slip and twinning. Surface roughness measurements show that the pits that formed over the grain boundaries deepended faster than other pits. Computer analysis revealed that a geometric expression describes the nondimensional erosion curves during the time period 0.5 t(0) t 2.5 t(0), where t(0) is the incubation period. The fcc metals had very short incubation periods; the titanium alloy had the longest incubation period.

Rao, B. C. S.↗