Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inverse Multiplication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Solving Inverse Transport Problems with Neutron Multiplication Measurements and Improved Differential Evolution

In the problem of inverse radiation transport, measurements of particle leakages from radioactive source/shield systems are used to infer unknown parameters within the systems. This reconstruction can be accomplished by finding the physical parameters of the unknown system that minimize the difference between calculated detector responses and measured detector responses. Recently, the differential evolution (DE) method was shown to be highly adept at solving inverse transport problems in which the measured quantities were leakages of unscattered gamma-ray lines. In this work, we present an extension of the DE method to problems in which both gamma-ray lines and neutron multiplication are measured. The neutron multiplication measurement is demonstrated to be an important addition when few gamma-ray lines are available. We also discuss the implementation of a variant of DE that significantly reduces the number of forward transport computations required to solve the inverse problem.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Application of Polynomial Chaos Expansion in Inverse Transport Problems with Neutron Multiplication Measurements and Multiple Unknowns

The polynomial chaos expansion (PCE) technique is used to build surrogate models of the dependences of gamma-ray fluxes and neutron multiplication to unknown physical parameters in radiological source/shield systems. These surrogate models are used with the DiffeRential Evolution Adaptive Metropolis (DREAM) method to solve and quantify uncertainty in inverse transport problems. Measured data in the inverse problems includes both passive gamma rays and neutron multiplication. The PCE approach is shown to increase the speed of DREAM by factors of greater than 80 while not degrading the accuracy of the solution.

Bledsoe, Keith↗

Application of polynomial chaos expansion in inverse transport problems with neutron multiplication measurements and multiple unknowns - 25623

The polynomial chaos expansion technique is used to build surrogate models of the dependences of gamma-ray fluxes and neutron multiplication to unknown physical parameters in radiological source/shield systems. These surrogate models are used with the Differential Evolution Adaptive Metropolis (DREAM), a method to solve and quantify uncertainty in inverse transport problems. Measured data in the inverse problems includes both passive gamma rays and neutron multiplication. The polynomial chaos expansion approach is shown to increase the speed of DREAM by factors of greater than 60 while not degrading the accuracy of the solution. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Multiple-objective Reinforcement Learning for Inverse Design and Identification

The aim of inverse chemical design is to develop new molecules with given optimized molecular properties or objectives. Recently, generative deep learning (DL) networks are considered as the state-of-the-art in inverse chemical design and have achieved early success in generating molecular structures with desired properties in the pharmaceutical and material chemistry fields. However, satisfying a large number (> 10 objectives) of molecular objectives is a limitation of current generative models. To improve the model’s ability to handle a large number of molecule design objectives, we developed a Reinforcement Learning (RL) based generative framework to optimize chemical molecule generation. Our use of Curriculum Learning (CL) to fine-tune the pre-trained generative network allowed the model to satisfy up to 21 objectives and increase the generative network’s robustness. The experiments show that the proposed multiple-objective RL-based generative model can correctly identify unknown molecules with an 83% to 100% success rate, compared to the baseline approach of 0%. Additionally, this proposed generative model is not limited to just chemistry research challenges; we anticipate that problems that utilize RL with multiple objectives will benefit from this framework.

reinforcement learning, generative model, inverse ↗

Improvements in Earthquake Location from Joint Inversion of Seismic and Gravity Observations – Application to the Iran Region

These are slides which show many graphs and datasets for the above-mentioned topic and then concludes with the following: Joint inversion of multiple geophysical datasets improves recovery of velocity structures, particularly in Vs and in shallow parts of the model, in comparison to travel-time only models. Resulting fits to travel time data are minimally degraded by joint inversions. Correspondingly, fits to independent estimates of ground-truth locations are minimally affected by joint inversions.

58 GEOSCIENCES↗

Multiple-objective Reinforcement Learning for Inverse Design and Identification

Inverse chemical design using generative deep learning (DL) models is an emerging tool, which has early success in generating molecular structures with desired properties. We enhance this tool by developing heuristics for curriculum-learning based multiple-objective (20+ objectives) reinforcement learning, and apply it to the context of chemical identi?cation. We develop a generative DL framework that utilizes constraints pertaining to the unknown molecule’s mass and functional group composition, and show that multiple-objective RL-based generative DL models can correctly identify unknown molecules with a 80% success rate, compared to the baseline approach of 0%. Lastly, the heuristics developed are not limited to just chemistry research challenges; we anticipate any problem that utilizes reinforcement learning with multiple-objectives will bene?t from it.

Artificial Intelligence, Data Science, deep learni↗

Acoustic Impedance Inversions for Offshore CO 2 Storage: South Georgia Embayment, United States

This study builds and expands on previous CO 2 storage resource assessment studies of the southeastern offshore Atlantic margin by providing a detailed evaluation on how rock porosities and permeabilities are distributed across the Upper Cretaceous strata restricted to the South Georgia Embayment (SGE). Using legacy industry two-dimensional seismic reflection and well data, this assessment is the first application of multiple seismic inversion techniques in this area. This workflow provides a reliable and repeatable model-based inversion which gives an improved image to discriminate lithology and predict porosity. The workflow is applicable to future CO 2 storage resource assessment studies elsewhere. The inversion results indicate that distinct porosity and permeability regimes are present and distributed in the Upper Cretaceous strata within the SGE. The impedance and porosity relationships show well-founded and reliable correlation. These relationships reveal low impedance coincident to the high porosity intervals which are proposed as potential reservoir intervals for CO 2 storage. In addition, the result shows that the Upper Cretaceous strata have two main potential reservoirs in the lower part. These are overlain by a thick impermeable interval, mostly shale, which has high impedance, low porosity, and low permeability and extends within the SGE. This result is in agreement with a previous study that also proposed two significant storage reservoirs for CO 2 in the Upper Cretaceous strata. Since porosity distribution is estimated using multiple methods, it follows the trends of seismic signature and structures of the Upper Cretaceous strata. The extracted values of porosity, ranging from 15 to 36%, and permeability, ranging from 1 to 100 mD, are close to the measured values from the well core data at the Upper Cretaceous strata interval.

54 ENVIRONMENTAL SCIENCES↗

A New Capability of E4D For 3D Parallel Joint Inversion of DC Resistivity And Traveltime Data on Unstructured Mesh

A major challenge in interpreting geophysical data is how to derive consistent three-dimensional (3D) earth models of different physical properties from spatially and temporally limited measurements. Joint inversion with cross-gradient constraints is an approach to find such models by imposing structural similarities between different physical parameters. We have developed a parallel distributed-memory joint inversion code for direct-current (DC) resistivity and traveltime data using the cross-gradient constraint on unstructured mesh. The code utilizes existing E4D framework for parallel forward simulation, distributed storage and computation of the Jacobian matrix of forward operator, and parallel execution of matrix-vector multiplication during inversion. Besides, the joint inversion is solved by nonlinear conjugate gradient algorithm parallelized for DC resistivity and traveltime data. The joint inversion capability of E4D was tested using synthetic data from cross-borehole DC resistivity and traveltime data. The results indicate that the shape and size of the anomalies from the joint inversion are more reliable than those from separate inversions.

58 GEOSCIENCES↗

Sol–gel preparation of well-adhered films and long range ordered inverse opal films of BaTiO{sub 3} and Bi{sub 2}Ti{sub 2}O{sub 7}

Highlights: • Highly adaptable sols are presented for processing of the electroceramic materials BaTiO{sub 3} and Bi{sub 2}Ti{sub 2}O{sub 7}. • High quality thin films are produced by dip coating with good phase control. • Infiltration of cross-linked polystyrene templates led to high quality inverse opals. - Abstract: Barium and bismuth titanate thin films and well-ordered inverse opal films are produced by dip coating from sols containing titanium alkoxides with acetic acid, acetylacetone, methoxyethanol and water. The inverse opal preparations used crosslinked polystyrene opal templates. Heat treatment in air produced tetragonal BaTiO{sub 3} or mixtures of the hexagonal and tetragonal phases, or phase pure Bi{sub 2}Ti{sub 2}O{sub 7}. Good quality films were obtained with a thickness of 5 μm from a single dipping, and the thickness could be increased by dipping multiple times. Inverse opals were well ordered and exhibited opalescence and photonic stop band effects.

36 MATERIALS SCIENCE↗

BCYCLIC: A PARALLEL BLOCK TRIDIAGONAL MATRIX CYCLIC SOLVER

A block tri-diagonal matrix is factored with minimal fill-in using a cyclic reduction algorithm that is easily parallelized. Storage of the factored blocks allows the application of the inverse to multiple right-hand sides which may not be known at factorization time. Scalability with the number of block rows is achieved with cyclic reduction, while scalability with the block size is achieved using multithreaded routines (OPENMP, GotoBLAS) for block matrix manipulation. This dual scalability is a noteworthy feature of this new solver, as well as its ability to handle arbitrary block row and processor numbers. Comparisons with other parallel block solvers are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A new double-foil soft x-ray array to measure T{sub e} on the MST reversed field pinch

A soft x-ray (SXR) diagnostic to measure electron temperature on the Madison Symmetric Torus using two complementary methods is presented. Both methods are based on the double-foil technique, which calculates electron temperature via the ratio of SXR bremsstrahlung emission from the plasma in two different energy ranges. The tomographic emissivity method applies the double-foil technique to a tomographic reconstruction of SXR emissivity, creating a two-dimensional map of temperature throughout the plasma. In contrast, the direct brightness method applies the double-foil technique directly to the measured brightness and generates vertical and horizontal radial profiles. Extensive modeling demonstrates advantages and limitations in both techniques. For example, although the emissivity technique provides a two-dimensional mapping of temperature, its reliance on multiple tomographic inversions introduces some artifacts into the results. On the other hand, the more direct brightness technique avoids these artifacts but is only able to provide a radial profile of electron temperature.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE ZEEMAN EFFECT IN THE SOBOLEV APPROXIMATION: SPLIT MONOPOLE FIELDS AND THE 'HEARTBEAT' STOKES V PROFILE

We calculate the circularly polarized Stokes V(lambda) profile for emission lines, formed in hot-star winds threaded with a weak radial magnetic field. For simplicity, the field is treated as a split monopole under the assumptions that it has been radially combed by the wind, and rotation is not playing a central role. Invoking the weak-field approximation, we find that the V(lambda) profile has a characteristic 'heartbeat' shape exhibiting multiple sign inversions, which might be mistaken for noise in the absence of theoretical guidance. We also conclude that there is a tendency for the V(lambda) profile to integrate to zero on each side of the line separately. The overall scale of V(lambda)/I(lambda) is set by the ratio of the field strength to the flow speed, B/v, characteristic of the line-forming region, and is of the order of 0.1% for a wind magnetic field B approx = 100G at depths where the wind speed is v approx = 100 km s{sup -1}.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiple magnetic interactions and large inverse magnetocaloric effect in TbSi and TbSi 0.6 Ge 0.4

We present a comprehensive investigation of the electronic structure, magnetization, specific heat, and crystallography of TbSi (FeB structure type) and TbSi 0.6 ⁢Ge 0.4 (CrB structure type) compounds. Both TbSi and TbSi 0.6 ⁢Ge 0.4 exhibit two antiferromagnetic (AFM) transitions at T N⁢1 ≈ 58 and 57 K, and T N⁢2 ≈ 36 and 44 K, respectively, along with an onset of weak metamagneticlike transition around 6 T between T N⁢1 and T N⁢2 . High-resolution specific heat (C P ) measurements show the second- and first-order nature of the magnetic transition at T N⁢1 and T N⁢2 , respectively, for both samples. However, in the case of TbSi, the low-temperature (LT) AFM to high-temperature (HT) AFM transition takes place via an additional AFM phase at the intermediate temperature (IT), where both LT to IT AFM and IT to HT AFM phase transitions exhibit a first-order nature. Both TbSi and TbSi 0.6 ⁢Ge 0.4 manifest significant magnetic entropy changes (Δ⁢S M ) of 9.6 and 11.6 J/kg-K, respectively, for Δ⁢μ 0 ⁢H=7 T, at T N⁢2 . The HT AFM phase of TbSi 0.6 ⁢Ge 0.4 is found to be more susceptible to the external magnetic field, causing a significant broadening in the peaks of Δ⁢S M curves at higher magnetic fields. Temperature- and field-dependent specific-heat data have been utilized to construct the complex HT phase diagram of these compounds. As a result, temperature-dependent x-ray diffraction measurements demonstrate substantial magnetostriction and anisotropic thermal expansion of the unit cell in both samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Primitive quantum gates for dihedral gauge theories

We describe the simulation of dihedral gauge theories on digital quantum computers. The nonabelian discrete gauge group $D_N$-- the dihedral group -- serves as an approximation to $U(1)\times\mathbb{Z}_2$ lattice gauge theory. In order to carry out such a lattice simulation, we detail the construction of efficient quantum circuits to realize basic primitives including the nonabelian Fourier transform over $D_N$, the trace operation, and the group multiplication and inversion operations. For each case the required quantum resources scale linearly or as low-degree polynomials in $n=\log N$. We experimentally benchmark our gates on the Rigetti Aspen-9 quantum processor for the case of $D_4$. The fidelity of all $D_4$ gates was found to exceed $80\%$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum Time-Space Tradeoffs for Matrix Problems

We consider the time and space required for quantum computers to solve a wide variety of problems involving matrices, many of which have only been analyzed classically in prior work. Our main results show that for a range of linear algebra problems—including matrix-vector product, matrix inversion, matrix multiplication and powering—existing classical time-space tradeoffs, several of which are tight for every space bound, also apply to quantum algorithms with at most a constant factor loss. For example, for almost all fixed matrices 𝐴, including the discrete Fourier transform matrix, we prove that quantum circuits with at most 𝑇 input queries and 𝑆 qubits of memory require 𝑇 = Ω⁢(𝑛 2 /𝑆) to compute matrix-vector product 𝐴⁢𝑥 for 𝑥 ∈{0,1 𝑛 . We similarly prove that matrix multiplication for 𝑛 ×𝑛 binary matrices requires 𝑇 = Ω⁢(𝑛 3 /$\sqrt{𝑆}$). Because many of our lower bounds are matched by deterministic algorithms with the same time and space complexity, our results show that quantum computers cannot provide any asymptotic advantage for these problems with any space bound. We obtain matching lower bounds for the stronger notion of quantum cumulative memory complexity—the sum of the space per layer of a circuit. We also consider Boolean (i.e., AND-OR) matrix multiplication and matrix-vector products, improving the previous quantum time-space tradeoff lower bounds for 𝑛 × 𝑛 Boolean matrix multiplication to 𝑇 = Ω⁢(𝑛 2.5 /𝑆 1/4 ) from 𝑇 = Ω⁢(𝑛 2.5 /𝑆 1/2 ). Our improved lower bound for Boolean matrix multiplication is based on a new coloring argument that extracts more from the strong direct product theorem that was the basis for prior work. To obtain our tight lower bounds for linear algebra problems, we require much stronger bounds than strong direct product theorems. We obtain these bounds by adding a new bucketing method to the quantum recording-query technique of Zhandry that lets us apply classical arguments to upper bound the success probability of quantum circuits.

lower bounds↗

Small ncRNA Expression-Profiling of Blood from Hemophilia A Patients Identifies miR-1246 as a Potential Regulator of Factor 8 Gene

Hemophilia A (HA) is a bleeding disorder caused by deficiency of functional plasma clotting factor VIII (FVIII). Genetic mutations in the gene encoding FVIII (F8) have been extensively studied. Over a thousand different mutations have been reported in the F8 gene. These span a diverse range of mutation types, namely, missense, splice-site, deletions of single and multiple exons, inversions, etc. There is nonetheless evidence that other molecular mechanisms, in addition to mutations in the gene encoding the FVIII protein, may be involved in the pathobiology of HA. In this study, global small ncRNA expression profiling analysis of whole blood from HA patients, and controls, was performed using high-throughput ncRNA microarrays. Patients were further sub-divided into those that developed neutralizing-anti-FVIII antibodies (inhibitors) and those that did not. Selected differentially expressed ncRNAs were validated by quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analysis. We identified several ncRNAs, and among them hsa-miR1246 was significantly up-regulated in HA patients. In addition, miR-1246 showed a six-fold higher expression in HA patients without inhibitors. We have identified an miR-1246 target site in the noncoding region of F8 mRNA and were able to confirm the suppressory role of hsa-miR-1246 on F8 expression in a stable lymphoblastoid cell line expressing FVIII. These findings suggest several testable hypotheses vis-à-vis the role of nc-RNAs in the regulation of F8 expression. These hypotheses have not been exhaustively tested in this study as they require carefully curated clinical samples.

60 APPLIED LIFE SCIENCES↗