SEARCH · Search NASA

Results for “Interface & surface thermodynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Methanol at Water–TiO 2 Interfaces: Free Energies of Water and Methanol Dissociation

Methanol adsorption on TiO 2 surfaces has long been studied due to its role in enhancing photocatalytic hydrogen evolution, yet how it modulates surface chemistry under aqueous conditions remains little understood. Using molecular dynamics with an ab initio-based deep neural network potential, we find that methanol adsorption induces markedly different effects on the aqueous surfaces of anatase and rutile, the two common phases of TiO 2 . In anatase, methanol adsorption significantly enhances water dissociation, which is otherwise rare at the neat water interface. This enhancement arises from an alternative dissociation pathway mediated by surface-bound methoxyl groups. In contrast, methanol adsorption tends to suppress water dissociation on rutile, replacing it with thermodynamically favored methanol dissociation. Overall, methanol adsorption in an aqueous environment alters not only the availability of key reactive intermediates involved in hydrogen evolution but also the hydrogen source, which turns out to be primarily methanol on rutile, whereas both water and methanol are consumed on anatase. These results provide mechanistic insights into the coupled roles of organic adsorbates and water at photocatalytic interfaces, with implications on how methanol enhances the activity of H 2 evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Nanoionics Drastically Accelerating Mass Transfer at Elevated Temperatures over 750 °C

Nanoionics were previously considered thermally unstable and infeasible for devices operating above 500 °C. Here, we elucidate the design principle for establishing stable nanoionics from various oxides. We utilized reversible solid oxide cells (SOCs) as the test bed and implemented nanoionics using atomic layer deposition (ALD). We demonstrate a straightforward, interface-controlled, practical approach to render a conformal, ∼15 nm thick ALD film, which initially thermodynamically favors the formation of a solid solution with the substrate into surface nanoionics with single or double layers of nanograins with random crystal orientations. The nanoionics exhibited conductivity estimated to be 7 orders of magnitude higher than that of their bulk-scale counterpart. They demonstrated conformability with uniform grain sizes of ∼15 nm, even after electrochemical operation for ∼500 h at 750 °C and 1000 h at 850 °C. The thermal stability and conductivity of such nanoionics represent a conceptual and technological framework in nanoionics.

atomic layer deposition↗

DOE OSTI2025

Mesoporous Thin Film Architectures: Addressing Material Demands through Molecular Self-Assembly

Mesoporous thin films spark interest across a wide range of disciplines due to their tunable nanostructures, large internal surface areas, and strong compatibility with planar optical, electronic, and microfluidic devices. While attention in the porous materials community has shifted toward macroporous or disordered nanoporous systems, a resurgence in mesoporous thin film research is underway, driven by new molecular self-assembly methods, advanced materials chemistry, and improved characterization techniques. The integration of high-χN block copolymer design, kinetically persistent micelle templating, and postdeposition processing protocols now allows control over structural parameters such as pore size, wall thickness, porosity, and connectivity. These advances have overcome many of the thermodynamic and processing constraints that previously limited widespread adoption. Rather than serving only as high-surface-area supports, mesoporous thin films are engineered as active interfaces where responsive chemistries and nanoscale confinement act in tandem. Embedding switchable ligands, thermoresponsive polymers, redox mediators, or ion-selective groups directly within the pore walls enables real-time control over transport, optical, and electrochemical properties. These capabilities open up new directions in adaptive coatings, gated membranes, and fast-response biosensors. To further expand their functional scope, mesoporous films are integrated into hierarchical and multicomponent architectures. Techniques such as triblock terpolymer templating, crack-directed assembly, and nanoimprint lithography allow for control over spatial organization on the micron and submicron scale and pore system orientation. This enables programmable anisotropy, enhanced molecular diffusion, and wavelength-selective photonic behavior, essential for next-generation sensing, catalysis, and energy applications. Such structural and functional complexity requires equally sophisticated characterization. Multimodal and in situ techniques can track material dynamics under operational conditions. Recent progress includes extended-range ellipsometric porosimetry (EP) for hierarchical architectures, vacuum EP for interface energetics, time-resolved EP for diffusion kinetics, and correlative AFM-SAXS mapping. The introduction of advanced neutron-based spectroscopies, particularly quasielastic neutron scattering (QENS), promises to provide real-time access to ion transport dynamics and segmental motion under nanoscale confinement, offering a path toward deeper mechanistic understanding of structure-performance correlations in mesoporous systems. This Account reflects the technical advances made and the interdisciplinary collaborations that have shaped our collective vision. The particular dimensions of mesopores enable us to subtly tune interactions at the molecular, interfacial, and mesoscopic levels that permit us to harness nanoconfinement. What emerges is a versatile, modular platform capable of chemical gating, energy transduction, and sensing with a level of tunability unmatched by other porous materials. We highlight critical challenges including the need for more robust large-area processing, a deeper understanding of dynamic behavior under cycling, and better integration with device-level architectures. Our strategies support the transition of mesoporous thin films into active high-performance components in next-generation energy, environmental, and biomedical systems.

oxides↗

NASA NTRSDate not supplied

Improving Boundary Layer Data Assimilation Using Observation Data from Multiple Observing Systems in the NASA GEOS System

The Planetary Boundary Layer (PBL) is a complex interface that mediates energy and moisture exchanges between the Earth’s surface and atmosphere. Accurate simulation and observation of PBL characteristics, such as PBL height and thermodynamic structure, have proven to be a challenge. In our latest efforts, we have focused on improving PBL thermodynamic structure using data from multiple observing systems in the Goddard Earth Observing System (GEOS), developed by the NASA Global Modeling and Assimilation Office (GMAO). We present strategies and results from assimilating PBL height data derived from radiosondes, GNSS radio occultation, space-based lidar (CALIPSO, CATS, IceSat-2), ground-based lidar (MPLNET), and radar wind profilers, including a novel global PBL height analysis dataset. We also discuss the impacts of better representing capping inversions by using PBL height data together with other observations in GEOS through adjustments to the background error covariance. Long-term statistics of the impact of assimilating and utilizing PBL height data in GEOS are presented. In addition, we explore an innovative approach to assimilate GNSS-RO refractivity data in the lower troposphere.

Eun-Gyeong Yang↗

DOE OSTI2025

Investigation of Corrosion Behavior of Carbide Phase Strengthened Nickel‐Based Alloy in Molten Fluoride Salt

The corrosion behavior of a high creep strength carbide-phase strengthened Ni-based alloy in molten FLiNaK (LiF-NaF-KF: 46.5-11.5-42 mol%) salt in the temperature range of 700°C–750°C has been investigated as a part of the development of structural alloys for fluoride salt-based molten salt reactors (MSRs). The alloy composition was designed based on Hastelloy-N, but with the goal of improving creep strength. Cr depletion depth, a measure of corrosion, was observed to be single micrometers after several hundred hours of corrosion testing. Sequential corrosion testing involving testing of pre-tested samples in fresh salt coupled with SEM-EDS, scanning transmission electron microscopy (STEM) examinations and thermodynamic and kinetic modeling, suggest that the corrosion rate at the alloy-salt interface is governed by diffusion of elements from the alloy bulk to the surface. The carbide phases in the corrosion-tested sample microstructure were identified to be largely M 6 C-type Mo-rich carbides and MC-type mixed carbides. Atom probe tomography (APT) showed some partitioning of Cr and Ti to the carbide phase and showed the carbide phases to be stable at the salt-facing surface.

Gordon, Ryan [Univ. of Wisconsin, Madison, WI (Uni↗

DOE OSTI2025

Phase-field modeling of diffusion bonding in 316H stainless steel: Impact of processing conditions on grain morphology and bonding quality

A novel multi-phase, multi-component phase‐field model is presented to study the diffusion bonding of 316H stainless steel. Combined with targeted experimental investigations, this model simulates the bond-growth process and predicts the bonding quality. Unlike previous models, our approach captures the simultaneous evolution of voids and grain structures, while quantifying bonding quality using defined bonding ratio. A comprehensive analysis of bond process control is performed by changing temperature, pressure and surface roughness observing the resulting bond structure, which is consistent with experimental observations and analytical predictions. Temperature is determined to be the dominant factor, with the transition from a flat to a robust bond occurring between 1000 °C and 1050 °C. At the ideal bonding temperature of 1050 °C, a surface roughness exceeding 0.6 μm or an applied stress below 4 MPa results in poor bonding quality. Beyond this, higher pressures and smoother surfaces reduce void size, accelerate void shrinkage, and lead to improved bond integrity. This diffuse-interface model can be extended to other material systems if supplied with appropriate thermodynamic and kinetic data. In conclusion, this makes it an effective modeling platform for optimizing high-temperature diffusion bonding and developing reliable bonded components such as compact heat exchangers.

Diffusion bonding↗

NASA NTRS1988

Electrohydrodynamic migration of charged droplets in an insulating fluid

The motion of charged, conducting droplets present in an insulating fluid medium is analyzed under the action of an electric field, in microgravity. Previous analyses of this problem have considered the Maxwell stresses as the only driving force. In the present study, arguments from macroscopic thermodynamics and the molecular theory of surface tension are used to show that the surface tension gradients can be induced due to the variation of the electric potential on the interface. In the limit of Reynolds numbers small compared to unity, the terminal velocity of migration of the droplet is calculated under the combined action of the Maxwell stresses and the surface tension gradients. The results show that there are no surface tension gradients (i.e., no electric potential variation at the interface) in a case that is due to the convection of the surface charges, surface tension gradients do exist and tend to reduce the terminal velocity of the droplet. The shape of the droplet altered by the motion was also calculated, when the deformations from the spherical shape are small.

Balasubramaniam, R.↗

NASA NTRS1988

Electrohydrodynamic migration of charged droplets in an insulating fluid

Balasubramaniam, R.↗

NASA NTRS2023

Assessment of the Fluid Dynamics Boundary Condition in Ablating or Blowing Flows

Improved models of ablative thermal protection systems have enabled the treatment of materials and fluid behavior in a coupled manner. This paper reports a new approach to modeling the interface between fluid and material, with attention to the conservation of species mass flux and energy on the fluid side of the interface. The general equation is presented and is shown to recover the traditional uncoupled fluid/materials response interface. Including the chemical reaction terms on the CFD side of the interface makes the heat flux exchange independent of the thermodynamic reference state and, therefore, a measurable quantity. Doing so allows the material response solver to take as input the surface heat flux rather than a film coefficient. Removing the film coefficient approximation enables more direct solution of vehicle thermal response but requires consistency in the wall state. The mixing of the shock layer and pyrolysis gas is then computed with finite rate chemistry within the fluid solver. The boundary conditions described have been implemented in the DPLR v4.05.1 code. Char removal is captured using finite rate chemistry in DPLR’s gas surface interaction module. Aspects of coupling these solutions to material response are discussed.

Ablation↗

NASA NTRS2023

Assessment of the Fluid Dynamics Boundary Condition in Ablating or Blowing Flows

Ablation↗

NASA NTRS2011

Cryogenic Propellant Feed System Analytical Tool Development

The Propulsion Systems Branch at NASA s Lyndon B. Johnson Space Center (JSC) has developed a parametric analytical tool to address the need to rapidly predict heat leak into propellant distribution lines based on insulation type, installation technique, line supports, penetrations, and instrumentation. The Propellant Feed System Analytical Tool (PFSAT) will also determine the optimum orifice diameter for an optional thermodynamic vent system (TVS) to counteract heat leak into the feed line and ensure temperature constraints at the end of the feed line are met. PFSAT was developed primarily using Fortran 90 code because of its number crunching power and the capability to directly access real fluid property subroutines in the Reference Fluid Thermodynamic and Transport Properties (REFPROP) Database developed by NIST. A Microsoft Excel front end user interface was implemented to provide convenient portability of PFSAT among a wide variety of potential users and its ability to utilize a user-friendly graphical user interface (GUI) developed in Visual Basic for Applications (VBA). The focus of PFSAT is on-orbit reaction control systems and orbital maneuvering systems, but it may be used to predict heat leak into ground-based transfer lines as well. PFSAT is expected to be used for rapid initial design of cryogenic propellant distribution lines and thermodynamic vent systems. Once validated, PFSAT will support concept trades for a variety of cryogenic fluid transfer systems on spacecraft, including planetary landers, transfer vehicles, and propellant depots, as well as surface-based transfer systems. The details of the development of PFSAT, its user interface, and the program structure will be presented.

Lusby, Brian S.↗

DOE OSTI2025

Facet-Dependent Cold Welding of Au Nanorods Revealed by Liquid Cell Transmission Electron Microscopy

Cold welding of metals at the nanoscale has been demonstrated to play a significant role in bottom-up manufacturing and self-healing processes of nanostructures and nanodevices. However, the welding mechanism at the nanoscale is not well understood. In this study, a comprehensive demonstration of the cold welding process of gold nanorods with different modes is presented through in situ liquid cell transmission electron microscopy. The experimental results and molecular dynamics simulations reveal that the nanorods are welded through the facet-dependent atomic surface diffusion and rearrangement along {100} facets. The density functional theory calculations indicate that the preferred coalescence of two {100} surfaces is thermodynamically favorable. Unlike the prevalent “oriented attachment” in the nanoparticle coalescence, the misalignment of nanorod orientations and local stresses can induce grain boundaries and stacking faults in the welded interface.

42 ENGINEERING↗

NASA NTRS1974

Mariner-9 based simulation of radiative convective temperature changes in the Martian dust-laden atmosphere-soil system

A numerical simulation of radiative, conductive, and convective heat transfer of the Martian dust-laden atmosphere-soil system is presented with particular emphasis given to heating/cooling in regions of sharp variation in temperature or absorption and its resultant impact on outgoing planetary spectral radiance, as measured by the Mariner 9 IRIS. Thermal coupling between the ground and atmospheric subsystems is modeled by the total heat flux balance at the interface. In the simulation procedure, local thermodynamic equilibrium (LTE) is assumed, and a combined strong-weak line transmission function permits short- and long-range exchanges of energy from the surface toward space. Direct absorption of insolation in the near-IR bands by both silicate dust and CO2 is incorporated.

Dannevik, W. P.↗

NASA NTRS1979

A large-scale numerical model of sea ice

The described large-scale sea ice model, which is capable of coupling with atmospheric and oceanic models of comparable resolution, simulates the yearly cycle of ice in both the Northern and Southern Hemispheres. Model results for the yearly cycle of sea ice thickness and extent in both the Arctic and the Antarctic are presented. Horizontally the model resolution is approximately 200 km, while vertically four layers - ice, snow, ocean, and atmosphere - are considered. Thermodynamic processes based on energy balances at the various interfaces and dynamic processes based on wind stress, water stress, Coriolis force, internal ice resistance, and the stress from the tilt of the sea surface are incorporated. It is assumed that the ice within a given grid square is of uniform thickness, although each square has a variable percentage of its area ice free.

Parkinson, C. L.↗

NASA NTRS1991

Enhancement of the no-vent fill process

This paper presents an analytical and experimental evaluation of an enhanced techniques for no-vent fill. The method entails injecting liquid through the top of the receiver vessel, thereby increasing surface area and agitation of the ullage/liquid interface. Both of these factors promote condensation induced ullage collapse, and reduce compressive impedance to the incoming liquid. The enhanced process was analyzed by modifying the surface area algorithm of an existing tank thermodynamic code to model a downward-pointing, conical jet impringing on a steadily rising liquid surface. Transient pressure and temperature measurements from several tests with Freon-114 were input into the revised model to calculate condensation rate as a function of fill level. By expressing these rates in dimensionless form (i.e., in terms of Stanton number and Prandtl number), an empirical correlation similar to the submerged jet model of Brown and Sonin (1989) was derived. This provided a basis for developing an expression which relates top fill to bottom fill performance.

Vaughan, David A.↗

DOE OSTI2025

Effects of high-pressure hydrogen exposure on filler-elastomer adhesion

Elastomers are known to gain enhanced mechanical properties through compounding with nanosized filler particles such as silica or carbon black. Filler dispersion and filler-polymer interfacial strength are key contributing factors to this improvement. The interfacial strength is critical to part lifetime in pressurized gas sealing applications such as O-rings, where weak binding between the filler particle and polymer matrix can lead to internal void structures. With the aim to build a fundamental understanding of precursors to pressurized hydrogen-induced failure in elastomers, we use all-atom molecular dynamics simulations to study the impact of hydrogen oversaturation on filler-polymer interaction strength. We systematically study the interface between a commonly used elastomer, ethylene-propylene-diene monomer (EPDM) and silica by varying gas concentration, crosslink density, and surface chemistry. Our simulations predict that decompression leads to a localization of excess gas near the interface. In conclusion, we demonstrate that this localized gas can weaken interfacial adhesion and quantify the interaction using thermodynamic approaches.

EPDM↗

NASA NTRS1981

XPS study of interface formation of CVD SiO2 on InSb

The interfacial chemistry of CVD SiO2 films deposited on thin native oxides grown on InSb substrates is examined using X-ray photoemission spectroscopy (XPS) and a relatively benign chemical etching technique for depth profiling. An intensity analysis of XPS spectra is used to derive the compositional structure of the interfaces obtained in the SiO2/native oxide/InSb system. Peak positions in these spectra are used to follow the change in substrate surface potential during the etch sequence, and to establish the chemical nature of the species formed during deposition and subsequent processing. Reaction of the substrate with oxygen resulted in an In-rich native oxide and 1-2 monolayers of excess elemental Sb at the native-oxide/substrate interface, incompletely oxidized silane reduced the native oxide, leaving less than 1 monolayer of elemental In at the SiO2/native oxide interface. Etch removal of this thin In-rich layer leads to a change in the substrate surface potential of 0.06 eV, corresponding to a net increase in positive charge. The results are consistent with simple thermodynamic considerations; they are also compared to previously reported studies of deposited dielectrics on III-V compound semiconductors.

Vasquez, R. P.↗

NASA NTRS1998

Dynamics of Liquids in Edges and Corners (DYLCO): IML-2 Experiment for the BDPU

Knowledge of the behavior of fluids possessing free surfaces is important to many fluid systems, particularly in space, where the normally subtle effects of surface wettability play a more dramatic and often surprising role. DYLCO for the IML-2 mission was proposed as a simple experiment to probe the particular behavior of capillary surfaces in containers of irregular cross section. Temperature control was utilized to vary the fluid-solid contact angle, a questionable thermodynamic parameter of the system, small changes in which can dramatically influence the configuration, stability, and flow of a capillary surface. Container shapes, test fluid, and temperature ranges were selected for observing both local changes in interface curvature as well as a global change in fluid orientation due to a critical wetting phenomenon. The experiment hardware performed beyond what was expected and fluid interfaces could be readily digitized post flight to show the dependence of the interface curvature on temperature. For each of the containers tested surfaces were observed which did not satisfy the classic equations for the prediction of interface shape with constant contact angle boundary condition. This is explained by the presence of contact angle hysteresis arising from expansion and contraction of the liquid during the heating and cooling steps of the test procedure. More importantly, surfaces exceeding the critical surface curvature required for critical wetting were measured, yet no wetting was observed. These findings are indeed curious and pose key questions concerning the role of hysteresis for this critical wetting phenomena. The stability of such surfaces was determined numerically and it is shown that stability is enhance (reduced) when a surface is in its 'advancing' ('receding') state, The analysis shows complete instability as the critical wetting condition is reached. The case of ideal dynamic wetting is addressed analytically in detail with results of significant flow characteristics presented in closed form. The solutions indicate a square root of T dependence of the capillary 'rise' rate which is corroborated by drop tower tests. The analysis clearly shows that infinite time is necessary for surfaces to reorient at the critical wetting transition.

Langbein, D.↗