Pulsed plasma thruster ignitor plug ignition characteristics
Previously cited in issue 15, p. 2361, Accession no. A82-31913
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Previously cited in issue 15, p. 2361, Accession no. A82-31913
A low power, uncooled plasma torch was tested in combination with a new injector design to study ignition and flameholding in hydrogen-fueled supersonic flows. Both semifree jet and ducted tests were conducted in a Mach 2 flow under simulated scramjet combustor conditions at 1 atmosphere static pressure and total temperatures between 1400 and 2800 R. The injector design incorporates a small upstream pilot fuel flow, a step for recirculation, and primary fuel injectors downstream of the recirculation region. Using a 1:1 volumetric mixture of hydrogen and argon, good performance at a simulated flight Mach number of 3.7 is found for a 1-kW torch which is located in the recirculation zone and fueled by the upstream pilot fuel injectors. Spectroscopic measurements verified the presence of hydrogen atoms in the torch exhaust, and it is suggested that hydrogen atoms are responsible for the ignition.
The hydrogen-oxygen torch igniter described herein has been successfully used for many years at various NASA Lewis Research Center rocket test facilities to provide ignition for rocket engine research hardware. This igniter is inexpensive, simple to operate, and has demonstrated very good reliability. It has been used as an ignition source for rocket engines that utilized a variety of propellant combinations; some of these engines developed up to 40,000 lb of thrust.
Sol-gel chemistry is used to prepare igniters comprising energetic multilayer structures coated with energetic booster materials. These igniters can be tailored to be stable to environmental aging, i.e., where the igniters are exposed to extremes of both hot and cold temperatures (-30 C to 150 C) and both low (0%) and high relative humidity (100%).
Abstract Not Provided
Sol-gel chemistry is used to prepare igniters comprising energetic multilayer structures coated with energetic materials. These igniters can be tailored to be stable to environmental aging, i.e., where the igniters are exposed to extremes of both hot and cold temperatures (-30 C to 150 C) and both low (0%) and high relative humidity (100%).
Abstract not provided.
Abstract not provided.
Abstract not provided.
Nuclear fusion studies are currently devoted to the Deuterium-Tritium (DT) fuel cycle, the easiest way to reach ignition. The recent stress on safety by the world community has stimulated the research on other fuel cycles, based on advanced reactions, such as Deuterium-Helium-3 (DHe). With DHe, it is not necessary to breed and fuel tritium. The DHe cycle has a very low presence of energetic fusion neutrons, due to DD and DT side reactions, and it has the possibility to obtain electrical power by direct energy conversion of the protons produced by the fusion reactions. DHe fusion has its own set of problems, such as the availability of {sup 3}He and the attainment of the higher plasma parameters. To explore the possibilities of DHe plasmas, a burning plasma experiment at high magnetic field and high plasma densities is particularly attractive. Ignitor is a proposed compact high-magnetic field tokamak, aimed at studying plasma-burning conditions in Deuterium-Tritium plasmas. The Ignitor experiment is designed to reach ignition under controlled DT burning conditions. The machine parameters have been established, on the basis of existing knowledge of the confinement properties of high density plasmas. The scientific goal of the Ignitor experiment is to approach, for the first time, the ignition conditions of a magnetically confined D-T plasma. However, the plasma density limit in Ignitor being well above the optimal density for DT ignition, is potentially suitable to the higher densities required for DHe burning. In fact, Ignitor has been designed also to explore conditions where 14.7-MeV protons and 3.6-MeV alpha particles produced by the DHe reactions can supply a significant amount of thermal energy to a well-confined plasma. In particular, Ignitor can sustain plasma currents exceeding those required to confine proton orbits at birth, and has more than sufficiently high densities so that the slowing-down time of both the protons and the DT alpha particles is shorter than the electron energy replacement time of the thermal plasma in which they are produced. Preliminary analyses show that a fusion power PF around 2 MW, may be reached. As a start, Ignitor can perform initial studies at the level of approximately 1 MW of power in charged particles from the DHe reaction in a mostly DT plasma. CANDOR, a design evolution of Ignitor in the direction of a reactor using a DHe fuel cycle, has been proposed; it is a feasibility study of a high-field DHe experiment of larger dimensions and higher fusion power than Ignitor, however still based on the core Ignitor technologies. The main characteristics of the CANDOR machine are the following: the major radius Ro is about double than Ignitor, plasma currents up to 25 MA with toroidal magnetic fields B{sub T} = 13 T can be produced. Unlike Ignitor, CANDOR would operate with higher values of poloidal beta around unity and the central part of the plasma column in the Second Stability region. The characteristic times over which the plasma discharge can be sustained are longer by more than a factor of 4 than those of Ignitor. To produce such a strong magnetic field in a larger machine, the toroidal field coils have been divided into two sets of coils and the central solenoid (air core transformer) is placed between them in the inboard part. In CANDOR, the DHe burning regime can be reached, by a combination of ICRF heating and alpha particle heating due to DT fusion reactions, which take the role of a sort of trigger. Thanks to this fact, and unlike other proposed DHe fusion experiments, CANDOR is capable of reaching DHe ignition using the existing technologies, and present knowledge of plasma confinement phenomena. With the initial use of DT, where tritium comprises some 50% of an initial lower density DT plasma, but is not added thereafter, the need for an intense auxiliary heating, which is one of the main technological drawbacks of DHe ignition, would be considerably alleviated, becoming feasible with the present technology. However, this method has the disadvantage of using tritium and of presenting a higher neutron flux (due to DT reactions) than 'pure' DHe plasmas, generating a neutron flux transient when passing from the initial DT trigger reaction to the final DHe burning plasma. However, for an experimental machine one-of-a-kind of relatively small dimensions, this is not an issue. (authors)
GE Steam Power, Inc. (GE) proposed to improve reliability, flexibility, and economics of an existing coal-fired power plant by applying a new advanced technology developed by GE, a plasma-assisted pulverized fuel firing system. The objective of this program is to demonstrate the achievement of lower load by improved flame stabilization and therefore lower operating costs in a full-scale field installation at coal-fired electric utility. GE’s Plasma Ignition and Combustion Stabilization System is designed to operate continuously to support low load operation. With the plasma on, the flame will be attached and stable, removing the firing system as a limitation to low load operation. In addition, GE’s exclusively from ABENZ company licensed AC based technology has a 90+% system efficiency compared to all other systems at which are DC and operate with ~75% efficiency. Plant operating costs are lowered by eliminating use of expensive support fuel as well as the ability to operate at lower loads. The utilities’ ability to better match the demand curve will result in significant savings. Maintenance is lower for an AC system than a DC system as it operates at lower current. This eliminates the need for a demineralized cooling water system and provides longer electrode life which translates into both material and labor savings. It is the objective of GE to not only demonstrate the additional low load achievable with a plasma system after best achievable tuning, sensor and software approach has been exhausted, but also the increased stability of the flame at all loads with plasma assistance as well as cost savings at all low loads using plasma instead of oil. Upon successful completion of this project, GE will have sufficient field experience to rapidly deploy the Plasma Technology. The project objectives were achieved through the implementation of plasma ignitor technology at PacifiCorp Hunter Station Unit 3. A plasma ignitor system was retrofitted on ten wall-fired burners, Mill 3-4 combustion system. The Plasma Ignitors installed at Hunter proved that this GE technology is a direct and complete replacement for the original oil ignitors. The Hunter Unit 3 burner management system allows the plasma system to be used in all applications that originally required oil to be burned. This includes any time the Mill 3-4 is started or stopped for any reason including boiler starts, load changes, and low load support.
A model and its improvements are introduced for a recently proposed approach to inertial confinement fusion, called fast-shock ignition (FSI). The analysis is based upon the gain models of fast ignition, shock ignition and considerations for the fast electrons penetration into the pre-compressed fuel to examine the formation of an effective central hot spot. Calculations of fast electrons penetration into the dense fuel show that if the initial electron kinetic energy is of the order ∼4.5 MeV, the electrons effectively reach the central part of the fuel. To evaluate more realistically the performance of FSI approach, we have used a quasi-two temperature electron energy distribution function of Strozzi (2012) and fast ignitor energy formula of Bellei (2013) that are consistent with 3D PIC simulations for different values of fast ignitor laser wavelength and coupling efficiency. The general advantages of fast-shock ignition in comparison with the shock ignition can be estimated to be better than 1.3 and it is seen that the best results can be obtained for the fuel mass around 1.5 mg, fast ignitor laser wavelength ∼0.3 micron and the shock ignitor energy weight factor about 0.25.
Time-resolved temperature and density conditions in the core of shock-ignition implosions have been determined for the first time. The diagnostic method relies on the observation, with a streaked crystal spectrometer, of the signature of an Ar tracer added to the deuterium gas fill. The data analysis confirms the importance of the shell attenuation effect previously noted on time-integrated spectroscopic measurements of thick-wall targets [R. Florido et al., Phys. Rev. E 83, 066408 (2011)]. This effect must be taken into account in order to obtain reliable results. The extracted temperature and density time-histories are representative of the state of the core during the implosion deceleration and burning phases. As a consequence of the ignitor shock launched by the sharp intensity spike at the end of the laser pulse, observed average core electron temperature and mass density reach T ~ 1100 eV and ρ ~ 2 g/cm 3 ; then temperature drops to T ~ 920 eV while density rises to ρ ~ 3.4 g/cm 3 about the time of peak compression. Compared to 1D hydrodynamic simulations, the experiment shows similar maximum temperatures and smaller densities. Simulations do not reproduce all observations. Differences are noted in the heating dynamics driven by the ignitor shock and the optical depth time-history of the compressed shell. Time-histories of core conditions extracted from spectroscopy show that the implosion can be interpreted as a two-stage polytropic process. Furthermore, an energy balance analysis of implosion core suggests an increase in total energy greater than what 1D hydrodynamic simulations predict. This new methodology can be implemented in other ICF experiments to look into implosion dynamics and help to understand the underlying physics.
A one-dimensional planar compressible-piston-like model is used to investigate the basic physics behind shock-ignition inertial confinement fusion implosions. We discuss the theoretical limit set by rarefaction waves on the maximum hot-spot pressure achievable through conventional compression. Three ignitor shock techniques are presented to mitigate the effects of rarefaction waves, enhance the stagnation hot-spot pressure, and improve the ignition conditions. Elimination of rarefaction waves can lead to an {approx}80% increase in peak implosion pressures, while implosions augmented with ignitor shocks are shown to increase the peak pressures by a factor of {approx}4. These techniques are then discussed and the optimal energy ratio between the initial shell kinetic energy and the ignitor pulse energy is given.
The objective of the work reported herein was to explore the use of a continuous operation plasma torch as an ignitor and flameholder for scramjet combustion. This research was motivated by the desire to eliminate the use of pyrophoric or toxic ignition and/or combustion enhancement materials in operational aircraft or shipboard systems. The total temperatures and torch powers used to ignite/flamehold Mach 2 combustion with hydrogen, ethylene, ethane, and methane were determined. The minimum ignition total temperatures for the fuels tested were hydrogen - 1065 R (lowest test temperature); ethylene - 1500 R; ethane - 2000 R; methane - 2700 R. These temperatures were obtained while operating the torch at a nominal 2 kw net power. The torch was shown to be a good ignitor and flameholder in that both hydrogen and hydrocarbon fuels could be stabilized by the torch and would 'blow off' when the torch was extinguished. The effectiveness of the torch was very sensitive to relative fuel injection location. Best combustion resulted when fuel was injected both upstream and downstream of the torch. These results indicated that an adiabatic plasma torch operating at about 2 kw could be an effective ignitor and flameholder for high-speed combustion.
A plasma assisted spark ignition system includes an ignitor and a power supply. The first ignitor includes: a casing having a first end, a second end that forms a first electrode, and a longitudinally extending passage, a second electrode which protrudes longitudinally outward from an opening at the second end of the casing and laterally spaced inwardly to form a spark gap, and an electrical insulator (dielectric) surrounding a portion of the second electrode, and which has a terminus that is at least closely spaced to an interior surface of the end of the casing. The power supply supplies a plurality of voltage pulses to the ignitor per ignition event to generate a flash over on the dielectric. Subsequent pulses in an ignition event may be at lower amplitude than an initial pulse in the ignition event. Pulses may, for example, have a duration on the order of a nanosecond.
Efforts to enhance power generation efficiency and reduce emissions have driven interest in novel combustion techniques, including non-equilibrium plasma (NEP) ignitors. NEP ignitors show promise in improving energy conversion efficiency, fuel reforming, emission control, and lean-flammability limits. However, their adoption is hindered by a limited understanding of the interplay between plasma-enhanced combustion and thermal chemistry, particularly for complex fuels under engine-relevant conditions. Developing experimentally validated kinetic mechanisms is therefore critical. Additionally, the increasing interest in renewable biofuels like ethanol and methanol, coupled with the desirable qualities of NEP ignitors, presents a compelling opportunity for study. Therefore, this work acts as an extension of a previous work (Bopaiah et al., 2023) pertaining to the experimental results of NEP-assisted methanol pyrolysis and oxidation. Experiments were performed with a custom-built plasma flow reactor at 0.5 atm and temperatures from 523-1203 K. All reactive mixtures are extremely diluted to minimize exothermicity due to reactivity, allowing isothermal assumptions and the isolation of plasma chemistry from thermal chemistry. A dielectric barrier discharge plasma, at 14 kV and 15 ns full-width half maximum, was applied to the reactive mixture at varying frequencies to maintain the number of pulses with increasing temperature. Steady-state product speciation was performed downstream of the reactor with ex-situ GC/MS diagnostics. The attained experimental results were examined through in-depth analysis performed by means of an in-development plasma-coupled kinetic mechanism. As discussed in the previous work, the plasma significantly accelerates methanol pyrolysis, increasing stable intermediate production, including oxygenated and nitrile species. Plasma-assisted oxidation shows even faster fuel consumption compared to pyrolysis and a 200 K ignition shift compared to thermal oxidation. For plasma-assisted pyrolysis, the model demonstrates that accelerated fuel consumption stems from dissociative quenching of excited N2 states with fuel and H2, generating H radicals that react to rapidly form CH3 and CH2OH radicals. At low temperatures, these radicals recombine to produce oxygenates, while CH3 drives nitrile and hydrocarbon formation at higher temperatures. While the model captures pyrolysis trends well, discrepancies in methane, ethylene, and ethanol predictions are present. Similarly, the model faces challenges in accurately representing plasma-assisted oxidation, predicting a much steeper fuel gradient and ignition 100 K earlier than the experiment. While a similar scheme to pyrolysis is nested in the reaction pathway, the enhancement of the O and H radical fluxes and their initiation of the OH and HO2 radical pools dominate fuel and intermediate oxidation. The overestimation of these processes is shown to be responsible for the divergence of model from experiment. While the modelling predictions of this preliminary mechanism are not perfect, they serve as a valuable starting point. Primarily, they elicited new reaction pathways that are not otherwise possible in thermal chemistry induced reaction kinetics. The results also provide a basis for the future work that should be performed. For example, theoretical and experimental studies on excited nitrogen species and fuel/fuel radical interactions, quantification of the NOx production, and the kinetics behind the slow ignition observed in oxidation should be emphasized.
It has been suggested that fast electrons may play a beneficial role in the formation of the ignitor shock in shock ignition owing to the high areal density of the fuel at the time of the ignitor pulse. In this paper, we extend previous studies which have focused on monoenergetic electron sources to populations with extended energy distributions. In good agreement with analytic scalings, we show that strong shocks can be produced with peak pressures of a few hundred Mbar to over 1 Gbar using fast electron intensities of 1–10 PW/cm{sup 2} in a uniform deuterium-tritium plasma at 10 g/cm{sup 3}. However, the length required for shock formation increases with fast electron temperature. As this shock formation distance becomes comparable to the target size, the shock is not able to fully develop, and this implies a limit on the ability of fast electrons to aid shock formation.