Search NASA⌕ Search

SEARCH · Search NASA

Results for “Homopolymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Assembling Vertical Block Copolymer Nanopores via Solvent Vapor Annealing on Homopolymer-Functionalized Substrates

Utilizing the self-assembly of block copolymers with large Flory–Huggins interaction parameters (χ) for nanofabrication is a formidable challenge due to the attendant large surface energy differences between the blocks. This work reports a robust protocol for the fabrication of thin films with highly ordered cylindrical nanopore arrays via the self-assembly of an asymmetric poly(styrene-block-4-vinylpyridine) (PS-b-P4VP) diblock copolymer blended with a P4VP homopolymer. The desired vertical domain orientation is achieved at the air–polymer interface by controlled solvent vapor annealing (SVA) using acetone, a solvent with weak selectivity for PS over P4VP, and at the substrate interface by functionalization using a hydroxy-terminated poly(2-vinylpyridine) (P2VP-OH) homopolymer brush. In contrast, the vertical cylinder orientation is unstable during acetone SVA on substrates functionalized using hydroxy-terminated poly(methyl methacrylate) (PMMA-OH). Although PMMA exhibits more balanced interfacial energies between PS and P4VP than P2VP in the dry state, it is also swollen more selectively by acetone. We hypothesize that the nearly balanced solvent swelling of the three polymers (P2VP, P4VP, and PS) stabilizes the vertical cylinder orientation, while unbalanced swelling (PMMA > P4VP and PS) does not. Here we further characterize pore formation by addition of a P4VP homopolymer and its postassembly extraction using ethanol, revealing a narrow window of pore size tunability. Notably, minimal differences in nanopore morphologies are observed for P4VP volume fractions as high as 0.1, regardless of the P4VP molar mass. However, further increasing the P4VP volume fraction results in domain reorientation or macrophase separation when its molar mass is less than or greater than the P4VP block molar mass, respectively. Using a P4VP homopolymer that is nearly equal in length to the P4VP block enables the fabrication of well-ordered arrays of vertical, through-film nanopores with high aspect ratios (>10), small periods (<23 nm), and diameters less than 10 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Depletion Interactions: Effects of Added Homopolymer on Ordered Phases Formed by Spherical Block Copolymer Micelles

Three distinct poly(styrene-b-isoprene) (SI) diblock copolymers with molecular weights of 16-16, 38-14, and 50-13 kDa for styrene and isoprene, respectively, formed spherical micelles when dissolved in diethyl phthalate (DEP). Since DEP is a styrene-selective solvent, micelles with polyisoprene in the core and polystyrene in the corona were formed. At block copolymer concentrations of 20%, 16%, and 14% in DEP, the spherical micelles of SI(16-16), SI(38-14), and SI(50-13) pack onto a face-centered cubic (FCC) lattice, a mixture of FCC and body-centered cubic (BCC) lattices, and a BCC lattice, respectively. Polystyrene homopolymers with molecular weights of 4, 48, and 180 kDa were added to these ordered solutions. The following general trends were observed: the FCC phase tended to disorder, and samples that originally behaved like soft solids exhibited liquidlike flow behavior. The effect increased strongly with both the molecular weight and concentration of homopolymer in the solution. Furthermore, the BCC lattice tended to be displaced by the FCC lattice, or to disorder, when homopolymer was added. These results can be explained by invoking depletion interactions, which have been studied extensively in colloid/polymer mixtures. However, the phenomenon differs in certain details from colloidal systems because the addition of homopolymer can also influence the aggregation number of the micelles, which in turn affects the lattice packing of the micelles.

36 MATERIALS SCIENCE↗

Poly(norbornene) anion conductive membranes: homopolymer, block copolymer and random copolymer properties and performance

It has previously been shown that phase-separated block copolymers with non-ion conducting (hydrophobic) blocks and ion conducting (hydrophilic) blocks can form efficient ion conducting channels with high ionic mobility and conductivity. Block copolymers can provide a means for phase segregation and ion channel formation while homopolymers and random copolymers have been shown to have lower ion mobility. In this study, the properties of poly(norbornene) based anion exchange membranes (AEMs) comprising homopolymers, block copolymers, and random copolymers with high ion-exchange capacity (IEC) (3.48–4.55 meq. g -1 ) have been investigated and compared. The polymers were cross-linked with N,N,N',N'-tetramethyl-1,6-hexanediamine before casting the membranes to avoid excessive water swelling due to high water uptake. It was shown that high ionic conductivity can be achieved in both random copolymers and homopolymers even in the absence of microphase-separated structures. For example, the conductivity of a random copolymer was 194 mS cm -1 at 80 °C, which was comparable to the block copolymer, 201 mS cm -1 at 80 °C. The H 2 /O 2 fuel cell performance of random copolymer composite membranes showed a peak power density of 3.05 W cm -2 and peak current density of 7.85 A cm -2 at 80 °C compared to block copolymer membranes (peak power density of 3.21 W cm -2 and peak current density of 8.27 A cm -2 at 80 °C). It is more critical that high water transport be achieved in AEMs than achieving a phase-segregated morphology. Finally, the homopolymer, block copolymer, and random copolymer membranes showed <1.35% degradation after aging in 1 M NaOH at 80 °C for 1000 h.

08 HYDROGEN↗

Crystalline Structure in Thin Films of DEH-PPV Homopolymer And PPV-B-PI Rod-Coil Block Copolymers

The rod orientation and crystalline packing of a model semiconducting rodlike polymer, poly(2,5-di(2{prime}-ethylhexyloxy)-1,4-phenylenevinylene) (DEH-PPV), is shown to affect the self-assembly of weakly segregated rod-coil block copolymers. The in-plane packing of DEH-PPV rods in lamellar poly(2,5-di(2{prime}-ethylhexyloxy)-1,4-phenylenevinylene-b-isoprene) (DEH-PPV-b-PI) diblock copolymers is nearly identical to that observed in DEH-PPV homopolymers for compositions ranging from 0.42 to 0.82 vol % coil block. The crystal structure of DEH-PPV, characterized by grazing incidence X-ray diffraction and electron diffraction, consists of a tetragonal unit cell having c = 0.665 nm with a = b = 1.348 nm. The polymer chain axis is aligned along the [001] direction, and the nearest neighbor rod-rod spacing along 110 is 1.0 nm. As-cast thin films of DEH-PPV homopolymer demonstrate chain alignment primarily perpendicular to the substrate in 5100 g/mol homopolymer, while for 3500 g/mol homopolymer the chains align both perpendicular and parallel to the substrate. For the DEH-PPV-b-PI block copolymers, a sharper 001 reflection is observed due to the effect of microphase separation, improving alignment and stacking of the rods. The lamellar phases have a smectic A-like packing structure with the rods oriented parallel to the lamellar normal regardless of coil fraction; however, at coil fractions above about 0.8 the crystalline lattice of the rods becomes rapidly disordered as evidenced by loss of all but the two strongest Bragg reflections. This suggests that the constraints of packing into the unit cell outweigh the chain stretching and segment-segment repulsion energies that are predicted to lead to a transition from normal (smectic A) to tilted (smectic C) rod orientation within the lamellae at high coil fraction; increasing coil fraction breaks apart the crystalline lattice rather than distorting it into a tilted polymorph.

36 MATERIALS SCIENCE↗

Addition of Corona Block Homopolymer Retards Chain Exchange in Solutions of Block Copolymer Micelles

The exchange of copolymer chains between 1 vol % PS–PEP (poly(styrene-b-ethylene-alt-propylene)) diblock copolymer micelles in squalane (selective for PEP) is investigated in this work using time-resolved small-angle neutron scattering (TR-SANS) as a function of added PEP homopolymer. The solvent squalane, C 30 H 62 , is substituted in part or completely with PEP homopolymers that are the same molecular weight as the corona blocks. Polymer solutions/mixtures (1 vol % PS–PEP, plus 2, 7, or 15 vol % PEP in squalane, and 1 vol % PS–PEP in PEP) were separately prepared using normal (h-PS) or deuterated equivalent (d-PS) PS–PEP diblock copolymers. The solvent was contrast matched to a 50/50 mixed h-/d-PS micelle core, so that the scattering intensity decays with the mixing of h- and d-PS–PEP chains undergoing exchange between micelles. The chain exchange rate can therefore be assessed quantitatively. As the concentration of added homopolymer in solution increases above the overlap concentration of PEP chains, the chain exchange rate drops significantly. The results are compared to an earlier study of chain exchange between PS–PEP micelles in a 15% solution in squalane, which was also found to be significantly slower than when the solution is dilute. The primary factor in this slowing down of chain exchange is an increased screening of excluded volume interactions among the corona blocks. The role of increasing micelle aggregation number with PEP concentration is found not to be the dominant effect up to 15% added PEP but may play an increasingly important role in the PEP melt matrix, where no chain exchange could be detected in these experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wet Brush Homopolymers as “Smart Solvents” for Rapid, Large Period Block Copolymer Thin Film Self-Assembly

The spontaneous formation of periodic nanopatterns through the self-assembly of block copolymer (BCP) thin films offers an enticing path to engineer functional material properties over large areas, but the prohibitively slow ordering of ultrahigh molecular weight BCPs that generate large pattern periods (>100 nm) severely restricts the design space in which BCPs may be used. Here, we demonstrate that blending lamellae-forming polystyrene-block-poly(methyl methacrylate) diblock copolymers with very low molecular weight polystyrene and poly(methyl methacrylate) homopolymers can reduce by an order-of-magnitude the times required to form ordered large period patterns through solvent vapor annealing. Using in situ grazing-incidence small-angle X-ray scattering and ex situ electron microscopy, we show that the added homopolymer plasticizers act as a “smart solvent”: They increase the mobility of the long BCP chains by amplifying the dilution effect during solvent vapor annealing but segregate to like domains during subsequent thermal annealing to produce high-quality patterns with periods that may exceed 200 nm, which are readily transferred to other materials. The dramatic impact of homopolymer plasticizers may help extend the use of BCPs into new areas, particularly for visible light photonic applications that demand larger period nanopatterns.

36 MATERIALS SCIENCE↗

Homopolymer self-assembly of poly(propylene sulfone) hydrogels via dynamic noncovalent sulfone-sulfone bonding

Natural biomolecules such as peptides and DNA can dynamically self-organize into diverse hierarchical structures. Mimicry of this homopolymer self-assembly using synthetic systems has remained limited but would be advantageous for the design of adaptive bio/nanomaterials. Here, we report both experiments and simulations on the dynamic network self-assembly and subsequent collapse of the synthetic homopolymer poly(propylene sulfone). The assembly is directed by dynamic noncovalent sulfone–sulfone bonds that are susceptible to solvent polarity. The hydration history, specified by the stepwise increase in water ratio within lower polarity water-miscible solvents like dimethylsulfoxide, controls the homopolymer assembly into crystalline frameworks or uniform nanostructured hydrogels of spherical, vesicular, or cylindrical morphologies. These electrostatic hydrogels have a high affinity for a wide range of organic solutes, achieving >95% encapsulation efficiency for hydrophilic small molecules and biologics. This system validates sulfone–sulfone bonding for dynamic self-assembly, presenting a robust platform for controllable gelation, nanofabrication, and molecular encapsulation.

59 BASIC BIOLOGICAL SCIENCES↗

Cyclic olefin homopolymer-based microfluidics for protein crystallization and in situ X-ray diffraction

A cyclic olefin homopolymer-based microfluidics system has been established for protein crystallization and in situ X-ray diffraction. Microfluidics is a promising technology for the rapid identification of protein crystallization conditions. However, most of the existing systems utilize silicone elastomers as the chip material which, despite its many benefits, is highly permeable to water vapour. This limits the time available for protein crystallization to less than a week. Here, the use of a cyclic olefin homopolymer-based microfluidics system for protein crystallization and in situ X-ray diffraction is described. Liquid handling in this system is performed in 2 mm thin transparent cards which contain 500 chambers, each with a volume of 320 nl. Microbatch, vapour-diffusion and free-interface diffusion protocols for protein crystallization were implemented and crystals were obtained of a number of proteins, including chicken lysozyme, bovine trypsin, a human p53 protein containing both the DNA-binding and oligomerization domains bound to DNA and a functionally important domain of Arabidopsis Morpheus’ molecule 1 (MOM1). The latter two polypeptides have not been crystallized previously. For X-ray diffraction analysis, either the cards were opened to allow mounting of the crystals on loops or the crystals were exposed to X-rays in situ. For lysozyme, an entire X-ray diffraction data set at 1.5 Å resolution was collected without removing the crystal from the card. Thus, cyclic olefin homopolymer-based microfluidics systems have the potential to further automate protein crystallization and structural genomics efforts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bubble Relaxation Dynamics in Homopolymer DNA Sequences

Understanding the inherent timescales of large bubbles in DNA is critical to a thorough comprehension of its physicochemical characteristics, as well as their potential role on helix opening and biological function. In this work, we employ the coarse-grained Peyrard–Bishop–Dauxois model of DNA to study relaxation dynamics of large bubbles in homopolymer DNA, using simulations up to the microsecond time scale. By studying energy autocorrelation functions of relatively large bubbles inserted into thermalised DNA molecules, we extract characteristic relaxation times from the equilibration process for both adenine–thymine (AT) and guanine–cytosine (GC) homopolymers. Bubbles of different amplitudes and widths are investigated through extensive statistics and appropriate fittings of their relaxation. Characteristic relaxation times increase with bubble amplitude and width. We show that, within the model, relaxation times are two orders of magnitude longer in GC sequences than in AT sequences. Overall, our results confirm that large bubbles leave a lasting impact on the molecule’s dynamics, for times between 0.5–500 ns depending on the homopolymer type and bubble shape, thus clearly affecting long-time evolutions of the molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compressible Solution Properties of Amorphous Polystyrene-block-Polybutadiene, Crystalline Polystyrene-block-Poly(Hydrogenated Polybutadiene) and Their Corresponding Homopolymers: Fluid-Fluid, Fluid-Solid and Fluid-Micelle Phase Transitions in Propane and Propylene

Abstract Polystyrene, polybutadiene, hydrogenated polybutadiene, and styrene diblock copolymers of these homopolymers can form homogenous solutions in compressible solvents, such as propane and propylene, which separate into two bulk phases upon reducing pressure. The cloud and micellization pressures for homopolymer and diblock copolymers are generally found to be higher in propane than in propylene, except for hydrogenated polybutadiene and polystyrene-block-(hydrogenated polybutadiene). Hydrogenated polybutadiene homopolymers and copolymers exhibit relatively pressure-independent crystallization and melting observed in both propane and propylene solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Level Differences in Ionic Solvation and Transport Behavior in Ethylene Oxide-Based Homopolymer and Block Copolymer Electrolytes

Block copolymer electrolytes (BCE) such as polystyrene-block-poly(ethylene oxide) (SEO) blended with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and composed of mechanically robust insulating and rubbery conducting nanodomains are promising solid-state electrolytes for Li batteries. Here, we compare ionic solvation, association, distribution, and conductivity in SEO-LiTFSI BCEs and their homopolymer PEO-LiTFSI analogs toward a fundamental understanding of the maximum in conductivity and transport mechanisms as a function of salt concentration. Ionic conductivity measurements reveal that SEO-LiTFSI and PEO-LiTFSI exhibit similar behaviors up to a Li/EO ratio of 1/12, where roughly half of the available solvation sites in the system are filled, and conductivity is maximized. As the Li/EO ratios increase to 1/5 the conductivity, of the PEO-LiTFSI drops nearly 3-fold, while the conductivity of SEO-LiTFSI remains constant. FTIR spectroscopy reveals that additional Li cations in the homopolymer electrolyte are complexed by additional EO units when the Li/EO ratio exceeds 1/12, while in the BCE, the proportion of complexed and uncomplexed EO units remains constant; Raman spectroscopy data at the same concentrations show that Li cations in the SEO-LiTFSI samples tend to coordinate more to their counteranions. Atomistic-scale molecular dynamics simulations corroborate these results and further show that associated ions tend to segregate to the SEO-LiTFSI domain interfaces. The opportunity for "excess" salt to be sequestered at BCE interfaces results in the retention of an optimum ratio of uncompleted and complexed PEO solvation sites in the middle of the conductive nanodomains of the BCE and maximized conductivity over a broad range of salt concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of Gas-Phase Ion Structures of Locally Polar Homopolymers Through High-Resolution Ion Mobility Spectrometry–Mass Spectrometry

The strong synergy arising from coupling two orthogonal analytical techniques such as ion mobility and mass spectrometry can be used to separate complex mixtures and determine structural information of analytes in the gas phase. A tandem study is performed using two systems with different gases and pressures to ascertain gas-phase conformations of homopolymer ions. Aside from spherical and stretched configurations, intermediate configurations formed by a multiply charged globule and a “bead-on-a-string” appendix are confirmed for polyethylene-glycol (PEG), polycaprolactone (PCL), and polydimethylsiloxane (PDMS). These intermediate configurations are shown to be ubiquitous for all charge states and masses present. For each charge state, configurations evolve in two distinctive patterns: an inverse evolution which occurs as an elementary charge attached to the polymer leaves the larger globule and incorporates itself into the appendage, and a forward evolution which reduces the globule without relinquishing a charge while leaving the appendix relatively constant. Forward evolutions are confirmed to form self-similar family shapes that transcend charge states for all polymers. Identical structural changes occur at the same mass over charge regardless of the system, gas or pressure strongly suggesting that conformations are only contingent on number of charges and chain length, and start arranging once the ion is at least partially ejected from the droplet, supporting a charge extrusion mechanism. Configurational changes are smoother for PDMS which is attributed to the larger steric hindrance caused by protruding pendant groups. This study has implications in the study of the configurational space of more complex homopolymers and heteropolymers. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Two-dimensional polythiophene homopolymer as promising hole transport material for high-performance perovskite solar cells

A polythiophene homopolymer with conjugated side chains (2D-PT) was applied as a hole transport material (HTM) of perovskite solar cells (PSCs). The all-conjugated two-dimensional structure effectively increases the ionization potential, realizing a high open-circuit voltage near 1 V for the 2D-PT-based PSC. Very interestingly, the two-dimensional wide-angle X-ray scattering measurements show that the 2D-PT molecules are self-assembled into ordered structure with a face-on dominant orientation and exhibit a hole mobility, which is ~1.6 times faster than that of poly(3-hexylthiophene) (P3HT). Consequently, the power conversion efficiency of PSC is noticeably increased by ~30% as 2D-PT replaces P3HT as HTM. Moreover, the densely packed 2D-PT slows down the moisture induced degradation of perovskite crystals, leading to a better environmental stability. As a result, this work demonstrates that two-dimensional non-donor-acceptor structural conjugated polymers can be utilized as promising HTM of PSCs.

36 MATERIALS SCIENCE↗

Water transport and clustering behavior in homopolymer and graft copolymer polylactide

Polylactide is a bio-based and biodegradable polymer well-known for its renewable origins. Water sorption and clustering behavior in both a homopolymer polylactide and a graft copolymer of polylactide was studied using the quartz crystal microbalance/heat conduction calorimetry (QCM/HCC) technique. The graft copolymer, poly(1,5-cyclooctadiene-co-5-norbornene-2-methanol-graft-D,L-lactide), contained polylactide chains (95 wt.%) grafted onto a hydrophobic rubbery backbone (5 wt.%). Clustering is an important phenomenon in the study of water transport properties in polymers since the presence of water clusters can affect the water diffusivity. The HCC method using the thermal power signals and Van't Hoff's law were both employed to estimate the water sorption enthalpy. Sorption enthalpy of water in both polymers was determined to be approximately -40 kJ/mol for all water activity levels. Zimm-Lundberg analysis showed that water clusters start to form at a water activity of 0.4. The engaged species induced clustering (ENSIC) model was used to curve fit sorption isotherms and showed that the affinity among water molecules is higher than that between water molecules and polymer chains. All the methods used indicate that clustering of water molecules exists in both polymers.

36 MATERIALS SCIENCE↗

Direct comparison of gamma, electron beam and X-ray irradiation doses on characteristics of low-density polyethylene, polypropylene homopolymer, polyolefin elastomer and chlorobutyl rubber medical device polymers

There is a growing need for increased efficiency in the sterilization of single use medical devices and other products that contain polymer components. Gamma radiation is widely used for devices suited for radiation sterilization; however, safety, throughput and cobalt-60 source availability are challenging the prospect of relying on gamma radiation to meet the anticipated needs of the industry. Use of electron beam (e-beam) and X-rays as alternatives to gamma for radiation sterilization have been hampered in part by a concern that these modalities may adversely affect polymer integrity and performance relative to the gamma method, for which the industry has had much more experience. To address this concern, the effects of sterilization-relevant doses of ebeam, X-ray and gamma radiation were directly compared using common medical device polymers found in two prototypical commercial devices currently sterilized using cobalt-60 gamma irradiation. The Becton, Dickinson and Company (BD) Vacutainer™ Plus tube contains low-density polyethylene and chlorobutyl rubber components, while the BD Vacutainer™ Push Button Blood Collection Set contains polypropylene homopolymer and polyolefin elastomer components. Injection-molded samples prepared from the polymers used in these products were exposed to target doses of 15, 35, 50 and 80 kGy using gamma, e-beam and X-ray radiation. Changes in coloration, tensile properties and hardness were measured for each condition, and the effects of e-beam and X-ray irradiation compared with the effects of gamma irradiation on these properties. Both e-beam and X-ray appear as viable alternatives to gamma irradiation for sterilization of the polymers tested.

sterilization, gamma, X-ray, electron beam, radiat↗

Engineering Self-Assembled Domain Asymmetry in Solvent Vapor Annealed Block Copolymer–Homopolymer Blend Films

Thin-film block copolymer (BCP) self-assembly is a powerful approach to generate highly uniform nanopatterns across large areas, yet the symmetries of these nanopatterns are constrained by the relative volume occupied by each polymer block. Here, we present a conceptually new approach to circumvent this limitation by combining homopolymer (HP) blending with solvent vapor annealing (SVA), demonstrated here for ternary blends of a near-symmetric BCP with athermal, low molar mass HPs. Screening of BCP–HP interactions by a weakly selective solvent promotes entropically driven delocalization of HP throughout both blocks and enables assembly of metastable lamellae for volume fractions as high as 0.78. Subsequent brief thermal annealing induces HPs to withdraw to their enthalpically favored domains, sharpening domain interfaces on a time scale much shorter than pattern coarsening. This renders lamellar nanopatterns with tunable widths that can be transferred to other materials with high fidelity. Furthermore, the persistence of the metastable asymmetric lamellae upon thermal annealing is sensitive to film confinement, as they are preserved in submonolayer films but transition to horizontal cylinders in films more than one monolayer thick. SVA using a strongly selective solvent results in assembled morphologies aligned closely with expectations based on the total polymer blend composition, underscoring the key role of BCP–HP interactions in dictating domain asymmetry. Overall, this work details important principles for using SVA to mediate BCP–HP interactions in thin films, thereby presenting opportunities to engineer pathways for the assembly of well-ordered nanopatterns with designer feature asymmetry for lithographic or nanotexturing applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Binary mixed homopolymer brushes grafted on nanorod particles: A self-consistent field theory study

We employ the self-consistent field theory to study phase structures of brush-rod systems composed of two chemically distinct linear homopolymers. The polymer chains are uniformly grafted on the surface of a nanorod particle of finite length and comparable radius to the polymer radius of gyration. A “masking” technique treating the cylindrical boundary is introduced to solve the modified diffusion equations with an efficient and high-order accurate pseudospectral method involving fast Fourier transform on an orthorhombic cell. A rich variety of structures for the phase separated brushes is predicted. Phase diagrams involving a series of system parameters, such as the aspect ratio of the nanorod, the grafting density, and the chain length are constructed. The results indicate that the phase structure of the mixed brush-rod system can be tailored by varying the grafted chain length and/or the aspect ratio of the rod to benefit the fabrication of polymeric nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗