Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Dynamic flux surrogate-based partitioned methods for interface problems

Loosely coupled partitioned methods for multiphysics problems treat each subproblem as a separate entity and advance them independently in time. In so doing these methods enable code reuse, increase concurrency and provide a convenient framework for plug-and-play multiphysics simulations. However, mathematically loosely coupled schemes are equivalent to a single step of an iterative solution method, which can compromise their accuracy and stability. We present a new data-driven partitioned method for coupled parametric PDEs that can improve upon the accuracy of traditional loosely coupled methods without incurring a performance penalty. To that end, we replace conventional field transfers across the interface by a surrogate for the dynamics of the interface flux exchanged between the subdomains. To develop this surrogate we apply dynamic mode decomposition to a non-standard staggered-in-time state, comprising the interface flux and small solution patches near the interface. The new approach shifts the main computational burden to an offline training phase, whereas application of the surrogate in the online phase amounts to a single matrix–vector multiplication. In conclusion, we provide stability analysis of the surrogate-based partitioned scheme and include numerical results that demonstrate its potential.

Dynamic mode decomposition (DMD)↗
DOE OSTI2016

Solving the Interface Problem in Criticality Analysis

In spent fuel pools, there are usually two or more disparate regions. One region may be dedicated to storing fresh fuel and the cells are further apart while another region is designed for burned fuel where the cells are relatively close together. The interaction across the interface between the two regions presents a criticality challenge. If the reactivity of a region increases due to the presence of the other region, then measures would have to be taken to mitigate the effect (such as removing fuel or inserting neutron absorbers at the interface). The interface between two disparate regions in the spent fuel pool must be examined to ensure that the interface does not increase k{sub eff} over the k{sub eff} of the individual regions. This can be done 1) by inspection, 2) by region separation, or 3) by direct calculation. When doing a direct calculation, the nominal k{sub eff} of each region by itself (before adding bias and uncertainty) needs to be the same so that the interface effect can be known. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Optimal local truncation error method for 3-D elasticity interface problems

The paper deals with a new effective numerical technique on unfitted Cartesian meshes for simulations of heterogeneous elastic materials. Here, we develop the optimal local truncation error method (OLTEM) with 27- point stencils (similar to those for linear finite elements) for the 3-D time-independent elasticity equations with irregular interfaces. Only displacement unknowns at each internal Cartesian grid point are used. The interface conditions are added to the expression for the local truncation error and do not change the width of the stencils. The unknown stencil coefficients are calculated by the minimization of the local truncation error of the stencil equations and yield the optimal second order of accuracy for OLTEM with the 27-point stencils on unfitted Cartesian meshes. A new post-processing procedure for accurate stress calculations has been developed. Similar to basic computations it uses OLTEM with the 27-point stencils and the elasticity equations. The post-processing procedure can be easily extended to unstructured meshes and can be independently used with existing numerical techniques (e.g., with finite elements). Numerical experiments show that at an accuracy of 0.1% for stresses, OLTEM with the new post-processing procedure significantly (by 10 5 -10 9 times) reduces the number of degrees of freedom compared to linear finite elements. OLTEM with the 27-point stencils yields even more accurate results than high-order finite elements with wider stencils.

42 ENGINEERING↗
DOE OSTI2021

Interface Aspects in All‐Solid‐State Li‐Based Batteries Reviewed

Abstract Extensive efforts have been made to improve the Li‐ionic conductivity of solid electrolytes (SE) for developing promising all‐solid‐state Li‐based batteries (ASSB). Recent studies suggest that minimizing the existing interface problems is even more important than maximizing the conductivity of SE. Interfaces are essential in ASSB, and their properties significantly influence the battery performance. Interface problems, arising from both physical and (electro)chemical material properties, can significantly inhibit the transport of electrons and Li‐ions in ASSB. Consequently, interface problems may result in interlayer formation, high impedances, immobilization of moveable Li‐ions, loss of active host sites available to accommodate Li‐ions, and Li‐dendrite formation, all causing significant storage capacity losses and ultimately battery failures. The characteristic differences of interfaces between liquid‐ and solid‐type Li‐based batteries are presented here. Interface types, interlayer origin, physical and chemical structures, properties, time evolution, complex interrelations between various factors, and promising interfacial tailoring approaches are reviewed. Furthermore, recent advances in the interface‐sensitive or depth‐resolved analytical tools that can provide mechanistic insights into the interlayer formation and strategies to tailor the interlayer formation, composition, and properties are discussed.

25 ENERGY STORAGE↗
NASA NTRS2013

Fracture Mechanics Analyses for Interface Crack Problems - A Review

Recent developments in fracture mechanics analyses of the interfacial crack problem are reviewed. The intent of the review is to renew the awareness of the oscillatory singularity at the crack tip of a bimaterial interface and the problems that occur when calculating mode mixity using numerical methods such as the finite element method in conjunction with the virtual crack closure technique. Established approaches to overcome the nonconvergence issue of the individual mode strain energy release rates are reviewed. In the recent literature many attempts to overcome the nonconvergence issue have been developed. Among the many approaches found only a few methods hold the promise of providing practical solutions. These are the resin interlayer method, the method that chooses the crack tip element size greater than the oscillation zone, the crack tip element method that is based on plate theory and the crack surface displacement extrapolation method. Each of the methods is validated on a very limited set of simple interface crack problems. However, their utility for a wide range of interfacial crack problems is yet to be established.

Krueger, Ronald↗
NASA NTRS1982

An implicit formulation for the one-dimensional two-phase multi-interface Stefan Problem

In recent years there has been an intensified effort in the analysis of the Stefan Problem. Particular interest is directed towards determining the location of the interface between the solid and liquid phases of the substance being analyzed. A method has been developed using an implicit finite difference scheme which provides an accurate calculation of the phase change interface locations for a problem with simultaneous multiple phases. This is achieved through an iterative technique which requires the phase change energy to be correctly distributed within the nodes which are undergoing a phase transition. The new method predicts the interface locations without requiring time step size control or node size modification at the interfaces.

Williams, S. D.↗
DOE OSTI2016

A multiscale flux basis for mortar mixed discretizations of Stokes–Darcy flows

A multiscale flux basis algorithm is developed for the Stokes–Darcy flow problem. The method is based on a non-overlapping domain decomposition algorithm, where the global problem is reduced to a coarse scale mortar interface problem that is solved by an iterative solver. Subdomain solves are required at each interface iteration, so the cost for the method without a multiscale basis can be high when the number of subdomains or the condition number of the interface problem is large. Here the proposed algorithm involves precomputing a multiscale flux basis, which consists of the flux (or velocity trace) response from each mortar degree of freedom. It is computed by each subdomain independently before the interface iteration begins. The subdomain solves required at each iteration are substituted by a linear combination of the multiscale basis. This may lead to a significant reduction in computational cost since the number of subdomain solves is fixed, depending only on the number of mortar degrees of freedom associated with a subdomain. Several numerical examples are carried out to demonstrate the efficiency of the multiscale flux basis implementation for large-scale Stokes–Darcy problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Parallel FETI‐DP algorithm for efficient simulation of large‐scale EM problems

Summary An efficient parallelization of the dual‐primal finite‐element tearing and interconnecting (FETI‐DP) algorithm is presented for large‐scale electromagnetic simulations. As a nonoverlapping domain decomposition method, the FETI‐DP algorithm formulates a global interface problem, whose iterative solution is accelerated with a solution of a global corner problem. To achieve a good load balance for parallel computation, the original computational domain is decomposed into subdomains with similar sizes and shapes. The subdomains are then distributed to processors based on their close proximity to minimize inter‐processor communication. The parallel generalized minimal residual method, enhanced with the iterative classical Gram‐Schmidt orthogonalization scheme to reduce global communication, is adopted to solve the global interface problem with a fast convergence rate. The global corner‐related coarse problem is solved iteratively with a parallel communication‐avoiding biconjugate gradient stabilized method to minimize global communication, and its convergence is accelerated by a diagonal preconditioner constructed from the coarse system matrix. To alleviate neighboring communication overhead, the non‐blocking communication approach is employed in both generalized minimal residual and communication‐avoiding biconjugate gradient stabilized iterative solutions. Three numerical examples are presented to demonstrate the accuracy, scalability, and capability of the proposed parallel FETI‐DP algorithm for electromagnetic modeling of general objects and antenna arrays. Copyright © 2016 John Wiley & Sons, Ltd.

Zhang, Kedi↗
DOE OSTI2017

Level set topology optimization of structural problems with interface cohesion

Summary This paper presents a finite element topology optimization framework for the design of two‐phase structural systems considering contact and cohesion phenomena along the interface. The geometry of the material interface is described by an explicit level set method, and the structural response is predicted by the extended finite element method. In this work, the interface condition is described by a bilinear cohesive zone model on the basis of the traction‐separation constitutive relation. The non‐penetration condition in the presence of compressive interface forces is enforced by a stabilized Lagrange multiplier method. The mechanical model assumes a linear elastic isotropic material, infinitesimal strain theory, and a quasi‐static response. The optimization problem is solved by a nonlinear programming method, and the design sensitivities are computed by the adjoint method. The performance of the presented method is evaluated by 2D and 3D numerical examples. The results obtained from topology optimization reveal distinct design characteristics for the various interface phenomena considered. In addition, 3D examples demonstrate optimal geometries that cannot be fully captured by reduced dimensionality. The optimization framework presented is limited to two‐phase structural systems where the material interface is coincident in the undeformed configuration, and to structural responses that remain valid considering small strain kinematics. Copyright © 2017 John Wiley & Sons, Ltd.

Behrou, Reza↗