Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interleaved Codes Concatenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Cut-off rate calculations for the outer channel in a concatenated cooling system

Concatenated codes were long used as a practical means of achieving long block or constraint lengths for combating errors on very noisy channels. The inner and outer encoders are normally separated by an interleaver, so that decoded error bursts coming from the inner decoder are randomized before entering the outer decoder. The effectiveness of this interleaver is examined by calculating the cut-off rate of the outer channel seen by the outer decoder with and without interleaving. Interleaving never hurts the performance of a concatenated code, and when the inner code rate is near the cut-off rate of the inner channel, interleaving significantly improves code performance.

Herro, M. A.↗
NASA NTRS1991

Frame error rate of the NASA concatenated coding system

For a concatenated coding system, the effect of interleaving depth on interleaved frame-error rate is compiled by simulation. Comparisons are made for three different inner convolutional codes; all three systems have a (255,223) 8-bit Reed-Solomon code as an outer code. For all the inner convolutional codes tested, an interleaving depth smaller that 4 causes substantial loss.

Swanson, L.↗
NASA NTRS1990

Advanced communications payload for mobile applications

An advanced satellite payload is proposed for single hop linking of mobile terminals of all classes as well as Very Small Aperture Terminal's (VSAT's). It relies on an intensive use of communications on-board processing and beam hopping for efficient link design to maximize capacity and a large satellite antenna aperture and high satellite transmitter power to minimize the cost of the ground terminals. Intersatellite links are used to improve the link quality and for high capacity relay. Power budgets are presented for links between the satellite and mobile, VSAT, and hub terminals. Defeating the effects of shadowing and fading requires the use of differentially coherent demodulation, concatenated forward error correction coding, and interleaving, all on a single link basis.

Ames, S. A.↗
NASA NTRS1999

Punctured Parallel and Serial Concatenated Convolutional Codes for BPSK/QPSK Channels

As available bandwidth for communication applications becomes scarce, bandwidth-efficient modulation and coding schemes become ever important. Since their discovery in 1993, turbo codes (parallel concatenated convolutional codes) have been the center of the attention in the coding community because of their bit error rate performance near the Shannon limit. Serial concatenated convolutional codes have also been shown to be as powerful as turbo codes. In this dissertation, we introduce algorithms for designing bandwidth-efficient rate r = k/(k + 1),k = 2, 3,..., 16, parallel and rate 3/4, 7/8, and 15/16 serial concatenated convolutional codes via puncturing for BPSK/QPSK (Binary Phase Shift Keying/Quadrature Phase Shift Keying) channels. Both parallel and serial concatenated convolutional codes have initially, steep bit error rate versus signal-to-noise ratio slope (called the -"cliff region"). However, this steep slope changes to a moderate slope with increasing signal-to-noise ratio, where the slope is characterized by the weight spectrum of the code. The region after the cliff region is called the "error rate floor" which dominates the behavior of these codes in moderate to high signal-to-noise ratios. Our goal is to design high rate parallel and serial concatenated convolutional codes while minimizing the error rate floor effect. The design algorithm includes an interleaver enhancement procedure and finds the polynomial sets (only for parallel concatenated convolutional codes) and the puncturing schemes that achieve the lowest bit error rate performance around the floor for the code rates of interest.

Acikel, Omer Fatih↗
NASA NTRS2004

Serial-Turbo-Trellis-Coded Modulation with Rate-1 Inner Code

Serially concatenated turbo codes have been proposed to satisfy requirements for low bit- and word-error rates and for low (in comparison with related previous codes) complexity of coding and decoding algorithms and thus low complexity of coding and decoding circuitry. These codes are applicable to such high-level modulations as octonary phase-shift keying (8PSK) and 16-state quadrature amplitude modulation (16QAM); the signal product obtained by applying one of these codes to one of these modulations is denoted, generally, as serially concatenated trellis-coded modulation (SCTCM). These codes could be particularly beneficial for communication systems that must be designed and operated subject to limitations on bandwidth and power. Some background information is prerequisite to a meaningful summary of this development. Trellis-coded modulation (TCM) is now a well-established technique in digital communications. A turbo code combines binary component codes (which typically include trellis codes) with interleaving. A turbo code of the type that has been studied prior to this development is composed of parallel concatenated convolutional codes (PCCCs) implemented by two or more constituent systematic encoders joined through one or more interleavers. The input information bits feed the first encoder and, after having been scrambled by the interleaver, enter the second encoder. A code word of a parallel concatenated code consists of the input bits to the first encoder followed by the parity check bits of both encoders. The suboptimal iterative decoding structure for such a code is modular, and consists of a set of concatenated decoding modules one for each constituent code connected through an interleaver identical to the one in the encoder side. Each decoder performs weighted soft decoding of the input sequence. PCCCs yield very large coding gains at the cost of a reduction in the data rate and/or an increase in bandwidth.

Divsalar, Dariush↗
NASA NTRS1997

Turbo Trellis Coded Modulation With Iterative Decoding for Mobile Satellite Communications

In this paper, analytical bounds on the performance of parallel concatenation of two codes, known as turbo codes, and serial concatenation of two codes over fading channels are obtained. Based on this analysis, design criteria for the selection of component trellis codes for MPSK modulation, and a suitable bit-by-bit iterative decoding structure are proposed. Examples are given for throughput of 2 bits/sec/Hz with 8PSK modulation. The parallel concatenation example uses two rate 4/5 8-state convolutional codes with two interleavers. The convolutional codes' outputs are then mapped to two 8PSK modulations. The serial concatenated code example uses an 8-state outer code with rate 4/5 and a 4-state inner trellis code with 5 inputs and 2 x 8PSK outputs per trellis branch. Based on the above mentioned design criteria for fading channels, a method to obtain he structure of the trellis code with maximum diversity is proposed. Simulation results are given for AWGN and an independent Rayleigh fading channel with perfect Channel State Information (CSI).

Divsalar, D.↗
NASA NTRS1995

Coded throughput performance simulations for the time-varying satellite channel

The design of a reliable satellite communication link involving the data transfer from a small, low-orbit satellite to a ground station, but through a geostationary satellite, was examined. In such a scenario, the received signal power to noise density ratio increases as the transmitting low-orbit satellite comes into view, and then decreases as it then departs, resulting in a short-duration, time-varying communication link. The optimal values of the small satellite antenna beamwidth, signaling rate, modulation scheme and the theoretical link throughput (in bits per day) have been determined. The goal of this thesis is to choose a practical coding scheme which maximizes the daily link throughput while satisfying a prescribed probability of error requirement. We examine the throughput of both fixed rate and variable rate concatenated forward error correction (FEC) coding schemes for the additive white Gaussian noise (AWGN) channel, and then examine the effect of radio frequency interference (RFI) on the best coding scheme among them. Interleaving is used to mitigate degradation due to RFI. It was found that the variable rate concatenated coding scheme could achieve 74 percent of the theoretical throughput, equivalent to 1.11 Gbits/day based on the cutoff rate R(sub 0). For comparison, 87 percent is achievable for AWGN-only case.

Han, LI↗
NASA NTRS1995

On the design of turbo codes

In this article, we design new turbo codes that can achieve near-Shannon-limit performance. The design criterion for random interleavers is based on maximizing the effective free distance of the turbo code, i.e., the minimum output weight of codewords due to weight-2 input sequences. An upper bound on the effective free distance of a turbo code is derived. This upper bound can be achieved if the feedback connection of convolutional codes uses primitive polynomials. We review multiple turbo codes (parallel concatenation of q convolutional codes), which increase the so-called 'interleaving gain' as q and the interleaver size increase, and a suitable decoder structure derived from an approximation to the maximum a posteriori probability decision rule. We develop new rate 1/3, 2/3, 3/4, and 4/5 constituent codes to be used in the turbo encoder structure. These codes, for from 2 to 32 states, are designed by using primitive polynomials. The resulting turbo codes have rates b/n (b = 1, 2, 3, 4 and n = 2, 3, 4, 5, 6), and include random interleavers for better asymptotic performance. These codes are suitable for deep-space communications with low throughput and for near-Earth communications where high throughput is desirable. The performance of these codes is within 1 dB of the Shannon limit at a bit-error rate of 10(exp -6) for throughputs from 1/15 up to 4 bits/s/Hz.

Divsalar, D.↗
NASA NTRS1993

Enhanced decoding for the Galileo S-band mission

A coding system under consideration for the Galileo S-band low-gain antenna mission is a concatenated system using a variable redundancy Reed-Solomon outer code and a (14,1/4) convolutional inner code. The 8-bit Reed-Solomon symbols are interleaved to depth 8, and the eight 255-symbol codewords in each interleaved block have redundancies 64, 20, 20, 20, 64, 20, 20, and 20, respectively (or equivalently, the codewords have 191, 235, 235, 235, 191, 235, 235, and 235 8-bit information symbols, respectively). This concatenated code is to be decoded by an enhanced decoder that utilizes a maximum likelihood (Viterbi) convolutional decoder; a Reed Solomon decoder capable of processing erasures; an algorithm for declaring erasures in undecoded codewords based on known erroneous symbols in neighboring decodable words; a second Viterbi decoding operation (redecoding) constrained to follow only paths consistent with the known symbols from previously decodable Reed-Solomon codewords; and a second Reed-Solomon decoding operation using the output from the Viterbi redecoder and additional erasure declarations to the extent possible. It is estimated that this code and decoder can achieve a decoded bit error rate of 1 x 10(exp 7) at a concatenated code signal-to-noise ratio of 0.76 dB. By comparison, a threshold of 1.17 dB is required for a baseline coding system consisting of the same (14,1/4) convolutional code, a (255,223) Reed-Solomon code with constant redundancy 32 also interleaved to depth 8, a one-pass Viterbi decoder, and a Reed Solomon decoder incapable of declaring or utilizing erasures. The relative gain of the enhanced system is thus 0.41 dB. It is predicted from analysis based on an assumption of infinite interleaving that the coding gain could be further improved by approximately 0.2 dB if four stages of Viterbi decoding and four levels of Reed-Solomon redundancy are permitted. Confirmation of this effect and specification of the optimum four-level redundancy profile for depth-8 interleaving is currently being done.

Dolinar, S.↗
NASA NTRS2010

Serial turbo trellis coded modulation using a serially concatenated coder

Serial concatenated trellis coded modulation (SCTCM) includes an outer coder, an interleaver, a recursive inner coder and a mapping element. The outer coder receives data to be coded and produces outer coded data. The interleaver permutes the outer coded data to produce interleaved data. The recursive inner coder codes the interleaved data to produce inner coded data. The mapping element maps the inner coded data to a symbol. The recursive inner coder has a structure which facilitates iterative decoding of the symbols at a decoder system. The recursive inner coder and the mapping element are selected to maximize the effective free Euclidean distance of a trellis coded modulator formed from the recursive inner coder and the mapping element. The decoder system includes a demodulation unit, an inner SISO (soft-input soft-output) decoder, a deinterleaver, an outer SISO decoder, and an interleaver.

Divsalar, Dariush↗
NASA NTRS2011

Serial turbo trellis coded modulation using a serially concatenated coder

Serial concatenated trellis coded modulation (SCTCM) includes an outer coder, an interleaver, a recursive inner coder and a mapping element. The outer coder receives data to be coded and produces outer coded data. The interleaver permutes the outer coded data to produce interleaved data. The recursive inner coder codes the interleaved data to produce inner coded data. The mapping element maps the inner coded data to a symbol. The recursive inner coder has a structure which facilitates iterative decoding of the symbols at a decoder system. The recursive inner coder and the mapping element are selected to maximize the effective free Euclidean distance of a trellis coded modulator formed from the recursive inner coder and the mapping element. The decoder system includes a demodulation unit, an inner SISO (soft-input soft-output) decoder, a deinterleaver, an outer SISO decoder, and an interleaver.

Divsalar, Dariush↗
NASA NTRS2006

An Interleaver Implementation for the Serially Concatenated Pulse-Position Modulation Decoder

We describe novel interleaver and deinterleaver architectures that support bandwidth efficient memory access for decoders of turbo-like codes that are used in conjunction with high order modulations. The presentation focuses on a decoder for serially concatenated pulse-position modulation (SCPPM), which is a forward-error-correction code designed by NASA to support laser communications from Mars at more than 50 megabits-per-second (Mbps). For 64-ary PPM, the new architectures effectively triple the fan-in of the interleaver and fan-out of the deinterleaver, enabling parallelization that doubles the overall throughput. The techniques described here can be readily modified for other PPM orders.

turbo decoding↗
NASA NTRS1994

Error coding simulations in C

When data is transmitted through a noisy channel, errors are produced within the data rendering it indecipherable. Through the use of error control coding techniques, the bit error rate can be reduced to any desired level without sacrificing the transmission data rate. The Astrionics Laboratory at Marshall Space Flight Center has decided to use a modular, end-to-end telemetry data simulator to simulate the transmission of data from flight to ground and various methods of error control. The simulator includes modules for random data generation, data compression, Consultative Committee for Space Data Systems (CCSDS) transfer frame formation, error correction/detection, error generation and error statistics. The simulator utilizes a concatenated coding scheme which includes CCSDS standard (255,223) Reed-Solomon (RS) code over GF(2(exp 8)) with interleave depth of 5 as the outermost code, (7, 1/2) convolutional code as an inner code and CCSDS recommended (n, n-16) cyclic redundancy check (CRC) code as the innermost code, where n is the number of information bits plus 16 parity bits. The received signal-to-noise for a desired bit error rate is greatly reduced through the use of forward error correction techniques. Even greater coding gain is provided through the use of a concatenated coding scheme. Interleaving/deinterleaving is necessary to randomize burst errors which may appear at the input of the RS decoder. The burst correction capability length is increased in proportion to the interleave depth. The modular nature of the simulator allows for inclusion or exclusion of modules as needed. This paper describes the development and operation of the simulator, the verification of a C-language Reed-Solomon code, and the possibility of using Comdisco SPW(tm) as a tool for determining optimal error control schemes.

Noble, Viveca K.↗
NASA NTRS1990

VLSI single-chip (255,223) Reed-Solomon encoder with interleaver

The invention relates to a concatenated Reed-Solomon/convolutional encoding system consisting of a Reed-Solomon outer code and a convolutional inner code for downlink telemetry in space missions, and more particularly to a Reed-Solomon encoder with programmable interleaving of the information symbols and code correction symbols to combat error bursts in the Viterbi decoder.

Hsu, In-Shek↗
NASA NTRS1999

High-Performance, Low-Complexity Codes Researched for Communication Channels

NASA Lewis Research Center s Communications Technology Division has an ongoing program in the development of efficient channel coding schemes for satellite communications applications. Through a university grant, as a part of this research, the University of Toledo is investigating the performance of turbocodes, which use parallel concatenation of non-systematic convolutional encoders with an interleaver. The error correcting capacity of these codes is close to the Shannon limit. The research emphasis is on the development of low-complexity, but higher rate (greater than one half), turbocodes and on the iterative decoding of block codes.

Kwatra, Subhash C.↗
NASA NTRS1988

Capacity and cutoff rate calculations for a concatenated coding system

A model is developed for a concatenated coding system, and from it the overall channel cutoff rate and capacity is found using random coding arguments. The effects of interleaving between the inner and outer codes and of the availability of side information to the outer decoder are considered. The performance of several specific concatenated coding systems is calculated and used for comparison with the random coding results. From the analysis, a number of general conclusions regarding the design of concatenated coding systems are presented. All the results are derived assuming a block inner code.

Herro, Mark A.↗
NASA NTRS1989

Orbital maneuvering vehicle teleoperation and video data compression

The Orbital Maneuvering Vehicle (OMV) and concepts of teleoperation and video data compression as applied to OMV design and operation are described. The OMV provides spacecraft delivery, retrieval, reboost, deboost and viewing services, with ground-control or Space Station operation, through autonomous navigation and pilot controlled maneuvers. Communications systems are comprised of S-band RF command, telemetry, and compressed video data links through the TDRSS and GSTDN networks. The control console video monitors display a monochrome image at an update rate of five frames per second. Depending upon the mode of operation selected by the pilot, the video resolution is either 255 x 244 pixels, or 510 x 244 pixels. Since practically all video image redundancy is removed by the compression process, the video reconstruction is particularly sensitive to data transmission bit errors. Concatenated Reed-Solomon and convolution coding are used with helical data interleaving for error detection and correction, and an error-containment process minimizes the propagation of error effects throughout the video image. Video sub-frame replacement is used, in the case of a non-correctable error or error burst, to minimize the visual impact to the pilot.

Jones, Steve↗