SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Using micro-machined silicon technology, an ultra-sensitive miniature accelerometer can be constructed which meets the requirements for microgravity experiments in the space environment. Such an accelerometer will have a full scale sensitivity of 10 -2 g, a resolution of 10 -8 g, low cross-axis sensitivity, and low temperature sensitivity. Mass of the device is approximately five grams and its footprint is 2 cm x 2 cm.
The plan to use an Earth gravity-assist maneuver to redirect the Giotto spacecraft toward Comet Grigg-Skjellerup (GS) for an encounter in July 1992, and 2 additional cometary opportunities are discussed. The first is an encounter with Comet Hartley-2 (H2) in Aug., 1991. The H2 is intrinsically brighter than GS and the encounter would take place much closer to the Earth. The other potential target is Comet du Toit-Hartley (DTH), which is of considerable scientific interest because it split into 2 pieces during its 1979 apparition. Ths GS and H2 missions are the most viable; DTH is eliminated because its aphelion of transfer orbit and Sun distance at encounter (both 1.2 AU) are incompatible with Giotto's degraded thermal insulation.
This paper presents, in viewgraph form, friction stir welding on the external tank of the Space Shuttle. The topics include: 1) Friction Stir Welding Process; 2) Implementation Status; and 3) Summary.
The goal of this program is to develop an improved capability for comparing various techniques for thermal management in the space station. The work involves three major tasks: Develop a Technology Options Data Base (Task 1); Complete Development of a Space Station Thermal Control Technology Assessment Program (Task 2); and Develop and Evaluate Emulation Models (Task 3).
The Stratospheric Aerosol and Gas Experiment on the International Space Station (SAGE III/ISS) is an occultation instrument that acquires measurements of aerosols and gases within the Earth’s stratosphere and upper troposphere. SAGE III/ISS provides level 2 solar species products for aerosol extinction (9 channels), nitrogen dioxide (NO2), ozone (O3), and water vapor (H2O). The level 2 products currently provide three O3 profiles based on differing retrievals. The first O3 profile is based on measurements at short wavelengths within the Hartley-Huggins band (MesO3), the second O3 profile is based on measurements made at visible wavelengths within the Chappius band (MLR O3), and the final profile is found using a more SAGE II like approach (AO3). The SAGE III/ISS also provides level 2 lunar species products for ozone (O3), nitrogen dioxide (NO2), and nitrogen trioxide (NO3). Version 5.3 of the SAGE III/ISS retrieval algorithm introduces improvements that affect the level 2 data products. The largest change to the solar algorithm is the implementation of disturbance monitoring package (DMP) corrections to improve pointing accuracy. The DMP is comprised of a miniature inertial measurement unit that measures rotation in inertial space using ring laser gyroscopes oriented about three orthogonal axes which can be used to correct pointing errors caused by mechanical disturbances. A major change common to solar and lunar algorithms is meteorological input from the coarser 42 level Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) model data to the 72 level MERRA-2 model data. The final major change involves improving the automated quality assurance (QA) algorithm to recover events that were withheld from the public release because differences between the AO3 and MLR O3 for some events after the eruption of Tonga–Hunga Haʻapai. Other changes for v5.3 include minor bug fixes as well as restoration of some data quality flags that were removed in v5.21. This presentation presents the impacts of these changes as well as overall observations of interest from v5.3 level 2 data products.
The Stratospheric Aerosol and Gas Experiment on the International Space Station (SAGE III/ISS) is an occultation instrument that acquires measurements of aerosols and gases within the Earth’s stratosphere and upper troposphere. SAGE III/ISS provides level 2 solar species products for aerosol extinction (9 channels), nitrogen dioxide (NO2), ozone (O3), and water vapor (H2O). The level 2 products currently provide three O3 profiles based on differing retrievals. The first O3 profile is based on measurements at short wavelengths within the Hartley-Huggins band (MesO3), the second O3 profile is based on measurements made at visible wavelengths within the Chappius band (MLR O3), and the final profile is found using a more SAGE II like approach (AO3). The SAGE III/ISS also provides level 2 lunar species products for ozone (O3), nitrogen dioxide (NO2), and nitrogen trioxide (NO3). Version 5.3 of the SAGE III/ISS retrieval algorithm introduces improvements that affect the level 2 data products. The largest change to the solar algorithm is the implementation of disturbance monitoring package (DMP) corrections to improve pointing accuracy. The DMP is comprised of a miniature inertial measurement unit that measures rotation in inertial space using ring laser gyroscopes oriented about three orthogonal axes which can be used to correct pointing errors caused by mechanical disturbances. A major change common to solar and lunar algorithms is meteorological input from the coarser 42 level Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) model data to the 72 level MERRA-2 model data. The final major change involves improving the automated quality assurance (QA) algorithm to recover events that were withheld from the public release because differences between the AO3 and MLR O3 for some events after the eruption of Tonga–Hunga Haʻapai. Other changes for v5.3 include minor bug fixes as well as restoration of some data quality flags that were removed in v5.21. This presentation presents the impacts of these changes as well as overall observations of interest from v5.3 level 2 data products.
Limited speech recognition system for computer voice link
During the past year three periodic comets were recovered. They were Tsuchinshan 2, Whipple, and Daniel. Follow up positions on four newly discovered comets appeared on IAU cards: Machholz, Hartley, Maury, and Shoemaker 3. Halley was captured shortly after its 1985 conjunction and a set of exposures in late summer was one of the earliest showing tail development. A variety of interesting asteroids were also captured.
A core drilled near Wolhaarkop in Griqualand West, South Africa, intersected highly oxidized Kuruman Iron Formation below red beds of the Gamagara Formation. The lateral equivalents of the Kuruman Iron Formation in this drill hole consist largely of siderite, ankerite, magnetite, greenalite, and quartz. The oxidation of the Kuruman Iron Formation in WOL 2 occurred almost certainly during weathering prior to the deposition of the Gamagara Formation. The date of this weathering episode is bracketed between about 2.2 and 1.9 bybp by the age of the Ongeluk lavas in the Transvaal sequence below the unconformity and by the age of the Hartley lavas in the Olifantshoek Group above the unconformity. The ratio of iron to SiO2 in the several facies of the weathered Kuruman Iron Formation in WOL 2 is nearly the same as that in their unweathered equivalents. Since SiO2 loss during weathering was almost certainly minor, the similarity of the Fe/SiO2 ratio in the weathered and unweathered BIF indicates that nearly all the "FeO" in the Kuruman Iron Formation was oxidized and retained as FeO3 during weathering. Such a high degree of iron retention is best explained by an O2 content of the atmosphere > or = 0.03 atm at the time of weathering. Such an O2 pressure is very much greater than that suggested by the composition of paleosols developed on basalt > or = 2.2 bybp but is consistent with the highly oxidized nature of the 1.85 by Flin Flon paleosol. The new data suggest that PO2 rose dramatically from about 1 percent PAL (present atmospheric level) to > or = 15 percent PAL between 2.2 and 1.9 bybp.
The Mariner 9 UV spectrometer scanned from 2100 to 3500 Angstroms in one of its two spectral channels every 3 seconds with a spectral resolution of 15 Angstroms and an effective field-of-view of approximately 300 km(exp 2). The only gaseous absorption in the 2000 to 3000 Angstrom region was assumed to come from the Hartley band system of ozone, and therefore the amount of ozone was inferred by fitting this absorption feature with laboratory data of ozone absorption. Mars O3 as inferred from these spectra shows strong seasonal and latitudinal variation, with column abundances ranging from 0.2 microns at equatorial latitudes to 60 microns over the northern winter polar latitudes. The detectability limit of the spectrometer was approximately 3 microns. I use a radiative transfer model based on the discrete ordinate method to calculate synthetic radiance spectra. When typical amounts of dust and cloud are present, significant underestimation of O3 occurs. A factor of 3 times as much O3 is needed to generate the same spectrum for cloudy, dusty atmospheres as for a clear atmosphere. If the scattering properties of Martian clouds and dust were well known, then their appearance would not be a problem, as a model would be capable of retrieving the O3 abundance. However, these properties are not well known, which raises doubts about the effectiveness of the current UV spectroscopy technique used to measure O3. Spatial and temporal variability in temperature and water vapor have been claimed to account for the scatter of the data points. However, water vapor is a small source of odd hydrogen in the winter polar atmosphere, and may not account for most of the variability. Masking by clouds and dust may also account for some of the observed O3 variability, because the nature and opacity of the clouds and dust in the polar hood change dramatically in latitude and even on a day-to-day basis. As the maximum O3 abundance resides near the surface, spacecraft must be able to observe through the entire cloud and dust abundance in order to actually see the total O3 column abundance. If reflectance spectroscopy is used, as on Mariner 9, then the cloud and the airborne dust must be traversed twice; first by the incoming solar flux down to the surface, and then once again upon reflection from the surface out to the spacecraft.
Gray-scale x-ray lithography is undergoing development as a technique for fabricating blazed diffraction gratings. As such, gray-scale x-ray lithography now complements such other grating-fabrication techniques as mechanical ruling, holography, ion etching, laser ablation, laser writing, and electron-beam lithography. Each of these techniques offers advantages and disadvantages for implementing specific grating designs; no single one of these techniques can satisfy the design requirements for all applications. Gray-scale x-ray lithography is expected to be advantageous for making gratings on steeper substrates than those that can be made by electron-beam lithography. This technique is not limited to sawtooth groove profiles and flat substrates: various groove profiles can be generated on arbitrarily shaped (including highly curved) substrates with the same ease as sawtooth profiles can be generated on flat substrates. Moreover, the gratings fabricated by this technique can be made free of ghosts (spurious diffraction components attributable to small spurious periodicities in the locations of grooves). The first step in gray-scale x-ray lithography is to conformally coat a substrate with a suitable photoresist. An x-ray mask (see Figure 1) is generated, placed between the substrate and a source of collimated x-rays, and scanned over the substrate so as to create a spatial modulation in the exposure of the photoresist. Development of the exposed photoresist results in a surface corrugation that corresponds to the spatial modulation and that defines the grating surface. The grating pattern is generated by scanning an appropriately shaped x-ray area mask along the substrate. The mask example of Figure 1 would generate a blazed grating profile when scanned in the perpendicular direction at constant speed, assuming the photoresist responds linearly to incident radiation. If the resist response is nonlinear, then the mask shape can be modified to account for the nonlinearity and produce a desired groove profile. An example of grating grooves generated by this technique is shown in Figure 2. A maximum relative efficiency of 88 percent has been demonstrated.
The scaling of metabolic heat production rate on body mass is investigated for five species of small laboratory mammal in order to define selection of animals of metabolic rates and size range appropriate for the measurement of changes in the scaling relationship upon exposure to weightlessness in Shuttle/Spacelab experiment. Metabolic rates were measured according to oxygen consumption and carbon dioxide production for individual male and female Swiss-Webster mice, Syrian hamsters, Simonsen albino rats, Hartley guinea pigs and New Zealand white rabbits, which range in mass from 0.05 to 5 kg mature body size, at ages of 1, 2, 3, 5, 8, 12, 18 and 24 months. The metabolic intensity, defined as the heat produced per hour per kg body mass, is found to decrease dramatically with age until the animals are 6 to 8 months old, with little or no sex difference. When plotted on a logarithmic graph, the relation of metabolic rate to total body mass is found to obey a power law of index 0.676, which differs significantly from the classical value of 0.75. When the values for the mice are removed, however, an index of 0.749 is obtained. It is thus proposed that six male animals, 8 months of age, of each of the four remaining species be used to study the effects of gravitational loading on the metabolic energy requirements of terrestrial animals.
Deep Space Network support activities for Apollo 9 through 13 flights and associated equipment
The National Aeronautics and Space Administration is currently funding research into the design of a Mars rover vehicle. This unmanned rover will be used to explore a number of scientific and geologic sites on the Martian surface. Since the rover can not be driven from Earth in real-time, due to lengthy communication time delays, a locomotion strategy that optimizes vehicle range and minimizes potential risk must be developed. In order to assess the degree of on-board artificial intelligence (AI) required for a rover to carry out its' mission, researchers conducted an experiment to define a no AI baseline. In the experiment 24 subjects, divided into stereo and monoscopic groups, were shown video snapshots of four terrain scenes. The subjects' task was to choose a suitable path for the vehicle through each of the four scenes. Paths were scored based on distance travelled and hazard avoidance. Study results are presented with respect to: (1) risk versus range; (2) stereo versus monocular video; (3) vehicle camera height; and (4) camera field-of-view.
We briefly review current knowledge and pinpoint some of the major areas of uncertainty for the following fundamental processes: (1) convection, condensation nuclei, and cloud formation; (2) oceanic circulation and its coupling to the atmosphere and cryosphere; (3) land surface hydrology and hydrology-vegetation coupling; (4) biogeochemistry of greenhouse gases; and (5) upper atmospheric chemistry and circulation.
Weld process development are: (1) Execute a two-phased design of experiment (DOE) approach: process DOE to establish rotation and travel speeds and forge load;set-up DOE to establish allowable gap and centerline offset. (2) Determine the effect of process parameters on strength and weld quality: room and -320 deg F tensile testing; metalllurgical and NDE evaluation. (3) Weld quality goals: visual and radiographic acceptable; room temperature ultimate strength.
NASA's Deep Impact mission ended successfully in 2005 after an impact and close flyby of the comet 9P/Tempel-1. The Flyby spacecraft was placed in hibernation and was left to orbit the sun. In 2007, engineers at the Jet Propulsion Laboratory brought the spacecraft out of hibernation and successfully performed two additional missions. These missions were EPOCh, Extra-solar Planetary Observation and Characterization, a photometric investigation of transiting exo-planets, and DIXI, Deep Impact eXtended Investigation, which maneuvered the Flyby spacecraft towards a close encounter with the comet 103P/Hartley- 2 on 4 November 2010. The names of these two scientific investigations combine to form the overarching mission's name, EPOXI. The encounter with 103P/Hartley-2 was vastly different from the prime mission's encounter with 9P/Tempel-1. The geometry of encounter was nearly 180 ? different and 103P/Hartley-2 was approximately one-quarter the size of 9P/Tempel-1. Mission operations for the comet flyby were broken into three phases: a) Approach, b) Encounter, and c) Departure. This paper will focus on the approach phase of the comet encounter. It will discuss the strategies used to decrease both cost and risk while maximizing science return and some of the challenges experienced during operations.
The main findings of this research project have been the following: (1) there is a significant feedback from the stratosphere on tropospheric dynamics, and (2) a detailed analysis of the interaction between tropical and polar wave breaking in controlling stratospheric mixing. Two papers are were written and are included. The first paper is titled, "A New Perspective on the Dynamical Link Between the Stratosphere and Troposphere." Atmospheric processes of tropospheric origin can perturb the stratosphere, but direct feedback in the opposite direction is usually assumed to be negligible, despite the troposphere's sensitivity to changes in the release of wave activity into the stratosphere. Here, however, we present evidence that such a feedback exists and can be significant. We find that if the wintertime Arctic polar stratospheric vortex is distorted, either by waves propagating upward from the troposphere or by eastward-travelling stratospheric waves, then there is a concomitant redistribution of stratospheric potential vorticity that induces perturbations in key meteorological fields in the upper troposphere. The feedback is large despite the much greater mass of the troposphere: it can account for up to half of the geopotential height anomaly at the tropopause. Although the relative strength of the feedback is partly due to a cancellation between contributions to these anomalies from lower altitudes, our results imply that stratospheric dynamics and its feedback on the troposphere are more significant for climate modelling and data assimilation than was previously assumed. The second article is titled "Diagnosing the Polar Excitation of Subtropical Waves in the Stratosphere". The poleward migration of planetary scale tongues of subtropical air has often been associated with intense polar vortex disturbances in the stratosphere. This question of vortex influence is reexamined from a potential vorticity (PV) perspective. Anomalous geopotential height and wind fields associated solely with vortex PV anomalies are derived and their impact on the stratospheric subtropical circulation is evaluated. Combined PV inversion and Contour Advection (CA) calculations indicate that transient large scale disturbances of the polar vortex do have a far reaching impact that extends beyond the midlatitude surf zone all the way to the subtropics. This vortex influence is clearly non-local so that even simple wave 2 distortions that leave the vortex well confined within the midlatitudes are observed to excite subtropical waves. Treating subtropical PV as active tracers also showed that upon entrainment, these large scale tongues of low PV air also influenced the dynamics of their own poleward migration.