SEARCH · Search NASA

Results for “HORIZONTAL TEMPERATURE DISTRIBUTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Relative abundance of the light ions in the winter nighttime topside ionosphere

Ion concentration measurements with the retarding potential analyzer onboard OGO 6 satellite have served as basis for investigation of the distribution of the light ions, H(+) and He(+), relative to that of O(+) in the 500- to 800-km height range in the winter nighttime ionosphere. This concentration ratio exhibits distinct large-scale horizontal variations, with a relative depression in the ratio observed over a broad region about -45 deg longitude northward of approximately 40 deg dip latitude. The lower ratios are associated primarily with well-defined relative increases in the abundance of O(+), and occur in the same longitude sector that has been characterized in an earlier study by both an observed concurrent relative enhancement in ion temperature and the presence of large fluxes of energetic electrons. Comparisons are presented for the altitude distributions of the concentration ratio between regions representing extremes of the horizontal variation. A simple diffusive-equilibrium model demonstrates that the effects of ion temperature on the O(+) vertical distribution are a significant factor leading to the observed variation of the concentration ratio.

Sanatani, S.↗

NASA NTRS1982

Determination of the horizontal and vertical distribution of clouds from infrared satellite sounding data

A numerical algorithm, based on a physical inversion of the radiative transfer equation, is developed to retrieve the global distribution of the horizontal cloud cover, the cloud-top pressure levels and their temperature. The algorithm makes use of infrared and microwave temperature sounding data to derive the clear-column vertical temperature profiles and then uses the same infrared sounding data to obtain the corresponding cloud parameters. Experimental verification of this method is carried out using data from the High resolution Infrared Sounder (HIRS) and the Microwave Sounding Unit (MSU) operating on the NOAA weather satellite system.

Chahine, M. T.↗

NASA NTRS1984

Thermal stress analysis for a wood composite blade

Heat conduction throughout the blade and the distribution of thermal stresses caused by the temperature distribution were determined for a laminated wood wind turbine blade in both the horizontal and vertical positions. Results show that blade cracking is not due to thermal stresses induced by insulation. A method and practical example of thermal stress analysis for an engineering body of orthotropic materials is presented.

Fu, K. C.↗

NASA NTRS1981

The atmosphere of Jupiter - An analysis of the Voyager radio occultation measurements

Coherently related S and X band signals of 2.3 and 8.4 GHz, respectively, which were transmitted from Voyagers 1 and 2 were used to probe the Jovian atmosphere. Height profiles of the gas refractivity, molecular number density, pressure, temperature, and microwave absorption in the troposphere and stratosphere were observed at latitudes ranging from 0 to 70 deg S. At 1000 mbar, the temperature was + or - 5 K and the lapse rate was equal to the adiabatic value of 2.1 K/km within the resolution of the measurements. The ammonia abundance in this region was 0.022 + or - 0.008%, which is in good agreement with values derived from cosmic abundance considerations. The tropopause at the 140 mbar level had a temperature of 110 K, which increased with increasing altitude, reaching 160 + or - 20 K in the 10 to 1 mbar region. Significant horizontal density variations were detected in the stratosphere, which implies a nonuniform temperature and aerosol distribution across the Jovian disk or across high- and low-pressure regions due to local atmospheric dynamics.

Lindal, G. F.↗

NASA NTRS2017

A Method for Obtaining High Frequency, Global, IR-Based Convective Cloud Tops for Studies of the TTL

Models of varying complexity that simulate water vapor and clouds in the Tropical Tropopause Layer (TTL) show that including convection directly is essential to properly simulating the water vapor and cloud distribution. In boreal winter, for example, simulations without convection yield a water vapor distribution that is too uniform with longitude, as well as minimal cloud distributions. Two things are important for convective simulations. First, it is important to get the convective cloud top potential temperature correctly, since unrealistically high values (reaching above the cold point tropopause too frequently) will cause excessive hydration of the stratosphere. Second, one must capture the time variation as well, since hydration by convection depends on the local relative humidity (temperature), which has substantial variation on synoptic time scales in the TTL. This paper describes a method for obtaining high frequency (3-hourly) global convective cloud top distributions which can be used in trajectory models. The method uses rainfall thresholds, standard IR brightness temperatures, meteorological temperature analyses, and physically realistic and documented corrections IR brightness temperature corrections to derive cloud top altitudes and potential temperatures. The cloud top altitudes compare well with combined CLOUDSAT and CALIPSO data, both in time-averaged overall vertical and horizontal distributions and in individual cases (correlations of .65-.7). An important finding is that there is significant uncertainty (nearly .5 km) in evaluating the statistical distribution of convective cloud tops even using lidar. Deep convection whose tops are in regions of high relative humidity (such as much of the TTL), will cause clouds to form above the actual convection. It is often difficult to distinguish these clouds from the actual convective cloud due to the uncertainties of evaluating ice water content from lidar measurements. Comparison with models show that calculated cloud top altitudes are generally higher than those calculated by global analyses (e.g., MERRA). Interannual variability in the distribution of convective cloud top altitudes is also investigated.

hydration↗

NASA NTRS2016

A Method for Obtaining High Frequency, Global, IR-Based Convective Cloud Tops for Studies of the Tropical Tropopause Layer

Models of varying complexity that simulate water vapor and clouds in the Tropical Tropopause Layer (TTL) show that including convection directly is essential to properly simulating the water vapor and cloud distribution. In boreal winter, for example, simulations without convection yield a water vapor distribution that is too uniform with longitude, as well as cloud incidences that are too low. Two things are important for convective simulations. First, it is important to get the convective cloud top potential temperature correctly, since unrealistically high values (reaching above the cold point tropopause too frequently) will cause excessive hydration of the stratosphere. Second, one must capture the time variation as well, since hydration by convection depends on the local relative humidity (temperature), which has substantial variation on synoptic time scales in the TTL. This paper describes a method for obtaining high frequency (3-hourly) global convective cloud top distributions which can be used in trajectory models. The method uses rainfall thresholds, standard IR (infra-red) brightness temperatures, meteorological temperature analyses, and physically realistic and documented corrections to IR brightness temperatures to derive cloud top altitudes and potential temperatures. The cloud top altitudes compare well with combined CLOUDSAT and CALIPSO data, both in time-averaged overall vertical and horizontal distributions and in individual cases (correlations of .65-.7). Results from the method are compared to convective distributions currently used by global models. In general, the method shows that models underestimate convective cloud top altitudes.

tropopause↗

NASA NTRS1991

Natural convection in binary gases due to horizontal thermal and solutal gradients

The influence of augmenting and opposing thermal and solutal buoyancy forces on natural convection of binary gases due to horizontal temperature and concentration gradients is examined through comparison of smoke flow visualization and measured temperature and concentration distributions with numerical predictions. The observed flow at the cold wall was unsteady for opposing body forces. The same basic flow structure was observed, but the unsteady flow intensifies as the opposing solutal buoyancy force increases as compared to the thermal buoyancy force. Comparison of predicted and measured temperatures and concentrations is fair overall, but the steady-state analytical model fails to predict the unsteady flow and heat and mass transport for opposing body forces.

Weaver, J. A.↗

NASA NTRS2004

Experiments on Heat Transfer in a Thin Liquid Film Flowing Over a Rotating Disk

An experimental study of heat transfer into a thin liquid film on a rotating heated disk is described. Deionized water was introduced at the center of a heated. horizontal disk with a constant film thickness and uniform radial velocity. Radial distribution of the disk surface temperatures was measured using a thermocouple/slip ring arrangement. Experiments were performed for a range of liquid flow rates between 3.01pm and 15.01pm. The angular speed of the disk was varied from 0 rpm to 500 rpm. The local heat transfer coefficient was determined based on the heat flux supplied to the disk and the temperature difference between the measured disk surface temperature and the liquid entrance temperature onto the disk. The local heat transfer coefficient was seen to increase with increasing flow rate as well as increasing angular velocity of the disk. Effect of rotation on heat transfer was largest for the lower liquid flow rates with the effect gradually decreasing with increasing liquid flow rates. Semi-empirical correlations are presented in this study for the local and average Nusselt numbers.

Sankaran, Subramanian↗

NASA NTRS1982

Infrared remote sensing of the vertical and horizontal distribution of clouds

An algorithm has been developed to derive the horizontal and vertical distribution of clouds from the same set of infrared radiance data used to retrieve atmospheric temperature profiles. The method leads to the determination of the vertical atmospheric temperature structure and the cloud distribution simultaneously, providing information on heat sources and sinks, storage rates and transport phenomena in the atmosphere. Experimental verification of this algorithm was obtained using the 15-micron data measured by the NOAA-VTPR temperature sounder. After correcting for water vapor emission, the results show that the cloud cover derived from 15-micron data is less than that obtained from visible data.

Chahine, M. T.↗

NASA NTRS1988

Verification of regional climates of GISS GCM. Part 1: Winter

Verification is made of the synoptic fields, sea level pressure, precipitation rate, 200 mb zonal wind and the surface resultant wind, generated by two versions of the GISS climate model. The models differ regarding the horizontal resolution of the computational grids and the specification of the sea surface temperatures. Maps of the regional distributions of seasonal variations of the model fields are shown alongside maps showing the observed distributions. Comparisons of the model results with observations are discussed, and also summarized in tables according to geographic regions.

Druyan, Leonard M.↗

NASA NTRS2003

Factors Affecting the Evolution of Hurricane Erin and the Distributions of Hydrometeors: Role of Microphysical Processes

Fine-resolution simulations of Hurricane Erin 2001 are conducted using the Penn State University/National Center for Atmospheric Research mesoscale model version 3.5 to investigate the role of thermodynamic, boundary layer and microphysical processes in Erin's growth and maintenance, and their effects on the horizontal and vertical distributions of hydrometeors. Through comparison against radar, radiometer, and dropsonde data collected during the Convection and Moisture Experiment 4, it is seen that realistic simulations of Erin are obtained provided that fine resolution simulations with detailed representations of physical processes are conducted. The principle findings of the study are as follows: 1) a new iterative condensation scheme, which limits the unphysical increase of equivalent potential temperature associated with most condensation schemes, increases the horizontal size of the hurricane, decreases its maximum rainfall rate, reduces its intensity, and makes its eye more moist; 2) in general, microphysical parameterization schemes with more categories of hydrometeors produce more intense hurricanes, larger hydrometeor mixing ratios, and more intense updrafts and downdrafts; 3) the choice of coefficients describing hydrometeor fall velocities has as big of an impact on the hurricane simulations as does choice of microphysical parameterization scheme with no clear relationship between fall velocity and hurricane intensity; and 4) in order for a tropical cyclone to adequately intensify, an advanced boundary layer scheme (e.g., Burk-Thompson scheme) must be used to represent boundary layer processes. The impacts of varying simulations on the horizontal and vertical distributions of different categories of hydrometeor species, on equivalent potential temperature, and on storm updrafts and downdrafts are examined to determine how the release of latent heat feedbacks upon the structure of Erin. In general, all simulations tend to overpredict precipitation rate and hydrometeor mixing ratios. The ramifications of these findings for quantitative precipitation forecasts (QPFs) of tropical cyclones are discussed.

McFarquhar, Greg M.↗

NASA NTRS1986

On the oblateness and rotation rate of Neptune's atmosphere

Recent observations of a stellar occultation by Neptune give an oblateness of 0.022 + or - 0.004 for Neptune's atmosphere at the 1-microbar pressure level. This results is consistent with hydrostatic equilibrium at a uniform atmospheric rotation period of 15 hours, although the error bars on quantities used in the calculation are such that an 18-hour period is not excluded. The oblateness of a planetary atmosphere is determined from stellar occultations by measuring the times at which a specified point on immersion or emersion occultation profiles is reached. Whether this standard procedure for deriving the shape of the atmosphere is consistent with what is known about vertical and horizontal temperature gradients in Neptune's atmosphere is evaluated. The nature of the constraint placed on the interior mass distribution by an oblateness determined in this manner is consided, as is the effects of possible differential rotation. A 15-hour Neptune internal mass distribution is approximately homologous to Uranus', but an 18-hour period is not. The implications for Neptune's interior structure if its body rotation period is actually 18 hours are discussed.

Hubbard, W. B.↗

NASA NTRS1989

Verification of regional climates of GISS GCM. Part 2: Summer

Verification is made of the synoptic fields, sea-level pressure, precipitation rate, 200mb zonal wind and the surface resultant wind generated by two versions of the Goddard Institute for Space Studies (GISS) climate model. The models differ regarding the horizontal resolution of the computation grids and the specification of the sea-surface temperatures. Maps of the regional distributions of seasonal means of the model fields are shown alongside maps that show the observed distributions. Comparisons of the model results with observations are discussed and also summarized in tables according to geographic region.

Druyan, Leonard M.↗

NASA NTRS1983

Analytical and Numerical Solution for a Solidifying Liquid Alloy Slab

Numerical and analytical solutions are presented for the temperature and concentration distributions during the solidification of a binary liquid alloy slab. The slab is taken to be of a finite depth but infinite in the horizontal direction. The solidification process is started by withdrawing a fixed amount of heat from the lower surface of the slab. The upper surface of the slab is subjected to both radiation and convective conditions. The solution gives the concentration and temperature profiles and the interface position as a function of time. Due to the smallness of the mass diffusion coefficient in the solid, the numerical solution method breaks down whenever the ratio of the diffusivities in the solid and the liquid falls below a certain value. An analytical method is developed which gives accurate solution for any value of the diffusivity ratio.

Antar, B. N.↗

NASA NTRS1987

Accurate pressure gradient calculations in hydrostatic atmospheric models

A method for the accurate calculation of the horizontal pressure gradient acceleration in hydrostatic atmospheric models is presented which is especially useful in situations where the isothermal surfaces are not parallel to the vertical coordinate surfaces. The present method is shown to be exact if the potential temperature lapse rate is constant between the vertical pressure integration limits. The technique is applied to both the integration of the hydrostatic equation and the computation of the slope correction term in the horizontal pressure gradient. A fixed vertical grid and a dynamic grid defined by the significant levels in the vertical temperature distribution are employed.

Carroll, John J.↗

NASA NTRS2005

Evolution of a Florida Cirrus Anvil

This paper presents a detailed study of a single thunderstorm anvil cirrus cloud measured on 21 July 2002 near southern Florida during the Cirrus Regional Study of Tropical Anvils and Cirrus Layers--Florida Area Cirrus Experiment (CRYSTAL-FACE). NASA WB-57F and University of North Dakota Citation aircraft tracked the microphysical and radiative development of the anvil for 3 h. Measurements showed that the cloud mass that was advected downwind from the thunderstorm was separated vertically into two layers: a cirrus anvil with cloud-top temperatures of -45?C lay below a second, thin tropopause cirrus (TTC) layer with the same horizontal dimensions as the anvil and temperatures near -70?C. In both cloud layers, ice crystals smaller than 50 ?m across dominated the size distributions and cloud radiative properties. In the anvil, ice crystals larger than 50 ?m aggregated and precipitated while small ice crystals increasingly dominated the size distributions; as a consequence, measured ice water contents and ice crystal effective radii decreased with time. Meanwhile, the anvil thinned vertically and maintained a stratification similar to its environment. Because effective radii were small, radiative heating and cooling were concentrated in layers approximately 100 m thick at the anvil top and base. A simple analysis suggests that the anvil cirrus spread laterally because mixing in these radiatively driven layers created horizontal pressure gradients between the cloud and its stratified environment. The TTC layer also spread but, unlike the anvil, did not dissipate--perhaps because the anvil shielded the TTC from terrestrial infrared heating. Calculations of top-of-troposphere radiative forcing above the anvil and TTC showed strong cooling that tapered as the anvil evolved.

Garrett, T. J.↗

NASA NTRS1980

Prediction of attenuation by rain

A new model is presented for the prediction of attenuation by rain on either terrestrial or slant earth-to-space propagation paths. The model was developed using geophysical observations of the statistics of point rain rate, of the horizontal structure of rainfall, and of the vertical temperature structure of the atmosphere. The model was tested by comparison with attenuation distribution observations. The results show excellent agreement; the observations differ from model predictions by less than the rms deviations predicted by the model.

Crane, R. K.↗

NASA NTRS1984

Some minimization calculations concerning the effect of horizontal eddy momentum fluxes on the equilibrium zonal mean motions

A simplified linear two-level zonally averaged atmospheric model is used to determine the minimum zonal kinetic energy (ZKE) plus the zonal available potential energy (ZAPE) of equilibrium states for any distribution of horizontal eddy momentum fluxes. The model assumes fixed thermal forcing except for coefficients of the longwave radiative response to temperature. Some distinctive features of the model solutions are described. It is found that: the states of minimum ZKE or minimum ZKE + ZAPE contain a jet stream; the structure of the zonal winds is dependent on thermal forcing; the horizontal eddy momentum fluxes which minimize ZKE or ZKE + ZAPE can be up-gradient everywhere with respect to the upper level zonal mean zonal winds, or down-gradient depending on the thermal forcing; ZKE minimization results in a jet stream at 54 deg latitude independent of external parameters. The minimization of ZKE + ZAPE results in a jet stream at 35 deg latitude for a planet of the earth's radius and similar static stability.

Schneider, E. K.↗