Determination of sea surface conditions using Skylab L-band and Radscat passive microwave radiometers
There are no author-identified significant results in this report.
Hollinger, J. P.↗
SEARCH · Search NASA
Results for “L-band radiometer”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Determination of sea surface conditions using Skylab L-band and Radscat passive microwave radiometers
There are no author-identified significant results in this report.
Hollinger, J. P.↗
Transfer-matrices for series-type microwave antenna circuits
Transfer matrices are developed which permit analysis and computer evaluation of certain series type microwave antenna circuits associated with an L-Band microwave radiometer (LBMR) under investigation at Goddard Space Flight Center. This radiometer is one of several diverse instrument designs to be used for the determination of soil moisture, sea state, salinity, and temperature data. Four port matrix notation is used throughout for the evaluation of LBMR circuits with mismatched couplers and lossy transmission lines. Matrix parameters in examples are predicted on an impedance analysis and an assumption of an array aperture distribution. The notation presented is easily adapted to longer and more varied chains of matrices, and to matrices of larger dimension.
Schmidt, R. F.↗
Remote sensing of the Chesapeake Bay plume salinity via microwave radiometry
The NASA-Langley-developed L-Band microwave radiometer was used to remotely measure sea surface salinity during the Chesapeake Bay plume studies. Obtained measurements of microwave brightness temperatures of the sea surface were combined with measurements of sea surface temperature obtained with an infrared radiometer and inverted to produce corresponding values of sea surface salinity. Results from the plume measurements, which indicate the southward extent of the plume along the Virginia-North Carolina coast, are presented and discussed. Additional measurements obtained for the Delaware Bay Mouth flight, and the James River-Shelf flight, are also discussed.
Kendall, B. M.↗
Correlation of microwave sensor returns with soil moisture
Microwave sensor soil data were collected by aircraft over agricultural croplands. Multiple incident angle scatterometer data (13.3, 4.75, 1.6 and 0.4 GHz), passive radiometer data (L and C-band), and soil moisture ground truth measurements were collected coincidentally. Each sensor and angle of incidence was linearly analyzed against the measured soil moisture. For bare agricultural soils, the optimal single sensor for soil moisture preduction is the L-band passive radiometer. The effects of vegetation and differing surface roughness prove significant. When both bare and vegetated surfaces were studied, the masking due to the vegetation renders the single sensor approach ineffective in soil moisture prediction. Multisensor techniques are necessary to remotely measure soil moisture when a priori knowledge of vegetation is not available.
Taube, D. W.↗
Utilization of vegetation indices to improve microwave soil moisture estimates over agricultural lands
A technique is presented by means of which visible/near-IR data are used to develop corrections in remotely sensed microwave soil moisture signals, in order to account for vegetation effects. Visible/IR data collected with the NASA NS001 Thematic Mapper Simulator were used to calculate the Perpendicular Vegetation Index (PVI), which was then related to the change of sensitivity of the microwave measurement to surface soil moisture. Effective estimation of soil moisture in the presence of vegetation can be made with L-band microwave radiometers and visible/IR sensors when the PVI is lower than 4.3. This technique offers a means for the estimation of moisture from a space platform over many agricultural areas, without expensive ground data collection.
Theis, S. W.↗
A high resolution soil moisture radiometer
The design of an L-band high resolution soil moisture radiometer is described. The selected system is a planar slotted waveguide array at L-band frequencies. The square aperture is 74.75 m by 74.75 m subdivided into 8 tilted subarrays. The system has a 290 km circular orbit and provides a spatial resolution of 1 km. The aperture forms 230 simultaneous beams in a cross-track pattern which covers a swath 420 km wide. A revisit time of 6 days is provided for an orbit inclination of 50 deg. The 1 km resolution cell allows an integration time of 1/7 second and sharing this time period sequentially between two orthogonal polarization modes can provide a temperature resolution of 0.7 K.
Dod, L. R.↗
The Seasat-A project - An overview
Scheduled for launch in the second quarter of calendar year 1978, the Seasat-A satellite is designed to provide all-weather global monitoring of sea surface temperature, significant wave height, surface wind speed and direction and departures from the marine geoid corresponding to ocean dynamic processes. These data will be obtained from an array of microwave instruments, two active ones (short pulse radar altimeter and wind field scatterometer) and one passive (scanning multichannel microwave radiometer). An experimental L-band synthetic aperture radar, operated on a selected basis for approximately four percent of the time, will provide land and ocean images with a resolution of 25 meters and a swath width close to 100 km for the study of coastal processes, sea ice and ocean wave characteristics. The mission objectives focus on an evaluation of the performance of the instruments in terms of their capabilities to characterize the desired geophysical quantities and the utility of such measurements to the study and exploitation of the world's oceans.
Dunne, J. A.↗
Seasat-A data acquisition and distribution
The instrument package of the Seasat-A satellite, scheduled for launch in 1978, consists of a short-pulse radar altimeter, a wind field scatterometer, a scanning multichannel microwave radiometer, and an experimental L-band synthetic aperture radar. Objectives of the mission include precision altimetry for marine geoid and sea surface topography assessments, the determination of wave directional spectra through radar scatterometry, and sea surface temperature measurements through microwave emission analysis. The synthetic aperture radar, operated selectively, is intended to yield land and sea imagery with a resolution of 25 m for such requirements as coastal surveys.
Dunne, J. A.↗
Use of the Space Shuttle for remote sensing research - Recent results and future prospects
The successful November 1981 test flight of the Space Shuttle Orbiter Columbia has demonstrated the Shuttle's utility and versatility for earth resources-related research. A series of remote sensing experiments is planned for the mid-1980s which will more fully exploit the Shuttle's earth observation capability. The OSTA-1 experiment package of the mission mentioned incorporated the Shuttle Imaging Radar, a synthetic aperture, side-looking device which artificially illuminated the earth's surface with horizontally polarized microwave radiation transmitted at L-band frequency, the Shuttle Multispectral IR Radiometer, which measured the intensity of solar radiation reflected from the earth's surface, the Measurement of Air Pollution from Satellites experiment, which determined the concentration of CO in the earth's atmosphere, the proof-of-concept Feature Identification and Location Experiment, and the Night/Day Optical Survey of Lightning experiment.
Settle, M.↗
Microwave integrated circuit radiometer front-ends for the Push Broom Microwave Radiometer
Microwave integrated circuit front-ends for the L-band, S-band and C-band stepped frequency null-balanced noise-injection Dicke-switched radiometer to be installed in the NASA Langley airborne prototype Push Broom Microwave Radiometer (PBMR) are described. These front-ends were developed for the fixed frequency of 1.413 GHz and the variable frequencies of 1.8-2.8 GHz and 3.8-5.8 GHz. Measurements of the noise temperature of these units were made at 55.8 C, and the results of these tests are given. While the overall performance was reasonable, improvements need to be made in circuit losses and noise temperatures, which in the case of the C-band were from 1000 to 1850 K instead of the 500 K specified. Further development of the prototypes is underway to improve performance and extend the frequency range.
Harrington, R. F.↗
EMI survey for maritime satellite 1535-1645-MHz shipboard terminal
A 15,690-ton commercial container ship was selected as lead ship for an onboard electromagnetic-interference (EMI) survey prior to installation of 1535-1645-MHz (L-Band) shipboard terminals for communication via a maritime satellite. In general, the EMI survey revealed tolerable interference levels on board ship. Radiometer measurements indicate antenna-noise temperatures less than 70 K at elevation angles of 5 deg and greater at 1559 MHz at the output terminals of the 1.2-m diameter parabolic-dish antenna for the L-band shipboard terminal. Other EMI measurements include field intensity from 3-cm and 10-cm wavelength pulse radars, and conducted-emission tests of primary power lines to both onboard radars.
Taylor, R. E.↗
EMI survey for maritime satellite, L-band, shipboard terminal
The United States Lines 15,690-ton commercial-container ship, American Alliance, was selected as lead ship for an onboard EMI survey prior to installation of L-Band shipboard terminals for operation with two, geostationary, maritime satellites. In general, the EMI survey revealed tolerable interference levels onboard ship: radiometer measurements indicate antenna-noise temperatures less than 70 K, at elevation angles of 5 deg and greater, at 1559 MHz, at the output terminals of the 1.2-m-diameter, parabolic-dish antenna for the L-Band shipboard terminal. Other EMI measurements include field intensity from 3 cm- and 10 cm-wavelength pulse radars, and conducted-emission tests of primary power lines to both onboard radars.
Taylor, R. E.↗
Microwave remote sensing of sea ice in the AIDJEX Main Experiment
A microwave remote sensing program of sea ice in the Beaufort Sea was conducted during the Arctic Ice Dynamics Joint Experiment (AIDJEX). Several types of both passive and active sensors were used to perform surface and aircraft measurements during all seasons of the year. In situ observations were made of physical properties (salinity, temperature, density, surface roughness), dielectric properties, and passive microwave measurements were made of first-year, multiyear, and first-year/multiyear mixtures. Airborne passive microwave measurements were performed with the electronically scanning microwave radiometer while airborne active microwave measurements were performed by synthetic aperture radar, X- and L-band radar, and a scatterometer.
Campbell, W. J.↗
Submarine fresh water outflow detection with a dual-frequency microwave and an infrared radiometer system
Since infrared measurements are only very slightly affected by whitecap and banking angle influences, the combined multifrequency radiometric signatures of the L-band, the S-band, and an infrared radiometer are used in identifying freshwater outflows (submerged and superficial). To separate the river and lagoon outflows from the submarine outflows, geographical maps with a scale of 1:100,000 are used. In all, 44 submarine freshwater springs are identified. This is seen as indicating that the submarine freshwater outflow locations are more numerous around the island than had earlier been estimated. Most of the submarine springs are located at the northwest and southeast portion of the Puerto Rican coastline; the success in detecting the submarine springs during both missions at the northwest portion of the island is 39%. Salinity and temperature distribution plots along the flight path in longitude and latitude coordinates reveal that runoff direction can be determined.
Blume, H.-J. C.↗
L-band, 1.2 m parabolic antenna-noise temperature measurement
Extensive antenna-noise temperature measurements at 1.6 GHz (L-band) were made using a 1.2 m (4 ft. diameter) parabolic dish antenna mounted on the flying bridge of a modern 15,690-ton, commercial-container ship. Both in-harbor and at-sea radiometer measurements were made that indicated a steady background, antenna-noise temperature value slightly less than 70 degrees Kelvin (K) at elevation angles of 5 percent, and greater, at 1.6 GHz. A comparison of theoretical and measured values indicate excellent agreement within about 5K for at-sea data. These measurements are helpful to RF equipment designers of maritime, L-band shipboard terminals for operation with the two, geostationary, maritime satellites, Marisat-A and -B.
Taylor, R. E.↗
Microwave radiometer measurements of soil moisture content
A unique set of radiometer measurements is presented, recorded during a 1000-h day and night monitoring of irrigated fields from fully saturated to completely dry. Radiometer measurements were recorded at 2.8-cm (X-band) and 21.4-cm (L-band) wavelengths for a range of incident angles from nadir to 50 deg. Soil moisture and soil temperature profile measurements were recorded to a depth of 15 cm. The test site was located in east-central Texas on a clay soil (Miller clay). Three bare-surface plots were used, each having a distinctly different surface roughness. Vegetated plots were also measured. The data quantify the sensitivity of microwave radiometer measurements to soil moisture variations, the effect of surface roughness on the measurement, and the influence of surface vegetation.
Newton, R. W.↗
Measurements of the dielectric properties of sea water at 1.43 GHz
Salinity and temperature of water surfaces of estuaries and bay regions are determined to accuracies of 1 ppt salinity and 0.3 kelvin surface temperature. L-band and S-band radiometers are used in combination as brightness temperature detectors. The determination of the brightness temperature versus salinity, with the water surface temperature as a parameter for 1.4 GHz, is performed with a capillary tube inserted into a resonance cavity. Detailed analysis of the results indicates that the measured values are accurate to better than 0.2 percent in the electric property epsilon' and 0.4 percent in epsilon''. The calculated brightness temperature as a function of temperature and salinity is better than 0.2 kelvin. Thus it is possible to reduce the measured data obtained with the two-frequency radiometer system with 1 ppt accuracy to values in the salinity range 5 to 40 ppt.
Ho, W. W.↗