Search NASA⌕ Search

SEARCH · Search NASA

Results for “HTSC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Revealing the high-energy electronic excitations underlying the onset of high-temperature superconductivity in cuprates

In strongly correlated systems the electronic properties at the Fermi energy (EF) are intertwined with those at high-energy scales. One of the pivotal challenges in the field of high-temperature superconductivity (HTSC) is to understand whether and how the high-energy scale physics associated with Mott-like excitations (|E-EF|>1eV) is involved in the condensate formation. Here, we report the interplay between the many-body high-energy CuO2 excitations at 1.5 and 2eV, and the onset of HTSC. This is revealed by a novel optical pump-supercontinuum-probe technique that provides access to the dynamics of the dielectric function in Bi2Sr2Ca0.92Y0.08Cu2O8+δ over an extended energy range, after the photoinduced suppression of the superconducting pairing. These results unveil an unconventional mechanism at the base of HTSC both below and above the optimal hole concentration required to attain the maximum critical temperature (Tc).

36 MATERIALS SCIENCE↗

Chemical versus physical pressure effects on the structure transition of bilayer nickelates

The observation of high-T c superconductivity (HTSC) in concomitant with pressure-induced orthorhombic-tetragonal structural transition in bilayer La 3 Ni 2 O 7 has sparked hopes of achieving HTSC by stabilizing the tetragonal phase at ambient pressure. Chemical pressure, introduced by replacing La 3+ with smaller rare-earth R 3+ has been considered as a potential route. However, our experimental and theoretical investigation reveals that such substitutions, despite causing lattice contraction, actually produce stronger orthorhombic distortions, requiring higher pressures for the structural transition. A linear extrapolation of P c versus the average size of A-site cations (<$r_A$>), yields a putative critical value of (<$r_A$>) ≈ 1.23 Å for P c ≈ 1 bar. The negative correlation between P c and (<$r_A$>) indicates that replacing La 3+ with smaller R 3+ ions is unlikely to reduce P c to ambient pressure. Instead, substituting La 3+ with larger cations like Sr 2+ or Ba 2+ might be a feasible approach. Our results provide guidance for realizing ambient-pressure HTSC in bilayer nickelates.

36 MATERIALS SCIENCE↗

Dynamics of correlation-frozen antinodal quasiparticles in superconducting cuprates

Many puzzling properties of high–critical temperature ( T c ) superconducting (HTSC) copper oxides have deep roots in the nature of the antinodal quasiparticles, the elementary excitations with wave vector parallel to the Cu–O bonds. These electronic states are most affected by the onset of antiferromagnetic correlations and charge instabilities, and they host the maximum of the anisotropic superconducting gap and pseudogap. We use time-resolved extremeultraviolet photoemission with proper photon energy (18 eV) and time resolution (50 fs) to disclose the ultrafast dynamics of the antinodal states in a prototypical HTSC cuprate. After photoinducing a nonthermal charge redistribution within the Cu and O orbitals, we reveal a dramatic momentum-space differentiation of the transient electron dynamics. Whereas the nodal quasiparticle distribution is heated up as in a conventional metal, new quasiparticle states transiently emerge at the antinodes, similarly to what is expected for a photoexcited Mott insulator, where the frozen charges can be released by an impulsive excitation. This transient antinodal metallicity is mapped into the dynamics of the O-2p bands, thus directly demonstrating the intertwining between the lowand high-energy scales that is typical of correlated materials. Our results suggest that the correlation-driven freezing of the electrons moving along the Cu–O bonds, analogous to the Mott localization mechanism, constitutes the starting point for any model of high- T c superconductivity and other exotic phases of HTSC cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonlinear interaction of a ferromagnet with a high-temperature superconductor

The interaction of an Abrikosov vertex with a ferromagnetic substrate is taken into account in the model of a layered high-temperature superconductor (HTSC). The magnetization reversal loops are calculated by the Monte Carlo method for various values of the magnetic moment of the substrate and at various temperatures. The nonlinearity of the interaction of the superconductor with the ferromagnet is demonstrated. The magnetization of HTSC films on magnetic and nonmagnetic substrates is measured. It is found that the ferromagnetism of the substrate strongly affects the shape and magnitude of the magnetization of the HTSC-substrate composite. Experimental data are found to correlate with the results of calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron Correlation and High-Temperature Superconductivity

Strong electron correlation plays a central role in the high-temperature superconductivity (HTSC) of cuprates. However, to date, research has focused only on its role in spin dynamics and related effects, even though it is becoming increasingly clear that spin alone may not be sufficient to create HTSC. Here, we discuss a possible role of electron correlation in the Bose–Einstein condensation (BEC) of Cooper pairs. Recently, we succeeded in observing dynamic electron correlation via inelastic X-ray scattering through results presented in real space. We discovered that electron correlations are strongly modified in the plasmon, proving that electron dynamics significantly affect electron correlation. Earlier, we found that in 4 He, the atom–atom distance in the BE condensate is 10% longer than that in the non-condensate. These results suggest the possibility that the reduction in electron-repulsion energy upon BEC is driving T c to high values. Thus, electron correlation itself could be the origin of the HTSC phenomenon.

Bose–Einstein condensation↗

AMSAHTS 1990: Advances in Materials Science and Applications of High Temperature Superconductors

This publication is comprised of abstracts for oral and poster presentations scheduled for AMSAHTS '90. The conference will focus on understanding high-temperature superconductivity with special emphases on materials issues and applications. AMSAHTS '90, will highlight the state of the art in fundamental understanding of the nature of high-Tc superconductivity (HTSC) as well as the chemistry, structure, properties, processing and stability of HTSC oxides. As a special feature of the conference, space applications of HTSC will be discussed by NASA and Navy specialists.

Flom, Yury↗

In Situ deposition of YBCO high-T(sub c) superconducting thin films by MOCVD and PE-MOCVD

Metalorganic Chemical Vapor Deposition (MOCVD) offers the advantages of a high degree of compositional control, adaptability for large scale production, and the potential for low temperature fabrication. The capability of operating at high oxygen partial pressure is particularly suitable for in situ formation of high temperature superconducting (HTSC) films. Yttrium barium copper oxide (YBCO) thin films having a sharp zero-resistance transition with T( sub c) greater than 90 K and Jc approx. 10 to the 4th power A on YSZ have been prepared, in situ, at a substrate temperature of about 800 C. Moreover, the ability to form oxide films at low temperature is very desirable for device applications of HTSC materials. Such a process would permit the deposition of high quality HTSC films with a smooth surface on a variety of substrates. Highly c-axis oriented, dense, scratch resistant, superconducting YBCO thin films with mirror-like surfaces have been prepared, in situ, at a reduced substrate temperature as low as 570 C by a remote microwave-plasma enhanced metalorganic chemical vapor deposition (PE-MOCVD) process. Nitrous oxide was used as a reactant gas to generate active oxidizing species. This process, for the first time, allows the formation of YBCO thin films with the orthorhombic superconducting phase in the as-deposited state. The as-deposited films grown by PE-MOCVD show attainment of zero resistance at 72 K with a transition width of about 5 K. MOCVD was carried out in a commercial production scale reactor with the capability of uniform deposition over 100 sq cm per growth run. Preliminary results indicate that PE-MOCVD is a very attractive thin film deposition process for superconducting device technology.

Zhao, J.↗

AMSAHTS 1990: Advances in Materials Science and Applications of High Temperature Superconductors

This publication is comprised of abstracts for oral and poster presentations scheduled for AMSAHTS '90. The conference focused on understanding high temperature superconductivity with special emphasis on materials issues and applications. AMSAHTS 90, highlighted the state of the art in fundamental understanding of the nature of high-Tc superconductivity (HTSC) as well as the chemistry, structure, properties, processing and stability of HTSC oxides. As a special feature of the conference, space applications of HTSC were discussed by NASA and Navy specialists.

Bennett, Larry H.↗

In-situ deposition of YBCO high-Tc superconducting thin films by MOCVD and PE-MOCVD

Metal-Organic Chemical Vapor Deposition (MOCVD) offers the advantages of a high degree of compositional control, adaptability for large scale production, and the potential for low temperature fabrication. The capability of operating at high oxygen partial pressure is particularly suitable for in situ formation of high temperature superconducting (HTSC) films. Yttrium barium copper oxide (YBCO) thin films having a sharp zero-resistance transition with T(sub c) greater than 90 K and J(sub c) of approximately 10(exp 4) A on YSZ have been prepared, in situ, at a substrate temperature of about 800 C. Moreover, the ability to form oxide films at low temperature is very desirable for device applications of HTSC materials. Such a process would permit the deposition of high quality HTSC films with a smooth surface on a variety of substrates. Highly c-axis oriented, dense, scratch resistant, superconducting YBCO thin films with mirror-like surfaces have been prepared, in situ, at a reduced substrate temperature as low as 570 C by a remote microwave-plasma enhanced metal-organic chemical vapor deposition (PE-MOCVD) process. Nitrous oxide was used as a reactant gas to generate active oxidizing species. This process, for the first time, allows the formation of YBCO thin films with the orthorhombic superconducting phase in the as-deposited state. The as-deposited films grown by PE-MOCVD show attainment of zero resistance at 72 K with a transition width of about 5 K. MOCVD was carried out in a commercial production scale reactor with the capability of uniform deposition over 100 sq cm per growth run. Preliminary results indicate that PE-MOCVD is a very attractive thin film deposition process for superconducting device technology.

Zhao, J.↗

Analysis of Yttrium-Barium-Copper-Oxide by x ray diffraction and mechanical characterization

The efforts in developing high-temperature superconductor (HTSC) YBa2Cu3O7 electrical leads are to benefit future NASA missions that will carry payloads with sensitive instruments operating at cryogenic temperatures. Present-day leads made of copper or magnesium are responsible for as much as 50 percent of the parasitic heat load on cryogenic systems. A reduction of this load could be achieved by replacing the conventional materials with HTSC ceramic electrical leads. Superconductor quality has become a concern in the industry, as has the development of effective evaluation methods. The factors that need to be examined for these materials include material purity, mechanical properties, and superconducting ability below the critical temperature. We applied several methods to study these factors: thermogravimetric analysis, x-ray diffraction, tensile testing, and laser-generated ultrasound. Our objectives were to determine the average tensile strength and Young's modulus of the HTSC material and to compare them to those values for copper and manganin.

Arsenovic, Petar↗

The thermopower in the temperature range T(sub c)-1000K and the bank spectrum of Bi-based superconductors

The temperature dependencies of thermopower, S, in the range T = T(sub c)-1000K as well as of resistivity and Hall coefficient in the range T = T(sub c)-300K for the single-phase ceramic samples Bi2Sr2Ca(1-x)Nd(x)Cu2O(y) have been measured. It was found that the S(T) dependencies in normal phase have three characteristic regions. Despite the fact that the S(T) dependencies in Bi-based high-T(sub c) superconductors (HTSC) differ essentially from ones in Y-based HTSC at T = T(sub c)-300K, the main feature of theirs (S(T) = const at high temperatures) retains in samples investigated at T is greater than 620K. The results obtained have been analyzed on the basis of the narrow-band model with the use of assumption of slight asymmetry of the conductive band. The band spectrum parameters of the samples studied have been calculated. An analysis of the tendencies in these parameters changes with samples composition varying enables to make the conclusion about the similarity of the main features of the conductive band structure in Y- and Bi-based HTSC.

Gasumyants, V. E.↗

Magnetic Flux Compression Concept for Nuclear Pulse Propulsion and Power

The desire for fast, efficient interplanetary transport requires propulsion systems having short acceleration times and very high specific impulse attributes. Unfortunately, most highly efficient propulsion systems which are within the capabilities of present day technologies are either very heavy or yield very low impulse such that the acceleration time to final velocity is too long to be of lasting interest, One exception, the nuclear thermal thruster, could achieve the desired acceleration but it would require inordinately large mass ratios to reach the range of desired final velocities. An alternative approach, among several competing concepts that are beyond our modern technical capabilities, is a pulsed thermonuclear device utilizing microfusion detonations. In this paper, we examine the feasibility of an innovative magnetic flux compression concept for utilizing microfusion detonations, assuming that such low yield nuclear bursts can be realized in practice. In this concept, a magnetic field is compressed between an expanding detonation driven diamagnetic plasma and a stationary structure formed from a high temperature superconductor (HTSC). In general, we are interested in accomplishing two important functions: (1) collimation of a hot diamagnetic plasma for direct thrust production; and (2) pulse power generation for dense plasma ignition. For the purposes of this research, it is assumed that rnicrofusion detonation technology may become available within a few decades, and that this approach could capitalize on recent advances in inertial confinement fusion ICF) technologies including magnetized target concepts and antimatter initiated nuclear detonations. The charged particle expansion velocity in these detonations can be on the order of 10 (exp 6)- 10 (exp 7) meters per second, and, if effectively collimated by a magnetic nozzle, can yield the Isp and the acceleration levels needed for practical interplanetary spaceflight. The ability to ignite pure fusion micro-bursts with reasonable levels of input energy is an equally challenging scientific problem. It remains to be seen, however, whether an effective ignition driver can be developed which meets the requirements for practical spaceflight application (namely high power density, compactness, low weight, and low cost). In this paper, system level performance and design issues are examined including generator performance, magnetic flux compression processes, magnetic diffusion processes, high temperature superconductor (HTSC) material properties, plasmadynamic processes, detonation plasma expansion processes, magnetohydrodynamic instabilities, magnetic nozzle performance, and thrust production performance. Representative generator performance calculations based on a simplified skin layer formulation are presented as well as the results of exploratory small-scale laboratory experiments on magnetic flux diffusion in HTSC materials. In addition, planned follow-on scientific feasibility experiments are described which utilize high explosive detonations and high energy gas discharges to simulate the plasma conditions associated with thermonuclear micro-detonations.

Litchford, Ronald J.↗

30 years of semiconductor nanowire research: A Personal Journey

This project is about flux line pinning in high T c superconductors using columnar defects as the pinning centers. The basic idea is that linear structural defects can pin the flux lines within HTSCs so that their critical current density (the maximal current density that these HTSCs can carry with zero resistance) can be enhanced. The question is how to create such linear structural defects within crystalline cuprate thin films. Scientists have already successfully demonstrated the concept by irradiating HTSC crystals with high-energy ions at synchrotron beamline facilities. However, such heavy ion irradiation is practically not viable for large-scale processes. Finally, we reasoned that maybe we could introduce some sort of linear nanoscopic objects into HTSC to form a composite, and then these linear nanoscopic objects would serve as the magnetic flux line pinning centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kuramoto synchronization of quantum tunneling polarons for describing the dynamic structure in cuprate superconductors

A major open topic in cuprates is the interplay between the lattice and electronic dynamics and the importance of their coupling to the mechanism of high-temperature superconductivity (HTSC). As evidenced by extended x-ray absorption fine structure (EXAFS) experiments, anharmonic structural effects are correlated with the charge dynamics and the transition to a superconducting phase in different HTSC compounds. Here, in this paper, we describe how structural anharmonic effects can be coupled to electronic and lattice dynamics in cuprate systems by performing the exact diagonalization of a prototype anharmonic many-body Hamiltonian on a relevant 6-atom cluster and show that the EXAFS results can be understood as a Kuramoto synchronization transition between coupled internal quantum tunneling of polarons associated with the two-site distribution of the copper–apical oxygen (Cu-O ap ) pair in the dynamic structure. The transition is driven by the anharmonicity of the lattice vibrations and promotes the pumping of charge, initially stored at the apical oxygen reservoirs, into the copper-oxide plane. Simultaneously, a finite projection of the internal quantum tunneling polaron extends to the copper–planar oxygen (Cu-O pl ) pair. All these findings allow an interpretation based on an effective quantum-mechanical triple-well potential associated with the oxygen sites of the 6-atom cluster, which accurately represents the phase synchronization of apical oxygens and lattice-assisted charge transfer to the CuO 2 plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of the Crystal and Electronic Structures of the RBa{sub 2}Cu{sub 3}O{sub 6 + δ} Cuprates in Annealing

The crystal structure and the magnetic properties of the HTSC cuprates YBa{sub 2}Cu{sub 3}O{sub 6 + δ}, Y{sub 1 ‒} {sub x}Ca{sub x}Ba{sub 2}Cu{sub 3}O{sub 6 + δ}, and Nd{sub 1 +x}Ba{sub 2 –x}Cu{sub 3}O{sub 6 + δ} (x = 0.2) with the structure of a layered perovskite are studied. The well-known aging effect detected in these HTSC materials during storage under standard conditions, namely, an increase in their critical temperature T{sub c} and a decrease in lattice parameter c in time, is investigated. Using YBa{sub 2}Cu{sub 3}O{sub 6 + δ} as an example, we show that the dependence of c on the oxygen content undergoes the following changes in time: (1) the negative slope of the dependence with respect to axis δ increases and (2) nonlinearity appears and grows in time according to a quadratic law. The first type of changes is explained by an increase in the valence of copper ions, which is accompanied by a decrease in their radius. The second type is explained by the electrostatic interaction of structural CuO{sub 2} planes due to the accumulation of electron holes, which come from CuO{sub δ} planes, in them. The calculation of the second type of changes in parameter c in the YBa{sub 2}Cu{sub 3}O{sub 6 + δ} cuprate exhibits good quantitative agreement with the experimental data. The second-type changes in the Y{sub 1 –x}Ca{sub x}Ba{sub 2}Cu{sub 3}O{sub 6 + δ} compound (hole doping of CuO{sub 2} planes) turn out to be identical to those in YBa{sub 2}Cu{sub 3}O{sub 6 + δ}. However, the differently directed (in time) changes in lattice parameter c in Nd{sub 1 +x}Ba{sub 2 –x}Cu{sub 3}O{sub 6 + δ} indicate that the CuO{sub 2} planes in the neodymium cuprate are doped by electrons at the initial stage of aging. However, when these planes are saturated with holes in time, the type of doping changes from n to p without a noticeable change in the crystal structure, which has been considered to be impossible for layered cuprates to date.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

National Renewable Energy Laboratory's Hydrogen Technologies and Systems Center is Helping to Facilitate the Transition to a New Energy Future

The Hydrogen Technologies and Systems Center (HTSC) at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) uses a systems engineering and integration approach to hydrogen research and development to help the United States make the transition to a new energy future - a future built on diverse and abundant domestic renewable resources and integrated hydrogen systems.Research focuses on renewable hydrogen production, delivery, and storage; fuel cells and fuel cell manufacturing; technology validation; safety, codes, and standards; analysis; education; and market transformation. Hydrogen can be used in fuel cells to power vehicles and to provide electricity and heat for homes and offices. This flexibility, combined with our increasing demand for energy, opensthe door for hydrogen power systems. HTSC collaborates with DOE, other government agencies, industry, communities, universities, national laboratories, and other stakeholders to promote a clean and secure energy future.

08 HYDROGEN↗

High temperature superconducting magnetic energy storage for future NASA missions

Several NASA sponsored studies based on 'conventional' liquid helium temperature level superconductivity technology have concluded that superconducting magnetic energy storage has considerable potential for space applications. The advent of high temperature superconductivity (HTSC) may provide additional benefits over conventional superconductivity technology, making magnetic energy storage even more attractive. The proposed NASA space station is a possible candidate for the application of HTSC energy storage. Alternative energy storage technologies for this and other low Earth orbit missions are compared.

Faymon, Karl A.↗

Pinning, flow and plastic deformation of flux vortices in high T(sub c) superconductors

In high temperature superconductor (HTSC) materials the vortices are highly mobile and flexible. This is reflected in different models of melt of a vortex lattice. Another aspect of the problem is stressed: an easy nucleation and high mobility of dislocations in the vortex lattice. Some models of plastic deformation of vortex lattice are considered as a result of its interaction with a real crystal structure. Depinning is interpreted as yield of plastic flow is vortex medium. Effect of macroscopic defects in crystal structures (pores, inclusions, grain and domain boundaries) is being considered in detail. Available experimental facts on magnetization and a critical current in HTSC and conventional superconductors are discussed from the points of view of depinning to vortices vs. plastic flow of vortices vs. plastic flow of vortices medium.

Roytburd, A.↗