SEARCH · Search NASA

Results for “High-Rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1973

An ultrahigh rate digital tape recorder for spacecraft applications

Spaceborne digital recorders must satisfy the conflicting requirements of maximum data storage of high-rate data (particularly for high-resolution sensor data) and a long life with high reliability (meaning rugged design and moderate head-to-tape speeds). The multitrack longitudinal (fixed head) recorder can successfully resolve this conflict and satisfy both requirements. An evolutionary machine is described which was originally designed to store and reproduce 30 minutes of 39.9-Mb/sec sensor data, for mission lives on the order of one year; newer designs have surpassed these parameters by significant amounts.

Thompson, C. R.↗

NASA NTRS1976

Maximum likelihood convolutional decoding (MCD) performance due to system losses

A model for predicting the computational performance of a maximum likelihood convolutional decoder (MCD) operating in a noisy carrier reference environment is described. This model is used to develop a subroutine that will be utilized by the Telemetry Analysis Program to compute the MCD bit error rate. When this computational model is averaged over noisy reference phase errors using a high-rate interpolation scheme, the results are found to agree quite favorably with experimental measurements.

Webster, L.↗

NASA NTRS1976

A bandwidth-compressive modulation system

The phrase 'bandwidth-compressive modulation' means that the compression is achieved not by removing redundancy from the data (data compression), but rather by modulating the carrier phase and amplitude with blocks of data bits. The modulation described here is quadrature amplitude shift keying (QASK), a logical extension of quadrature phase shift keying, (QPSK, or quadriphase). QASK is a cost-effective form of combined phase-and-amplitude modulation. That is, n-bit QASK, like most phase-amplitude forms of modulation, requires considerably less transmitter power than comparably performing n-PSK, while among the class of all n-bit phase-modulation types, n-bit QASK performs nearly optimally but requires the least circuit complexity. A simple, unique microwave transmitter is described which provides high-rate QASK modulation with 4:1 bandwidth compression. A suppressed carrier multiple-loop QASK receiver provides the necessary phase tracking, automatic gain control (AGC), and symbol timing.

Smith, J. G.↗

NASA NTRS1977

Closed-cell foams produced from sputter-deposited aluminum

Sputter deposited aluminum containing argon was melted to produce foam, both in the earth's gravitational field and in a zero-gravity space environment. Experiments leading to trapping of up to 270 ppm argon sputtering gas in pure aluminum during high-rate dc triode sputter deposition are discussed. Conduct of the melting experiments and design of the furnace used are described. Metallography; an analysis of bubble size, distribution, and morphology; and a preliminary description of the kinetics are also presented.

Patten, J. W.↗

NASA NTRS1978

Life testing of Mallory cells

Tests were performed to assess the effects of storage time, storage temperature, vibration, discharge rate and temperature, and capacity of high-rate, D size, lithium sulfur dioxide cells. Data from these tests are discussed.

Dugan, D.↗

NASA NTRS1978

Applications and safety data

A general overview of activities involving lithium batteries, which shows the various applications and data that were performed for numerous industry and government sponsors is presented. Brief discussions on electrochemical criteria selection, and typical storage and performance data obtained from three systems being developed are presented. Current safety work being done on high-rate, D, SO2 cells is also discussed. Three chemistries were developed and are discussed: lithium vanadium pentoxide, lithium sulfur dioxide, and lithium thionyl chloride. Storage, performance and safety data are graphically presented.

Berlangieri, N. J.↗

NASA NTRS1978

Safety characteristics of the lithium SO2 system

Extensive tests were conducted to quantitatively define the safety characteristics of high-rate SO2 multicell batteries under various discharge and temperature profiles, which closely simulated actual field-use conditions. The resulting behavior patters of the multicell batteries and the corrective action which can be implemented to minimize or prevent hazardous battery performance are briefly summarized.

Watson, T.↗

NASA NTRS1982

A scheme for tracking and pointing at small celestial bodies during high velocity encounters

A scheme has been developed and verified for closed-loop tracking and pointing space-borne science instruments at small celestial bodies, such as comets and asteroids, during high velocity encounters. To overcome ephemeris uncertainties for these bodies, the scheme involves sequential estimation of flyby model parameters. The design consists of a two-axis gimballed platform mounted on a three-axis stabilized spacecraft. A platform-mounted optical tracker provides closed-loop target measurements and precision micro-step actuators enable high-rate platform slewing. For comet missions which involve dust particle impact disturbances, a dual-mode attitude control scheme is presented for minimizing transient response time.

Burdick, G. M.↗

NASA NTRS1982

Space platform accommodations

The results of studies performed at NASA of five space platform design reference missions (DRM) are presented. The DRM's were planned in an effort to eliminate problems, rather than to enhance optimization. A diagram of each payload is included, and the space platform concept is presented with the most important features being a continuous total power supply of 12.5 kW to the payloads at 30 and/or 120 Vdc regulated, a high-rate multiplexer with a total output of 48 Mbps, and and a thermal control system capable of dissipating the platform power output at payload fluid temperatures of 0 C to 3 C. Payload interface requirements were analyzed and appropriate integration hardware was added. Payload viewing characteristics are considered, and resource use is discussed. It is concluded that, in payload applications, efficient use of STS transportation and the platform must be considered.

Bailey, W.↗

NASA NTRS1984

Error-trellis Syndrome Decoding Techniques for Convolutional Codes

An error-trellis syndrome decoding technique for convolutional codes is developed. This algorithm is then applied to the entire class of systematic convolutional codes and to the high-rate, Wyner-Ash convolutional codes. A special example of the one-error-correcting Wyner-Ash code, a rate 3/4 code, is treated. The error-trellis syndrome decoding method applied to this example shows in detail how much more efficient syndrome decoding is than Viterbi decoding if applied to the same problem. For standard Viterbi decoding, 64 states are required, whereas in the example only 7 states are needed. Also, within the 7 states required for decoding, many fewer transitions are needed between the states.

Reed, I. S.↗

NASA NTRS1985

Error-trellis syndrome decoding techniques for convolutional codes

An error-trellis syndrome decoding technique for convolutional codes is developed. This algorithm is then applied to the entire class of systematic convolutional codes and to the high-rate, Wyner-Ash convolutional codes. A special example of the one-error-correcting Wyner-Ash code, a rate 3/4 code, is treated. The error-trellis syndrome decoding method applied to this example shows in detail how much more efficient syndrome decordig is than Viterbi decoding if applied to the same problem. For standard Viterbi decoding, 64 states are required, whereas in the example only 7 states are needed. Also, within the 7 states required for decoding, many fewer transitions are needed between the states.

Reed, I. S.↗

NASA NTRS1985

Radiofrequency testing of satellite segment of simulated 30/20 GHz satellite communications system

A laboratory communications system has been developed that can serve as a test bed for the evaluation of advanced microwave (30/20 GHz) components produced under NASA technology programs. The system will ultimately permit the transmission of a stream of high-rate (220 Mbps) digital data from the originating user, through a ground terminal, through a hardware-simulated satellite, to a receiving ground station, to the receiving user. This report contains the results of radiofrequency testing of the satellite portion of that system. Data presented include output spurious responses, attainable signal-to-noise ratios, a baseline power budget, usable frequency bands, phase and amplitude response data for each of the frequency bands, and the effects of power level variation.

Leonard, R. F.↗

NASA NTRS1986

Origin and evolution of X-ray binaries in globular clusters

The theoretical model developed by Grindlay (1984 and 1985) and Grindlay and Hertz (1985) to explain the relative numbers of low-luminosity and high-luminosity X-ray sources in Galactic globular clusters is briefly characterized, and the relevant observational evidence is summarized. In the model, high-rate mass transfer onto white dwarfs in about 1 percent of the low-luminosity binary sources produces neutron stars, which then form compact high-luminosity X-ray binaries (by tidal capture in the dense cluster cores); these in turn evolve into hierarchical triple systems. Evidence considered includes observations of the high-luminosity giant-fed X-ray binary in M 15, the results of searches for CVs in globulars, comparisons of X-ray-binary and host-globular evolution, and indications that GX 17 + 2 is a bound triple.

Grindlay, Jonathan E.↗

NASA NTRS1986

The engineering of the Voyager 2 mission to Uranus

The engineers of the Voyager 2 mission to Uranus had to deal with dwindling consumables, navigational challenges unique to the Uranian system, low light-level imaging, increasing communications problems, and failed equipment onboard the spacecraft, each of which could affect the success of the mission. The techniques for coping with each of these factors are discussed in detail. For instance, steadying of the spacecraft, achieved by cancelling the momentum change imparted to it by high-rate operations of the digital tape recorder, enhanced the data quality from several instruments, particularly the cameras. A careful power management scheme made it possible to conduct a successful radio occultation experiment which yielded detailed information on the Uranian atmospheric structure, including temperature and composition. A unique picture of the back-lit ring system was obtained.

Laeser, Richard P.↗

NASA NTRS1986

Plasticity analysis of wear phenomena as an aid in the development of abradable materials

Plastic deformation accompanying the wear process in fully dense and porous metals was studied in order to develop more abradable gas path seal material systems for turbine engine applications. The finite element method was used to model high-rate viscoplastic deformation in the vicinity of a moving contact. Techniques were developed for studying such deformation in both solid (fully dense) and porous metals. Results of the analysis were verified by comparison with experimental data obtained using a pendulum-type rub test apparatus and a pin-on-disk sliding wear tester. It was found that the near-surface plastic deformation in fully dense solids was different from that for porous materials because of the compressibility of the latter. Both types of materials exhibit deformation features which can be taken advantage of in the design of more abradable material systems.

Kennedy, F. E., Jr.↗

NASA NTRS1987

Technology - The basis for the past, the key to the future

The relationship between new technology and space missions, and the objectives of the Civil Space Technology Initiative (CSTI) are studied. The CSTI is concerned with technologies for safe and efficient access to space, earth-orbiting operations, and future science missions. The initiative focuses on research in the areas of propulsion, vehicles, information systems, large space structures and their control, power, and automation and robotics. Consideration is given to the development of high-performance engines for next-generation vehicles, booster technology for hybrid and pressure-fed propulsion systems, and a space OTV based on the aerobrake concept. Research involved with the application of automation and robotics to earth-orbiting operations are discussed. The control of flexible structure flight experiment, the use of nuclear systems for space propulsion, and the development of sensor devices and high-rate, high-capacity data systems are examined.

Harris, Leonard A.↗

NASA NTRS1993

Asynchronous transfer mode link performance over ground networks

The results of an experiment to determine the feasibility of using asynchronous transfer mode (ATM) technology to support advanced spacecraft missions that require high-rate ground communications and, in particular, full-motion video are reported. Potential nodes in such a ground network include Deep Space Network (DSN) antenna stations, the Jet Propulsion Laboratory, and a set of national and international end users. The experiment simulated a lunar microrover, lunar lander, the DSN ground communications system, and distributed science users. The users were equipped with video-capable workstations. A key feature was an optical fiber link between two high-performance workstations equipped with ATM interfaces. Video was also transmitted through JPL's institutional network to a user 8 km from the experiment. Variations in video depending on the networks and computers were observed, the results are reported.

Chow, E. T.↗

NASA NTRS2026

Manufacturing Process Development of a Carbon Fiber Reinforced Polymer Composite Shaft for Electric Motors

Electric aircraft applications require electric motors with increased specific power and efficiency. Composite structural components in motors are a potential solution for reducing motor mass, reducing magnetic losses, and limiting undesired conduction paths for fault, electromagnetic interference, or common-mode currents. In this report, manufacturing trials for a high-speed carbon fiber reinforced polymer composite motor shaft are presented. Four prototype shafts were produced using a hybrid biaxial/triaxial fabric that was circumferentially wrapped onto an additively manufactured high-temperature washout mandrel. An additional traditional overbraid approach was also evaluated and shows promise for high-rate, high-performance parts using automated manufacturing. This paper discusses the shaft design, manufacturing methods explored, material selection, the manufacturing trials, and the lessons learned. The results of this manufacturing investigation show feasibility for manufacturing composite shafts for electric motors.

Electric moto shaft↗