Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Resolutions Optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

High resolution optical and UV observations of the centers of NGC 1316 and NGC 3998 with the Hubble Space Telescope

B and UV high-resolution images obtained with Hubble Space Telescope (HST) Faint Object Camera reveal centrally increasing surface brightness and UV-bright point sources at the nuclei of the early-type galaxies NGC 1316 and NGC 3998. Model fitting of the surface brightness distribution dose not exclude a central flattening, which could however be the result of extinction and/or of improper evaluation of the point-source component. The present data, while not requiring the presence of central massive black holes in these two galaxies, make them possible candidates. Follow-up work is needed to study this point further. The presence of unresolved nuclei gives model-dependent support to this quest, if these sources are due to small Active Galactic Nuclei (AGN). These UV-bright sources could belong to the low-luminosity end of active galactic nuclear emission.

Fabbiano, G.↗

Mirror Tech Days (11/02/2021)Next Generation Astronomical X-ray Optics:High Resolution, Light Weight, & Low Cost

We have demonstrated the basic elements of a technology to make high-resolution, light-weight, and low-cost X-ray optics. We continue to advance this technology to meet all requirements of Lynx: performance and programmatic. This technology uses only commercially available equipment and materials. It piggybacks on the semiconductor industry, avoiding obsolescence and ensuring continual advance. This technology can be used for missions of all sizes: sub-orbital, SmallSats, Pioneers, SMEX, MIDEX, Probes, and Flagships(Lynx).

X-Ray↗

USING HIGH-RESOLUTION OPTICAL SPECTRA TO MEASURE INTRINSIC PROPERTIES OF LOW-MASS STARS: NEW PROPERTIES FOR KOI-314 AND GJ 3470

We construct high signal-to-noise 'template' spectra by co-adding hundreds of spectra of nearby dwarfs spanning K7 to M4, taken with Keck/HIRES as part of the California Planet Search. We identify several spectral regions in the visible (370-800 nm) that are sensitive to the stellar luminosity and metallicity. We use these regions to develop a spectral calibration method to measure the mass, metallicity, and distance of low-mass stars, without the requirement of geometric parallaxes. Testing our method on a sample of nearby M dwarfs, we show that we can reproduce stellar masses to about 8%-10%, metallicity to {approx}0.15 dex, and distance to 11%. We were able to make use of HIRES spectra obtained as part of the radial velocity monitoring of the star KOI-314 to derive a new mass estimate of 0.57 {+-} 0.05 M{sub Sun }, a radius of 0.54 {+-} 0.05 R{sub Sun }, a metallicity, [Fe/H], of -0.28 {+-} 0.10, and a distance of 66.5 {+-} 7.3 pc. Using HARPS archival data and combining our spectral method with constraints from transit observations, we are also able to derive the stellar properties of GJ 3470, a transiting planet hosting M dwarf. We estimate a mass of 0.53 {+-} 0.05 M{sub Sun }, a radius of 0.50 {+-} 0.05 R{sub Sun }, a metallicity, [Fe/H], of 0.12 {+-} 0.12, and a distance of 29.9{+-}{sub 3.4}{sup 3.7} pc.

79 ASTRONOMY AND ASTROPHYSICS↗

High-resolution optical telescope for ultraviolet /UV/ radiation field

Design techniques are discussed for all-reflecting optics from first-order system considerations and applications currently utilized in the field of astronomical optics. The solution of the Dall-Karkham design problem is described, showing the advantage of inexpensive construction as compared with higher order surfaces. The design process reported here is a F/5 collecting system which quickly mates directly with the spectrometer; it is capable of achieving desired high resolution and sensitivity requirements. The theoretical limit of aberration tolerances is achieved with less than 1/8 of a wavelength at final focus (OPD). The design of spectrometer for ultra-violet (UV) radiation and its mechanism is included in this study.

Karayan, W. W.↗

Identification and Analysis of Backwater Nursery Habitats in the Middle Green River, Utah, during 2014, 2017, and 2018 Using High-Resolution Optical Remotely Sensed Imagery

Low-velocity channel-margin habitats, known as backwaters, serve as important nursery habitats for the endangered Colorado pikeminnow (Ptychocheilus lucius) in the middle Green River between Jensen and Ouray, Utah. The backwater synthesis report for the 1987–2013 period (Grippo et al. 2017) reported a decreased number of backwaters per river mile (RM) and an increased mean backwater size across the middle Green River. Information about backwaters is critical for understanding habitat characteristics that are important for Colorado pikeminnow recruitment. The goal of this study was to determine backwater number and size in the middle Green River using high-resolution imagery for 2018 to add to our understanding of long-term trends of backwater habitat availability across the reach. For comparative analysis of backwater habitats between 2004 and 2018, information for 2004, 2006, 2013, 2014 and 2017 from our previous studies was also utilized (Grippo et al. 2017; Hamada et al. 2017, 2021, and in review). Across the 2004, 2006, 2013, 2014, 2017, and 2018 study years, mean daily flow at the Jensen gage during image collection ranged from 1,220 cfs (2004) to 2,940 cfs (2014), which was approximately 140% greater in 2014 than in 2004. The number of delineated backwaters ranged from 88 (2013) to 245 (2017), and total backwater area ranged from 118,938 m 2 (2006) to 209,611 m 2 (2014). Mean backwater size ranged from 822 m 2 (2017) to 1,508 m 2 (2018), but there was considerable variability in backwater size for each of the study years. Backwater areas differed significantly among the study years based on a Kruskal-Wallis Rank Sum test ( P < 0.001). Pairwise Wilcoxon tests indicated that the median backwater areas in 2017 and 2014 were significantly lower than in the other sample years ( P ≤ 0.05), even though these years had the highest total backwater area. 2018 had the greatest median backwater area, although the distribution of backwater area values was not statistically different from backwater areas measured in 2013 ( P > 0.05). These two years also had the lowest maximum backwater area values among all sample years. The distribution of backwater area values was not significantly different ( P > 0.05) among the 2006, 2004, and 2013 sample years.

54 ENVIRONMENTAL SCIENCES↗

A high-resolution optical survey of interstellar absorption lines toward globular clusters and extragalactic objects. II - Further data

A status report is given on an ongoing survey of narrow-line, visual absorption components, which has been expanded to include lines of sight to the 3C 273 quasar, the nucleus of M87, and the NGC 1851, NGC 2808, and 47 Tuc globular cluster cores. The number density of components of the halo is calculated to lie between one-third and one per 100 kpc, though with substantial uncertainty. This estimate is held to be consistent with the galactic halo interpretation of the origin of high column density, quasar absorption-line systems.

Songaila, A.↗

High-resolution optical micro-spectroscopy extending from the near-infrared to the vacuum-ultraviolet

Optical characterization of small samples over a wide spectral range with rapid data acquisition is essential for the analysis of many material systems, such as 2D van der Waals layers and their heterostructures. In this paper, we present the design and implementation of a tabletop micro-spectroscopy system covering the near-infrared to the vacuum-ultraviolet (1.2 eV–6.8 eV or ~1.0 μm to 185 nm) using mostly off-the-shelf components. It can measure highly reproducible local reflectance spectra with a total integration time of a few minutes and a full-width-half-maximum spot size of 2.7 by 5.6 μm. For precise positioning, the design also allows simultaneous monitoring of the measurement location and the wide-field image of the sample. We demonstrate ultra-broadband reflectance spectra of exfoliated thin flakes of several wide-gap 2D materials, including ZnPS 3 , hexagonal BN, and Ca(OH) 2 .

47 OTHER INSTRUMENTATION↗

High pulse rate high resolution optical radar system

The system is composed of an optical cavity with a laser and a mode locking means to build up an optical pulse. An optical switch is also provided within the cavity to convert the polarization of the optical pulse generated within the cavity. The optical switch comprises an electro-optical crystal driven by a time delayed driver circuit which is triggered by a coincident signal made from an optical pulse signal and a gating pulse signal. The converted optical pulse strikes a polarization sensitive prism and is deflected out of the cavity toward the pending target in the form of a pulse containing most of the optical energy generated by the laser in the pulse build-up period. After striking the target, the reflected energy is picked up by a transceiver with the total travel time of the pulse being recorded.

Goss, W. C.↗

High-resolution optical and ultraviolet absorption-line studies of interstellar gas

Recent progress in the characterization of the interstellar medium (ISM) by means of optical and UV spectral data is summarized. The gas is studied by focusing on background stars whose spectra can be accurately modeled to provide the light source for the absorption-line scans. The capabilities of earth- and space-based instruments which have been and are used for the surveys are delineated. The distributions of diffuse gas densities and characteristics of the cold, warm and hot gas in the Galaxy are described in terms of the elemental abundances, kinetics and distributions of the gas. Particular note is taken of gas in the solar neighborhood and around SNR, and of absorption-line data of cosmological significance.

Cowie, Lennox L.↗

High-Resolution Optical and Near-Infrared Imaging of Young Circumstellar Disks

In the past five years, observations at optical and near-infrared wavelengths obtained with the Hubble Space Telescope and ground-based adaptive optics have provided the first well-resolved images of young circumstellar disks which may form planetary systems. We review these two observational techniques and highlight their results by presenting prototype examples of disks imaged in the Taurus-Auriga and Orion star-forming regions. As appropriate, we discuss the disk parameters that may be typically derived from the observations, as well as the implications that the observations may have on our understanding of, for example, the role of the ambient environment in shaping the disk evolution. We end with a brief summary of the prospects for future improvements in space- and ground-based optical/IR imaging techniques, and how they may impact disk studies.

McCaughrean, Mark↗

Determining True Sensor Spatial Resolution of Very High Resolution Optical Imagery

Some satellite data is delivered in images with gridded pixels. This gridded pixel size is often assumed to be the spatial resolution of the satellite sensor; however, this is not always the case. An image can be grided to any arbitrary pixel size, but the sensor resolution will remain constant. For example, an image with a pixel grid size much smaller than the sensor resolution will appear blurry along what should be sharp transitions. This discrepancy between an image’s pixel size and true sensor spatial resolution can be the source of much confusion and even misinformation among data users, which may lead them to waste time and resources on using images that do not suit their spatial resolution needs. This presentation will highlight our evaluation of the true spatial resolution of various government and commercial images in the pixel size range of 0.3 m to 60 m. Images evaluated include ESA’s Sentinel-2 (60 m, 20 m, 10 m pixels), USGS’s Landsat 8/9 (30 m & 15 m pixels), Planet’s SuperDoves (3 m pixels), BlackSky’s Globals (~1 m pixels), and the optical bands of Maxar’s WorldView-2 (2.4 m – 0.41 m pixels) and WorldView-3 (1.38 m – 0.31 m pixels). Our evaluation of true sensor spatial resolution, or ‘footprint size’ is based on the sensor’s line spread function (LSF). We calculate the width at half the height of the LSF to find the full width at half maximum (FWHM). The FWHM is how we report sensor spatial resolution. Different objects are examined for constructing the LSF depending on the sensor spatial resolution. Coarser resolution sensors in this evaluation such as Sentinel-2 and Landsat 8/9 are examined at bridges over a dark water background. The bright bridge acts as a line impulse, giving a sensor’s line spread function (LSF) in one direction. Additionally, we simulate the impacts of bridge width on the apparent LSF to obtain a true LSF without the effects of bridge width for these sensors. Finer resolution sensors will image the irregularities in bridges such as trusses, sidewalks, and in some cases painted lines, interfering with the LSF construction. Instead, these sensors are evaluated at large (60 m – 140 m) black and white checkerboards known as Cal/Val sites. At these locations, the image’s transition from black to white is extracted as an edge spread function (ESF). We calculate the derivative of this ESF to obtain the sensor’s LSF. From there, we find the FWHM as we do for the coarser resolution images. With the FWHM and pixel size, we determine how over- or under-sampled the images are. When the ratio of a sensor’s spatial resolution and the gridded image’s pixel size is less than 1, the image is considered under-sampled. In this case, each pixel’s information is unique but only a portion of that pixel’s ground area has been measured. On the other side, if the ratio is greater than 1, the image is considered over-sampled. That is, each pixel’s information is sourced from within the ground extent of the pixel and some extent outside additionally. We will show the true spatial resolution and the extent of over-/under-sampling in the imagery from ESA’s Sentinel-2 (60 m, 20 m, 10 m pixels), USGS’s Landsat 8/9 (30 m & 15 m pixels), Planet’s SuperDoves (3 m pixels), BlackSky’s Globals (~1 m pixels), and the optical bands of Maxar’s WorldView-2 (2.4 m – 0.41 m pixels) and WorldView-3 (1.38 m – 0.31 m pixels).

Alana Semple↗