Search NASA⌕ Search

SEARCH · Search NASA

Results for “LED phosphors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Li doping effect on the photoluminescence behaviors of KSrPO{sub 4}:Dy{sup 3+} phosphors for WLED light

Highlights: • The luminescence intensity of KSrPO{sub 4}:Dy{sup 3+} can be increased with Li{sup +} ions co-doping. • The mechanisms for the emitting enhancement with Li{sup +} ions co-doping were investigated. • The thermal stability demonstrated that KSrPO{sub 4}:0.01Dy{sup 3+}, 0.06Li{sup +} is suitable for WLEDs. • The chromaticity coordinates of KSrPO{sub 4}:Dy{sup 3+}, Li{sup +} can be tuned with Li{sup +} ions increasing. - Abstract: A novel warm-white phosphor KSrPO{sub 4} co-doped with Dy{sup 3+} and Li{sup +} ions was prepared by solid state reaction. A strategy of Li{sup +} doping was used with the aim of enhancing the luminescence of 475 nm and 570 nm emission bands under NUV excitation. Compared to lithium-free KSrPO{sub 4}:Dy{sup 3+}, the intensities of the 570 nm emission peaks were increased by 4.32 times and 2.84 times excited by 351 nm and 388 nm with 6 mol% Li{sup +} ions co-doping, respectively. The mechanism of the enhancement was discussed, that is due to the improvement of the phosphors’ crystallinity and charge compensation when the Li{sup +} ions were introduced. Furthermore, the thermal stability of KSrPO{sub 4}:0.01Dy{sup 3+}, 0.06Li{sup +} was measured and discussed, demonstrating it can be applied for high-powered LED. And the chromaticity coordinates of KSrPO{sub 4}:0.01Dy{sup 3+}, xLi{sup +} can be tuned efficiently from the cold-white region to warm-white region with Li{sup +} ions increasing, presenting its potential applied value as a new warm-white LED phosphor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Efficiency Integrated Package

Solid-state lighting based on LEDs has emerged as a superior alternative to inefficient conventional lighting, particularly incandescent. LED lighting can lead to 80 percent energy savings; can last 50,000 hours – 2-50 times longer than most bulbs; and contains no toxic lead or mercury. However, to enable mass adoption, particularly at the consumer level, the cost of LED luminaires must be reduced by an order of magnitude while achieving superior efficiency, light quality and lifetime. To become viable, energy-efficient replacement solutions must deliver system efficacies of ≥ 100 lumens per watt (LPW) with excellent color rendering (CRI > 85) at a cost that enables payback cycles of two years or less for commercial applications. This development will enable significant site energy savings as it targets commercial and retail lighting applications that are most sensitive to the lifetime operating costs with their extended operating hours per day. If costs are reduced substantially, dramatic energy savings can be realized by replacing incandescent lighting in the residential market as well. In light of these challenges, Cree proposed to develop a multi-chip integrated LED package with an output of > 1000 lumens of warm white light operating at an efficacy of at least 128 LPW with a CRI > 85. This product will serve as the light engine for replacement lamps and luminaires. At the end of the proposed program, this integrated package was to be used in a proof-of-concept lamp prototype to demonstrate the component’s viability in a common form factor. During this project Cree SBTC developed an efficient, compact warm-white LED package with an integrated remote color down-converter. Via a combination of intensive optical, electrical, and thermal optimization, a package design was obtained that met nearly all project goals. This package emitted 1295 lm under instant-on, room-temperature testing conditions, with an efficacy of 128.4 lm/W at a color temperature of ~2873K and 83 CRI. As such, the package’s performance exceeds DOE’s warm-white phosphor LED efficacy target for 2013. At the end of the program, we assembled an A19 sized demonstration bulb housing the integrated package which met Energy Star intensity variation requirements. With further development to reduce overall component cost, we anticipate that an integrated remote converter package such as developed during this program will find application in compact, high-efficacy LED-based lamps, particularly those requiring omnidirectional emission.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Stable Perovskite Core-Shell Nanocrystals as Down-Converting Phosphors for Solid State Lighting

Colloidal perovskite quantum dots (QDs) or nanocrystals (NCs) with structure of CsPbX 3 (X = Cl, Br, I) are promising materials as down-converting phosphors due to their high quantum yield up to >90%, extremely narrow emission band ~15-30 nm, and tunable emission wavelengths of ~410-700 nm via size or composition control. Compared to other QD materials, the optical and electronic properties of perovskite NCs are much more tolerant to defects so highly efficient light-emitting NCs can be easily prepared without carefully removing surface defects. Also, precision size control is not required for obtaining perovskite NCs with narrow emission <30 nm and can greatly enhance the reproducibility and yield rate during mass production. The challenges in using perovskite NCs as LED phosphors are their hygroscopic nature and self-absorption as observed from other QDs. We propose to synthesize core-shell structure perovskite NCs to improve their stability by over-coating a SiO 2 layer, followed by further sol-gel processing into stable micro-sized glass beads. To increase Stokes shift and avoid self-absorption, core/graded-shell/shell structure such as CsSnBr 3 /CsSn 1-x Pb x Br 3 /CsPbBr 3 NCs will be prepared, similar to a concept we demonstrated before in CdSe/Cd 1-x ZnxSe 1-y S y /ZnS structure with significantly separated absorption and emission bands. These NC materials will be integrated into films and used as remote or on-chip downconverters for high efficiency, high CRI and warm white LED. To achieve this goal, PhosphorTech Corporation (PTC) has teamed with Georgia Tech (GT) to develop this unique perovskite system for pcLEDs that offers the promise of high luminous efficacy over a broad temperature and optical flux range.

36 MATERIALS SCIENCE↗

Thermostability and photostability of Sr{sub 3}SiO{sub 5}:Eu{sup 2+} phosphors for white LED applications

Sr{sub 3}SiO{sub 5}:Eu{sup 2+} phosphors were synthesized by solid-state reactions, and their photoluminescence (PL) stability under the impact of heat or light was studied. The thermal degradation in air was observed for the Sr{sub 3}SiO{sub 5}:Eu{sup 2+} phosphor, furthermore, this drop in emission intensity could be accelerated by simultaneously illuminating the phosphor with a high-power blue LED during the heating process. This enhanced thermal degradation phenomenon in the blue light can be ascribed to the photo-assisted thermal oxidation of Eu{sup 2+} ions. A reversible decrease in emission intensity at room temperature was observed on illuminating the Sr{sub 3}SiO{sub 5}:Eu{sup 2+} phosphor alone by the blue light, which could be related to trapping centers in the phosphor. The existence of traps is also responsible for the anomalous increase of emission intensity with increasing temperature from 30 to 100 °C. Considering the influences of Ba{sup 2+} doping on temperature-dependent PL properties of the Sr{sub 3}SiO{sub 5}:Eu{sup 2+} phosphor, the thermal quenching origin may be ascribed to the thermally assisted photoionization process. - Graphical abstract: The photo-induced reversible decrease in emission intensity and the anomalous emission enhancement with increasing temperature are related to trapping centers in the phosphor. - Highlights: • The photo-assisted thermal degradation was observed for the Sr{sub 3}SiO{sub 5}:Eu{sup 2+} phosphor. • The phosphor showed a reversible intensity decrease under the blue light irradiation. • An anomalous emission enhancement with increasing temperature was found. • Ba{sup 2+} substitution could suppress the thermal quenching of Sr{sub 3}SiO{sub 5}:Eu{sup 2+}. • Mechanisms for photostability and thermostability were discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and photoluminescence study of Dy{sup 3+} doped Sr{sub 3}B{sub 2}O{sub 6}: Nanophosphors

In present paper, the combustion method synthesis of Dy{sup 3+} doped Sr{sub 3}B{sub 2}O{sub 6} nanophosphor and their luminescent properties have been reported. The crystalline structure and morphology of nanophosphors was confirmed and verify by the Xray powder diffraction (XRD) and transmission electron microscopy (TEM). The spectral properties of the Sr{sub 3}B{sub 2}O{sub 6}:Dy{sup 3+} nanophosphors have been studied with the photoluminescence (PL) spectroscopy. Under 300nm excitation, the PL emission shows three peaks at 482, 575 and 664 nm, corresponding to the {sup 4}F{sub 9/2}→{sup 6}H{sub 15/2}, {sup 4}F{sub 9/2}→{sup 6}H{sub 13/2} and {sup 4}F{sub 9/2}→{sup 4}H{sub 11/2} transition states. The 1931 CIE diagram gives the coordinates (x, y) as (0.38099, 0.40418) correspond to the shade of yellowish white emission of the Dy{sup 3+} ion which can be used as w-LED phosphors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal complexes and methods of making the same

Disclosed herein are embodiments of metal complexes and methods of making the same. The disclosed method embodiments provide a one-step approach to making metal complexes, such as complexes comprising lanthanide metals, rare earth metals, transition metals, main group metals, and/or actinide metals that can be used various applications, such as in separations technology, catalysis (e.g., catalysts for pharmaceutical synthesis and/or catalysts for biomass conversion), nuclear chemistry, LED phosphors, scintillator materials, magnetic materials, and nuclear fuels.

Kiplinger, Jaqueline↗

LED lamp incorporating remote phosphor with heat dissipation features

An LED lamp or bulb is disclosed that comprises a light source, a heat sink structure and a remote planar phosphor carrier having at least one conversion material. The phosphor carrier can be remote to the light sources and mounted to the heat sink so that heat from the phosphor carrier spreads into the heat sink. The phosphor carrier can comprise a thermally conductive transparent material and a phosphor layer, with an LED based light source mounted to the heat sink such that light from the light source passes through the phosphor carrier. At least some of the LED light is converted by the phosphor carrier, with some lamp embodiments emitting a white light combination of LED and phosphor light. The phosphor arranged according to the present invention can operate at lower temperature to thereby operate at greater phosphor conversion efficiency and with reduced heat related damage to the phosphor.

36 MATERIALS SCIENCE↗

Optical studies in Er{sup 3+} doped BaMoO{sub 4} downconverting phosphor for blue LEDs

Erbium ion (Er{sup 3+}) doped BaMoO{sub 4} phosphor has been synthesized via co-precipitation technique. Phase formation of the prepared phosphor has been recognized by powder X-ray diffraction analysis. The photoluminescence emission spectrum has been recorded in 400-800nm wavelength range under 380nm excitation. The observed photoluminescence peaks are explained with the help of energy level structure. The prepared phosphor seems capable to produce efficient blue colour emission which can be useful for making blue light emitting diodes (LEDs).

36 MATERIALS SCIENCE↗

Photoluminescence studies of high-efficient red-emitting K{sub 2}Y(WO{sub 4})(PO{sub 4}):Eu{sup 3+} phosphor for NUV LED

Highlights: • Novel K{sub 2}Y(WO{sub 4})(PO{sub 4}):Eu{sup 3+} red phosphors were prepared by solid-state method. • Phosphors exhibit strong red light under NUV excitation with quantum efficiency of 70.5 %. • Judd–Ofelt analysis ascertains the presence of Eu{sup 3+} in a highly asymmetric environment. • The red LED prototype was fabricated with KYWP:Eu{sup 3+} phosphor and InGaN chip. - Abstract: A series of high-efficient red-emitting phosphors K{sub 2}Y(WO{sub 4})(PO{sub 4}):Eu{sup 3+} have been successfully synthesized by conventional solid-state reaction, and its photoluminescence (PL) properties have been investigated. The phosphors can be excited efficiently by NUV light, then exhibit strong red emission with quantum efficiency of 70.5%. The concentration quenching takes place at relatively high concentration of Eu{sup 3+} (x = 0.70), which is further confirmed by the variation of decay curves of the entitled phosphors. Judd–Ofelt analysis ascertains the presence of Eu{sup 3+} in a highly asymmetric environment. The phosphor exhibits good thermal stability (92.5% at 100 °C and 84.1% at 180 °C). The red LED prototype fabricated by opyimized-composition K{sub 2}Y(WO{sub 4})(PO{sub 4}):0.70Eu{sup 3+} phosphor and 395 nm-emitting InGaN chips exhibit bright red emission. The results indicate that the K{sub 2}Y(WO{sub 4})(PO{sub 4}):Eu{sup 3+} phosphors are promising red phosphors for NUV LED.

36 MATERIALS SCIENCE↗

Synthesis and photoluminescence properties of NaLaMgWO{sub 6}:RE{sup 3+} (RE = Eu, Sm, Tb) phosphor for white LED application

Highlights: ► NaLa{sub 1−x}MgWO{sub 6}:xRE{sup 3+} phosphors were synthesized by solid-state reaction method. ► Compared with Y{sub 2}O{sub 3}:Eu{sup 3+}, NaLaMgWO{sub 6}:Eu{sup 3+} performed better luminescence properties. ► The results demonstrated NaLaMgWO{sub 6} as a suitable host for RE{sup 3+}-doping. -- Abstract: Single phase of NaLa{sub 1−x}MgWO{sub 6}:xRE{sup 3+} (0 < x ≤1) (RE = Eu, Sm, Tb) phosphors were prepared by solid-state reaction method. X-ray diffraction, scanning electron microscopy, the morphology energy-dispersive X-ray spectroscopy, UV–vis diffuse reflectance spectra and photoluminescence were used to characterize the samples. Under the light excitation, NaLaMgWO{sub 6}:Eu{sup 3+}, NaLaMgWO{sub 6}:Sm{sup 3+} and NaLaMgWO{sub 6}:Tb{sup 3+}, phosphors showed the characteristic emissions of Eu{sup 3+} ({sup 5}D{sub 0} → {sup 7}F{sub 4,3,2,1}), Sm{sup 3+} ({sup 4}G{sub 5/2} → {sup 6}H{sub 5/2,7/2,9/2}), and Tb{sup 3+} ({sup 5}D{sub 4} → {sup 7}F{sub 6,5,4,3}), respectively. The intensity of the red emission for Na(La{sub 0.6}Eu{sub 0.4})MgWO{sub 6} is 2.5 times higher than that of (Y{sub 0.95}Eu{sub 0.05}){sub 2}O{sub 3} under blue light irradiation. The quantum efficiencies of the entitled phosphors excited under 394 nm and 464 nm are also investigated and compared with commercial phosphors Y{sub 2}O{sub 3}:Eu{sup 3+}, Sr{sub 2}Si{sub 5}N{sub 8}:Eu{sup 2+} and Y{sub 3}A{sub 5}G{sub 12}:Ce{sup 3+}. The results demonstrated NaLaMgWO{sub 6}:RE{sup 3+} phosphors as potential candidates for white light emitting diode pumped by UV or blue chip.

36 MATERIALS SCIENCE↗

Energy transfer and tunable luminescence of Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} phosphors for white LED applications

Highlights: • Iso-structural garnet-type Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} solid solution were synthesized. • Efficient energy transfer from [VO{sub 4}]{sup 3−} to Eu{sup 3+} ions in this phosphor is observed obviously. • Tuning the Y/Eu ratio generates the varied hues from yellowish-green to reddish-orange. • This kind of phosphor can be potentially used in UV pumped LEDs. - Abstract: A series of solid-solution phosphors Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} were prepared using solution combustion reaction. X-ray diffraction studies verified the formation of single phase Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} with garnet structure. Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} phosphors show not only a broad emission band with a maximum at 510 nm due to the [VO{sub 4}]{sup 3−} group but also several sharp emission lines due to the Eu{sup 3+} ions. The energy transfer from [VO{sub 4}]{sup 3−} to Eu{sup 3+} was discussed on the base of the spectral analysis. The color-tunable emissions of the Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} phosphor as a function of Y/Eu ratio are realized by continuously generating the varied hues from yellowish-green to reddish-orange. This indicates that the obtained phosphor may have potential applications in the field of UV-based white LEDs.

36 MATERIALS SCIENCE↗

Novel Transparent Phosphor Conversion Matrix with High Thermal Conductivity for Next Generation Phosphor-Converted LED-based Solid State Lighting

The low thermal conductivity of state-of-the-art polymer encapsulants (k ~ 0.15 Wm-1K-1) limits the efficiency and power density of current phosphor conversion light emitting diodes (pc-LEDs). The technical objective of this project was to demonstrate synthesis and processing schemes for the fabrication of polymer hybrid encapsulants with a thermal conductivity exceeding k = 0.4 Wm-1K-1 for LED applications. The ‘hybrid polymer’ approach encompasses the dispersion of high thermal conductivity particle fillers (zinc oxide, ZnO as well as the alpha-polymorph of alumina, Al2O3) within a polysiloxane matrix (poly(dimethylsiloxane), PDMS as well as poly(phenyl methyl siloxane), PPMS) to increase the thermal conductivity while maintaining optical transparency and photothermal stability at levels consistent with LED applications. To accomplish this goal, a novel synthesis method for the fabrication of nanosized ZnO particles was developed and a novel surface chemistry was established to modify the surface of zinc oxide particle fillers and thus to enable their dispersion in poly(dimethyl siloxane) (PDMS) matrix polymers. Molecular dynamics and Mie simulations were used to optimize ligand structure and to enable the concurrent mixing of particles in PDMS/PPMS embedding media while also minimizing the thermal boundary resistance as well as optical scattering of particle fillers. Using this approach the synthesis of PDMS/ZnO hybrid encapsulants exhibiting a thermal conductivity of 0.64 Wm-1K-1 and optical transparency > 0.7 mm-1 was demonstrated. A forming process based on micromolding was developed to demonstrate the forming of particle filled PDMS into film and lens shapes. Photothermal stability testing revealed stability of the materials for approximately 4000 min when exposed to blue light LED (450 nm, 30 W/cm2). One postgraduate and seven graduate students were supported by the project. The research performed within this project led to fifteen publications in peer-reviewed journals and one patent application. The grant stimulated a multi-investigator research collaborations among seven investigators at Carnegie Mellon University to address the challenge of encapsulants in pc-LED applications. The grant also catalyzed the future collaboration between researchers at Carnegie Mellon University and OSRAM Sylvania to address challenges associated with the use if polymers in LED applications.

36 MATERIALS SCIENCE↗

A Mg2+-Ge4+ substituting strategy for optimizing color rendering index and luminescence of YAG: Ce3+ phosphors for white LEDs

Highlights: • Mg{sup 2+}-Ge{sup 4+} ion pairs can partially substitute the Al{sup 3+} ions of YAG successfully. With the substitution, the garnet crystal structure remains unchanged. • With increasing Mg{sup 2+}-Ge{sup 4+} ions concentrations, the emission spectra show a progressive red-shift, from 528 to 552 nm (about 24 nm). • In white LEDs, with increasing Mg{sup 2+}-Ge{sup 4+} ions concentrations, the CCT decreased gradually from 6798 to 3261 K and the CRI increased from 76.5 to 89.3. - Abstract: Mg{sup 2+}-Ge{sup 4+} ions substituted YAG: Ce{sup 3+} phosphors (Y{sub 3}Al{sub 5-2x}Mg{sub x}Ge{sub x}O{sub 12}: Ce{sup 3+}) were prepared by high temperature solid state reaction method. X-ray diffraction (XRD), Scanning election microscope (SEM), Photoluminescence (PL) spectra and so on were used to characterize the samples. The effects of Mg{sup 2+}-Ge{sup 4+} concentrations on the morphology, structure, luminescence properties, fluorescence lifetime and white LED performance of YAG: Ce{sup 3+} phosphors were studied in detail. The results indicate that Mg{sup 2+}-Ge{sup 4+} ion pairs can partially substitute the Al{sup 3+} ions of YAG successfully. With the substitution, the garnet crystal structure remains unchanged. However the emission spectra show a progressive red-shift, from 528 to 552 nm (about 24 nm). The lifetime decreased rapidly from 84 to 26 ns. In particular, the correlated color temperature (CCT) decreases gradually from 6798 to 3261 K and the color rendering index (CRI) increases from 76.5 to 89.3 with the increasing of the incorporation content of Mg{sup 2+}-Ge{sup 4+} ion pairs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}: A novel blue emitting phosphor for white LEDs

Graphical abstract: Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band. When the temperature turned up to 150 °C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ΔE is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs. - Highlights: • Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band under the 350 nm radiation excitation. • Emission intensity of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is 63.4% (150 °C) of the initial value (30 °C). • The activation energy ΔE for thermal quenching is 0.25 eV. - Abstract: A novel blue emitting phosphor Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is synthesized by a high temperature solid state method. The luminescent property and the thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} are investigated. Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band, and the peak locates at 417 nm which is assigned to the 5d{sup 1}–4f{sup 1} transition of Ce{sup 3+}. It is further proved that the dipole–dipole interaction results in the concentration quenching of Ce{sup 3+} in Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. When the temperature turned up to 150 °C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ΔE is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs.

36 MATERIALS SCIENCE↗

Optimized Phosphors for Warm White LED Light Engines

The objective of this program is to develop phosphor systems and LED light engines that have steady-state LED efficacies (using LEDs with a 60% wall-plug efficiency) of 105–120 lm/W with correlated color temperatures (CCT) ~3000 K, color rendering indices (CRI) >85, <0.003 distance from the blackbody curve (dbb), and <2% loss in phosphor efficiency under high temperature, high humidity conditions. In order to reach these goals, this involves the composition and processing optimization of phosphors previously developed by GE in combination with light engine package modification.

36 MATERIALS SCIENCE↗

Improved photoluminescence properties of a new green SrB{sub 2}O{sub 4}:Tb{sup 3+} phosphor by charge compensation

Highlights: ► New green-emitting SrB{sub 2}O{sub 4}:Tb{sup 3+} phosphor was synthesized by solid-state reaction. ► Li{sup +}, Na{sup +}, and K{sup +} can all increase luminescent intensity of SrB{sub 2}O{sub 4}:Tb{sup 3+}. ► Na{sup +} is the optimal charge compensator among Li{sup +}, Na{sup +} and K{sup +}. ► SrB{sub 2}O{sub 4}:Tb{sup 3+} is a promising green phosphor for fabricating WLED. -- Abstract: A new green-emitting SrB{sub 2}O{sub 4}:Tb{sup 3+} phosphor was synthesized by solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed all the samples with orthorhombic formation of SrB{sub 2}O{sub 4}. The excitation spectra indicate the phosphor can be effectively excited by near ultraviolet (NUV) light, making it attractive as conversion phosphor for LED applications. The phosphor exhibits a bright green emission with the highest photoluminescence (PL) intensity at 544 nm excited by 378 nm light. The critical quenching concentration of Tb{sup 3+} in SrB{sub 2}O{sub 4}:Tb{sup 3+} is about 10 mol%. The effects of charge compensators (Li{sup +}, Na{sup +}, and K{sup +}) on photoluminescence of SrB{sub 2}O{sub 4}:Tb{sup 3+} were also studied. The results show that the emission intensity can be improved by all the three charge compensators and Na{sup +} is the optimal one for SrB{sub 2}O{sub 4}:Tb{sup 3+}. All properties show that the phosphor is a promising green phosphor pumped by NUV InGaN chip for fabricating white light-emitting diodes (WLEDs).

36 MATERIALS SCIENCE↗