Search NASA⌕ Search

SEARCH · Search NASA

Results for “Isotope generator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Two-watt radioisotope power generators for underwater applications

Materials and design considerations are discussed for a low-cost, reliable radio-isotope-fueled thermoelectric generator for use in an undersea application. Plutonium has been selected as fuel, and the generator has to meet design goals of 2 watts after 20 years with a direct output voltage of 6-8 volts. The pressed and sintered form of Bi2Te3 appears to be the most appropriate thermoelectric material. Both fibrous and multilayer foil insulation could be used with proper processing and quality control, but there is less risk with fibrous type insulation. Min-K 1400 is recommended with a nitrogen cover gas. The heat source recommended is a three-layer capsule using T-111 for both the liner and strength member with an outer liner of Hastelloy-C.

Caputo, R. S.↗

A Chlorine Isotope Transect Across the Sudbury Impact Deposits Reveals Enigmatic Isotopic Fractionation

Volatile elements play an important role in a variety of cosmochemical and geochemical processes. As such, there has been significant interest in their abundance and isotopic composition. Chlorine is an important element for tracing these processes because it is incompatible in nearly all minerals, extremely volatile, and strongly hydrophilic [1]. The Cl isotope composition ( 37 Cl/ 35 Cl) of meteoritic components, therefore, can provide useful information regarding the isotopic reservoirs that were present in the early Solar System and any secondary processes that may have occurred on different parent bodies (e.g., [2-4]). There is a relatively narrow range in the Cl isotope compositions of terrestrial, Martian, and chondritic meteorites (δ 37 Cl ~ −6 to +4‰) (e.g., [2,3,5,6]), with exceptions to this being the Moon and Vesta (up to ~ +81‰ and ~ +40‰, respectively) [4, 5, 7-10]. One hypothesis for the extreme Cl isotope fractionation observed on the Moon is degassing following large-scale (possibly even crust-breaching) impact events [7-9]. The role of hypervelocity impacts and impact-generated magmatism in the isotopic evolution of planetary materials, however, has been until recently an area of limited published research with the majority of works focusing on the effects of impact shock (e.g., [10-13]). The ~ 1.85 Ga Sudbury impact crater [14] located in Ontario, Canada, is one of the three largest impact craters on Earth with good exposures of its impact melt sheet and overlying breccias [15,16]. The impact melt sheet, called the Sudbury Igneous Complex (SIC), is up to 5 km thick [17], with an estimated original volume of >10 4 km 3 [18], and differentiated. Recent work demonstrated evaporative loss and isotope fractionation of the moderately volatile element zinc and suggest melt sheets produced by impacts could have a significant effect on the Earth’s volatile inventory [19]. In this study we investigate the abundance and isotopic composition of Cl as well the water abundance of apatite from the SIC and the overlying crater-fill to test the hypothesis that large-scale impacts may have generated the extensive Cl isotopic fractionation observed on the Moon.

Sudbury↗

Manned space flight nuclear system safety. Volume 5: Nuclear System safety guidelines. Part 1: Space base nuclear safety

The design and operations guidelines and requirements developed in the study of space base nuclear system safety are presented. Guidelines and requirements are presented for the space base subsystems, nuclear hardware (reactor, isotope sources, dynamic generator equipment), experiments, interfacing vehicles, ground support systems, range safety and facilities. Cross indices and references are provided which relate guidelines to each other, and to substantiating data in other volumes. The guidelines are intended for the implementation of nuclear safety related design and operational considerations in future space programs.

Source record↗

Cosmic ray composition investigations using ICE/ISEE-3

The analysis of data from the high energy cosmic experiment on ISEE-3 and associated modeling and interpretation activities are discussed. The ISEE-3 payload included two instruments capable of measuring the composition of heavy cosmic rays. The designs of these two instruments incorporated innovations which made it possible, for the first time, to measure isotopic as well as the chemical composition for a wide range of elements. As the result of the demonstrations by these two instruments of the capability to resolve individual cosmic ray isotopes, a new generation of detectors was developed using very similar designs, but having improved reliability and increased sensitive area. The composition measurements which were obtained from the ISEE-3 experiment are summarized.

Wiedenbeck, Mark E.↗

Low Power Radioisotope Conversion Technology and Performance Summary

This work presents a summary of low-power radioisotope-based power sources. This includes systems that use direct energy conversion from radioactive decay such as betavoltaics and systems that convert heat generated by the isotope decay. These types of power systems have terrestrial and space-based applications. Their main application is to provide low levels of power in remote environments where long life and reliability are the main objectives. This work looked at the potential performance of these types of systems and the range of output power they can achieve. Also considered was the amount of power that could be achieved from these different conversion technologies, while remaining under the critical limit acceptable for space flight without the need for special handling and controls. This is of interest for space missions where low power levels can be used for operating sensors or other devices, but the expense associated with the incorporation of radioactive material above this critical level would be cost prohibitive.

Colozza, Anthony J.↗

Sulphur isotopic compositions of deep-sea hydrothermal vent animals

The S-34/S-32 ratios of tissues from vestimentiferan worms, brachyuran crabs, and giant clams living around deep hydrothermal vents are reported. Clean tissues were dried, ground, suspended in 0.1 M LiCl, shaken twice at 37 C to remove seawater sulfates, dried at 60 C, combusted in O2 in a Parr bomb. Sulfur was recovered as BaSO4, and the isotopic abundances in SO2 generated by thermal decomposition of 5-30-mg samples were determined using an isotope-ratio mass spectrometer. The results are expressed as delta S-34 and compared with values measured in seawater sulfates and in normal marine fauna. The values ranged from -4.7 to 4.7 per thousand, comparable to vent sulfide minerals (1.3-4.1 per thousand) and distinct from seawater sulfates (20.1 per thousand) and normal marine fauna (about 13-20 per thousand). These results indicate that vent sulfur rather than seawater sulfur is utilized by these animals, a process probably mediated by chemoautotrophic bacteria which can use inorganic sulfur compounds as energy sources.

Fry, B.↗

The Origin of Noble Gas Isotopic Heterogeneity in Icelandic Basalts

Two models for generation of heterogeneous He, Ne and Ar isotopic ratios in Icelandic basalts are evaluated using a mixing model and the observed noble gas elemental ratios in Icelandic basalts,Ocean island Basalt (OIBs) and Mid-Ocean Ridge Basalt (MORBs). Additional information is contained in the original extended abstract.

Dixon, E. T.↗

Trace Gas Measurements on Mars and Earth Using Optical Parametric Generation

Trace gases and their isotopic ratios in planetary atmospheres offer important but subtle clues as to the origins of a planet's atmosphere, hydrology, geology, and potential for biology. An orbiting laser remote sensing instrument is capable of measuring trace gases on a global scale with unprecedented accuracy, and higher spatial resolution that can be obtained by passive instruments. We have developed an active sensing instrument for the remote measurement of trace gases in planetary atmospheres (including Earth). The technique uses widely tunable, seeded optical parametric generation (OPG) to measure methane, CO2, water vapor, and other trace gases in the near and mid-infrared spectral regions. Methane is a strong greenhouse gas on Earth and it is also a potential biogenic marker on Mars and other planets. Methane in the Earth's atmosphere survives for a shorter time than CO2 but its impact on climate change can be larger than CO2. Methane levels have remained relatively constant over the last decade around 1.78 parts per million (ppm) but recent observations indicate that methane levels may be on the rise. Increasing methane concentrations may trigger a positive feedback loop and a subsequent runaway greenhouse effect, where increasing temperatures result in increasing methane levels. The NRC Decadal Survey recognized the importance of global observations of greenhouse gases and called for simultaneous CH4, CO, and CO2 measurements but also underlined the technological limitations for these observations. For Mars, methane measurements are of great interest because of its potential as a strong biogenic marker. A remote sensing instrument that can measure day and night over all seasons and latitudes can identify and localize sources of biogenic gas plumes produced by subsurface chemistry or biology, and aid in the search for extra-terrestrial life. It can identify the dynamics of methane generation over time and latitude and identify future lander mission sites for more detailed in-situ analysis. In this paper we report on remote sensing measurements of methane using a high peak power, widely tunable optical parametric generator (OPG) operating at 3.3 micron and 1.65 micron. The OPG is pumped by a passively q-switched single frequency laser (3ns, 5KHz, 50uJ) and seeded by a diode laser. The spectral width of both signal and idler of seeded OPG is nearly Fourier transform limited. The output of seeded OPG is single frequency with high spectral purity and is widely tunable. Both 1650 nm and 3300 nm can be generated with a conversion efficiency of more than 30%. We have demonstrated detection of methane at 3274 nm and 1650 nm in a cell and also performed open path atmospheric measurements of methane at the same wavelengths. Finally, we were able to demonstrate simultaneous detection of methane at 3270.4 nm and CO2 at 1578.2 nm. In this paper we will discuss the OPG performance and atmospheric open path measurement results.

Numata, Kenji↗

Radioactive waste disposal via electric propulsion

It is shown that space transportation is a feasible method of removal of radioactive wastes from the biosphere. The high decay heat of the isotopes powers a thermionic generator which provides electrical power for ion thrust engines. The massive shields (used to protect ground and flight personnel) are removed in orbit for subsequent reuse; the metallic fuel provides a shield for the avionics that guides the orbital stage to solar system escape. Performance calculations indicate that 4000 kg. of actinides may be removed per Shuttle flight. Subsidiary problems - such as cooling during ascent - are discussed.

Burns, R. E.↗

Compositional studies of the lunar regolith at the Apollo 17 site

Major-, minor-, and trace-element abundance data are presented for twenty-two Apollo 17 samples, twelve Apollo 16 samples, and one Apollo 15 basalt. The data were obtained by INAA employing a 14 MeV neutron generator, a Cf-252 isotopic neutron source and nuclear reactor thermal neutrons. Abundance summations for the twenty-four samples analyzed for major and minor abundance elements averaged 98.8 plus or minus 0.3%. Similarities between the Apollo 17 and the Apollo 11 mare basalts are discussed. Abundances in 13 Apollo 17 soils exhibit the greatest compositional range we have observed for soils from a specific landing site. A strong inverse Fe-Al correlation in all lunar materials we have analyzed with the exception of most Apollo 16 samples is defined by the equation: %Fe = -1.36 %Al + 21.5. A strong direct Mn-Fe correlation is defined by the equation: %Fe = 75.9 %Mn + 0.08. Both regression lines appear to have the mare basalts, as one end-member and an unspecified Al-rich component at the other end. Comparisons of the data from direct O determinations and calculated O abundances based on normal stoichiometry are presented.

Miller, M. D.↗

Effects of proton irradiation on a gas phase in which condensation takes place. I Negative Mg-26 anomalies and Al-26

In the present paper, isotopic effects in magnesium generated in a proton-irradiated gas phase are examined, taking only (p,n), (p,d), and (p, alpha) reactions in magnesium, aluminum, and silicon into consideration. In the presence of proton radiation, the three elements are 'removed' from the gas phase by condensation. It is required that a value of Al-26/Al-27 greater than 6 times 10 to the -5th must be reached, consistent with the value deduced by Lee Papanastassiou, and Wasserburg (1976) from their studies of the Allende meteorite. The calculations show that fast aluminum condensation reduces the required proton fluence substantially, that a significant fraction of aluminum remains uncondensed when the above value of the Al-26/Al-27 ratio is reached, that a detectable MG-24 excess is very likely to occur, that detectable negative MG-28 anomalies can be generated, and that proton fluxes and irradiation times can be varied simultaneously, and over a wide range of values, without significant changes in the required proton fluence.

Heymann, D.↗

Distinct Chlorine Isotopic Reservoirs on Mars: Implications for Character, Extent and Relative Timing of Crustal Interaction with Mantle-Derived Magmas, Evolution of the Martian Atmosphere, and the Building Blocks of an Early Mars

The style, magnitude, timing, and mixing components involved in the interaction between mantle derived Martian magmas and Martian crust have long been a point of debate. Understanding this process is fundamental to deciphering the composition of the Martian crust and its interaction with the atmosphere, the compositional diversity and oxygen fugacity variations in the Martian mantle, the bulk composition of Mars and the materials from which it accreted, and the noble gas composition of Mars and the Sun. Recent studies of the chlorine isotopic composition of Martian meteorites imply that although the variation in delta (sup 37) Cl is limited (total range of approximately14 per mille), there appears to be distinct signatures for the Martian crust and mantle. However, there are potential issues with this interpretation. New Cl isotope data from the SAM (Sample Analysis at Mars) instrument on the Mars Science Lab indicate a very wide range of Cl isotopic compositions on the Martian surface. Recent measurements by [10] duplicated the results of [7,8], but placed them within the context of SAM surface data. In addition, Martian meteorite Chassigny contains trapped noble gases with isotopic ratios similar to solar abundance, and has long been considered a pristine, mantle derived sample. However, previous studies of apatite in Chassigny indicate that crustal fluids have interacted with regions interstitial to the cumulus olivine. The initial Cl isotope measurements of apatite in Chassigny suggest an addition of crustal component to this lithology, apparently contradicting the rare gas data. Here, we examine the Cl isotopic composition of multiple generations and textures of apatite in Chassigny to extricate the crustal and mantle components in this meteorite and to reveal the style and timing of the addition of crustal components to mantle-derived magmas. These data reveal distinct Martian Cl sources whose signatures have their origins linked to both the early Solar System and the evolving Martian atmosphere.

Shearer, C. K.↗

Oxygen and carbon stable isotope composition of the weathering Mg-carbonates on the surface of the LEW 85320 ordinary chondrite: Revisited

New δ13C and δ18O values were measured to constrain the formation mechanisms of two previously identified generations (Antarctica and Houston) of terrestrial weathering carbonates, nesquehonite, which formed on the surface of the Lewis Cliff 85320 ordinary chondrite. These two nesquehonite generations exhibit a characteristic carbon and oxygen isotopic trend which starts with a linear δ13C-δ18O covariation followed by a continuous increase in δ18O with little to no change in δ13C. Based upon the newly developed nesquehonite-water oxygen isotope thermometry and the measured δ18O value of melted ice from Antarctica, the formation temperature of the Antarctic nesquehonite generation was estimated to be -1.9 ± 3℃. Houston nesquehonite generation was most likely formed from an evaporative residue of the melted Antarctic ice at 30 ± 4℃. Modeling the isotopic trend of the two generations suggests that evaporation created large δ18O variations in the nesquehonite while carbon isotopes were stabilized by exchange between the parent liquid and atmospheric CO2. Thus, we suggest that carbonates formed by terrestrial weathering in Antarctica should possess a widespread in δ18O values and a narrow range in δ13C values under dry and cold conditions. Finally, the observed wide spread of δ18O in Martian carbonates (e.g., Allan Hills 84001 and Nakhla) can be explained by evaporation near 0℃ and may have formed by a similar mechanism to that of the nesquehonite in the LEW 85320. Meanwhile, the wide spread of δ13C suggests that two carbon reservoirs with distinct isotope compositions on Mars (e.g., the atmospheric carbon and magmatic carbon) may be actively participating in the formation process.

weathering↗

SNC Meteorites and Martian Reservoirs

Jones first suggested that the inverse covariation of initial epsilon (Nd-143) and Sr-87/Sr-86 of the shergottites could be explained by interaction between mantle-derived magmas with another isotopic reservoir(s) (i.e., assimilation or contamination). In that model, magmas were generated in a source region that was isotopically similar to the Nakhla source and the second reservoir(s) was presumed to be crust. The text also permitted the second reservoir to be another type of mantle, but I can confirm that a second mantle reservoir was never seriously considered by that author. Other features of this model were that (i) it occurred at a particular time, 180 m.y. ago, and (ii) the interacting reservoirs had been separated at approximately 4.5 b.y. In a later paper Jones explored this mixing model more quantitatively and concluded that magmas from a Nakhla-like source region at 180 m.y. would fall on or near an isotopic Nd-Sr-Pb hyperplane defined by the shergottites. This criterion was a necessary prerequisite for the parent magma(s) of the shergottites to have initially been Nakhla-like isotopically. At this juncture, it is perhaps worthwhile to note that this mixing model was not presented to explain geochemical variations but as a justification for a 180 m.y. crystallization age for the shergottites and a 1.3 b.y. crystallization age for the nakhlites. In the mid-1980's crystallization ages estimated for Nakhla ranged from approximately 1.3 b.y to 4.5 b.y. Similarly, preferred crystallization ages for the shergottites ranged from 360 m.y., to 1.3 b.y., to 4.5 b.y. In all these models, the 180 m.y. event seen in the shergottites was deemed to be metamorphic. The fit between the Nakhla-like source region and the shergottite hyperplane was a validation both of the 1.3 b.y. igneous age of Nakhla and the 180 m.y. igneous age of the shergottites.

Jones, J. H.↗